I suspect you need to contact the projector's manufacturer to find out what "Active 3D stereo compatible" means to them. In the F35 user's manual I found, it says that it supports HDMI 1.3a, not the 1.4a needed for 3D stereo (may be a typo). And the 3D sync input on the connector panel is "Reserved for future use." Not a good sign. So first, find out what the projector's manufacturer expects to work, then feel free to contact me for more help. I will also need to know what kind of active glasses and emitter you are using (NVIDIA 3D Vision, RealD CrystalEyes, etc.). Good luck, Greg On 10/29/2014 5:08 AM, David Bhella wrote:

Dear colleagues,

I am having some difficulty configuring a 3D projector for use with chimera, so I am hoping that someone may be able to offer some advice. Briefly we have a Projection Design F35 DLP projector that uses DLP-link to synchronise the shutter glasses. I have a Windows 7 PC with an nVidia K-series video card to run the projector (I have to use Windows - please don’t say use linux!). Through the nVidia GUI I set the driver to DLP, but in chimera the image does not seem to be flickering and there is no 3D image, even though the glasses are shuttering. The image is distorted in a similar way to that seen with shutter glasses but it is static. The only way I can get chimera to give a flickering image is when I set it to use the DIN socket, but of course the image is not synched to the glasses.

I would be grateful for any advice on system settings I may need to make to get this working.

Thanks, D.

Dr David Bhella MRC-University of Glasgow Centre for Virus Research Garscube Campus 464 Bearsden Road Glasgow G61 1QH Scotland (UK)

Telephone: 0141-330-3685 Skype: d.bhella

Virus structure group on Facebook: https://www.facebook.com/CVRstructure Molecular Machines - Images from Virus Research: http://www.molecularmachines.org.uk

CVR website: http://www.cvr.ac.uk CVR on Facebook: https://www.facebook.com/centreforvirusresearch