On 10/02/2013 02:35 PM, Thompson, Matthew K wrote:

Can anyone recommend the best camera settings for stereoscope glasses? Mine just don't seem to turn out right.

Double check that the Stereo parameters in the Camera tool are reasonable for your setup. The other thing to check is where the focal plane is -- use the SideView tool and switch the side from 'right' to 'top'. The dashed vertical line, representing the focal plane, should be placed on the near clipping plane to avoid any parallax problems, but some parallax is usually good, so move the focal plane back a bit to cause some of the graphics to pop out of the screen. HTH, Greg