Il 22.10.2024 20:59 Eric Pettersen ha scritto:
Hi Saverio,The surface is based on where a water probe can reach, and is a numerical approximation using a grid-based calculation rather than an analytical solution. Therefore one of the possibilities here is that the grid is too coarse an approximation and isn't fitting the water probe into this snug pocket. You can control the grid spacing with the gridSpacing option of the surface command. The default grid spacing is 0.5, so perhaps try 0.3. The calculation time goes up in cubic fashion as you reduce the grid spacing, so don't go crazy with lowering the value!Another possibility is the 1.4 angstrom radius used to approximate a water probe is simply too big to fit in that pocket. If you still want the surface to go into the pocket, you could specify a lower probe radius with the surface command's probeRadius option.--Eric
On Oct 19, 2024, at 4:14 AM, saverio via ChimeraX-userswrote:
Hi Eric,
yes, the command fixes the problem.
The CYMs are present due to the
presence of five zinc fingers.
Following is the output:
setattr :CYM r name CYSAssigning name attribute to 15 items
Using Amber 20 recommended default charges and atom types for standard residuescoulombic protein
Coulombic values for rep.c3.mgs_charged.pdb_ SES surface #1.1: minimum, -22.87, mean -0.35, maximum 60.32
If possible, another question.
The protein has two magnesium ions coordinated by two Asp and two Glu.
After the surface has been drawn only one Mg is outside whereas the other
one is inside the surface.
In the images what can be seen.
Any suggestions about the reasons why it does so?
Thanks.
Saverio
Il 19.10.2024 02:44 Eric Pettersen ha scritto:
If you run this command before running colombic, does it fix the problem? setattr :CYM r name CYS --EricOn Oct 12, 2024, at 7:13 AM, saverio via ChimeraX-users <chimerax-users@cgl.ucsf.edu> wrote: Hi, I have six representative frames, in pdb format , of six clusters evaluated with cpptraj of a trajectory . For three representative frames the command "coulombic protein" the surface is produced without any problem whereas for the remaining three I receive errors similar to the following text: coulombic protein Using Amber 20 recommended default charges and atom types for standard residues Assigning partial charges to residue CYM (net charge -1) with am1-bcc method Running ANTECHAMBER command: /usr/lib/ucsf-chimerax/bin/amber20/bin/antechamber -ek qm_theory='AM1', -i /tmp/tmp76d1_frw/ante.in.mol2 -fi mol2 -o /tmp/tmp76d1_frw/ante.out.mol2 -fo mol2 -c bcc -nc -1 -j 5 -s 2 -dr n (CYM) (CYM) Welcome to antechamber 20.0: molecular input file processor. (CYM) (CYM) Info: Finished reading file (/tmp/tmp76d1_frw/ante.in.mol2); atoms read (22), bonds read (21). (CYM) Info: Determining atomic numbers from atomic symbols which are case sensitive. (CYM) Running: /usr/lib/ucsf-chimerax/bin/amber20/bin/bondtype -j part -i ANTECHAMBER_BOND_TYPE.AC0 -o ANTECHAMBER_BOND_TYPE.AC -f ac (CYM) (CYM) (CYM) Running: /usr/lib/ucsf-chimerax/bin/amber20/bin/atomtype -i ANTECHAMBER_AC.AC0 -o ANTECHAMBER_AC.AC -p gaff (CYM) Info: Total number of electrons: 94; net charge: -1 (CYM) (CYM) Running: /usr/lib/ucsf-chimerax/bin/amber20/bin/sqm -O -i sqm.in -o sqm.out (CYM) (CYM) Running: /usr/lib/ucsf-chimerax/bin/amber20/bin/am1bcc -i ANTECHAMBER_AM1BCC_PRE.AC -o ANTECHAMBER_AM1BCC.AC -f ac -p /usr/lib/ucsf-chimerax/bin/amber20/dat/antechamber/BCCPARM.DAT -s 2 -j 1 (CYM) (CYM) Running: /usr/lib/ucsf-chimerax/bin/amber20/bin/atomtype -f ac -p bcc -o ANTECHAMBER_AM1BCC.AC -i ANTECHAMBER_AM1BCC_PRE.AC (CYM) Charges for residue CYM determined Assigning partial charges to residue CYM (net charge -1) with am1-bcc method CYM: number of electrons (92) + formal charge (-1) is odd; cannot compute charges for radical species using AM1-BCC method Any suggestions to solve this problem? Thanks. Saverio _______________________________________________ ChimeraX-users mailing list -- chimerax-users@cgl.ucsf.edu To unsubscribe send an email to chimerax-users-leave@cgl.ucsf.edu Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/
_______________________________________________
ChimeraX-users mailing list -- chimerax-users@cgl.ucsf.edu
To unsubscribe send an email to chimerax-users-leave@cgl.ucsf.edu
Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/