May 2010 - Chimera-users - RBVI Mailing Lists

creating virus capsid
by Elaine Meng 27 May '10

27 May '10

On May 25, 2010, at 10:39 PM, 江一波 wrote: > hello meng! > how can i construct a virus by chimera? > i have get a nucleocapsid protein about a virus from > http://www.rcsb.org/pdb/results/results.do?outformat=&qrid=9B6E87D9&tabtosh… > such as ,i get ID :2I9F structure...one of a nucleocapsid for a virus ...this is symmetrical structure! > i want construct a virus ...how can i do? is there somethings paper about how to construct ? > thank you!!! Sometimes the PDB file will include matrix information needed to build the capsid. If it does, you can use the Chimera tool "Multiscale Models" to show the whole thing. However, the authors of this structure (2I9F) did not include the necessary information in the PDB file. Next I tried to see if that structure is in VIPERdb, which would also allow showing the whole thing in Chimera. However, when I tried "File... Fetch by ID" and entered 2i9f for the VIPERdb database, it was not found. Sorry, I don't have any ideas about how to make a whole capsid from this structure. A different structure that does include the information is 1POV. If you open that one, then start Multiscale Models (under Tools... Higher-Order Structure) and click the "Make models" button near the bottom, it will show the whole capsid. Please send Chimera questions to the chimera-users(a)cgl.ucsf.edu address. Thanks, Elaine ------------------------------ Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

3 2

translation of proteins with added pseudobonds
by Joern Lenz 26 May '10

26 May '10

Dear all, here is my problem: I have a protein and added pseudobonds that make up a triangle in order to highlight a pharmacophore. However, as soon as I loaded in the pseudobonds and translate my protein afterwards, the triangle made of pseudobonds does not do the same translation but kept being at its original position. Is this a bug or am I doing something wrong ? Any answer is much appreaciated. Cheers, Joern

2 1

problems reading .rec file
by Shawkey,Matthew D 25 May '10

25 May '10

Hi, I have a .rec density map 2000x2000x1000 (xyz) but when i open it in Chimera it only shows the first image of the series (i.e. the dimensions are 2000x2000x1). do i need to convert it to a different format? thanks Matt ***************************** Matthew D. Shawkey, Ph.D. Assistant Professor Department of Biology Integrated Bioscience Program University of Akron Akron, OH 44325-3908 (office) +1 330-972-8192 (lab) +1 330-526-3225 http://gozips.uakron.edu/~shawkey

3 2

measure rotation rod
by le monk 25 May '10

25 May '10

Hi all, I have used measure rotation to draw a rod down an axis of symmetry. Does anyone know a way of altering the diameter, length and color of the rod? Many thanks _________________________________________________________________ http://clk.atdmt.com/UKM/go/197222280/direct/01/ We want to hear all your funny, exciting and crazy Hotmail stories. Tell us now

2 1

prmtop
by richardbonnet 24 May '10

24 May '10

Dear, Is there a way to use writeprmtop with the command line? Is it a way to use chimera to write prmtop amd inpcrd files for a ligand (gaff type + am1-bcc charge) + the corresponding protein (Gasteiger charges + ff99sb) with the command line? I have lot of problems with input format for antechmaber. It can intersting to use chimera with the command line to solve this type of stuff. Thank a lot per avance, Richard Bonnet

2 1

Amino acid substitution with Chimera
by Hayeon Kwak 19 May '10

19 May '10

Hi, I am currently working on a homology-modelled protein. How do I mutate a certain amino acid with Chimera? For example, if I wanted to mutate 55N into 55K to look at how the structure changes, what would I do? Any help would be appreciated. Thank you.

2 1

Re: [Chimera-users] weighted distance
by Greg Couch 19 May '10

19 May '10

On 05/19/2010 02:07 PM, Eric Pettersen wrote: > Hi Bala, > > On May 18, 2010, at 2:04 AM, Bala subramanian wrote: > >> 1) When i type help(object) in chimera's python shell, it shows the >> help message, is there any to way to make the help information to be >> displayed in a separate window. I tried in config setting but i >> couldnt make it. > > I don't know of any way to make help() output go elsewhere. > Here's a technique to bring up the help() documention in your web brower: (1) start the IDLE tool in chimera (2) type into the IDLE dialog: import pydoc pydoc.gui() At that point, pydoc brings up a dialog where it says it started up a web server on your computer and you can "open browser" to browse all of the builtin chimera and Python documentation. There are a couple downsides: (1) chimera becomes unresponsive until you press the "quit serving" button and then chimera exits -- so browse the documentation with one chimera and program in another, (2) pydoc fails for some chimera modules, e.g., the important chimera module -- that's a pydoc bug unfortunately. - Greg

1 0

weighted distance
by Bala subramanian 19 May '10

19 May '10

Dear Friends, Is there any way to display weighted distance in chimera. For example, in the attached data file, we have distance in column 1 and its corresponding importance in column 2. What i would like to do is to load the structure, display the distance between two group of residues and adjust the width of the line (created by distance monitor) according to the importance of the distance in the data file. Thank you, Baa

4 9

Re: [Chimera-users] Grouping models
by Thomas Goddard 19 May '10

19 May '10

Hi Thomas, I don't understand well enough what you are doing. You can move several models at once with commands like turn y 30 models #15-25 coord #1 which will rotate models 15 through 25 about the y axis of model 1 by 30 degrees. I'm not sure if a Chimea command can save multiple PDB models in a single file. It looks like the "write" command can't do that. I'm not sure why it would be limited since the Chimera Save PDB... dialog can save multiple models. Probably Elaine or Eric can explain that. You could use the "combine" command to make one molecule from several molecules using multiple chains, but PDB format is limited to 62 chains (single letter upper/lowercase/number chain identifier). The combined molecule could then be saved with the "write" command. Tom > Hi Tom, > > we are working at the interphase of EM and atomic structures and would > like to do some interactive docking/prediction/validations etc . So our > wish would be if we can use chimera in an automatic fashion to load > atomic coordinates and simulate the structures by positioning them at > various positions within a volumetric box (such as applying a rotation, > turn around x, etc). The problem that we have is that we have to load > many structures (>60 !) at the same time as we are working with a highly > oligomeric complex. It would be great, if we can use a chimera > command-line based option to do the modifications of coordinates on a > sub-group of the loaded structures (Q: can we group several models > easily ?) and save the new coos in a single file. For now, we would need > to do it by hand, as we couldn't find a command line based saving > options into a single pdb-file .... but this can be quite tedious, if > one would like to test hundreds of possibilities. Do you have a > procedure that you would recommend for generating such simulations (for > now, we treat the structures as rigid bodies) ? > > Best, > -Thomas > >

2 1

Saving BRIX volume file, missing data
by Thomas Goddard 18 May '10

18 May '10

Hi Miguel, I just tested saving volume data in BRIX file format on Chimera 1.4 and also with the current daily build and both worked correctly, nothing left out. Could you send me an MRC map that when I open it and save it as BRIX does not work correctly? Also please give me the exact Chimera version and operating system (Help / About Chimera...). BRIX format saves only 8-bit values. So if you have a large range of values -- say most map values are 0-10 and then one is 10000, then all the 0-10 values will be reduced to the same value (0) when it is forced into the 8-bit BRIX value range by a linear scaling. Thanks, Tom > Hi Tom, > > Thank you! This way I can extend the number of total torsions at least ten times, though I'm not sure I'm gaining much with that. I will see better once I start filling VdW volumens. > > Just a remark: I have noticed something wrong with brix format maps: they are not saved properly, a part of them is left out. I haven't found out whether this is a problem with a certain count threshold, or a number of grid points, the fact is that a good part of the map is lost. This happens whether I save it from the script as you say or from the GUI using the File menu of the Volume Viewer. So I am using MRC format for the time being, which works fine in all cases. > > Best regards, > > > Miguel > > Le 17 mai 2010 à 19:40, Thomas Goddard a écrit : > >> Hi Miguel, >> >> The Python call to save your volume data model v in a file is >> >> v.write_file('/tmp/myfile.brix', format = 'dsn6') >> >> If you do not want to create the volume model you can instead directly write out the grid object. >> >> from VolumeData import save_grid_data >> save_grid_data(grid, path, format) >> >> I figured this out by looking at the write_file() Python code in >> >> chimera/share/VolumeViewer/volume.py >> >> The allowed formats are listed in the file_writers variable in >> >> chimera/share/VolumeData/fileformats.py >> >> Tom >>

1 0

Chimera-users May 2010