May 2010 - Chimera-users - RBVI Mailing Lists

volume planes tool
by Jeff Triffo 22 Jun '16

22 Jun '16

hi folks, anyone know if the volume plane tool will support arbitrary orientation of the plane any time soon? -Jeff

5 7

Re: [Chimera-users] Display a spider volume data in a specific orientation
by Elaine Meng 08 May '14

08 May '14

Hi Zongli, This is not my area of expertise (our expert is currently out of town) -- at first I thought you could use "Transform Molecule Coordinates" (under Tools... Movement), but now I see that it works only on atomic structures rather than maps: <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/transform/transfor… > It only works on molecular structures because it actually changes the atomic coordinates, without changing the model transformation. I've figured out one workaround, but it is both crazy and slightly tedious: (1) open your map (say as model 0). (2) open any atomic-resolution structure, it doesn't matter what, and open it twice -- now you have three models. Don't move them separately from the map (yet). Let's say the atomic structures are models 1 and 2. (3) use "Transform Molecule Coordinates" with desired Euler angles and shift on one copy of the atomic structure (say model 1). (4) use the match command to superimpose the other copy of the atomic structure on the one that was transformed: match #2 #1 (the command can use the whole models since they should have exactly the same atoms) (5) use the matrixcopy command to apply the transformation matrix of the second copy of the atomic structure to the map: matrixcopy 2 0 You might think "why do I need two copies of the atomic structure? can't I just transform one copy and then use matrixcopy?" ... in fact that's what I tried first, but after it didn't work, I realized it was because the Transform tool works by changing the coordinate values and not the stored matrix of the model. It is necessary to match the second copy to generate a corresponding matrix, and then matrixcopy can be used. I'm CC-ing the chimera-users(a)cgl.ucsf.edu list in case other Chimera users have suggestions. Our expert Tom G should be back next week and he might also have ideas. In general, it's better to send Chimera questions to that mailing list instead of just me, because I could be away from work or (like now) lacking a good answer! I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Apr 7, 2010, at 11:51 AM, Li, Zongli wrote: > Hi Elaine, > I have a spider volume data (or mrc density map) from which I got a > serious 2D projections. I have the Euler angles for each projection. > Is there a way in Chimera that I can use those Euler angles to > display the 3D spider volume data (or mrc density map) in a specific > orientation that corresponding to that 2D projection? > Thank you very much in advance. > Best, > Zongli > > **************************************** > Zongli Li, Ph.D. > > Howard Hughes Medical Institute > Department of Cell Biology > Harvard Medical School > C Building, Room 420B > 240 Longwood Avenue > Boston, MA 02115 > > Tel: 617-432-4095 (Office) > 617-432-4708 (EM Suite) > 617-432-4091 (Computer room) > Fax: 617-432-1144 > Email: zongli_li(a)hms.harvard.edu > *************************************** >

3 5

square of density volume
by 仁田亮 12 May '11

12 May '11

Hi chimera users, I want to calculate the square value for the volume of the electron density because I want to calculate the variance map. Do anyone know whether we can calculate the square value of the volume by chimera? And if we can, could you teach me how to calculate? Thanks for your time and help, Ryo

5 12

Silhouette edges around dashed wire-style bonds
by Dipl.-Ing. Thomas Mitterfellner 05 Jan '11

05 Jan '11

Hello! In some of my structures, I need dashed bonds to indicate hydrogen bonding or metal complexation. As I understand it, in order for bonds to be displayed as dashed, they need to be wire-style. I wondered if silhouette edges could also be extended to these wire-style bonds? Alternatively, could stick-style bonds possibly be displayed in a dashed fashion? Maybe as a series of cylinders, each separated by a certain distance, or eg. as a series of equally spaced small spheres. Thank you, Thomas

4 3

Vector artwork
by Mallela, Krishna 01 Jun '10

01 Jun '10

Hi, In Chimera, how do I save the image into a vector artwork which can be edited by Adobe Illustrator? Krishna -- Krishna M. G. Mallela, Ph. D. Assistant Professor of Biophysical Chemistry Department of Pharmaceutical Sciences University of Colorado Denver C238-P15, Research 2 12700 E 19th Ave Aurora, CO 80045

2 1

Re: [Chimera-users] Using Chimera to read SMILES string into structure
by Robert Hanson 01 Jun '10

01 Jun '10

Elaine, I picked up this thread off the web archives. I've just implemented reading SMILES into Jmol ( http://chemapps.stolaf.edu/jmol/docs/examples-11/new.htm), but I'm pretty dissatisfied with that IU service. Do you know what they are really doing for that? For example, in that one you have there, *C\C=C/C=C/CCCCCCCCCO I note that **C\C=C/C=C\CCCCCCCCCO * gives the same result. Far as I can tell they require C\C=C//C=C\CCCCCCCCCO which as far as I can tell is invalid SMILES. At least, Daylight's DEPICT thinks it is invalid. It has also made several mistakes with relatively simple stereochemistry that I have tried. Is this your experience as well? Bob Hanson principal developer, Jmol -- Robert M. Hanson Professor of Chemistry St. Olaf College 1520 St. Olaf Ave. Northfield, MN 55057 http://www.stolaf.edu/people/hansonr phone: 507-786-3107 If nature does not answer first what we want, it is better to take what answer we get. -- Josiah Willard Gibbs, Lecture XXX, Monday, February 5, 1900

2 1

attributes
by sette＠uniroma2.it 28 May '10

28 May '10

Hi, I created my attribute file (attached) and defined by I cannot see it in the Render (by residues) attributes. I missed something? Since it was defined I don't think it has to be put in some particolar directory, or not? Thanks, Marco Dr.Marco Sette, Ph.D. Department of Chemical Sciences and Technology University of Rome, "Tor Vergata" via della Ricerca Scientifica, 00133, Rome, Italy e-mail: sette(a)uniroma2.it e-mail: m77it(a)yahoo.it Tel.: +39-0672594424 Fax: +39-0672594328 ---------------------------------------------------------------- Invito da parte dell'Ateneo: Il tuo futuro e quello della Ricerca Scientifica hanno bisogno del tuo aiuto. Dona il 5 x mille all'Universita' di Roma Tor Vergata codice fiscale: 80213750583 http://5x1000.uniroma2.it

2 2

Virus Capsid Reconstruction--Slow Performance
by Carlos Lopez 27 May '10

27 May '10

Hello, I am currently trying to make a pseudo-atomic resolution model of a virus capsid, but I've run into memory problems whenever I try to combine all the asymmetric units together into one large PDB file composed of 60 copies of the asymmetric unit arranged using icosahedral symmetry. My problem is that I keep running out of memory, and I was wondering whether this is normal for the dataset I'm working on. The method I use has worked fine for smaller models, so I'm sure I'm running into the memory problems because this model is particularly large, but I still wanted to check with you guys to see what else I could try. I first start out with an asymmetric unit composed of 52 copies of protein gp24 (PDB ID: 1YUE [monomer] and 1Z1U [hexamer]). That is, I use 8 hexamers and 4 monomers. The individual chains in the unit are stripped to their alpha-carbon backbone by removing all their residues (including the solvent) to minimize how much memory they take up. The monomer weights 47.274 kDa (with residues), so that gives about 22,347 total residues for the asymmetric unit. After stripping off everything except the backbone, I ended up with a 6.4 MB PDB file. After positioning the model, I then run the command sym #1 group i,222r. This creates the 59 other copies in the expected locations. The problem arises when I try to combine all the units together into one model. Having all the models open takes up about 10 GB (out of my machines 16 GB) worth of memory, though there is still some inactive and free memory left. When I then use the copy/combine command, the memory required rises steadily until it starts to page out to the swap space and bring the machine to a grinding halt. I tried leaving it to run overnight (+18 hours), but even then it still wasn't finished. To recap: I'm trying to do a memory intensive reconstruction. I've already: 1) closed all the other models I'm not working on 2) closed all other programs on the machine 3) removed all the side chains so I'm only working with the alpha-carbon backbone 4) tried the chimera --nogui option to send the commands without having to render the graphics It's still having issues, so I was wondering if you had any additional ways I can cut down on the memory usage enough to combine the units into one map. Here are some of the things I'm still thinking of checking on: 1) Running the job on a computer with no graphics card but more RAM than my desktop station. I am able to SSH to the machine and send instructions through the console and the chimera --nogui option. Is it a problem that it doesn't have a graphics card? 2) Checking for a memory leak in Chimera--I've noticed that sometimes not all the memory is given back when I manually close models in the model panel. How can I check for sure/fix it from within a session? I've been able to deal with this by closing my session and opening it again, but it'd be best to be able to do it from within a session. 3) My system keeps saying I still have 4 GB of inactive RAM, though it's never used. I don't know if this is an issue with Chimera or with my machine, but I'll try to find out. If you need any more info, please let me know. Thank you for your help! ~Carlos Lopez My system specs: Mac Pro 4,1 Mac OS X 10.6.3 Quad-Core Intel Xeon, 2.66 GHz 1 proc, 4 cores 16 GB memory Graphics Card NVIDIA GeForce GTX 285, VRAM total: 1024 MB Chimera: Alpha version 1.5 build 30286 2010-03-23 platform: darwin 64bit, windowing system: aqua

2 1

a simple question
by Amitoj Chopra 27 May '10

27 May '10

Is there any way to use the R script and bio3d package to open a pdb with Chimera using R? Thank you. Amitoj

2 1

locking docking
by Alex Perálvarez Marín 27 May '10

27 May '10

Dear all, after running a Docking, I want to build a covalent bond between the receptor and the ligand and then run MD simulations. Is it done with the "build structure" menu? There is another way of doing it? Probably this has been discussed earlier, can you direct me to that topic? Thanks a lot! Alex

2 1

Chimera-users May 2010