May 2011 - Chimera-users - RBVI Mailing Lists

volume planes tool
by Jeff Triffo 22 Jun '16

22 Jun '16

hi folks, anyone know if the volume plane tool will support arbitrary orientation of the plane any time soon? -Jeff

5 7

Re: [Chimera-users] Display a spider volume data in a specific orientation
by Elaine Meng 08 May '14

08 May '14

Hi Zongli, This is not my area of expertise (our expert is currently out of town) -- at first I thought you could use "Transform Molecule Coordinates" (under Tools... Movement), but now I see that it works only on atomic structures rather than maps: <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/transform/transfor… > It only works on molecular structures because it actually changes the atomic coordinates, without changing the model transformation. I've figured out one workaround, but it is both crazy and slightly tedious: (1) open your map (say as model 0). (2) open any atomic-resolution structure, it doesn't matter what, and open it twice -- now you have three models. Don't move them separately from the map (yet). Let's say the atomic structures are models 1 and 2. (3) use "Transform Molecule Coordinates" with desired Euler angles and shift on one copy of the atomic structure (say model 1). (4) use the match command to superimpose the other copy of the atomic structure on the one that was transformed: match #2 #1 (the command can use the whole models since they should have exactly the same atoms) (5) use the matrixcopy command to apply the transformation matrix of the second copy of the atomic structure to the map: matrixcopy 2 0 You might think "why do I need two copies of the atomic structure? can't I just transform one copy and then use matrixcopy?" ... in fact that's what I tried first, but after it didn't work, I realized it was because the Transform tool works by changing the coordinate values and not the stored matrix of the model. It is necessary to match the second copy to generate a corresponding matrix, and then matrixcopy can be used. I'm CC-ing the chimera-users(a)cgl.ucsf.edu list in case other Chimera users have suggestions. Our expert Tom G should be back next week and he might also have ideas. In general, it's better to send Chimera questions to that mailing list instead of just me, because I could be away from work or (like now) lacking a good answer! I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Apr 7, 2010, at 11:51 AM, Li, Zongli wrote: > Hi Elaine, > I have a spider volume data (or mrc density map) from which I got a > serious 2D projections. I have the Euler angles for each projection. > Is there a way in Chimera that I can use those Euler angles to > display the 3D spider volume data (or mrc density map) in a specific > orientation that corresponding to that 2D projection? > Thank you very much in advance. > Best, > Zongli > > **************************************** > Zongli Li, Ph.D. > > Howard Hughes Medical Institute > Department of Cell Biology > Harvard Medical School > C Building, Room 420B > 240 Longwood Avenue > Boston, MA 02115 > > Tel: 617-432-4095 (Office) > 617-432-4708 (EM Suite) > 617-432-4091 (Computer room) > Fax: 617-432-1144 > Email: zongli_li(a)hms.harvard.edu > *************************************** >

3 5

font size in pull-down menus
by Boaz Shaanan 09 Oct '13

09 Oct '13

Hi, Is there a way to change the font size of the pull-down menus? For some reason on the Windows (XP) v.1.5.1 they seem smaller to me. Nothing in terms of graphics (or my eyesight) has changed since I upgraded to 1.5.1 recently. Thanks, Boaz Thanks, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 ; Fax: 646-1710 Skype: boaz.shaanan‎

2 1

color surface based on NMR Order parameters
by lalit.deshmukh＠huskymail.uconn.edu 08 Sep '11

08 Sep '11

Hello, I like the 'surface color ' feature in Chimera. I think, right now, the surface can be colored by radius, height, volume data and so on.. Is it also possible to color the surface based upon the NMR order parameters or intensity ratios (it will be an Excel file containing just two columns: residue numbers and the respective parameter values)? Or this can be done in some other way? Thanks in advance, Regards, Lalit Deshmukh, University of Connecticut Storrs, CT 06269

5 8

Asymmetric partial charges on symmetric atoms
by Brian Fochtman 31 May '11

31 May '11

Hi, When adding partial charges (AM1-BCC) to small molecules in chimera, we observed that atoms in symmetrical groups are not assigned the same partial charge. Specifically, the two oxygens in a carboxyl group are not assigned the same partial charge. See excerpt from mol2 file below: carboxyl: 20 C20 23.4850 19.6920 64.8870 C.2 1 BCZ 0.9226 21 O21 22.2660 19.7760 65.0340 O.co2 1 BCZ -0.9253 22 O22 24.2040 20.8120 64.7970 O.co2 1 BCZ -0.7643 There is a significant difference in partial charge between the two carboxyl oxygens (0.161). This problem was observed in both older (with mopac) and newer (with sqm) versions of chimera. The molecule is peramivir from the pdb1L7F crystal structure. Similar problems were observed for other molecules that inhibit Neuraminidase for example those 1L__ pdb structures. This problem is also observed when assigning am1bcc charges to the mol2 file using antechamber/sqm directly. Best Regards, Brian Fochtman, Trent Balius, Sudipto Mukherjee

2 1

Chimera with 50000 pdb files
by mselvaraj＠mbu.iisc.ernet.in 31 May '11

31 May '11

Dear all, I have some 50000 pdbs obtained from a md simulation of my protein. I would like to calculate ellipsoid (with 'measure inertia' command) around the protein molecule in each pdb and get their axes. Is there a provision/script in chimera to run multiple pdbs and get the axes in a file separately? Any suggestions on this will be helpful. Thanks in advance. yours truly, M. Selvaraj, Graduate student, Molecular Biophysics Unit, Indian Institute of Science, Bangalore 560 012. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

Molecular representation & FindHbond
by George Tzotzos 31 May '11

31 May '11

Hi everybody, I've successfully loaded my protein. It is represented in ribbon. I want to select three specific residues (e.g. HIS22, TYR53 and VAL124), show them in ball & stick and find Hbonds between them. I follow the procedure below: 1. select #0:22,53,124. Chimera returns: 55 atoms, 54 bonds 2. show sel 3. repr bs sel 4. FindHbond (see snapshot). Nothing is displayed. Instead, I see under the command window: 109 hydrogen bonds found. These are ALL the Hbonds found in the protein. I'd appreciate your guidance how to deal with this. Another related issue is the carboxy terminal residue. In this case VAL124. It is deprotonated. Is it possible to protonate it and then look for Hbons? Thanks in advance for your advice Regards George

2 2

Re: [Chimera-users] An ellipsoid around a protein
by Elaine Meng 30 May '11

30 May '11

Dear M, Chimera questions should be sent to chimera-users(a)cgl.ucsf.edu (CC'd here). In Chimera you can calculate and display the inertia ellispoid for any set of atoms with the command "measure inertia." For example, you could open the protein structure in Chimera, show the command line (from Favorites menu) and then enter the command: measure inertia protein The principal axis information is given in the Reply Log. There are other keywords, such as to control the color of the ellipsoid. See: <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/measure.html#inertia> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On May 29, 2011, at 9:45 PM, mselvaraj(a)mbu.iisc.ernet.in wrote: > Dear sir, > I would like to calcualte an ellipsoid with its principle axis for a > protein molecule,given its PDB. I came across your discussion on > chimera-users discussion.. Do you have a program that can calculate the > ellipsoid and its principle axes. It would be very help ful for my > analysis. Thanks in advance. > > yours sincerely, > M. Selvaraj, > Graduate student, > Molecular Biophysis Unit, > Indian Institute of Science, > Bangalore 560 012 >

1 0

system freeze completly with ubuntu 10.10
by Mario Dejung 27 May '11

27 May '11

Hello, I have some trouble with chimera on my old laptop. My complete system is freezing after a few seconds. I can not restart X server or switching to a console or anything, even the mouse pointer is not moving. I tried 32 bit chimera 1.5.2 and 1.5.3, both have the same problem. I have 64 MB graphical memory available, but the maps I am loading are very small, like less then 4MB and the system crashs also, even if I open just one map. Does anyone has a good suggestion? Since the whole system is freezing, I am not able to switch back to a terminal to look for error messages or similar. Kind regards Mario

2 1

Import IMOD models into Chimera
by Thomas Heuser 27 May '11

27 May '11

Hi all, Is it possible to open IMOD model files in Chimera? I have used IMOD (with imodmesh) to generate a model of my structure and would now like to load this IMOD model file (.mod) as a volume into Chimera. Is that doable? Thanks a lot in advance and big cheers, Tom -- XXXXXXXXXXXXXXXXXXXXXXX Thomas Heuser Nicastro Lab Rosenstiel Center, MS029 Brandeis University 415 South Street Waltham, MA 02454-9110 Phone: (+ 1) 781 736 2608

2 1