August 2012 - Chimera-users - RBVI Mailing Lists

volume planes tool
by Jeff Triffo 22 Jun '16

22 Jun '16

hi folks, anyone know if the volume plane tool will support arbitrary orientation of the plane any time soon? -Jeff

5 7

Re: [Chimera-users] Display a spider volume data in a specific orientation
by Elaine Meng 08 May '14

08 May '14

Hi Zongli, This is not my area of expertise (our expert is currently out of town) -- at first I thought you could use "Transform Molecule Coordinates" (under Tools... Movement), but now I see that it works only on atomic structures rather than maps: <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/transform/transfor… > It only works on molecular structures because it actually changes the atomic coordinates, without changing the model transformation. I've figured out one workaround, but it is both crazy and slightly tedious: (1) open your map (say as model 0). (2) open any atomic-resolution structure, it doesn't matter what, and open it twice -- now you have three models. Don't move them separately from the map (yet). Let's say the atomic structures are models 1 and 2. (3) use "Transform Molecule Coordinates" with desired Euler angles and shift on one copy of the atomic structure (say model 1). (4) use the match command to superimpose the other copy of the atomic structure on the one that was transformed: match #2 #1 (the command can use the whole models since they should have exactly the same atoms) (5) use the matrixcopy command to apply the transformation matrix of the second copy of the atomic structure to the map: matrixcopy 2 0 You might think "why do I need two copies of the atomic structure? can't I just transform one copy and then use matrixcopy?" ... in fact that's what I tried first, but after it didn't work, I realized it was because the Transform tool works by changing the coordinate values and not the stored matrix of the model. It is necessary to match the second copy to generate a corresponding matrix, and then matrixcopy can be used. I'm CC-ing the chimera-users(a)cgl.ucsf.edu list in case other Chimera users have suggestions. Our expert Tom G should be back next week and he might also have ideas. In general, it's better to send Chimera questions to that mailing list instead of just me, because I could be away from work or (like now) lacking a good answer! I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Apr 7, 2010, at 11:51 AM, Li, Zongli wrote: > Hi Elaine, > I have a spider volume data (or mrc density map) from which I got a > serious 2D projections. I have the Euler angles for each projection. > Is there a way in Chimera that I can use those Euler angles to > display the 3D spider volume data (or mrc density map) in a specific > orientation that corresponding to that 2D projection? > Thank you very much in advance. > Best, > Zongli > > **************************************** > Zongli Li, Ph.D. > > Howard Hughes Medical Institute > Department of Cell Biology > Harvard Medical School > C Building, Room 420B > 240 Longwood Avenue > Boston, MA 02115 > > Tel: 617-432-4095 (Office) > 617-432-4708 (EM Suite) > 617-432-4091 (Computer room) > Fax: 617-432-1144 > Email: zongli_li(a)hms.harvard.edu > *************************************** >

3 5

font size in pull-down menus
by Boaz Shaanan 09 Oct '13

09 Oct '13

Hi, Is there a way to change the font size of the pull-down menus? For some reason on the Windows (XP) v.1.5.1 they seem smaller to me. Nothing in terms of graphics (or my eyesight) has changed since I upgraded to 1.5.1 recently. Thanks, Boaz Thanks, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 ; Fax: 646-1710 Skype: boaz.shaanan‎

2 1

Fwd: Installation problems
by prashant kurkute 04 Sep '12

04 Sep '12

Respected sir, Sorry for making you disturb. I am novice to linux. I am trying to install chimera in ubuntu 12.04 LTS. I follow following instruction. sudo chmod +x chimera-1.6.2-linux_x86_64.bin ./chimera-1.6.2-linux_x86_64.bin (I also triied with root sudo ./chimera-1.6.2-linux_x86_64.bin) I got following reply bash: ./chimera-1.6.2-linux_x86_64.bin: cannot execute binary file Sir please help me to solve problem. I will be greatly thankful to your help. With Best wishes and regards.

2 1

volume of an ensemble
by R. Andrew Byrd 31 Aug '12

31 Aug '12

Dear Chimera Team, Is it possible to get the total volume that encompasses an ensemble of structures? For example, if a docking or structure calculation produces an ensemble of structures, can one calculate the volume that encompasses all the members of the ensemble? A docking calculation may have one component superimposable and the second component represent an ensemble, and it is that ensemble that I would I like a measure of the total volume. Thanks! Andy

2 2

adjust resolution of alignment .eps in Multalign viewer
by Gesa Volkers 31 Aug '12

31 Aug '12

Hi all, I would like to extract a high resolution publication quality image from my alignment from the Multalign viewer. Only option I see is to save it a as .eps, but when I open that file the resolution is not sufficient. Is it possible to get a higher resolution image? Thanks, Gesa

2 2

reasonable minimization times
by David Belnap 30 Aug '12

30 Aug '12

I am trying to link the crystal structure of an Fc domain with two Fab structures. I am using the command "minimize spec sel fragment true" on the command line. When various options come up, I've selected "if alternate locations, keep only highest occupancy", "add hydrogens", "add charges", "consider each model in isolation from all others", "also consider H-bonds", and AMBER ff12SB and ANTECHAMBER to assign charges. I've had jobs run overnight that didn't finish. What is a reasonable time for about 8-10 residues to be minimized? Can you suggest any ways to speed this up? Thanks, David

3 4

problem with loading color scheme in Multalign viewer
by Gesa Volkers 29 Aug '12

29 Aug '12

Hi all, I encountered a problem when I tried to open a color scheme (tried it with custom.par from the Chimera website) in the Multalign viewer. I get the following error: "File "C:\Program Files\Chimera 1.6.2\share\MultAlignViewer\PrefDialog.py", line 69, in addColorScheme self._resColorOpt.set(colorFile) See reply log for Python traceback." I reported a bug. Though has anyone found a way to solve this problem and is able to open a .par file again? Thanks, Gesa

2 2

making a movie problem
by Boskovic.Jasminka 29 Aug '12

29 Aug '12

Hi, I am trying to make a movie with chimera but instead of filming just a molecule's movement the program is making the frames of all the chimera window showing the "File, Select, Actions etc" bottoms and the command line? How can I remove this option and film just the molecule window? Thank you in advance! Best regards, Jasminka Boskovic, PhD Centro Nacional de Investigaciones Oncologicas-CNIO (Spanish National Cancer Research Centre-CNIO) Melchor Fernandez Almagro 3 28029 Madrid Spain Tel.: + (34) 917 328 000 (ext 3031) Fax: + (34) 912 246 980 e-mail: jboskovic(a)cnio.es **NOTA DE CONFIDENCIALIDAD** Este correo electr�nico, y en su caso los ficheros adjuntos, pueden contener informaci�n protegida para el uso exclusivo de su destinatario. Se proh�be la distribuci�n, reproducci�n o cualquier otro tipo de transmisi�n por parte de otra persona que no sea el destinatario. Si usted recibe por error este correo, se ruega comunicarlo al remitente y borrar el mensaje recibido. **CONFIDENTIALITY NOTICE** This email communication and any attachments may contain confidential and privileged information for the sole use of the designated recipient named above. Distribution, reproduction or any other use of this transmission by any party other than the intended recipient is prohibited. If you are not the intended recipient please contact the sender and delete all copies.

2 1

Trivial question
by George Tzotzos 28 Aug '12

28 Aug '12

It seems that a standard feature of Chimera is upon loading a pdb file of a complex, a number of nearby residues also show up. My question is whether there's a rule, let's say a cutoff distance, or other. Thanks in advance for any advice on this Regards George

2 1

Chimera-users August 2012