April 2009 - Chimera-users - RBVI Mailing Lists

volume planes tool
by Jeff Triffo 22 Jun '16

22 Jun '16

hi folks, anyone know if the volume plane tool will support arbitrary orientation of the plane any time soon? -Jeff

5 7

Question regarding saving PDB in Chimera
by Pancera, Marie (NIH/VRC) [E] 24 Nov '09

24 Nov '09

Hello, I am using Chimera to fit coordinates into EM density. However I have problems when I save with Chimera as the coordinates that I am saving are not the one I see on the screen. Here is what I do: File Save PDB chose the folder A file name A file type The model that I want to save, i.e the one I see on the screen And then I have to select save relative to model, otherwise I am saving the original molecule, the problem is that I am not sure relative to which model I have to save it. IS there an easier way to just save what I can see on the screen? Thanks, Marie

5 7

color scale bar
by Yao Cong 17 Jul '09

17 Jul '09

Hello Chimera developer, I am rendering a PDB file colored according to B-factor value by "render by attribute" tool. How can I generate a color scale bar besides the structure labeling the color scale used? Many thanks, Yao Cong

3 3

sequence viewer
by Gatsogiannis, Christos 13 Jul '09

13 Jul '09

Hi all, i ve just installed the latest daily build version and i´ve noticed that the sequence viewer has a new "look". However, i have difficulties to get used to it... Some examples: -when i want to view the sequence of a pdb file containing seven chains, i get seven different pop-up windows (...) showing the sequences corresponding to the seven different chain ID´s.... -Moreover, it isn´t so "easy" anymore to select aminoacids directly in the sequence viewer (e.g. too many colors) and therefore now i´m selecting residues using only the command line.. My colleagues also prefer the older version.. is there a simple way to install the latest chimera version but keep the old version of the sequence viewer? Thanks! -Christos ------------------------------- Christos Gatsogiannis Insitute of Zoology, Dpt. II cryoEM Lab, AG Markl Joh. v. Müllerweg 6 Johannes Gutenberg University Mainz, Germany +49-6131-3923091 ------------------------------- ________________________________________ Von: chimera-users-bounces(a)cgl.ucsf.edu [chimera-users-bounces(a)cgl.ucsf.edu] im Auftrag von chimera-users-request(a)cgl.ucsf.edu [chimera-users-request(a)cgl.ucsf.edu] Gesendet: Mittwoch, 17. Dezember 2008 21:00 An: chimera-users(a)cgl.ucsf.edu Betreff: Chimera-users Digest, Vol 68, Issue 22 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: (Thermal ellipsoids) anisotropic temperature factor ellipsoids (Eric Pettersen) 2. Re: (Thermal ellipsoids) anisotropic temperature factor ellipsoids (Eric Pettersen) 3. possibilities to save parts of models (selection)? (Sebastian Kruggel) 4. Re: possibilities to save parts of models (selection)? (Elaine Meng) ---------------------------------------------------------------------- Message: 1 Date: Tue, 16 Dec 2008 14:59:34 -0800 From: Eric Pettersen <pett(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] (Thermal ellipsoids) anisotropic temperature factor ellipsoids To: Tom Goddard <goddard(a)cgl.ucsf.edu> Cc: 'Chimera BB' <chimera-users(a)cgl.ucsf.edu> Message-ID: <9A34751B-6356-4AF4-A8C7-31757E5FFBF1(a)cgl.ucsf.edu> Content-Type: text/plain; charset="us-ascii" On Dec 12, 2008, at 10:40 AM, Tom Goddard wrote: > Hi David, > > Ok I see now, it's a matter of choosing the size of each ellipsoid to > have a 50% chance of finding the atom in that volume. This > shouldn't be > too hard but I'll let Eric tackle it if he has time. Hi David, This is one of those things that I'll endeavor to get into Chimera's production version of thermal ellipsoids, but that I can't spare the time for until then. My guess is that the eigenvectors/values of the U matrix are at the 50% probability level, but verifying that would require some research. If you do look into and find that that's not the case, just change the setting of the 'scale' variable of the start of the script to change the ellipsoid sizes to whatever size encloses 50%. --Eric

4 4

Merging models
by Elaine Meng 04 May '09

04 May '09

On Apr 30, 2009, at 1:45 PM, #MAZIAR SOLEYMANI ARDEJANI# wrote: > Hi everybody, > > I'm working with a pdb file (http://www.rcsb.org/pdb/files/2vxi.pdb1.gz > ) made of two models. I need to merge this two models into one. How > can I do that? > > Thanks in advance, > > Maziar S. Ardejani > Lab 9, The Orner Lab > Division of Chemistry and Biological Chemistry > School of Physical and Mathematical Sciences > 21 Nanyang Link > Nanyang Technological University > Singapore 637371 > Hi Maziar, In general, you can merge models with the "copy/combine" button on the right side of the Model Panel (Favorites... Model Panel) or with the "combine" command. <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/modelpanel.html> <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/combine.html> However, I opened 2vxi from the PDB and it is only one model, not two. Maybe you opened it two times by mistake? <http://www.rcsb.org/pdb/explore/explore.do?structureId=2VXI> There are a few cases where structures have so many atoms or chains that the PDB has split them into multiple files (e.g. 3bz1 and 3bz2). If those parts collectively have more than 63 chains it won't work to merge them with Chimera because there are only 63 possible different chain ID symbols. Please send Chimera questions to chimera-users(a)cgl.ucsf.edu and not to me directly, and if possible use an informative "subject" line - thanks! I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

5 7

Re: [Chimera-users] pivot point
by Elaine Meng 30 Apr '09

30 Apr '09

On Apr 30, 2009, at 10:51 AM, Tatyana Fedotova wrote: > Dear Mrs. Meng, > I have a question about pivot point. > Could you explain howfor example I can rotate part of a helix from a > chosen pivot point. > I fount how I can selet and move atoms. But that's not what I need. > Thanks, > Tanya Dear Tanya, I can think of two ways to move only part of a structure rather than a whole model: (a) by rotating bonds, see Adjust Torsions, where the bonds define the pivots <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/structuremeas/stru… > (b) with Movement Mouse Mode, which is probably what you were talking about <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/movemode/movemode.… > Although method (b) does not include control over the center of rotation (pivot point), you can set the center of rotation before using that tool. You can set the center of rotation to an atom or centroid of a set of atoms by selecting the atom(s) and using "Actions... Set Pivot" in the menu. Or, you can use the "cofr" command to do the same thing, or if you have a fairly recent version of Chimera (1.4, so a daily build), specify particular X,Y,Z coordinates as the center. <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/cofr.html> The center of rotation set as described above also applies when you are rotating whole models. In newer versions of Chimera (1.4), the rotation commands "roll" and "turn" also allow specifying the center to use when executing that command. <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/roll.html> <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/turn.html> Please send Chimera questions to chimera-users(a)cgl.ucsf.edu rather than my personal address, unless you are describing private data. Even though I answer a lot of those messages, I might be sick, or on vacation, or not know the answer! Best, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

creating volume maps
by Nils Becker 29 Apr '09

29 Apr '09

Hi, I would like to use chimera for measuring the steric accessibility of particular atoms in a structure to reactive species in solution. To do that I had the following idea: 1. create a volume map which represents a solid sphere centered on the atom in question (alternatively, a Gaussian blob), with some chosen radius. 2. mask this sphere using the solvent accessible surface of the protein (for example, if the atom is at the surface and the surface is flat, half of the sphere would be cut away) 3. measure the volume of the remaining piece of the sphere. So now my question is: can this work, and how can I generate the sphere in step 1. ? thanks for any advice! Nils

2 1

color by element
by Eric Pettersen 28 Apr '09

28 Apr '09

On Apr 28, 2009, at 3:31 PM, Thiruvarangan Ramaraj wrote: > Hi Eric, > > I have a question regarding the colouring by element option. > > If I select a surface and I go to colour and choose by element, does > it colour in any order, if so what is the order, how do i find out > what element is given what colour. > > Thanks for your time > > Thiru Hi Thiru, I'm not sure what you mean by "does it colour in any order", but the colors assigned to each element are described here: http://www.cgl.ucsf.edu/chimera/current/docs/UsersGuide/colortables.html#by… and how you can change them is described here: http://www.cgl.ucsf.edu/chimera/current/docs/UsersGuide/midas/colordef.html --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

Problem recording raytraced movie
by Tom Goddard 28 Apr '09

28 Apr '09

maya shcushan wrote: > Dear Tom, > Thanks, this was very helpful... > I have a new question: I want to make a simple movie in which the molecule > rotates. Using the commands script I found on the internet, the movie is of > very low quality (attached). Moreover, running it with windows media player > shows the opening in the script, embedded in the movie. This were the > commands: > > "movie record > turn y 3 150 > wait 150 > movie encode mformat avi output spin.avi bitrate 4000" > > I want to record the same movie in good quality, like the pictures I get > with pov-raying. I tried running: > "movie record raytrace true > turn y 3 150 > wait 150 > movie encode mformat avi output spin.avi bitrate 4000" > But it falls all the time. > > I looked in the internet for scripts but didn't find an answer. Can you > please help me to create a simple script in which the molecule rotates and > presented in ray-tracing and high quality? > > Thanksm > Maya > > Hi Maya, In Chimera 1.3 before the movie encode command you need the command "movie stop". movie record raytrace true turn y 3 150 wait 150 movie stop movie encode mformat avi output spin.avi bitrate 4000 Otherwise it keeps on recording frames forever. In Chimera 1.4 (daily builds) this is unnecessary and your original script works correctly because in 1.4 movie encode does a movie stop implicitly. Tom

3 2

measure
by julien(GWDG) 28 Apr '09

28 Apr '09

Dear all, I have the last vesion of chimera 1.4 (27371) under a linux machine. I want to use the measure function. I have two models. The difference between this 2 models is a 5 degree rotation around the x axis. >> matrix rotation #1 #0 >>reply in the log Position of test.pdb (#0) relative to test1.pdb (#1) coordinates: Matrix rotation and translation 1.00000000 0.00000000 0.00000000 0.00000000 0.00000000 1.00000000 0.00000000 0.00000000 0.00000000 0.00000000 1.00000000 0.00000000 Axis 0.00000000 0.00000000 1.00000000 Axis point 0.00000000 0.00000000 0.00000000 Rotation angle (degrees) 0.00000000 Shift along axis 0.00000000 I think the command does not work in this version (if I misunderstood the command please tell me as well). It always give me the same answer for any different models I did try. Since I have to ask my admin each time I want to install something, could you just tell me in which version of chimera this command will work. Many many thanks. best Julien -- European Molecular Biology Laboratory Structural and Computational Biology Unit Meyerhofstraße 1 D-69117 Heidelberg Max-Planck-Institute for Biophysical Chemistry NMR based Structural Biology Am Fassberg 11 D-37077 Göttingen

2 1