- Chimera-dev - RBVI Mailing Lists

Re: DelPhi in Chimera
by Thomas Goddard 13 Dec '02

13 Dec '02

Hi Wade, The problem with 1tcr.phi is that it is not the right type of file. It is a text file that gives electric field at each atom position. You can open it in a text editor and see, but Chimera cannot do anything with that file. The DelPhi potential files read by Chimera (*.phi) are binary files that contain a rectangular grid of electric potential values. It looks like the Honig lab server does not provide those. Tom

1 0

Aqua Chimera status
by Thomas Goddard 13 Dec '02

13 Dec '02

Here's a status report on the port of Chimera to the native Mac OS X windowing system Aqua. I have an Aqua Chimera built that can make it through some hand testing showing molecules with different representations and surfaces and show volume data and use some basic user interfaces like side view and model panel and preferences. It also passes all the tests in the Chimera test suite. More testing will be needed to see if everything is working. Showing side view and 1gcn and switching to sphere causes system crash with Radeon 9000. This makes the side view unusable with the Radeon 9000. This crash also occurs on the X windows Mac Chimera. I've reported it to Apple. It does not occur on Eric's GeForce2 MX. To get Tix working I commented out a number of X windows calls and used the standard unix build. Most of this code was #ifdef'ed out for Windows so it should not effect Chimera operation. The one case that is likely to cause problems is an XSetClipRegion() call I commented out. That could cause drawing to run outside the intended bounds. So the Tix port problem looks less severe than I reported before. There are a bunch of Aqua Tk problems. Mouse button 2 and button 3 are exchanged. They are correct in X windows Mac Chimera. Benchmark dialog scrollbar mapped and unmapped continuously when dialog opened. This can disable your whole Mac windowing environment. Sideview multi-tab window keeps OpenGL sideview display on top even when another tab is selected. Mabye a Togl problem. Iconifying main window does not iconify other windows. Pop-up window showing function call arguments in Idle takes focus. Also atom spec popups and toolbar buttons showing popups take focus so button clicks don't go to the desired place. Usually 2 or 3 button clicks works around this. "Data" check button in volume dialog puts "Dat" and "a" on separate lines. Side view "show low res" option menu shows "Fa..." and "T..." instead of False and True. In both cases there is enough space so there is no need for the abbreviations. Clicking on the Idle window puts its menu at the top of the Mac screen. To access the main Chimera menus, need to click on the main graphics window to get them at the top of the Mac screen. Splash screen does not update to show progress messages. It just shows a blank white window until just before it disappears. Tear off menus are in upper left corner of screen under top of screen menu making it impossible to move them. Chimera icon is a separate window. tkwin.wait_visibility() is used by Chimera in splash screen and tkgui.py code and never returns. I commented those out. Requesting multisampling pixel format for side view produces a pixel format but then fails to create graphics context with a bad pixel format error. Need some special case Mac code to work around that bug. I'll try to package up an Aqua Chimera early next week for Eric and Conrad to try on their machines. (I'm working from home tomorrow). Tom

1 0

Re: DelPhi in Chimera
by Thomas Goddard 11 Dec '02

11 Dec '02

Hi Wade, A small 284 Kb 1tcr.phi should not cause Chimera DelPhi Viewer to request too much memory. I suspect the problem is that the DelPhi Viewer extension is not correctly reading the size of the data file from the header. It thinks the phi file is enormous and requests too much memory. The most probable reason for that is the byte order of the DelPhi file is opposite of what is expected. This happens when the Phi file is written on another computer which represents 4 byte integers using the reverse byte order of the computer you are trying to read the data with. Both the Volume Viewer and DelPhi extensions attempt to identify the correct byte order but I am not sure if that works for the DelPhi Viewer. It would be worth trying to open the 1tcr.phi file with the Chimera File/Open... to see if volume viewer can open it. Another possibility is that Chimera really has used up all your computer's memory. How much memory does your machine have? If you email the 1tcr.phi file I can try looking at it with DelPhi Viewer. Tom

1 0

row interleaved stereo support (http://www.vrex.com/developer)
by Jeff Blaney 10 Dec '02

10 Dec '02

Hi, We recently received a VREX twin LCD projector stereo projection system - very cool! Chimera looks great on it. This is the best stereo projection system I've seen. We also got a very clever glass filter that fits over a LCD monitor and enables stereo viewing through passive circularly polarized glasses. It requires row interleaved stereo support, which I currently only have available with VMD. It works great and I think your group and other users would love it. The VRex filter currently is $400 and works with any display card; they currently only support a 15" 1024x768 LCD monitor. Carl Tung from Vrex expects prices will drop; I've got a prototype. It is literally just a glass screen that fits over the LCD screen - no wires or interface of any kind. Would you be willing to add this type of stereo to Chimera? See http://www.vrex.com/developer for details. Thanks, Jeff

2 1

DelPhi in Chimera
by Thomas Goddard 09 Dec '02

09 Dec '02

Hi Wade, If the problem showing the DelPhi file in Chimera is that the file is large you can try giving Chimera more memory. If you are on unix you can use the limit command in a csh shell to see the current limits and to increase the data size limit: % limit cputime unlimited filesize unlimited datasize 131072 kbytes stacksize 8515 kbytes coredumpsize 0 kbytes memoryuse 4092680 kbytes descriptors 4096 files addressspace 4194304 kbytes % limit datasize 512M % limit cputime unlimited filesize unlimited datasize 524288 kbytes stacksize 8515 kbytes coredumpsize 0 kbytes memoryuse 4092680 kbytes descriptors 4096 files addressspace 4194304 kbytes You then need to restart Chimera in that shell where you increased the memory limit. In linux in a bash shell you can use "ulimit -a" to show the limits, and "ulimit -d 500000" to set the limit to 500,000 kbytes = 500 Mbytes. Tom

1 0

Re: Chimera at NCMI
by Thomas Goddard 09 Dec '02

09 Dec '02

Hi Steve, Unfortunately Chimera allows at most one transparent model, with all others opaque if you want correct rendering. As you observed, the models are rendered one after the other, so the second one always appears on top. It would be possible in the future to make volume viewer surfaces render in one model so that all of the surface could be transparent. But then it would not be possible to move one model relative to the other. Would that be useful to you? How important is multiple model transparency to you? Tom > Date: Sat, 7 Dec 2002 14:47:31 -0600 (CST) > From: Steven Ludtke <stevel(a)blake.3dem.bioch.bcm.tmc.edu> > X-X-Sender: stevel(a)id.3dem.bioch.bcm.tmc.edu > Reply-To: sludtke(a)bcm.tmc.edu > To: Thomas Goddard <goddard(a)cgl.ucsf.EDU> > Subject: Re: Chimera at NCMI > In-Reply-To: <200212030001.gB301Ull676766(a)adenine.cgl.ucsf.edu> > Content-Type: TEXT/PLAIN; charset=US-ASCII > X-Filter-Version: 1.9 (cgl.ucsf.edu) > > Hi again. Sorry to keep pestering you. I just ran into another little > problem, and I wanted to find out if its another bug with the NV driver, > or if it's a problem with the vol viewer. > > I just tried to display 2 volume sets simultaneously, and discovered that > it appears that each set is being rendered individually, rather than as > part of the same model. That is, when the structures intersect, I see all > of one structure or all of the other structure rather than proper > clipping/intersecting. Any ideas ? > > TIA! > > -- > ---------------------------------------------------------------------------- > Steven Ludtke, PhD | Baylor College of Medicine > sludtke(a)bcm.tmc.edu | Co-Director > stevel(a)alumni.caltech.edu | National Center For Macromolecular Imaging > V: (713)798-6989 | Dept of Biochemistry and Mol. Biol. > instant messenger: sludtke42 | * Those who do ARE * > http://ncmi.bcm.tmc.edu/~stevel | The converse also holds >

1 0

DelPhi in Chimera
by Thomas Goddard 09 Dec '02

09 Dec '02

Hi Wade, How big is the DelPhi file you are trying to open with DelPhi Viewer in Chimera? Could you send me the Python traceback you get? In addition to the DelPhi Viewer extension you can use the Volume Viewer extension (Extensions/Volumes/Volume Viewer) to look at a DelPhi electrostatics. If you try to open a *.phi file with the Chimera open file dialog it will use Volume Viewer. Volume Viewer can show electrostatic potential isosurfaces. For electrostatics, you may want to show positive and negative isosurfaces in different colors. Using ctrl-click in the Volume Viewer dialog histogram you can add a second threshold level to make a negative potential surface, and you can give it a different color with the color button. One thing the DelPhi Viewer does that Volume Viewer does not do is color a molecular surface. So we would like to get DelPhi Viewer working for you. Tom

1 0

delphi question
by Tom Ferrin 08 Dec '02

08 Dec '02

This email was sent to the "chimera" list, but it's definitely a question for the chimera-dev list instead... ------- Forwarded Message Date: Sun, 08 Dec 2002 12:07:35 +0400 From: "Wade Nasholds" <vesuvius(a)omantel.net.om> To: <chimera(a)cgl.ucsf.edu> Subject: Using output from DelPhi server on Chimera Hello, I have tried to use an output file from the Honig Lab DelPhi server http://lipid.bioc.columbia.edu/~xu/ with Chimera's DelPhi Viewer extension but I get memory/Python error messages. Is it possible to take output from that server and use it in Chimera to visuali ze electrostatic potential surfaces on .pdb files? Could you help me with this or at least put me in contact with someone who can? Thank you very much. Wade Nasholds ------- End of Forwarded Message

1 0

Documentation missing in 1602 release
by Thomas Goddard 06 Dec '02

06 Dec '02

Documentation for several of the recent contributed Chimera extensions did not make it into the release. Some of the missing directories from ContributedSoftware are are: accelerators, benchmark, multalignviewer, phantom, scalebar, structuremeas. This list is from a quick glance and there may be others missing. The links from the Extensions index to these modules are broken. Maybe the 1602 distributions should be repackaged with the complete documentation. Tom

2 1

Re: Chimera at NCMI
by Thomas Goddard 04 Dec '02

04 Dec '02

Hi Steve, Each Chimera model can be active or inactive. This terminology is a bit confusing. It really means movable or fixed. If you bring up the the Model Panel (under Controllers menu) there is a column of checkbuttons so you can activate or deactivate any of the models. Then mouse actions will only move the active ones. For interactive docking you have to switch back and forth alot between rotating all models and rotating just one. I wrote some Python code for another docker to make Chimera accelerators that do this. I include the python code below. It defines keyboard accelerators 0, 1, 2, 3, 4, 5 which activate model #0, #1, ... only. It also defines and accelerator "aa" that activates all models. To use these bring up the accelerator dialog, menu Extensions/Keyboard/Accelerator List. Then change the accelerator file entry field to give the path to the code below, and press the load button. This will be remembered for you next Chimera session so you won't have to do it again. Then turn on the accelerators with the switch on the accelerator dialog. You may want to use Extensions/Manager, click show start buttons, and click the button to autostart accelerators whenever you start Chimera. For more on Chimera accelerators press the Help button on the Accelerator dialog. It explains how to switch between using Midas commands and accelerators. Tom ---- activate_accel.py follows: # ----------------------------------------------------------------------------- # def register_accelerators(): from Accelerators import standard_accelerators, add_accelerator reload(standard_accelerators) standard_accelerators.register_accelerators() add_accelerator('0', 'Activate model 0 only', lambda: activate_model_n_only(0)) add_accelerator('1', 'Activate model 1 only', lambda: activate_model_n_only(1)) add_accelerator('2', 'Activate model 2 only', lambda: activate_model_n_only(2)) add_accelerator('3', 'Activate model 3 only', lambda: activate_model_n_only(3)) add_accelerator('4', 'Activate model 4 only', lambda: activate_model_n_only(4)) add_accelerator('5', 'Activate model 5 only', lambda: activate_model_n_only(5)) add_accelerator('aa', 'Activate all models', activate_all_models) # ----------------------------------------------------------------------------- # def activate_model_n_only(n): from chimera import openModels for m in openModels.list(all = 1): m.openState.active = (m.id == n) # ----------------------------------------------------------------------------- # def activate_all_models(): from chimera import openModels for m in openModels.list(all = 1): m.openState.active = 1

2 1

Re: [chimera-dev] [stevel@blake.3dem.bioch.bcm.tmc.edu: Re: Chimera at NCMI]
by Elaine Meng 04 Dec '02

04 Dec '02

Hi Steve, Not a dumb question - it just takes a while to learn various details. Models can be activated/deactivated for motion in several ways. As long as you have the two things opened as two different model numbers, you can deactivate one of them so that only the other is responsive to interactive movement with the mouse and movement commands (move, turn, etc.). How to activate/deactivate a model for motion: on the Midas Emulator, check/uncheck the box next to the model number http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/chimerawindow.html#emulator OR choose the model in the Model Panel and use the buttons "activate" and "deactivate" http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/modelpanel.html#activate OR toggle the active checkbox in the Molecule Model attributes panel http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/moleculeattrib.html Your mail has alerted me that I should probably also mention this issue in the "mouse manipulation" page. Hope this helps, Elaine =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Elaine C. Meng, Ph.D. Babbitt Lab and Computer Graphics Lab meng(a)cgl.ucsf.edu http://www.cgl.ucsf.edu/home/meng/index.html =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

1 0

[stevel@blake.3dem.bioch.bcm.tmc.edu: Re: Chimera at NCMI]
by Thomas Goddard 04 Dec '02

04 Dec '02

------- Start of forwarded message ------- Date: Wed, 4 Dec 2002 09:48:48 -0600 (CST) From: Steven Ludtke <stevel(a)blake.3dem.bioch.bcm.tmc.edu> X-X-Sender: stevel(a)id.3dem.bioch.bcm.tmc.edu Reply-To: sludtke(a)bcm.tmc.edu To: Thomas Goddard <goddard(a)cgl.ucsf.EDU> Subject: Re: Chimera at NCMI In-Reply-To: <200212030001.gB301Ull676766(a)adenine.cgl.ucsf.edu> Content-Type: TEXT/PLAIN; charset=US-ASCII X-Filter-Version: 1.9 (cgl.ucsf.edu) Hi. I've got a dumb question, but I've been unable to find anything about it in the manual. Is there any way to interactively rotate/translate an individual model ? ie - the sort of thing you might do for manual docking. That is, I have two models loaded, or an isosurface and a model, and I want to change the relative orientation of the two components. The closest thing I could find was in the Midas emulation, with the 'rock' and 'roll' commands. Am I missing something ? cheers... - -- - ---------------------------------------------------------------------------- Steven Ludtke, PhD | Baylor College of Medicine sludtke(a)bcm.tmc.edu | Co-Director stevel(a)alumni.caltech.edu | National Center For Macromolecular Imaging V: (713)798-6989 | Dept of Biochemistry and Mol. Biol. instant messenger: sludtke42 | * Those who do ARE * http://ncmi.bcm.tmc.edu/~stevel | The converse also holds ------- End of forwarded message -------

1 0

About the DMS program in chimera
by Ming Lei 26 Nov '02

26 Nov '02

Dear Sir: I am using the chimera. And I knew it is a updated version of mediaplus. I wonder if there still is dms program to generate the ms input file for docking(SPHEN). If yes, can you tell me how to use it in chimera? Your immediately reply is much appreciated! Best, Ming ___________________________________ Ming Lei Ph.D Postdoctoral Research Associate Department of Chemistry Clark University Worcester, MA 01610 Tel: 1-508-421-3742 (Lab ) 1-508-831-9851 (Apt ) Email: milei(a)clarku.edu

2 1

dms, Chimera
by Elaine Meng 26 Nov '02

26 Nov '02

[I forgot to cc chimera-dev so have enclosed the message to Ming Lei below] Dear Ming, Currently there is no dms program that comes with Chimera. It is something we want to have in the future, however. If you already have MidasPlus, you can continue to use the dms that comes with MidasPlus for making SPHGEN input. Best regards, Elaine =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Elaine C. Meng, R.Ph., Ph.D. Babbitt Lab and Computer Graphics Lab meng(a)cgl.ucsf.edu http://www.cgl.ucsf.edu/home/meng/index.html =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

1 0

Help
by Srinivasan, Mythily 25 Nov '02

25 Nov '02

Hi, I am using Chimera (Windows 2000) operating system. I have a protein complex with two distinct chains. I would like to find the intersections of groups of atoms between the two chains. As I understand from the tutorials for Midas, the & operator should help me. However, I get a syntax error message. Can you please tell me the correct command? Thanking you, Sincerely, Mythily Indiana University School of Dentistry

2 1

[stevel@blake.3dem.bioch.bcm.tmc.edu: Re: Chimera at NCMI]
by Thomas Goddard 25 Nov '02

25 Nov '02

------- Start of forwarded message ------- Date: Mon, 25 Nov 2002 13:37:43 -0600 (CST) From: Steven Ludtke <stevel(a)blake.3dem.bioch.bcm.tmc.edu> X-X-Sender: stevel(a)id.3dem.bioch.bcm.tmc.edu Reply-To: sludtke(a)bcm.tmc.edu To: Thomas Goddard <goddard(a)cgl.ucsf.EDU> Subject: Re: Chimera at NCMI In-Reply-To: <200211251932.gAPJWPdN690278(a)adenine.cgl.ucsf.edu> Content-Type: TEXT/PLAIN; charset=US-ASCII X-Filter-Version: 1.9 (cgl.ucsf.edu) On Mon, 25 Nov 2002, Thomas Goddard wrote: > I don't understand why the installer failed when installing in > /home/stevel/chimera. I just tried the linux installer from the web > in my home directory and it worked. If it works as root for you, that seems > to indicate it is a permissions problem. Can you send me the permissions > on your home directory, "ls -l /home/stevel"? It should also work if > you create the chimera directory first. I tested that and it also > worked. The installer no longer removes an old Chimera. If you try > to install where a Chimera already exists, it will ask you to move it > or delete it yourself (from another shell) before proceeding. Found the problem. Stupidity on my part (as ususal). One machine uses /homes/stevel, the other uses /home/stevel, and I got them backwards. > I agree that the web page should say next to the download link > the date and version of the last release. Currently you have to > follow the release notes link from the home page to check this. > If you already have Chimera running, the Help/Software Updates > menu entry will tell you if you have the most recent version. Good tip. > The Puppet extension for remote controlling chimera uses the Tcl socket > command to listen for socket connections. When a new connection is made > a Tcl event appears in the event loop. I couldn't get that behaviour with > the Python socket module, and I didn't try a separate thread. Using Tcl > socket worked ok, but I don't know if it handles unix domain sockets. > I was using INET domain sockets and Puppet just checks that the connection > is being made from the machine chimera is running on. That is obviously > inadequate security on a multi-user machine. The Puppet extension is not > distributed with Chimera because of this security problem. I think I gave > you a copy several months ago. If you can't find it, I can provide you > another copy of the Puppet Python code. Yeah, I've still got it. I sort of wanted to avoid doing any explicit TCL stuff. I hadn't checked to see how you handle that. Anyway, that answers my question Thx, and sorry to waste your time on the installer thing... - -- - ---------------------------------------------------------------------------- Steven Ludtke, PhD | Baylor College of Medicine sludtke(a)bcm.tmc.edu | Co-Director stevel(a)alumni.caltech.edu | National Center For Macromolecular Imaging V: (713)798-6989 | Dept of Biochemistry and Mol. Biol. instant messenger: sludtke42 | * Those who do ARE * http://ncmi.bcm.tmc.edu/~stevel | The converse also holds ------- End of forwarded message -------

1 0

Re: Chimera at NCMI
by Thomas Goddard 25 Nov '02

25 Nov '02

Hi Steve, I don't understand why the installer failed when installing in /home/stevel/chimera. I just tried the linux installer from the web in my home directory and it worked. If it works as root for you, that seems to indicate it is a permissions problem. Can you send me the permissions on your home directory, "ls -l /home/stevel"? It should also work if you create the chimera directory first. I tested that and it also worked. The installer no longer removes an old Chimera. If you try to install where a Chimera already exists, it will ask you to move it or delete it yourself (from another shell) before proceeding. I agree that the web page should say next to the download link the date and version of the last release. Currently you have to follow the release notes link from the home page to check this. If you already have Chimera running, the Help/Software Updates menu entry will tell you if you have the most recent version. If chimera is installed as root, users can still add their own directory of extensions using Extensions/Manager/Directories tab. Chimera will definitely remain free for academic users. The Puppet extension for remote controlling chimera uses the Tcl socket command to listen for socket connections. When a new connection is made a Tcl event appears in the event loop. I couldn't get that behaviour with the Python socket module, and I didn't try a separate thread. Using Tcl socket worked ok, but I don't know if it handles unix domain sockets. I was using INET domain sockets and Puppet just checks that the connection is being made from the machine chimera is running on. That is obviously inadequate security on a multi-user machine. The Puppet extension is not distributed with Chimera because of this security problem. I think I gave you a copy several months ago. If you can't find it, I can provide you another copy of the Puppet Python code. Tom

2 1

[stevel@blake.3dem.bioch.bcm.tmc.edu: Chimera at NCMI]
by Thomas Goddard 25 Nov '02

25 Nov '02

Steve Ludke in Wah Chiu's group reports some Chimera problems. He uses Linux. Tom ------- Start of forwarded message ------- Date: Mon, 25 Nov 2002 10:42:39 -0600 (CST) From: Steven Ludtke <stevel(a)blake.3dem.bioch.bcm.tmc.edu> X-X-Sender: stevel(a)id.3dem.bioch.bcm.tmc.edu Reply-To: sludtke(a)bcm.tmc.edu To: Thomas Goddard <goddard(a)cgl.ucsf.EDU> Subject: Chimera at NCMI In-Reply-To: <200207230235.g6N2ZVWN661878(a)adenine.cgl.ucsf.edu> Content-Type: TEXT/PLAIN; charset=US-ASCII X-Filter-Version: 1.9 (cgl.ucsf.edu) Hi again. Well, I've started working on using chimera as a visualization extension for another program and I've got a couple more questions/comments from things I've run into recently. : 1) I just downloaded the latest release, but it fails when I try to install it as non-root with a destination of /home/stevel/chimera (see end). 2) One problem I keep running into is when I go to your web page, I have no way to tell if the version I have is the most recent, or if you've put a new one up. Perhaps you could put an upload date on the webpage. A build number might also not be a bad idea... just a suggestion :^) 3) If chimera is installed as root, is there some way for users to include their own extensions ? 4) Since I'm trying to use chimera as a sort of integral extension to one program, and may increase this usage in future, I just wanted to insure that it's not suddenly going to be a commercial product (for academic users anyway). Is this something I can rely on ? 5) Finally, a technical question. Currently I'm spawning a new thread to handle the interprocess communication (I'm using unix-domain sockets for security at the moment). Anyway, the thread solution has a number of problems, of course, largely due to bugs at the moment. I was considering trying to implement an event-loop function instead, perhaps by registering an idle-event in Tk. Just wondering if there is anything I should be aware of before tackling this approach... Thanks, and I really do appreciate all the work you guys have put into chimera. I really hope that the method I'm working on will work. If so, I should be able to garner a couple of hundred additional users for you :^) - ----------------- id> ./chimera1.exe UnZipSFX 5.41 of 16 April 2000, by Info-ZIP (Zip-Bugs(a)lists.wku.edu) extracting: chimera_install_5xJwd7/py2.2.exe extracting: chimera_install_5xJwd7/chimera.exe extracting: chimera_install_5xJwd7/check.py extracting: chimera_install_5xJwd7/installer extracting: chimera_install_5xJwd7/chimera Enter install location [hit enter for default (/usr/local/chimera)]: /home/stevel/chimera /home/stevel/chimera: No such file or directory ERROR in create_install_dir: mkdirhier: failed to make directory ERROR in chimera_final_install: Could not create install dir: '/home/stevel/chimera' result code from installer: 256 Installer returned unexpected return code '256' Cleaning up extract dir, 'chimera_install_5xJwd7' Installation is done; press return. (I tried creating the directory manually too, still fails) - -- - ---------------------------------------------------------------------------- Steven Ludtke, PhD | Baylor College of Medicine sludtke(a)bcm.tmc.edu | Co-Director stevel(a)alumni.caltech.edu | National Center For Macromolecular Imaging V: (713)798-6989 | Dept of Biochemistry and Mol. Biol. instant messenger: sludtke42 | * Those who do ARE * http://ncmi.bcm.tmc.edu/~stevel | The converse also holds ------- End of forwarded message -------

1 0

NVidia, Linux, and Stereo tidbit
by Greg Couch 20 Nov '02

20 Nov '02

1 0

Re: Results from Monday's meeting
by Greg Couch 20 Nov '02

20 Nov '02

Part of the solution would be to use a UNIX domain socket on UNIX and a named pipe on Windows with the permissions set so only the user running chimera can send messages to it. Greg On Tue, 19 Nov 2002, Thomas Goddard wrote: > The two main difficulties with Puppet are registering the helper > application with your web browser, and security. The security problem > is that the Chimera side of Puppet listens on a socket and has no way > of verifying that the request comes from the Chimera user. Currently > it accepts connections only from the localhost, but the connection > could come from another user on the machine. It also has a mode where > Chimera will not execute the Python code sent to it until you press a > Run button on the Puppet dialog. That mechanism is too cumbersome for > real use. > > The security problems would have to be solved before the Chimera installer > could attempt to register Puppet with the user's web browser.

1 0

cvs update
by Greg Couch 18 Nov '02

18 Nov '02

A couple of things -- the release branch changes have been merged back in to the main branch (a.k.a., the HEAD branch). So please update all of your cvs checkouts with the -dP flags to delete removed files and add new ones. Some deleted files were creeping back in. Thanks, Greg

1 0

OSF/1 version is working again
by Greg Couch 15 Nov '02

15 Nov '02

So the web now has a 1.1602 release for Tru64!!! It was a linking problem with a hidden C++ system archive. Greg

1 0

Chimera for OSX
by Michael Giffin 15 Nov '02

15 Nov '02

Is it possible to get a copy of Chimera for OSX? Thanks for your help. ------------------------------------------------------------------- "I was demoted from lead guitar to rhythm and finally to the bass. There was always a frightful fear I would land up as the drummer." -Roger Waters, 1965 Michael Giffin giffin(a)colorado.edu Department of Biochemistry http://ucsu.Colorado.EDU/~giffin/ University of Colorado-Boulder 303-492-4503 -------------------------------------------------------------------

4 4

UI discussion summary
by Conrad Huang 08 Nov '02

08 Nov '02

I've put down what I remember of yesterday's discussions. Please go to https://wwwtest.cgl.ucsf.edu/intranet/chimeradevelopment/uiissues.html and see if I missed anything. Feel free to update the page. Just remember to change the date at the bottom and send out mail when you do. Conrad

3 7

Re: [chimera-dev] Release note suggestions
by Elaine Meng 06 Nov '02

06 Nov '02

Tom G's suggestion on the tutorials part does change the meaning slightly but it probably doesn't matter. Would only matter if someone thought "hey, where did the Menu Functions tutorial go?" Elaine

1 0