January 2011 - Chimera-users - RBVI Mailing Lists

volume planes tool
by Jeff Triffo 22 Jun '16

22 Jun '16

hi folks, anyone know if the volume plane tool will support arbitrary orientation of the plane any time soon? -Jeff

5 7

Re: [Chimera-users] Display a spider volume data in a specific orientation
by Elaine Meng 08 May '14

08 May '14

Hi Zongli, This is not my area of expertise (our expert is currently out of town) -- at first I thought you could use "Transform Molecule Coordinates" (under Tools... Movement), but now I see that it works only on atomic structures rather than maps: <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/transform/transfor… > It only works on molecular structures because it actually changes the atomic coordinates, without changing the model transformation. I've figured out one workaround, but it is both crazy and slightly tedious: (1) open your map (say as model 0). (2) open any atomic-resolution structure, it doesn't matter what, and open it twice -- now you have three models. Don't move them separately from the map (yet). Let's say the atomic structures are models 1 and 2. (3) use "Transform Molecule Coordinates" with desired Euler angles and shift on one copy of the atomic structure (say model 1). (4) use the match command to superimpose the other copy of the atomic structure on the one that was transformed: match #2 #1 (the command can use the whole models since they should have exactly the same atoms) (5) use the matrixcopy command to apply the transformation matrix of the second copy of the atomic structure to the map: matrixcopy 2 0 You might think "why do I need two copies of the atomic structure? can't I just transform one copy and then use matrixcopy?" ... in fact that's what I tried first, but after it didn't work, I realized it was because the Transform tool works by changing the coordinate values and not the stored matrix of the model. It is necessary to match the second copy to generate a corresponding matrix, and then matrixcopy can be used. I'm CC-ing the chimera-users(a)cgl.ucsf.edu list in case other Chimera users have suggestions. Our expert Tom G should be back next week and he might also have ideas. In general, it's better to send Chimera questions to that mailing list instead of just me, because I could be away from work or (like now) lacking a good answer! I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Apr 7, 2010, at 11:51 AM, Li, Zongli wrote: > Hi Elaine, > I have a spider volume data (or mrc density map) from which I got a > serious 2D projections. I have the Euler angles for each projection. > Is there a way in Chimera that I can use those Euler angles to > display the 3D spider volume data (or mrc density map) in a specific > orientation that corresponding to that 2D projection? > Thank you very much in advance. > Best, > Zongli > > **************************************** > Zongli Li, Ph.D. > > Howard Hughes Medical Institute > Department of Cell Biology > Harvard Medical School > C Building, Room 420B > 240 Longwood Avenue > Boston, MA 02115 > > Tel: 617-432-4095 (Office) > 617-432-4708 (EM Suite) > 617-432-4091 (Computer room) > Fax: 617-432-1144 > Email: zongli_li(a)hms.harvard.edu > *************************************** >

3 5

font size in pull-down menus
by Boaz Shaanan 09 Oct '13

09 Oct '13

Hi, Is there a way to change the font size of the pull-down menus? For some reason on the Windows (XP) v.1.5.1 they seem smaller to me. Nothing in terms of graphics (or my eyesight) has changed since I upgraded to 1.5.1 recently. Thanks, Boaz Thanks, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 ; Fax: 646-1710 Skype: boaz.shaanan‎

2 1

color surface based on NMR Order parameters
by lalit.deshmukh＠huskymail.uconn.edu 08 Sep '11

08 Sep '11

Hello, I like the 'surface color ' feature in Chimera. I think, right now, the surface can be colored by radius, height, volume data and so on.. Is it also possible to color the surface based upon the NMR order parameters or intensity ratios (it will be an Excel file containing just two columns: residue numbers and the respective parameter values)? Or this can be done in some other way? Thanks in advance, Regards, Lalit Deshmukh, University of Connecticut Storrs, CT 06269

5 8

square of density volume
by 仁田亮 12 May '11

12 May '11

Hi chimera users, I want to calculate the square value for the volume of the electron density because I want to calculate the variance map. Do anyone know whether we can calculate the square value of the volume by chimera? And if we can, could you teach me how to calculate? Thanks for your time and help, Ryo

5 12

color bond distance, angle and so on
by Jean-Didier Maréchal 08 Mar '11

08 Mar '11

Hi guys, How can I change the color of the labels associated to distance between atoms, angles etc (both the for the text and the dashes). Thanks a lot JD **************************** Dr. Jean-Didier Maréchal Lecturer The Computational Biotechnological Chemistry Team Unitat de Química Física Departament de Química Universitat Autònoma de Barcelona Edifici C.n. 08193 Cerdanyola (Barcelona) Tel: +34.935814936 e-mail: JeanDidier.Marechal(a)uab.es www: http://asklipio.qf.uab.es

5 8

surface hydrophobicity display
by Elaine Meng 03 Feb '11

03 Feb '11

Hi Sumitro, I did a little more digging for related information and thought I would share -- however, none of these methods are available in Chimera currently. Miguel Ortiz Lombardia has pointed out that the GRID program calculates a hydrophobic potential, and sent us the following links: <http://biop.ox.ac.uk/www/lj2000/noble/noble_02.html> <http://www.moldiscovery.com/docs/vsplus/grid.html> -- the following web server sounded promising, but apparently no longer exists: PLATINUM: a web tool for analysis of hydrophobic/hydrophilic organization of biomolecular complexes. Pyrkov TV, Chugunov AO, Krylov NA, Nolde DE, Efremov RG. Bioinformatics. 2009 May 1;25(9):1201-2. <http://www.ncbi.nlm.nih.gov/pubmed/19244385> -- the following paper discusses what surface properties of the receptor correlate well with the types of nearby ligand atoms. If I understood it correctly, they looked at how successfully Coulombic electrostatic potential and the gradient in that potential can be used to identify hydrophobic areas of surface (areas that bind hydrophobic atoms in the ligand). Both were somewhat successful, but even better was a simple definition of hydrophobic surface as the part of the surface that is not close to hydrogen-bonding groups. This paper is fairly old and the data set of ligand/receptor structures small. Definition and display of steric, hydrophobic, and hydrogen-bonding properties of ligand binding sites in proteins using Lee and Richards accessible surface: validation of a high-resolution graphical tool for drug design. Bohacek RS, McMartin C. J Med Chem. 1992 May 15;35(10):1671-84. <http://www.ncbi.nlm.nih.gov/pubmed/1588550> -- then there are some other complicated functions based on molecular fragments and distances among them and to the molecular surface: A new approach to analysis and display of local lipophilicity/hydrophilicity mapped on molecular surfaces. Heiden W, Moeckel G, Brickmann J. J Comput Aided Mol Des. 1993 Oct;7(5):503-14. Estimating and representing hydrophobicity potential Fauchere et al. Journal of Molecular Graphics Volume 6, Issue 4, December 1988, Pages 203-206 If I understood correctly, these have many parameters and the functional form is not simple. It would not be straightforward to put them into Chimera. Finally, I also saw that the program MDL Chime has something called hydrophobic potential display, but I couldn't find a description of how it really works -- it might just be coloring whole amino acids by hydrophobicity value like Chimera does now, or atoms based on element. Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

5 9

exporting the 2drms values
by Bala subramanian 31 Jan '11

31 Jan '11

Friends, I used Ensemble match command to calculate the 2rmsd of multiple pdb files concatenated in a single pdb file. I would like to know if there is any way to save the values (as a matrix). Precisely how to output the ensemble match values. Thanks, Bala

2 3

Surface electrostatic and hydrophobicity.
by Sumitro Harjanto 28 Jan '11

28 Jan '11

Hi elaine, I've a few questions to ask about colouring surface by electrostatic potential and hydrophobicity: 1. I understand that I can use render by attribute to show surface hydrophobicity. But because it's a residue attribute, any surface of the same residue will be getting the same colour. Is there a way to calculate the surface hydrophobicity based on atoms in the vicinity instead of simply using the residue hydrophobicity values? 2. Because I have problem installing delphi, I have resorted to using the coulomb surface colouring tool. How different is this from the procedure of adding hydrogen, adding charge, then render by attribute ? Will I expect to see the same result ? Thanks elaine! Cheers, Sumitro Institute for Infocomm Research disclaimer: "This email is confidential and may be privileged. If you are not the intended recipient, please delete it and notify us immediately. Please do not copy or use it for any purpose, or disclose its contents to any other person. Thank you."

2 2

Error in SASA calculation
by Aditya Padhi 28 Jan '11

28 Jan '11

Hi Elaine, Hope you are fine. If you remember I was calculating per residue SASA using Chimera for my MD simulated protein. At that time it was working fine. But I did some more simulation run and now I want to calculate SASA for the entire trajectory but unfortunately Its showing the following error. *Error* Problem in per-frame script: IOError: [Errno 13] Permission denied: 'sas111.txt' File "<string>", line 3, in <module> See reply log for Python traceback. For your reference, I am giving the script also. It was working fine previously but with the same procedure which I followed this script is not working and showing the above mentioned error. * Script * from chimera import openModels, Molecule out = open("sas111.txt", "a") x='---------------------------------------------------------------------------------' for m in openModels.list(modelTypes=[Molecule]): for r in m.residues: try: sas = r.areaSAS except AttributeError: continue print>>out, r, sas print>>out,x out.close() Kindly help me. Thank you. Aditya.

2 1

Chimera-users January 2011