January 2011 - Chimera-users - RBVI Mailing Lists

volume planes tool
by Jeff Triffo 22 Jun '16

22 Jun '16

hi folks, anyone know if the volume plane tool will support arbitrary orientation of the plane any time soon? -Jeff

5 7

Re: [Chimera-users] Display a spider volume data in a specific orientation
by Elaine Meng 08 May '14

08 May '14

Hi Zongli, This is not my area of expertise (our expert is currently out of town) -- at first I thought you could use "Transform Molecule Coordinates" (under Tools... Movement), but now I see that it works only on atomic structures rather than maps: <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/transform/transfor… > It only works on molecular structures because it actually changes the atomic coordinates, without changing the model transformation. I've figured out one workaround, but it is both crazy and slightly tedious: (1) open your map (say as model 0). (2) open any atomic-resolution structure, it doesn't matter what, and open it twice -- now you have three models. Don't move them separately from the map (yet). Let's say the atomic structures are models 1 and 2. (3) use "Transform Molecule Coordinates" with desired Euler angles and shift on one copy of the atomic structure (say model 1). (4) use the match command to superimpose the other copy of the atomic structure on the one that was transformed: match #2 #1 (the command can use the whole models since they should have exactly the same atoms) (5) use the matrixcopy command to apply the transformation matrix of the second copy of the atomic structure to the map: matrixcopy 2 0 You might think "why do I need two copies of the atomic structure? can't I just transform one copy and then use matrixcopy?" ... in fact that's what I tried first, but after it didn't work, I realized it was because the Transform tool works by changing the coordinate values and not the stored matrix of the model. It is necessary to match the second copy to generate a corresponding matrix, and then matrixcopy can be used. I'm CC-ing the chimera-users(a)cgl.ucsf.edu list in case other Chimera users have suggestions. Our expert Tom G should be back next week and he might also have ideas. In general, it's better to send Chimera questions to that mailing list instead of just me, because I could be away from work or (like now) lacking a good answer! I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Apr 7, 2010, at 11:51 AM, Li, Zongli wrote: > Hi Elaine, > I have a spider volume data (or mrc density map) from which I got a > serious 2D projections. I have the Euler angles for each projection. > Is there a way in Chimera that I can use those Euler angles to > display the 3D spider volume data (or mrc density map) in a specific > orientation that corresponding to that 2D projection? > Thank you very much in advance. > Best, > Zongli > > **************************************** > Zongli Li, Ph.D. > > Howard Hughes Medical Institute > Department of Cell Biology > Harvard Medical School > C Building, Room 420B > 240 Longwood Avenue > Boston, MA 02115 > > Tel: 617-432-4095 (Office) > 617-432-4708 (EM Suite) > 617-432-4091 (Computer room) > Fax: 617-432-1144 > Email: zongli_li(a)hms.harvard.edu > *************************************** >

3 5

font size in pull-down menus
by Boaz Shaanan 09 Oct '13

09 Oct '13

Hi, Is there a way to change the font size of the pull-down menus? For some reason on the Windows (XP) v.1.5.1 they seem smaller to me. Nothing in terms of graphics (or my eyesight) has changed since I upgraded to 1.5.1 recently. Thanks, Boaz Thanks, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 ; Fax: 646-1710 Skype: boaz.shaanan‎

2 1

color surface based on NMR Order parameters
by lalit.deshmukh＠huskymail.uconn.edu 08 Sep '11

08 Sep '11

Hello, I like the 'surface color ' feature in Chimera. I think, right now, the surface can be colored by radius, height, volume data and so on.. Is it also possible to color the surface based upon the NMR order parameters or intensity ratios (it will be an Excel file containing just two columns: residue numbers and the respective parameter values)? Or this can be done in some other way? Thanks in advance, Regards, Lalit Deshmukh, University of Connecticut Storrs, CT 06269

5 8

square of density volume
by 仁田亮 12 May '11

12 May '11

Hi chimera users, I want to calculate the square value for the volume of the electron density because I want to calculate the variance map. Do anyone know whether we can calculate the square value of the volume by chimera? And if we can, could you teach me how to calculate? Thanks for your time and help, Ryo

5 12

color bond distance, angle and so on
by Jean-Didier Maréchal 08 Mar '11

08 Mar '11

Hi guys, How can I change the color of the labels associated to distance between atoms, angles etc (both the for the text and the dashes). Thanks a lot JD **************************** Dr. Jean-Didier Maréchal Lecturer The Computational Biotechnological Chemistry Team Unitat de Química Física Departament de Química Universitat Autònoma de Barcelona Edifici C.n. 08193 Cerdanyola (Barcelona) Tel: +34.935814936 e-mail: JeanDidier.Marechal(a)uab.es www: http://asklipio.qf.uab.es

5 8

surface hydrophobicity display
by Elaine Meng 03 Feb '11

03 Feb '11

Hi Sumitro, I did a little more digging for related information and thought I would share -- however, none of these methods are available in Chimera currently. Miguel Ortiz Lombardia has pointed out that the GRID program calculates a hydrophobic potential, and sent us the following links: <http://biop.ox.ac.uk/www/lj2000/noble/noble_02.html> <http://www.moldiscovery.com/docs/vsplus/grid.html> -- the following web server sounded promising, but apparently no longer exists: PLATINUM: a web tool for analysis of hydrophobic/hydrophilic organization of biomolecular complexes. Pyrkov TV, Chugunov AO, Krylov NA, Nolde DE, Efremov RG. Bioinformatics. 2009 May 1;25(9):1201-2. <http://www.ncbi.nlm.nih.gov/pubmed/19244385> -- the following paper discusses what surface properties of the receptor correlate well with the types of nearby ligand atoms. If I understood it correctly, they looked at how successfully Coulombic electrostatic potential and the gradient in that potential can be used to identify hydrophobic areas of surface (areas that bind hydrophobic atoms in the ligand). Both were somewhat successful, but even better was a simple definition of hydrophobic surface as the part of the surface that is not close to hydrogen-bonding groups. This paper is fairly old and the data set of ligand/receptor structures small. Definition and display of steric, hydrophobic, and hydrogen-bonding properties of ligand binding sites in proteins using Lee and Richards accessible surface: validation of a high-resolution graphical tool for drug design. Bohacek RS, McMartin C. J Med Chem. 1992 May 15;35(10):1671-84. <http://www.ncbi.nlm.nih.gov/pubmed/1588550> -- then there are some other complicated functions based on molecular fragments and distances among them and to the molecular surface: A new approach to analysis and display of local lipophilicity/hydrophilicity mapped on molecular surfaces. Heiden W, Moeckel G, Brickmann J. J Comput Aided Mol Des. 1993 Oct;7(5):503-14. Estimating and representing hydrophobicity potential Fauchere et al. Journal of Molecular Graphics Volume 6, Issue 4, December 1988, Pages 203-206 If I understood correctly, these have many parameters and the functional form is not simple. It would not be straightforward to put them into Chimera. Finally, I also saw that the program MDL Chime has something called hydrophobic potential display, but I couldn't find a description of how it really works -- it might just be coloring whole amino acids by hydrophobicity value like Chimera does now, or atoms based on element. Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

5 9

exporting the 2drms values
by Bala subramanian 31 Jan '11

31 Jan '11

Friends, I used Ensemble match command to calculate the 2rmsd of multiple pdb files concatenated in a single pdb file. I would like to know if there is any way to save the values (as a matrix). Precisely how to output the ensemble match values. Thanks, Bala

2 3

Surface electrostatic and hydrophobicity.
by Sumitro Harjanto 28 Jan '11

28 Jan '11

Hi elaine, I've a few questions to ask about colouring surface by electrostatic potential and hydrophobicity: 1. I understand that I can use render by attribute to show surface hydrophobicity. But because it's a residue attribute, any surface of the same residue will be getting the same colour. Is there a way to calculate the surface hydrophobicity based on atoms in the vicinity instead of simply using the residue hydrophobicity values? 2. Because I have problem installing delphi, I have resorted to using the coulomb surface colouring tool. How different is this from the procedure of adding hydrogen, adding charge, then render by attribute ? Will I expect to see the same result ? Thanks elaine! Cheers, Sumitro Institute for Infocomm Research disclaimer: "This email is confidential and may be privileged. If you are not the intended recipient, please delete it and notify us immediately. Please do not copy or use it for any purpose, or disclose its contents to any other person. Thank you."

2 2

Error in SASA calculation
by Aditya Padhi 28 Jan '11

28 Jan '11

Hi Elaine, Hope you are fine. If you remember I was calculating per residue SASA using Chimera for my MD simulated protein. At that time it was working fine. But I did some more simulation run and now I want to calculate SASA for the entire trajectory but unfortunately Its showing the following error. *Error* Problem in per-frame script: IOError: [Errno 13] Permission denied: 'sas111.txt' File "<string>", line 3, in <module> See reply log for Python traceback. For your reference, I am giving the script also. It was working fine previously but with the same procedure which I followed this script is not working and showing the above mentioned error. * Script * from chimera import openModels, Molecule out = open("sas111.txt", "a") x='---------------------------------------------------------------------------------' for m in openModels.list(modelTypes=[Molecule]): for r in m.residues: try: sas = r.areaSAS except AttributeError: continue print>>out, r, sas print>>out,x out.close() Kindly help me. Thank you. Aditya.

2 1

Chirality inversion ?
by R. Charbel Maroun 28 Jan '11

28 Jan '11

Hi everybody, Is there an easy and quick way to invert the chirality of an atom, say a Ca ? Greetings, ----------------------------------------- R. Charbel MAROUN, Ph.D., H.D.R. Neurobiologie et Pharmacologie Moléculaire Centre de Psychiatrie et de Neurosciences (INSERM U894/U. Paris Descartes) 2ter rue d'Alésia 75014 Paris FRANCE Tél. +33 1 40 78 92 77 Fax +33 1 45 80 72 93 e-mail charbel.maroun(a)inserm.fr ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 1

error message upon registration
by Boaz Shaanan 26 Jan '11

26 Jan '11

2 1

1.5.2 release [fix for registration problem]
by Eric Pettersen 26 Jan '11

26 Jan '11

Hi everyone, As of a few days ago, the registration-verification certificate that has shipped with every version of Chimera for the last ten years expired. Consequently, any Chimera use after that would bring up the registration-request dialog regardless of how recently that version of Chimera had been registered. On top of that, the expired certificate caused new registrations to fail, so all you good people who were trying to help us out by registering your versions after this bug appeared were stymied. We have just released Chimera 1.5.2, which has a permanent fix for this problem. You can download it from: http://www.cgl.ucsf.edu/chimera For users who prefer not to upgrade immediately, we expect to have a solution for existing older versions in a week or less. We will send another email with details when that solution becomes available. --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

electrostatic potential in active site at an interface
by Boaz Shaanan 26 Jan '11

26 Jan '11

Hi I need your advice on the following: I have an active site which is located at the interface between two subunits. The cofactor in the active site makes interactions with residues from the two subunits. I have a few mutants and would like to display their effect on the electrostatic potential around the cofactor in order to explain changes in the activity of the enzyme. I have a electrostatic potential calculated both in apbs (.px) and delphi (.phi) on the basis of whole dimer structure. My first question is whether those potential maps are relevant for displaying in chimera the potential in an inner part of the protein or should I calculate the potential over the interface region that I'd like to be displayed. If the latter is correct my second question how do I get a surface (molecular or accessible) depiction of this region. I tried several options in chimera (following some examples in the gallery) but none seems to be doing it right. I probably miss something. I would be grateful for any clues on how to go about this. Thanks for your help, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 ; Fax: 646-1710 Skype: boaz.shaanan‎

2 1

rotation centers
by Benoit Zuber 26 Jan '11

26 Jan '11

Hi, I have a set of density maps and PDB models. I have displayed the maps side by side. Each map has a pdb model docked in it. I would like to make a movie where each map rotates around its Z axis. Each pdb should rotate around the Z axis of its respective map. I tried: set independent roll z The problem is that the center of the pdb models is not the same as the center of their respective maps. Is there a way to group one pdb with one map so that they rotate around the same center? Or is it possible to set the center of rotation of a PDB to the same value as the center of rotation of the map? Thanks in advance Ben -- Benoît Zuber MRC Laboratory of Molecular Biology Hills Road Cambridge CB2 0QH United Kingdom +44 1223 402209 bzuber(a)mrc-lmb.cam.ac.uk

2 2

registration
by Francesco Pietra 25 Jan '11

25 Jan '11

I have replaced previous installation of CHIMERA with chimera alpha version 1.6 (build 32272) 2011-01-06 08:36:33 GMT. I have attempted to register at the request but the answer is that no regular installation is seen. So, at any start I have to kill the request. francesco pietra

2 1

Chimera Question
by graemeg＠rci.rutgers.edu 24 Jan '11

24 Jan '11

Hello Chimera Feedback Team, For clarity and conciseness, I will jump immediately to my issue. I wish to import a CIF file of an inorganic crystal structure into the Chimera Program so that I can selectively eliminate certain atoms, and potentially create a video similar to one of the examples given on the website with a rotation and zoom into the meat of the structure. The file I import (.CIF) should have the proper symmetry group listed in addition to the lattice parameters of a unit cell, but when I try to generate a unit cell, the space group, cell size, and cell angles sections are blank, and therefore no copies can be made. Also, the viewing options give a choice between part ball and stick, part full atom, and essentially nothing else even with selecting the different presets. I know I am not working with PDB files but if there is anything in there that you could help me with, I would greatly appreciate it. Sincere Thanks, Graeme Gardner Graduate Assistant Rutgers University Department of Chemistry and Chemical Biology

3 2

selection (from distance) among PDB files after docking
by Damien Larivière 24 Jan '11

24 Jan '11

Dear all, I have numerous PDB files resulting from a docking run. From crosslinking experiments, we know here that one way to select among all the solutions is to identify the PDB files for which the distance between some residues of interest is lower than a specific value: distance between Res 246 in chain B and Res 131 chain C < 17 A distance between Res 162 in chain B and Res 135 chain C < 24 A The two constraints must be respected. So, is it possible to write a script which: - opens one by one the pdb files, -calculates the two distances for the current pdb file, - send in the reply log the name-number of this PDB file if it respects the two constraints? Then, I would just have a look to the reply log in order to know the pdb files to study in depth. Many thanks for your help Damien

3 4

Re: [Chimera-users] font size in pull-down menus
by Greg Couch 24 Jan '11

24 Jan '11

The font size of the menus matches that of other applications on Windows. To change the size, bring up the Display Properties dialog (right-click on background, or via the Control Panel), switch to the Appearance tab, and change the font size, then Apply to see the change. If you only want to change the menu font size and leave the fonts alone (e.g., the window names and the names of icons), you can click on the Advanced button, select the Menu item, and change the font size. -- Greg On 01/24/2011 05:56 AM, Boaz Shaanan wrote: > Hi, > > Is there a way to change the font size of the pull-down menus? For > some reason on the Windows (XP) v.1.5.1 they seem smaller to me. > Nothing in terms of graphics (or my eyesight) has changed since I > upgraded to 1.5.1 recently. > > Thanks, > > Boaz > > Thanks, > > Boaz > > > Boaz Shaanan, Ph.D. > Dept. of Life Sciences > Ben-Gurion University of the Negev > Beer-Sheva 84105 > Israel > Phone: 972-8-647-2220 ; Fax: 646-1710 > Skype: boaz.shaanan >

1 0

rotate command
by Alexandra Deaconescu 24 Jan '11

24 Jan '11

Hi everyone: I am sure this can be done in Chimera, but I just could not find the proper command - I want to simply rotate a pdb file by let's say 90 degrees. Now, if I want to also rotate a map (so both map and pdb at the same time), what would I use? Can anyone help? Many thanks!!! Bests, Alex Alexandra Deaconescu, Ph.D. ----------------------------------- Research Associate, HHMI c/o Grigorieff Laboratory Brandeis University http://people.brandeis.edu/~deacona For mail: Brandeis University 415 South St., MS 029 Rosenstiel Center Waltham, MA 02454 For packages (FEDEX): Brandeis University 415 South St., Kalman Receiving Dock Waltham, MA 02454

2 1

how to delete saved state in the "savepos list"
by jinghua 21 Jan '11

21 Jan '11

The savepos is a very useful command to save the state of the graphics. But after a while, the "savepos list" contains a long list. Is there a way to delete some of the states in the list? Thank you in advance, Jinghua

2 4

Display only selection
by Damien Larivière 20 Jan '11

20 Jan '11

Dear Chimera team, I'm identifying a complex between two proteins thanks to crosslink data. I have the following questions: 1/ I would like to select two residues that belong to two different chains and highlight them in the viewport. By using the sequence tool and then ctrl/shift+drag, I can select two residues (ex: 45 and 246 of chain A), they are highlighted in the view. But when I operate this way with res 45 of chain A and res 246 of chain B, only one remains highlighted in the view port. One way to sort this out would have been to rename all the chains with the letter A. But once the residues are highlighted, I have to measure the distance between them, then to make one chain active and then to move it and try to fit crosslink data (I hope I'm clear:-\ ). Is it possible to directly select and highlight in the viewport residues of interest belonging to different chains? 2/ Supposing that I can select and highlight in the viewport residues of interest belonging to different chains: How can I display only them in the viewport (and hide all the others)? The technical goal behind these questions is to better appreciate visually the distance between residues of interest and, thanks to the distance tool, to move one protein with respect to the other and fit crosslink data. Many thanks for your help. Damien

2 1

Chimera 1.5.1 on CentOS 5.5
by Yohei Norimatsu 18 Jan '11

18 Jan '11

Hi all, I just installed the latest version of Chimera (1.5.1 x86_64) on CentOS 5.5. I'm having a problem with MSMS surface representation. It doesn't show the surface for all the atoms and it just looks messed up. I installed the same version of Chimera on RedHat Linux 5 and it works without any problem. I don't know what the problem is. Does anyone use Chimera on CentOS? Any comment is appreciated. Thank you! Yohei

2 1

TZD Tautomer Distributions
by Nancy 17 Jan '11

17 Jan '11

Hi All, For pioglitazone, are the two tautomers depicted in the attached figure the major forms at pH 7.0? Also, are there any published articles, or other evidence that would confirm that this is indeed the correct tautomeric distribution at pH 7? Thank you, Nancy

2 1

Fwd: distance between 2 residues
by Damien Larivière 17 Jan '11

17 Jan '11

Hi everyone, As explain in the Chimera user guide, I used the command such like distance #0.2:246@N#0.5:131@N to measure the distance between two atoms of interest. To be more explicit regarding my first email, it was necessary to re-edit the pdb file and to assign a model number to each chain. In the example above, the chain B is named model 2 (then model 0.2 in Chimera) and the chain D is named model 5 (then model 0.5 in Chimera). It works fine but I suppose that there is a simpler and more direct way to specify the chain in the command? Many thanks Damien -------- Message original -------- Sujet: distance between 2 residues Date : Mon, 17 Jan 2011 18:09:11 +0100 De : Damien Larivière <damien.lariviere(a)fourmentinguilbert.org> Pour : chimera-users(a)cgl.ucsf.edu Dear all, I would like to know the (mean or approximative) distance between two residues within a protein (let's say Res 5 of chain A and Res 246 of chain C). I suppose that I have to select one atom in each of the residues and use the Distance tool. I confess I have trouble to do so, either by picking in the viewport or by using the atom identifier. May you tell me a simple way to achieve such a distance? Many thanks for your help Damien

2 1

distance between 2 residues
by Damien Larivière 17 Jan '11

17 Jan '11

Dear all, I would like to know the (mean or approximative) distance between two residues within a protein (let's say Res 5 of chain A and Res 246 of chain C). I suppose that I have to select one atom in each of the residues and use the Distance tool. I confess I have trouble to do so, either by picking in the viewport or by using the atom identifier. May you tell me a simple way to achieve such a distance? Many thanks for your help Damien

1 0

Cavities
by Beale, John 12 Jan '11

12 Jan '11

Is it possible to find cavities in a protein structure using Chimera? Thanks in advance! John John M. Beale, Jr., Ph.D. Professor of Medicinal Chemistry and Pharmacognosy Saint Louis College of Pharmacy 4588 Parkview Place Saint Louis, Missouri 63110 314-446-8461 Cell: 314-315-0409 FAX: 314-446-8460 jbeale(a)stlcop.edu<mailto:jbeale@stlcop.edu>

2 1

Tautomer Prediction
by Nancy 11 Jan '11

11 Jan '11

Hi All, Using MarvinSketch v5.3.3 (ChemAxon software), the predicted pKa value of the acidic hydrogen on the thiazolidinedione ring of pioglitazone is 4.57 (see attached "Figure_1.gif"). Therefore, the predominant species at pH 7.0 predicted by MarvinSketch is the one depicted in "Figure_2.gif". The different tautomeric forms predicted by MarvinSketch are shown in "Figure_3.gif". Can anyone explain where these predictions come from, and if they are correct? Also, are there other programs that can accurately predict tautomeric forms? Thanks, Nancy

2 1

Pioglitazone Tautomers
by Nancy 10 Jan '11

10 Jan '11

Hi All, I am performing molecular docking and molecular dynamics simulations of the thiazolidinedione pioglitazone binding to the PPAR-gamma receptor protein (PDB ID: 1ZGY). The thiazolidinedione ring can exist in numerous different tautomeric states; I have attached a figure depicting several of them. Which tautomer would be dominant at the physiological pH of ~7.0? Also, are there any software programs that can predict which tautomer would be correct? Thanks in advance, Nancy

2 1

Morphing surface
by Sumitro Harjanto 05 Jan '11

05 Jan '11

Hi elaine, Thanks for the prompt responses on earlier queries. I have one more question: Is it possible to morph between 2 surfaces? Basically, I would like to show the effect in the surface contour due to a residue change. Thanks, Sumitro Institute for Infocomm Research disclaimer: "This email is confidential and may be privileged. If you are not the intended recipient, please delete it and notify us immediately. Please do not copy or use it for any purpose, or disclose its contents to any other person. Thank you."

2 2

Amber trajectory rmsd
by George Tzotzos 05 Jan '11

05 Jan '11

I'd be grateful if you informed if there's a way one can plot protein backbone rmsd fluctuations of trajectories. I checked file:///Applications/Chimera.app/Contents/Resources/share/chimera/helpdir/ContributedSoftware/movie/movie.html#rmsd I may have missed the salient points. Many thanks in advance George

2 1

Togl patches?
by Clifford Yapp 05 Jan '11

05 Jan '11

Hi! I recently learned that Chimera has produced some patches to the Togl widget that allow it to work with Cocoa based Tk: http://plato.cgl.ucsf.edu/trac/chimera/browser/trunk/foreign/Togl Are these updates available under Togl's current license or are they restricted by the Chimera license? Thanks, CY

3 2

Enabling multithreading in chimera
by Akshaykumar Ganguly 05 Jan '11

05 Jan '11

Dear Sir / Madam, I use chimera 1.5 regularly for protein studies on a Quad core machine with Nvidia graphics running Ubuntu. However, the application does not support multi-threading and hence, runs quite slow. Is it possible to enable multi-threading in the existing release or will such a version of chimera be released in the near future? Regards, Akshay Kumar Ganguly Research Fellow, Structural and Computational Biology Group, International Centre for Genetic Engineering and Biotechnology, New Delhi, India

2 1

retrieving assigned color and ribbon thickness
by Sumitro Harjanto 05 Jan '11

05 Jan '11

Hi Elaine, I'm wondering if it is possible to retrieve the numerical (RGB) values of the color & ribbon width that I have previously assigned to certain residue(s). I often try out a certain color and save it in a session, but when I come back to the session and try to apply the color to the other residues I realized I forgot what's the RGB value I've assigned and have to resort to visual inspection (which is not very accurate). The same problem I have experienced with the ribbon thickness. Is there a way for me to keep a record of / retrieve these values? Thanks! Cheers, Sumitro Institute for Infocomm Research disclaimer: "This email is confidential and may be privileged. If you are not the intended recipient, please delete it and notify us immediately. Please do not copy or use it for any purpose, or disclose its contents to any other person. Thank you."

3 3

bond rotation
by Elaine Meng 05 Jan '11

05 Jan '11

On Jun 25, 2010, at 10:20 AM, Watson, Lisa wrote: > Hi Elaine, > I have changed several nucleotide bases in the DNA structure I am working with so that I can model in cytosine methylation. Is there a way that I can rotate the changed bases so that they are aligned to base-pair properly? > Thanks for your help! > -Lisa Hi Lisa, Sure, you can interactively rotate bonds. If you Ctrl-doubleclick a bond it should show a little menu where one of the choices is to rotate that bond. After you activate the rotation, the "adjust torsions" dialog will appear, which includes various ways to rotate the bond. You can have several rotatable bonds at the same time. Here is more about Adjust Torsions: <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/structuremeas/stru…> Also, the tutorial "Structure Comparison and Analysis" includes measuring distances, finding H-bonds and clashes, and rotating bonds: <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/squalene.html> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

4 6

Silhouette edges around dashed wire-style bonds
by Dipl.-Ing. Thomas Mitterfellner 05 Jan '11

05 Jan '11

Hello! In some of my structures, I need dashed bonds to indicate hydrogen bonding or metal complexation. As I understand it, in order for bonds to be displayed as dashed, they need to be wire-style. I wondered if silhouette edges could also be extended to these wire-style bonds? Alternatively, could stick-style bonds possibly be displayed in a dashed fashion? Maybe as a series of cylinders, each separated by a certain distance, or eg. as a series of equally spaced small spheres. Thank you, Thomas

4 3

Adjusting the quality of surface while preserving other settings
by Sumitro Harjanto 04 Jan '11

04 Jan '11

Hi Elaine, Is there a way to adjust the quality of the surface. I often use the preset publication setting to make the surface smoother before rendering images. But after activating publication quality, the speed will slow down, and I will experience lag (especially with large models) when I try to move/turn the models around. I wondering if I can toggle between 'interactive' and 'publication' quality for the surface only without affecting the background /ribbon settings..? thanks! Cheers, Sumitro Institute for Infocomm Research disclaimer: "This email is confidential and may be privileged. If you are not the intended recipient, please delete it and notify us immediately. Please do not copy or use it for any purpose, or disclose its contents to any other person. Thank you."

2 1

index out of range
by Francesco Pietra 03 Jan '11

03 Jan '11

Hello: Two not new questions. (1) I am trying to read prmtop/mdcrd files from Amber MD with chimera alpha version 1.5 (build 30702) 2010-06-10 23:51:24 GMT, getting "index out of range" (the files are correct, they open with VMD) MDTools 1.2 Exp (2005-08-20) by James Phillips. Trajectory.DCD.MDToolsMarch97.md.help() for more info. - HomoCoord 1.3 Exp (2005-08-20) - Constants 1.1 Exp (2004-05-17) - AtomGroup 1.4 Exp (2007-02-07) - local 1.1 Exp (2004-05-17) Unknown OSTYPE ??? set. Viewing and plotting are disabled. - Trans 1.2 Exp (2005-08-20) - DCD 1.10 Exp (2007-02-07) - Data 1.2 Exp (2005-08-20) Traceback (most recent call last): File "/usr/local/chimera/lib/python2.6/site-packages/Pmw/Pmw_1_3/lib/PmwBase.py", line 1747, in __call__ return apply(self.func, args) File "/usr/local/chimera/share/chimera/baseDialog.py", line 342, in command getattr(s, buttonFuncName(txt))() File "/usr/local/chimera/share/chimera/baseDialog.py", line 560, in OK self.Apply() File "/usr/local/chimera/share/Trajectory/EnsembleLoader.py", line 92, in Apply self.callback) File "/usr/local/chimera/share/Trajectory/DCD/__init__.py", line 72, in loadEnsemble addTrajKw=self.addTrajKw) File "/usr/local/chimera/share/Trajectory/DCD/__init__.py", line 85, in loadEnsemble ensemble = DCD(psf, dcd, startFrame, endFrame) File "/usr/local/chimera/share/Trajectory/DCD/DCD.py", line 24, in __init__ mdtMol = md.Molecule(psf=psfPath) File "/usr/local/chimera/share/Trajectory/DCD/MDToolsMarch97/md_AtomGroup.py", line 356, in __init__ nrecs = int(psfrec[0]) IndexError: list index out of range IndexError: list index out of range File "/usr/local/chimera/share/Trajectory/DCD/MDToolsMarch97/md_AtomGroup.py", line 356, in __init__ nrecs = int(psfrec[0]) See reply log for Python traceback. ************************************************ (2) Although I suppose I used in the past ATOM ATTRIBUTES to display chloride anion at its standard radius in preparing figures for publication, I just get it now as a tiny dot as set by MODELLER. That with proteins without or with non-polar hydrogens. For example TER 6750 LYS A 426 ATOM 6751 Cl- Cl- A 427 -31.021 4.748 41.205 1.00 6.32 Cl TER 6752 Cl- A 427 ATOM 6753 N LEU B 1 -13.959 20.979 -35.226 1.00 63.95 N I can't remember how to specify the chloride radius in command sel :427@Cl- ************************************************ Thanks for pointing me to the correct procedure francesco pietra

2 2

query
by SURESH KUMAR 03 Jan '11

03 Jan '11

hello sir, I need to find electron density of protein, i am planning to use UCSF Chimera software for that... so please help me how to find protein electron density using UCSF Chimera thank you A.Suresh Kumar, M.Tech Biomedical Engineering, Amrita School of Engineering, Ettimadai, Coimbatore.

2 2

Re: [Chimera-users] center of rotation
by Eric Pettersen 03 Jan '11

03 Jan '11

On Dec 30, 2010, at 11:02 AM, Bill Montfort wrote: > Thanks! This works well. If there were a quicker means for > activating Set Pivot, this would be even better (e.g. keyboard or > mouse combination). Cheers! Okay, for added convenience I've put a "Set Pivot" item in the atom context menu, which you can access by control-double-clicking an atom. This is only available in the 1.6 daily build and only as of tonight's upcoming build (so 1.6 builds dated Jan 3 or later). --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

Mirror image proteins
by Stephen B.H. Kent 03 Jan '11

03 Jan '11

How can I invert the configuration of a pdb file to create the mirror image model of the protein molecule? Thanks, Steve Kent Stephen Kent Professor of Chemistry Professor of Biochemistry & Molecular Biology Institute for Biophysical Dynamics Mail: Gordon Center for Integrative Science, Room W204 University of Chicago 929 East 57th Street Chicago, IL 60637, USA Tel: +1 773 702 4912 Email: skent(a)uchicago.edu

3 3

Thiazolidinedione Tautomers
by Nancy 03 Jan '11

03 Jan '11

Hi All, I am performing molecular docking and molecular dynamics simulations of thiazolidinediones (TZDs) binding to the ligand binding domain of the PPAR-gamma receptor protein. The thiazolidinedione ring can exist in numerous different tautomeric states (see attached figure); is there any particular tautomer(s) that would be dominant, and thus most appropriate for docking and molecular dynamics simulations, at pH 7.4? I have read the article "Metformin and glitazones: does similarity in biomolecular mechanism originate from tautomerism in these drugs?" J. Phys. Org. Chem. 2008, 21 30–33, as a reference, but it does make it clear as to which tautomer is most appropriate for simulating binding to a receptor protein at pH 7.4. Thanks in advance, Nancy

2 1