Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
Hi Phil, There is a "distance" command, use command "help distance" or see the help at our website here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html
...and many examples of how to specify atoms in the command line here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
Why don't you give it a few tries? We need to "teach a man to fish" since we can't tell thousands of users how to write each command they need for their research.
Or you can just choose the atoms from the screen: first make sure they are displayed so you can actually see them, and then Ctrl-click one, Shift-Ctrl-doubleclick the second one and choose "Distance" from the resulting pop-up menu. This also is described in the help (Selection Context Menus): https://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context
Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 8:30 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
Also, the second method (picking the atoms from the screen) will create and execute a distance command, which will then be shown in the Log to help you figure out how to write similar commands in the future.
Elaine
On Nov 15, 2022, at 9:03 AM, Elaine Meng via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Phil, There is a "distance" command, use command "help distance" or see the help at our website here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html
...and many examples of how to specify atoms in the command line here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
Why don't you give it a few tries? We need to "teach a man to fish" since we can't tell thousands of users how to write each command they need for their research.
Or you can just choose the atoms from the screen: first make sure they are displayed so you can actually see them, and then Ctrl-click one, Shift-Ctrl-doubleclick the second one and choose "Distance" from the resulting pop-up menu. This also is described in the help (Selection Context Menus): https://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context
Best, Elaine
Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 8:30 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
ChimeraX-users mailing list ChimeraX-users@cgl.ucsf.edu Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users
Hi Elaine,
Hi Elaine,
Well I am having fish tonight 😉. I used your suggestion select the atoms on the screen and then run the pop-up distance command and reading the results in the Log. I am still not fully clear about defining atoms and such after reading the atoms page. I will keep working on it.
Thanks for your help.
Phil ________________________________ From: Elaine Meng meng@cgl.ucsf.edu Sent: Tuesday, November 15, 2022 11:03 AM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: chimerax-users@cgl.ucsf.edu chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, There is a "distance" command, use command "help distance" or see the help at our website here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html
...and many examples of how to specify atoms in the command line here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
Why don't you give it a few tries? We need to "teach a man to fish" since we can't tell thousands of users how to write each command they need for their research.
Or you can just choose the atoms from the screen: first make sure they are displayed so you can actually see them, and then Ctrl-click one, Shift-Ctrl-doubleclick the second one and choose "Distance" from the resulting pop-up menu. This also is described in the help (Selection Context Menus): https://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context
Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 8:30 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
Hi Phil, When I used the selection context menu approach (pick atoms from screen) then my Log showed this:
distance /A:310@O4 /A:236@OD1
The / symbol means chain ID, the : symbol means residue number, and the @ symbol means atom name, as explained here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
There are several examples in that page if you scroll down a bit from there.
I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 3:25 PM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Elaine,
Hi Elaine,
Well I am having fish tonight 😉. I used your suggestion select the atoms on the screen and then run the pop-up distance command and reading the results in the Log. I am still not fully clear about defining atoms and such after reading the atoms page. I will keep working on it.
Thanks for your help.
Phil From: Elaine Meng meng@cgl.ucsf.edu Sent: Tuesday, November 15, 2022 11:03 AM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: chimerax-users@cgl.ucsf.edu chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, There is a "distance" command, use command "help distance" or see the help at our website here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html
...and many examples of how to specify atoms in the command line here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
Why don't you give it a few tries? We need to "teach a man to fish" since we can't tell thousands of users how to write each command they need for their research.
Or you can just choose the atoms from the screen: first make sure they are displayed so you can actually see them, and then Ctrl-click one, Shift-Ctrl-doubleclick the second one and choose "Distance" from the resulting pop-up menu. This also is described in the help (Selection Context Menus): https://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context
Best, Elaine
Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 8:30 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
Hi Elaine,
Yes, I picked up the command info also from the Log. It is a good way to learn; thanks for the tip.
I had in the past tried to better understand the details in the Atom Specification page. Some I understood, others, not so much. What has always been a puzzle is why a model number is used? I am assuming now that the # symbol is need to distinguish models when two are loaded in the same session. Make sense? Otherwise, I don't really understand the use of that symbol.
Phil ________________________________ From: Elaine Meng meng@cgl.ucsf.edu Sent: Tuesday, November 15, 2022 6:06 PM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: ChimeraX Users Help chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, When I used the selection context menu approach (pick atoms from screen) then my Log showed this:
distance /A:310@O4 /A:236@OD1
The / symbol means chain ID, the : symbol means residue number, and the @ symbol means atom name, as explained here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
There are several examples in that page if you scroll down a bit from there.
I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 3:25 PM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Elaine,
Hi Elaine,
Well I am having fish tonight 😉. I used your suggestion select the atoms on the screen and then run the pop-up distance command and reading the results in the Log. I am still not fully clear about defining atoms and such after reading the atoms page. I will keep working on it.
Thanks for your help.
Phil From: Elaine Meng meng@cgl.ucsf.edu Sent: Tuesday, November 15, 2022 11:03 AM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: chimerax-users@cgl.ucsf.edu chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, There is a "distance" command, use command "help distance" or see the help at our website here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html
...and many examples of how to specify atoms in the command line here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
Why don't you give it a few tries? We need to "teach a man to fish" since we can't tell thousands of users how to write each command they need for their research.
Or you can just choose the atoms from the screen: first make sure they are displayed so you can actually see them, and then Ctrl-click one, Shift-Ctrl-doubleclick the second one and choose "Distance" from the resulting pop-up menu. This also is described in the help (Selection Context Menus): https://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context
Best, Elaine
Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 8:30 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
Hi Phil, Yes you can omit model number (#1 or whatever it is) if there is only one model, and yes, it is for when you have multiple models open. Otherwise there would not be any way to distinguish between residue 10 in chain A of model 1 vs. residue 10 in chain A of model 2. Several of the examples in that "target specification" page omit the model number.
The symbol # itself just means the number right after it is a model number. You wouldn't really use the symbol by itself without a number. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 16, 2022, at 7:41 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Elaine,
Yes, I picked up the command info also from the Log. It is a good way to learn; thanks for the tip.
I had in the past tried to better understand the details in the Atom Specification page. Some I understood, others, not so much. What has always been a puzzle is why a model number is used? I am assuming now that the # symbol is need to distinguish models when two are loaded in the same session. Make sense? Otherwise, I don't really understand the use of that symbol.
Phil
From: Elaine Meng meng@cgl.ucsf.edu Sent: Tuesday, November 15, 2022 6:06 PM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: ChimeraX Users Help chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, When I used the selection context menu approach (pick atoms from screen) then my Log showed this:
distance /A:310@O4 /A:236@OD1
The / symbol means chain ID, the : symbol means residue number, and the @ symbol means atom name, as explained here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
There are several examples in that page if you scroll down a bit from there.
I hope this helps, Elaine
Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 3:25 PM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Elaine,
Hi Elaine,
Well I am having fish tonight 😉. I used your suggestion select the atoms on the screen and then run the pop-up distance command and reading the results in the Log. I am still not fully clear about defining atoms and such after reading the atoms page. I will keep working on it.
Thanks for your help.
Phil From: Elaine Meng meng@cgl.ucsf.edu Sent: Tuesday, November 15, 2022 11:03 AM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: chimerax-users@cgl.ucsf.edu chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, There is a "distance" command, use command "help distance" or see the help at our website here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html
...and many examples of how to specify atoms in the command line here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
Why don't you give it a few tries? We need to "teach a man to fish" since we can't tell thousands of users how to write each command they need for their research.
Or you can just choose the atoms from the screen: first make sure they are displayed so you can actually see them, and then Ctrl-click one, Shift-Ctrl-doubleclick the second one and choose "Distance" from the resulting pop-up menu. This also is described in the help (Selection Context Menus): https://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context
Best, Elaine
Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 8:30 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
Hi Elaine,
Rather than measure the distance atom by atom, I constructed the following command. Again, I have two chains, and I want to limit the search just to specific atoms affiliated with those residues. The residues I listed are hydrophobic molecules that are interacting at two hydrophobic interfaces defined by the "mlp" command. The atoms refer to those pointing at the second interface.
Here is the command I created, and the error associated with it.
contacts /b:77,81,84@CA1,CA2 /c:76,79,195,109,149,150@CA1,CA2,CH2,CZ2
Error message: No atoms match given atom specifier
Thanks for the help.
Phil ________________________________ From: McClean, Phillip phillip.mcclean@ndsu.edu Sent: Tuesday, November 15, 2022 5:25 PM To: ChimeraX Users Help chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Elaine,
Hi Elaine,
Well I am having fish tonight 😉. I used your suggestion select the atoms on the screen and then run the pop-up distance command and reading the results in the Log. I am still not fully clear about defining atoms and such after reading the atoms page. I will keep working on it.
Thanks for your help.
Phil ________________________________ From: Elaine Meng meng@cgl.ucsf.edu Sent: Tuesday, November 15, 2022 11:03 AM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: chimerax-users@cgl.ucsf.edu chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, There is a "distance" command, use command "help distance" or see the help at our website here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html
...and many examples of how to specify atoms in the command line here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
Why don't you give it a few tries? We need to "teach a man to fish" since we can't tell thousands of users how to write each command they need for their research.
Or you can just choose the atoms from the screen: first make sure they are displayed so you can actually see them, and then Ctrl-click one, Shift-Ctrl-doubleclick the second one and choose "Distance" from the resulting pop-up menu. This also is described in the help (Selection Context Menus): https://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context
Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 8:30 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
Hi Phil, I can't tell what is wrong with your specification. From the error message, I can only say that the specification doesn't match what is in your structure. I'm guessing the atom names are wrong because amino acids don't contain atoms named CA1 and CA2 (amino acids only have one alpha-carbon). If I recall correctly, the only one that has CH2 and CZ2 is tryptophan, but are all the residue numbers you list for chain C tryptophans? If a specific atom name only goes with one residue number, then you can interleave them, e.g. /c:76@ch2:149@cb
The contacts command will already limit the results to pairs of atoms within reasonable contact distance of each other, so maybe you can just try leaving off the atom names, e.g. the following, which works for 4hhb:
contacts /b:77,81,84 /c:76,79,195,109,149,150 log true
But that will find all interactions among all those atoms. If you want to treat them as two separate groups, then you need something like
contacts /b:77,81,84 restrict /c:76,79,195,109,149,150 log true
Or if you want only hydrophobic contacts, there are various ways to limit the set of atoms, e.g. element C (carbon) only:
contacts (/b:77,81,84 & C) restrict (/c:76,79,195,109,149,150 & C) log true
https://rbvi.ucsf.edu/chimerax/docs/user/commands/clashes.html https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html
I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 16, 2022, at 1:42 PM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Elaine,
Rather than measure the distance atom by atom, I constructed the following command. Again, I have two chains, and I want to limit the search just to specific atoms affiliated with those residues. The residues I listed are hydrophobic molecules that are interacting at two hydrophobic interfaces defined by the "mlp" command. The atoms refer to those pointing at the second interface.
Here is the command I created, and the error associated with it.
contacts /b:77,81,84@CA1,CA2 /c:76,79,195,109,149,150@CA1,CA2,CH2,CZ2
Error message: No atoms match given atom specifier
Thanks for the help.
Phil From: McClean, Phillip phillip.mcclean@ndsu.edu Sent: Tuesday, November 15, 2022 5:25 PM To: ChimeraX Users Help chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Elaine,
Hi Elaine,
Well I am having fish tonight 😉. I used your suggestion select the atoms on the screen and then run the pop-up distance command and reading the results in the Log. I am still not fully clear about defining atoms and such after reading the atoms page. I will keep working on it.
Thanks for your help.
Phil From: Elaine Meng meng@cgl.ucsf.edu Sent: Tuesday, November 15, 2022 11:03 AM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: chimerax-users@cgl.ucsf.edu chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, There is a "distance" command, use command "help distance" or see the help at our website here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html
...and many examples of how to specify atoms in the command line here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
Why don't you give it a few tries? We need to "teach a man to fish" since we can't tell thousands of users how to write each command they need for their research.
Or you can just choose the atoms from the screen: first make sure they are displayed so you can actually see them, and then Ctrl-click one, Shift-Ctrl-doubleclick the second one and choose "Distance" from the resulting pop-up menu. This also is described in the help (Selection Context Menus): https://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context
Best, Elaine
Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 8:30 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
ChimeraX-users mailing list ChimeraX-users@cgl.ucsf.edu Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users
Hi Elaine,
First the error in the atom designation was on my end; it should have been CD not CA.
I used your last command and found what I wanted. My goal was to see if hydrophobic interactions were similar across the two hydrophobic faces of a heterodimer. I was using the distance of atoms of the hydrophobic residues as a proxy for hydrophobicity. One model contained the wild type allele of one protein of the heterodimer, while the second model contained the alternate (mutant) amino acid of the same reference protein of the complex. I then used a T-test to determine if the distance varied between complexes.
Nice to figure the answer out with Chimerax.
Thanks again.
Phil ________________________________ From: Elaine Meng meng@cgl.ucsf.edu Sent: Wednesday, November 16, 2022 5:06 PM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: ChimeraX Users Help chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, I can't tell what is wrong with your specification. From the error message, I can only say that the specification doesn't match what is in your structure. I'm guessing the atom names are wrong because amino acids don't contain atoms named CA1 and CA2 (amino acids only have one alpha-carbon). If I recall correctly, the only one that has CH2 and CZ2 is tryptophan, but are all the residue numbers you list for chain C tryptophans? If a specific atom name only goes with one residue number, then you can interleave them, e.g. /c:76@ch2:149@cb
The contacts command will already limit the results to pairs of atoms within reasonable contact distance of each other, so maybe you can just try leaving off the atom names, e.g. the following, which works for 4hhb:
contacts /b:77,81,84 /c:76,79,195,109,149,150 log true
But that will find all interactions among all those atoms. If you want to treat them as two separate groups, then you need something like
contacts /b:77,81,84 restrict /c:76,79,195,109,149,150 log true
Or if you want only hydrophobic contacts, there are various ways to limit the set of atoms, e.g. element C (carbon) only:
contacts (/b:77,81,84 & C) restrict (/c:76,79,195,109,149,150 & C) log true
https://rbvi.ucsf.edu/chimerax/docs/user/commands/clashes.html https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html
I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 16, 2022, at 1:42 PM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Elaine,
Rather than measure the distance atom by atom, I constructed the following command. Again, I have two chains, and I want to limit the search just to specific atoms affiliated with those residues. The residues I listed are hydrophobic molecules that are interacting at two hydrophobic interfaces defined by the "mlp" command. The atoms refer to those pointing at the second interface.
Here is the command I created, and the error associated with it.
contacts /b:77,81,84@CA1,CA2 /c:76,79,195,109,149,150@CA1,CA2,CH2,CZ2
Error message: No atoms match given atom specifier
Thanks for the help.
Phil From: McClean, Phillip phillip.mcclean@ndsu.edu Sent: Tuesday, November 15, 2022 5:25 PM To: ChimeraX Users Help chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Elaine,
Hi Elaine,
Well I am having fish tonight 😉. I used your suggestion select the atoms on the screen and then run the pop-up distance command and reading the results in the Log. I am still not fully clear about defining atoms and such after reading the atoms page. I will keep working on it.
Thanks for your help.
Phil From: Elaine Meng meng@cgl.ucsf.edu Sent: Tuesday, November 15, 2022 11:03 AM To: McClean, Phillip phillip.mcclean@ndsu.edu Cc: chimerax-users@cgl.ucsf.edu chimerax-users@cgl.ucsf.edu Subject: Re: [chimerax-users] Distance between two atoms
Hi Phil, There is a "distance" command, use command "help distance" or see the help at our website here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html
...and many examples of how to specify atoms in the command line here: https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html#hierarchy
Why don't you give it a few tries? We need to "teach a man to fish" since we can't tell thousands of users how to write each command they need for their research.
Or you can just choose the atoms from the screen: first make sure they are displayed so you can actually see them, and then Ctrl-click one, Shift-Ctrl-doubleclick the second one and choose "Distance" from the resulting pop-up menu. This also is described in the help (Selection Context Menus): https://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context
Best, Elaine
Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco
On Nov 15, 2022, at 8:30 AM, McClean, Phillip via ChimeraX-users chimerax-users@cgl.ucsf.edu wrote:
Hi Everyone,
I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command.
Thanks for the help again.
Phil McClean
ChimeraX-users mailing list ChimeraX-users@cgl.ucsf.edu Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users
participants (2)
-
Elaine Meng
-
McClean, Phillip