- ChimeraX-users - RBVI Mailing Lists

Sequential model display controls bound to buttonpanel button?
by Oliver Clarke 19 Jan '24

19 Jan '24

Hi all, I really like the new sequential model display controls in the daily build - thank you so much for implementing these! Would it be possible to add them as a command, e.g. nextmodel and prevmodel? This way I could add them to my box of buttons, and have them in the main GUI window, without needing to switch over to the model panel. Cheers Oli

2 3

Re: Increase cofactor size
by Tristan Croll 19 Jan '24

19 Jan '24

(disclaimer: you should probably follow Elaine’s much more extensive advice) “atomspec” just refers to any selection string - e.g. “#1/A:50”, “:LIG”, “sel” etc. On Fri, 19 Jan 2024 at 18:52, Cameron Larson <cllarson(a)ucdavis.edu> wrote: > Thank you for your help. > A silly question, but what is might 'atomspec' be? a range of atoms? > > Thank you, Tristan > > On Fri, Jan 19, 2024 at 11:51 AM Tristan Croll <tcroll(a)altoslabs.com> > wrote: > >> Try "setattr {atomspec} bonds radius {value in Angstroms}". >> >> Best, >> Tristan >> >> On Fri, Jan 19, 2024 at 4:28 PM Cameron Larson via ChimeraX-users < >> chimerax-users(a)cgl.ucsf.edu> wrote: >> >>> Hello, >>> >>> I am using chimeraX to visualize a ligand. I am familiar with the >>> commands to increase protein thickness ('cartoon style protein thickness') >>> but how can I do this for a ligand or other molecule? >>> >>> Really appreciate the help, >>> >>> -Cameron Larson >>> _______________________________________________ >>> ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu >>> To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu >>> Archives: >>> https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/ >>> >> >> Altos Labs UK Limited | England | Company reg 13484917 >> Registered address: 3rd Floor 1 Ashley Road, Altrincham, Cheshire, >> United Kingdom, WA14 2DT >> <https://www.google.com/maps/search/1+Ashley+Road,+Altrincham,+Cheshire,+Uni…> >> > -- Altos Labs UK Limited | England | Company reg 13484917 Registered address: 3rd Floor 1 Ashley Road, Altrincham, Cheshire, United Kingdom, WA14 2DT

2 1

Increase cofactor size
by Cameron Larson 19 Jan '24

19 Jan '24

Hello, I am using chimeraX to visualize a ligand. I am familiar with the commands to increase protein thickness ('cartoon style protein thickness') but how can I do this for a ligand or other molecule? Really appreciate the help, -Cameron Larson

3 2

Question about Cylinder Representation
by Elaine Meng 18 Jan '24

18 Jan '24

Hi Maxine, Somehow I missed your earlier question about how to make cartoon helix tubes straight instead of curved: <https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu…> The short answer is that sorry, ChimeraX currently does not have an option to make them straight. This feature request is in our database as ticket #1242: <https://www.rbvi.ucsf.edu/trac/ChimeraX/ticket/1242> There are some possible workarounds mentioned in the comments on that ticket, namely: ---------------- (1) you could try "define axis" with "perHelix true" and some padding value to show straight cylinders for helices, and then hide the ribbon. The main problem with this workaround is that the other parts of the ribbon do not connect well to the straight cylinders in some places. Example: open 2gbp hide atoms define axis perhelix true padding 2.0 hide helix ribbon Also if you only care about one specific helix, you can hide all of the other straight cylinders and only hide the ribbon for the specific residues in that helix. (2) If you want to modify the Python code in your ChimeraX distribution you can change one line and it will always produce straight helix tubes. The line is 154 in file ChimeraX.app/Contents/lib/python3.9/site-packages/chimerax/atomic/sse.py [** NOTE this is an old comment so the python version is higher now, I believe python3.11 instead of 3.9, and the line number is also different, I believe it's line 166 instead of 154 **] ...on Mac (different location on Windows and Linux, ask if you can't find it) change MIN_CURVE_LENGTH = 13 to MIN_CURVE_LENGTH = 1300 ---------------- I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Resource for Biocomputing, Visualization, and Informatics Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

check waters to a csv file?
by Francisco Murphy Pérez 18 Jan '24

18 Jan '24

In chimerax ... tools -> structure analysis -> check waters Can we get the information from this analysis into a csv file? Can we add also the bfactor? Thanks

2 2

Plotting Difference Map of Electron Density
by Gourav Das 16 Jan '24

16 Jan '24

Greetings everyone! I am trying to plot difference map of electron density using ChimeraX. I have created the cube file using Multiwfn. I want to show red and blue isosurfaces (+0.0012 and -0.0012 a.u., respectively) to represent the regions in which electron density is increased and decreased respectively. Please help me regarding this issue. With regards, Gourav Das Research Scholar Department of Chemistry IIT Kharagpur India

2 1

Different ways to crop out a map region
by Thu Nguyen 16 Jan '24

16 Jan '24

Good afternoon, I am looking for several methods to crop out a map region from a larger density map. So far I know the command "volume region" but to use the command I need to know in advance the grid indices of the region I want to crop. Are there any more convenient methods to crop out a map region (maybe using mouse to directly drag a region from the volume map)? Thank you very much. Best regards, Thu

2 1

Hide arrows/axes
by Lluís Eixerés Ros 16 Jan '24

16 Jan '24

Dear ChimeraX developer, I’m Lluís Eixerés, a PhD student at the Biomedicine Institute of Valencia, Spain. I’m using ChimeraX and after opening a mtz file, these arrows/axes (see figure attached) appeared at the centre of the screen. I have tried to hide them (they also appear after snapshotting) but I can’t. Could you explain me how to do it, please? Thank you. Regards, LL

2 1

Help in Extracting pLDDT confidence Scores in CSV Format from ChimeraX AlphaFold
by Amit Singh 14 Jan '24

14 Jan '24

Dear ChimeraX Developer, I hope this message finds you well. I am reaching out as a newcomer to ChimeraX and Alphafold, seeking guidance on extracting the pLDDT score in CSV format from the best model obtained through ChimeraX AlphaFold. Specifically, I am interested in obtaining information such as Binding Protein, Bond Type, Protein Residue, Peptide Residue, Distance (Å), and the "pLDDT Range Score." Despite my attempts with the B-factor, I have encountered challenges in extracting the pLDDT range confidence score. I would greatly appreciate any assistance or guidance you can provide on this matter. Thank you for your time and consideration. Kind regards, Amit

2 2

Re: Question regarding gaussian filtering
by Tom Goddard 13 Jan '24

13 Jan '24

Hi Dennis, You need to be clearer about what you are trying to achieve "So I guess my question is whether there is a good way to mimick/visualize a lower resolution experimental map using a higher resolution experimental map without considering a sophisticated noise model." If you wanted to mimic a low resolution map for purposes of testing an algorithm (e.g. fitting, segmentation, ...) then the signal to noise at various frequencies would be important. If you just want it to look like a low resolution map to the human eye (why?), well I don't know how much having very different signal-to-noise as a function of frequency will visually alter the appearance. The effects of Gaussian smoothing or simply truncating beyond a certain frequency will create a map that has much higher signal-to-noise then a real low resolution map. You won't see the low resolution noise characteristic of an actual low resolution map. I don't know if that would be visually apparent. Tom > On Jan 10, 2024, at 12:40 AM, Guillaume Gaullier <guillaume.gaullier(a)kemi.uu.se> wrote: > > Hi Dennis, > > A low-pass filter is what you want then: this doesn't dampen signal and noise, simply discards everything past a certain spatial frequency you choose. Just like the low-pass filter applied on-the-fly when using a map as a reference for a 3D refinement or classification job. > I don't know how this can be done in ChimeraX though. > > Guillaume > > From: Dennis Dannecker via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu> > Sent: Wednesday, January 10, 2024 7:15:09 AM > To: Tom Goddard > Cc: chimerax-users(a)cgl.ucsf.edu > Subject: [chimerax-users] Re: Question regarding gaussian filtering > > Hi Tom, > > thank you vey rmuch for the fast and elaborate response. > > I believe I understand it much better now and see why the resolution > per se is not what I am after. > > My intention is to visualize/model the appearance of a lower > resolution map using a higher resolution map. While this should in > principal be possible (the other way around not) but would then > require an appropriate noise model. > > So the gaussian filtering only dampens the amplitudes of the > frequencies in Fourier space. The dampening can be controlled by the > standard deviation of the used gaussian function. The dampening > affects signal and noise equally. > > Does this correspond to a gaussian lowpass filter? Because I was > thinking about removing the high frequencies and setting the cutoff at > different frequencies then corresponding to different "resolutions". > While the resulting map probably has a higher signal-to-noise ratio at > lower frequencies (lower than the cutoff) than an experimental map of > a resolution that this map tries to depict it may still be a good > visual approximation. > > So I guess my question is whether there is a good way to > mimick/visualize a lower resolution experimental map using a higher > resolution experimental map without considering a sophisticated noise > model. > > Thanks again for your help. > > Best > Dennis > > > > Quoting Tom Goddard <goddard(a)sonic.net>: > > > Hi Dennis, > > > > I don't know the answer to your question, but here are some > > thoughts about it. The Gaussian convolution filter just scales the > > Fourier space coefficients by a Gaussian making the higher > > frequencies have lower amplitudes. That is reversible, the high > > frequencies can be scaled back up. So although the real-space > > smoothed map looks lower resolution, it still has the same high > > resolution content. The noise and the signal have both been scaled > > down at high resolutions so the signal-to-noise is just as good at > > those high resolutions. If you did this smoothing on two half-maps > > used to compute the resolution by Fourier shell correlation it would > > still give 2 Angstroms, the smoothing did not change the FSC > > resolution! If you were for example testing a fitting method it > > could easily extract that high resolution information and use it. > > In order to really lower the resolution you would need to add noise > > at high frequencies so the high-frequency signal is lost. > > > > That said you could ask if the noise at high frequencies was not > > scaled down, only the signal, then what would the reduced resolution > > be. We know at the FSC resolution the signal-to-noise ratio is some > > specific value that gives the cutoff correlation. But you would > > need a model of the noise amplitude at other lower frequencies to > > know how attenuating just the signal but not the noise would change > > the resolution. Maybe there is a pretty reliable noise model for > > these cryoEM maps, I'm not sure. > > > > Tom > > > > > >> On Jan 9, 2024, at 2:41 PM, Dennis Dannecker via ChimeraX-users > >> <chimerax-users(a)cgl.ucsf.edu> wrote: > >> > >> > >> Hello, > >> > >> I would like to ask a question regarding the gaussian filtering. > >> > >> I filtered a given map (downloaded from the emdb with the "open" > >> command from chimerax) in chimerax using the following command: > >> > >> vop gaussian #1 sDev X > >> > >> with X taking different values ranging from 0.25 to 20 with different steps. > >> > >> Now I would like to know the resolutions these maps actually > >> correspond to after this gaussian filtering. The originally loaded > >> map is stated to have nominal resolution of 2 Angstroms (GSFSC). > >> sDev defines the standard deviation in Angstrom of the 3D Gaussian > >> function that is used for the filtering. How can one now calculate > >> the resolution these filtered maps correspond to? Is it possible to > >> calculate or state a resolution for these maps that is related to > >> the resolution given for the original map (here 2 Angstroms). > >> > >> Thank you very much. > >> > >> Kind regards > >> > >> Dennis > >> > >> > >> > >> > >> Dennis Dannecker > >> Master Student of Biochemistry > >> Department of Chemistry > >> Faculty of Mathematics and Natural Sciences > >> University of Cologne > >> Albertus-Magnus-Platz > >> 50923 Cologne, Germany > >> _______________________________________________ > >> ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu > >> To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu > >> Archives: > >> https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/ > > > -- > Dennis Dannecker > Master Student of Biochemistry > Department of Chemistry > Faculty of Mathematics and Natural Sciences > University of Cologne > Albertus-Magnus-Platz > 50923 Cologne, Germany > > _______________________________________________ > ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> > To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu <mailto:chimerax-users-leave@cgl.ucsf.edu> > Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/ > > VARNING: Klicka inte på länkar och öppna inte bilagor om du inte känner igen avsändaren och vet att innehållet är säkert. > CAUTION: Do not click on links or open attachments unless you recognise the sender and know the content is safe. > > > > > > > > > När du har kontakt med oss på Uppsala universitet med e-post så innebär det att vi behandlar dina personuppgifter. För att läsa mer om hur vi gör det kan du läsa här: http://www.uu.se/om-uu/dataskydd-personuppgifter/ > > E-mailing Uppsala University means that we will process your personal data. For more information on how this is performed, please read here: http://www.uu.se/en/about-uu/data-protection-policy

2 1

Chimerax background color gradient
by hu.qi＠mayo.edu 12 Jan '24

12 Jan '24

Hello, Is there a way to set a gradient for the Chimerax background color, or use an image? I know Chimerax can do that but not sure how to do it in Chimerax. Any information is appreciated. QH

3 3

Chimerax background color gradient
by hu.qi＠mayo.edu 12 Jan '24

12 Jan '24

Hello, Is there a way to set a gradient for the Chimerax background color, or use an image? I know Chimerax can do that but not sure how to do it in Chimerax. Any information is appreciated. QH

2 3

Re: [Chimera-users] how to play trajectory frames ?
by Elaine Meng 11 Jan '24

11 Jan '24

Hi Mitch, What program are you using? It looks like you may be reading the ChimeraX help, but ChimeraX is a different program than Chimera. If you are using ChimeraX, you may want to ask questions on the chimerax-users(a)cgl.ucsf.edu list and not chimera-users(a)cgl.ucsf.edu ... We try to keep them separate so that people don't get confused. Also if you are actually using ChimeraX, the "coordsets" option of "open" is only for opening PDB or mmCIF files, not XTC. Just leave it out, and simply open both the PSF and XTC with the "coords" option similar to the third example in the ChimeraX help section linked below, except that your trajectory file is XTC and not DCD: <https://rbvi.ucsf.edu/chimerax/docs/user/commands/open.html#traj-options> That just opens the trajectory, it does not play it. To play the trajectory in ChimeraX, you would use the slider GUI and/or the "coordset" command, as mentioned in the help section linked above. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Resource for Biocomputing, Visualization, and Informatics Department of Pharmaceutical Chemistry University of California, San Francisco > On Jan 11, 2024, at 3:57 PM, Mitch Murphy via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > i tried "open 3ft6.psf coordsets true coords 3ft6.xtc" > but i get "'coordsets' has no suffix" error message. > > and with "open 3ft6.psf coords 3ft6.xtc coordsets true" i get "Expected a keyword". > > how do i play frames of a trajectory. i have the psf and xtc or dcd trajectory files available.

3 2

Angular distribution plot in ChimeraX
by Rayees Mattoo 10 Jan '24

10 Jan '24

Hi, I was trying to make an angular distribution plot using .bild file. I want to show the map inside the plot as in the attachment. Few questions: -My map needs to be flipped to get the correct handedness, I think I need to flip the angular distribution plot as well, how to do that? or do I have to go back and get the .bild file for the flipped map? -How can I change the colors and transparency of the angular distribution plot? -Can I get the particle count for each cylinder in the plot? Wanted to show a scale bar for particle distribution around the sphere of the plot. Best Rayees

3 3

Question regarding gaussian filtering
by Dennis Dannecker 09 Jan '24

09 Jan '24

Hello, I would like to ask a question regarding the gaussian filtering. I filtered a given map (downloaded from the emdb with the "open" command from chimerax) in chimerax using the following command: vop gaussian #1 sDev X with X taking different values ranging from 0.25 to 20 with different steps. Now I would like to know the resolutions these maps actually correspond to after this gaussian filtering. The originally loaded map is stated to have nominal resolution of 2 Angstroms (GSFSC). sDev defines the standard deviation in Angstrom of the 3D Gaussian function that is used for the filtering. How can one now calculate the resolution these filtered maps correspond to? Is it possible to calculate or state a resolution for these maps that is related to the resolution given for the original map (here 2 Angstroms). Thank you very much. Kind regards Dennis Dennis Dannecker Master Student of Biochemistry Department of Chemistry Faculty of Mathematics and Natural Sciences University of Cologne Albertus-Magnus-Platz 50923 Cologne, Germany

2 2

Question about Cylinder Representation
by Bi, Maxine 09 Jan '24

09 Jan '24

Hi there, I've been stuck trying to make my cylinder representation straight instead of curved as the default. I've tried many commands that I can find in the documentation. Could you please guide me if there is a way to just make the cylinders straight? There is a command like that in Pymol as an example (see link: https://urldefense.proofpoint.com/v2/url?u=https-3A__urldefense.com_v3_-5F-… ). Thank you so much, Maxine

1 0

retrieve the sequence of an atom selection
by Engeholm, Maik 09 Jan '24

09 Jan '24

Hi there, I'm looking for a neat way to retrieve the sequence of an atom selection (in this case part of a double-stranded DNA molecule) from within a python script. I've been playing around with: selection = run (session, 'select #1/A:2-4|#1/B:6-9') for a in selection.atoms.unique_residues: print(a) which gives me: 151 atoms, 169 bonds, 7 residues, 1 model selected /A DG 2 /A DG 3 /A DG 4 /B G 6 /B G 7 /B A 8 /B T 9 This is a good start, but ideally I'd like to get back a contiguous sequence string for each chain (like (('A', 'GGG'), ('B', GGAT'))). Also, I do not really understand, why residue names are reported as 'DG' for strand A, but 'G' for strand B, which makes extracting a sequence string from the above output quite difficult. I've also tried: selection = run (session, 'select #1/A:2-4|#1/B:6-9') for a in selection.atoms.by_chain: print(a[1]) print(a[2].unique_residues.unique_sequences[0][1]) which gives me: 151 atoms, 169 bonds, 7 residues, 1 model selected A AGGGAGTAATCCCCTTG B CAAGGGGATTACTCCCT This is obviously also not what I want since it returns the entire sequence of each chain. I guess I could take the residue numbers from the first command and use those to slice the strings returned by the second, but that feels a little awkward, and so I was wondering if there was a better, more direct way to achieve this seemingly simple task. Your help would be much appreciated. Cheers, Maik

2 3

ChimeraX : Cannot recommend to my class until minimization with vital cofactors such as FAD, NADH is built in. Returning to Chimera.
by Anne-Frances Miller 09 Jan '24

09 Jan '24

Dear Sir or Madam, After devoting several days to updating three weeks of my course to use ChimeraX instead of Chimera, I am returning to Chimera. ChimeraX may be a great cutting-edge tool, but it is not ready for a wider audience until it can make ‘common’ tasks easy. Please do not distance research from science. We desperately need science to be exciting and accessible to a wide audience. Chimera does that. ChimeraX does the opposite, sending the clear message that only an elite few are deemed worthy. Please please please, open the door to wider use, for the sake of science, and for the sake of the citizens of our country (who fund your agencies via taxes). Very Helpful - To make images with transparent backgrounds, members of my class as not going to type out ’transparentbackground true’ (even my emailer wants to spell the first string as two words). CRUCIAL - in-program minimization that includes critical cofactors (present in >40% of all enzymes and the actual source of their activities often!!) FAD, FMN, NAD(H), how is this anything more than structural biology if the sources of activity are not included? (‘biology’ implies life. Life REQUIRES chemical reactivity.) CRUCIAL - in-program trajectory analysis that can tabulate (for example) a distance, frame-by-frame and allow export in tabular form. Very Helpful - worms with thicknesses that can represent an attribute. These provide a critical orthogonal way to add a second attribute when color is already in use for a first. Very Helpful - Lighting/effects/side view GUI that allows easy optimization of figure reflectivity, special effects, all in one place and does not require users to remember what Cartesian coordinates they gave their first light. It is so much faster and delivers much better results than ChimeraX. This email records the current worst applicability gaps only, I see others have reported more. I would like to like ChimeraX, but as a person trying to bring science to wide audiences, ChimeraX is the best argument for Pymol I have seen in a while. Do not stop supporting Chimera until ChimeraX can serve real humans, please! Sincerely, and thanks to the team, Anne-Frances Novel Meritorious Research (and teaching) —•—•—•—•—•—•—•—•—•—•—•—•—•— A.-F. Miller, Ph. D. (she/elle/sie) University Research Professor Professor of Chemistry University of Kentucky https://www.uky.edu/~afm/ Visiting Fellow, Einstein Foundation of Berlin

2 1

Depth cueing
by Paul Miller 09 Jan '24

09 Jan '24

Hi How do I depth cue in ChimeraX? In Chimera I used to be able to precisely control this from the side view window but I cannot find any way of controlling depth cueing in ChimeraX. Thank you. Cheers, Paul Paul Miller (he/him), PhD University Lecturer in Pharmacology Department of Pharmacology University of Cambridge Tennis Court Road Cambridge CB2 1PD +44 1223 761267 https://www.phar.cam.ac.uk/research/miller

2 2

Hydrophobic comparison
by M.J. 08 Jan '24

08 Jan '24

Hi Dear ChimeraX developers, I met a problem and cannot find a solution on the website. I have a protein that has two conformations, in those two conformations the hydrophobic character is different, I can show them clearly by the command of mlp in Chimerax, super convenient! My question is that is there a way to show the difference quantitatively? or can be shown in one molecule and color the different on one molecule? (What I means is, for conformation A each residue has a parameter for hydrophobic, so as conformation B, can I get the numbers and do a subtraction correspondingly and know which conformation is more hydrophobic quantitatively, and even I can color one of the conformation by the subtraction). Thanks! Best regards! MJ (Mingliang Jin) Postdoc in Yifan Cheng Lab, UCSF 415-2835-171

3 5

Subscribe
by Hernando J Sosa 05 Jan '24

05 Jan '24

How do I subscribe to this (ChimeraX users) list? When I click the subscribe link in: file:///C:/Program Files/ChimeraX/bin/share/docs/contact.html I get an error message (Page not found). Thanks Hernando ___________________________________ Hernando Sosa, PhD. Dept. of Biochemistry Albert Einstein College of Medicine 1300 Morris Park Av. Bronx NY 10461 phone (718) 430-3456 emai: hernando.sosa@einsteinmed.<mailto:hernando.sosa@einsteinmed.org>edu ___________________________________ ________________________________ From: chimerax-users-bounces(a)cgl.ucsf.edu <chimerax-users-bounces(a)cgl.ucsf.edu> Sent: Friday, January 5, 2024 12:42 PM To: Hernando J Sosa <hernando.sosa(a)einsteinmed.edu> Subject: Your message to chimerax-users(a)cgl.ucsf.edu awaits moderator approval CAUTION: This email comes from an external source; the attachments and/or links may compromise our secure environment. Do not open or click on suspicious emails. Please click on the “Phish Alert” button on the top right of the Outlook dashboard to report any suspicious emails. Your mail to 'chimerax-users(a)cgl.ucsf.edu' with the subject Python IDE Is being held until the list moderator can review it for approval. The message is being held because: The message is not from a list member Either the message will get posted to the list, or you will receive notification of the moderator's decision.

2 1

Re: Python IDE
by sette＠uniroma2.it 05 Jan '24

05 Jan '24

Yes. Tools --> General -- Shell Best regards, Marco Il 05/01/2024 18:42, Hernando J Sosa via ChimeraX-users ha scritto: > Dear ChimeraX, > > Does chimera-X come with an IDE to edit and run python scripts?, > something like IDLE in Chimera? > > Thanks > Hernando > > ___________________________________ > Hernando Sosa, PhD. > Dept. of Biochemistry > Albert Einstein College of Medicine > 1300 Morris Park Av. > Bronx NY 10461 > phone (718) 430-3456 > emai: hernando.sosa@einsteinmed. <mailto:hernando.sosa@einsteinmed.org>edu > ___________________________________ > > > > _______________________________________________ > ChimeraX-users mailing list --chimerax-users(a)cgl.ucsf.edu > To unsubscribe send an email tochimerax-users-leave(a)cgl.ucsf.edu > Archives:https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl… -- Dr Marco Sette, PhD. Department of Chemical Sciences and Technology University of Rome, "Tor Vergata" via della Ricerca Scientifica, 00133, Rome, Italy e-mail:sette@uniroma2.it Tel.: +39-0672594424

1 0

Python IDE
by Hernando J Sosa 05 Jan '24

05 Jan '24

Dear ChimeraX, Does chimera-X come with an IDE to edit and run python scripts?, something like IDLE in Chimera? Thanks Hernando ___________________________________ Hernando Sosa, PhD. Dept. of Biochemistry Albert Einstein College of Medicine 1300 Morris Park Av. Bronx NY 10461 phone (718) 430-3456 emai: hernando.sosa@einsteinmed.<mailto:hernando.sosa@einsteinmed.org>edu ___________________________________

1 0

Re: [Chimera-users] Changing threshold value of attributes
by Eric Pettersen 04 Jan '24

04 Jan '24

Hi Abril, There are separate mailing list for Chimera and ChimeraX, so you should send ChimeraX questions to chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> . The problem you ran into has been fixed and the fix is in the 1.7 release candidate, so if you use that then things will work. --Eric Eric Pettersen UCSF Computer Graphics Lab > On Nov 28, 2023, at 10:25 AM, Abril Gijsbers via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Dear community, > > I want to render my model by attribute and change the thresholds (up and bottom limits). I want to change the 0.3 to 0.1 and the 2.6 to 2.7 (see the figure), this way I can compare the colour intensity with other conditions. > <image.png> > > When I do that, I get the following error. My ignorance in command use limits my understanding. Could someone help me out to understand this? I have a colleague that changes the up and bottom limit with no problem. Why? :( > > ui tool show <> "Render By Attribute" > Traceback (most recent call last): > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 759, in _set_value_cb > self._redraw_cb() > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 646, in _redraw_cb > self._bins = left + filled_bins + right > ValueError: operands could not be broadcast together with shapes (0,) (157,) > > ValueError: operands could not be broadcast together with shapes (0,) (157,) > > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 646, in _redraw_cb > self._bins = left + filled_bins + right > > See log for complete Python traceback. > > Traceback (most recent call last): > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 760, in _set_value_cb > self._move_cur_marker(v) > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 570, in _move_cur_marker > self._active_markers._update_plot() > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 1222, in _update_plot > self._update_marker_coordinates() > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 1207, in _update_marker_coordinates > x, y = self._scene_xy(m.xy) > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 1090, in _scene_xy > return self.histogram._scene_xy(abs_xy) > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 512, in _scene_xy > num_bins = len(self._bins) > TypeError: object of type 'function' has no len() > > TypeError: object of type 'function' has no len() > > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 512, in _scene_xy > num_bins = len(self._bins) > > See log for complete Python traceback. > _______________________________________________ > Chimera-users mailing list -- chimera-users(a)cgl.ucsf.edu > To unsubscribe send an email to chimera-users-leave(a)cgl.ucsf.edu > Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimera-users@cgl.ucsf.edu/

5 7

volume amount estimation
by Jesse Hansen 04 Jan '24

04 Jan '24

dear ChimeraX users, We have a tomogram volume (.mrc) which we have segmented different components (stl files; surfaces). Is there any tool available to estimate the volume within each of the cellular components (within each surface)? Either some approximation of the cubic Angstrom/nanometers, or as a percentage of the total tomogram volume. thanks in advance! best Jesse Hansen

3 4