August 2011 - Chimera-users - RBVI Mailing Lists

volume planes tool
by Jeff Triffo 22 Jun '16

22 Jun '16

hi folks, anyone know if the volume plane tool will support arbitrary orientation of the plane any time soon? -Jeff

5 7

Re: [Chimera-users] Display a spider volume data in a specific orientation
by Elaine Meng 08 May '14

08 May '14

Hi Zongli, This is not my area of expertise (our expert is currently out of town) -- at first I thought you could use "Transform Molecule Coordinates" (under Tools... Movement), but now I see that it works only on atomic structures rather than maps: <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/transform/transfor… > It only works on molecular structures because it actually changes the atomic coordinates, without changing the model transformation. I've figured out one workaround, but it is both crazy and slightly tedious: (1) open your map (say as model 0). (2) open any atomic-resolution structure, it doesn't matter what, and open it twice -- now you have three models. Don't move them separately from the map (yet). Let's say the atomic structures are models 1 and 2. (3) use "Transform Molecule Coordinates" with desired Euler angles and shift on one copy of the atomic structure (say model 1). (4) use the match command to superimpose the other copy of the atomic structure on the one that was transformed: match #2 #1 (the command can use the whole models since they should have exactly the same atoms) (5) use the matrixcopy command to apply the transformation matrix of the second copy of the atomic structure to the map: matrixcopy 2 0 You might think "why do I need two copies of the atomic structure? can't I just transform one copy and then use matrixcopy?" ... in fact that's what I tried first, but after it didn't work, I realized it was because the Transform tool works by changing the coordinate values and not the stored matrix of the model. It is necessary to match the second copy to generate a corresponding matrix, and then matrixcopy can be used. I'm CC-ing the chimera-users(a)cgl.ucsf.edu list in case other Chimera users have suggestions. Our expert Tom G should be back next week and he might also have ideas. In general, it's better to send Chimera questions to that mailing list instead of just me, because I could be away from work or (like now) lacking a good answer! I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Apr 7, 2010, at 11:51 AM, Li, Zongli wrote: > Hi Elaine, > I have a spider volume data (or mrc density map) from which I got a > serious 2D projections. I have the Euler angles for each projection. > Is there a way in Chimera that I can use those Euler angles to > display the 3D spider volume data (or mrc density map) in a specific > orientation that corresponding to that 2D projection? > Thank you very much in advance. > Best, > Zongli > > **************************************** > Zongli Li, Ph.D. > > Howard Hughes Medical Institute > Department of Cell Biology > Harvard Medical School > C Building, Room 420B > 240 Longwood Avenue > Boston, MA 02115 > > Tel: 617-432-4095 (Office) > 617-432-4708 (EM Suite) > 617-432-4091 (Computer room) > Fax: 617-432-1144 > Email: zongli_li(a)hms.harvard.edu > *************************************** >

3 5

font size in pull-down menus
by Boaz Shaanan 09 Oct '13

09 Oct '13

Hi, Is there a way to change the font size of the pull-down menus? For some reason on the Windows (XP) v.1.5.1 they seem smaller to me. Nothing in terms of graphics (or my eyesight) has changed since I upgraded to 1.5.1 recently. Thanks, Boaz Thanks, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 ; Fax: 646-1710 Skype: boaz.shaanan‎

2 1

color surface based on NMR Order parameters
by lalit.deshmukh＠huskymail.uconn.edu 08 Sep '11

08 Sep '11

Hello, I like the 'surface color ' feature in Chimera. I think, right now, the surface can be colored by radius, height, volume data and so on.. Is it also possible to color the surface based upon the NMR order parameters or intensity ratios (it will be an Excel file containing just two columns: residue numbers and the respective parameter values)? Or this can be done in some other way? Thanks in advance, Regards, Lalit Deshmukh, University of Connecticut Storrs, CT 06269

5 8

fit molecule with Laplacian filtered map
by Noboru I 31 Aug '11

31 Aug '11

Hello, This is my first time trying to apply the Laplacian filter to a cryo-EM map in Chimera before I perform the global search to fit my crystal structure. However, the resulting map looks like the original map blown up into million pieces with positive and negative density showing. I get the same effect even after I "smooth" the map with the Gaussian filter first. Could someone advise me on how I could use this Laplacian filtered map information to better fit my molecule into the original EM map? Thanks for your help in advance. Noboru

2 1

chemdraw addins
by Bill Wuest 31 Aug '11

31 Aug '11

Hi, I am a big fan of your software and would like to use it in greater capacities (primarily for drug discovery). Is there a way to dock molecules (or better yet import chemdraw files) into chimera and then swap those structures in for ligands bound to crystal structures? I would like to model proposed compounds into a binding site of a protein and riboswitch both of which have the ligand bound in the crystal structure. Ideally I would like to import a chemdraw file which could be minimized by chimera and then be able to limit the docking to the ligand binding area and minimize again. That way I can see how the new analog changes the conformation of the protein. Any help would be greatly appreciated! If it would be easier to chat on the phone please feel free to call the number below. Have a great week! -Bill Wuest ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Dr. Bill Wuest Assistant Professor of Chemistry Temple University 130 Beury Hall, Office 448 1901 N. 13th St. Philadelphia, PA 19122 Phone: 215-204-7167 Email: wwuest(a)temple.edu

2 1

(no subject)
by Fakron, Osama Mohamed 29 Aug '11

29 Aug '11

Hello My name is Osama M.Fakron , I am PhD student in Mechanical &Material School at Washington State University , I am working on reconstruct 3D image from SEM 2D images by EM3D software ,I am using Chimera for viewing my reconstructed images , I need some help in getting 3D position for any point in my reconstructed image , and also your supporting is appreciated. All the best for you Osama

3 4

hardware stereo switching between distal and proximal when rotating
by frederick lee 29 Aug '11

29 Aug '11

dear chimera community, i have experienced this issue for some time now. i don't think this is happening with other software like pymol, dsvisualizer, MOE, etc given the same computer and hardware setup. somehow when viewing in hardware stereo mode (sequential stereo), the model will switch back and forth between proximal and distal views during rotations. is there a particular chimera setting that will prevent such from happening. thanks much. fred

3 2

Entra nella mia rete su LinkedIn
by Chinmaya Joshi tramite LinkedIn 29 Aug '11

29 Aug '11

LinkedIn ------------ Chinmaya Joshi ha chiesto di aggiungerti ai suoi collegamenti su LinkedIn: ------------------------------------------ Vorrei aggiungerti alla mia rete professionale su LinkedIn. Accetta l'invito di Chinmaya Joshi http://www.linkedin.com/e/fihlc9-grxnbthx-1b/s9zCzPfFBIFwqUg8JgtGw69rcczGuT… Visualizza l'invito di Chinmaya Joshi http://www.linkedin.com/e/fihlc9-grxnbthx-1b/s9zCzPfFBIFwqUg8JgtGw69rcczGuT… ------------------------------------------ SAPEVI CHE LinkedIn può trovare le risposte alle tue domande più difficili? Pubblica le domande più impegnative su Risposte di LinkedIn e potrai avvalerti dell'esperienza dei migliori professionisti al mondo. http://www.linkedin.com/e/fihlc9-grxnbthx-1b/ask/inv-23/ -- (c) 2011, LinkedIn Corporation

1 0

Re: [Chimera-users] electron density in Chimera
by Elaine Meng 27 Aug '11

27 Aug '11

On Aug 26, 2011, at 1:24 AM, Stefano Luciano Ciurli wrote: > Hello, > for a paper reporting a new structure, I would like to make a figure with Chimera, but I need a map that can be read. I have an mtz map that can be read with Coot, but I think I need to convert it to a format that Chimera can read. I cannot use the EDS server, because the file has not been released on the PDB. > How do I do that? > Stefano Hi Stefano, I didn't know anything about MTZ format, but found some explanation in the PHENIX mailing list that the program PHENIX can do the conversion: <http://phenix-online.org/pipermail/phenixbb/2011-March/016881.html> >From that message, "it's not a simple file format conversion. In this case MTZ file is supposed to contain Fourier map coefficients, and Xplor formatted file will contain Fourier image of electron density map (typically simply called "electron density map"). So this converson also involves a FT. " The PHENIX developers provide documentation and downloads for Linux and Mac. <http://www.phenix-online.org/version_docs/dev-713/phenix_documentation.html> Here's a list of the density formats that Chimera "knows": <http://plato.cgl.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#volume> Other Chimera developers or users may know more -- so it's generally better to send Chimera questions to chimera-users(a)cgl.ucsf.edu (which I CC'd here) instead of to me directly. Regards, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

3 2