August 2011 - Chimera-users - RBVI Mailing Lists

MatchMaker in version 1.5.3 (build 33475)
by John Rose 25 Aug '11

25 Aug '11

Hi, I have been using chimera since the late 1990s. In the previous versions I could use MatchMaker to superimpose two molecules and all the atoms were moved with the model. Noe I find that when I use MatchMaker the models are aligned BUT the non-reference structures shoe up in a licorice stick representatuin and I have not been able to either (1) generate a ribbon drawing of the non-reference structures or (2) get an all atom view of the non-reference structures. Am I missing something? The two structures are 1wdn and 1hpb. This happens on both the MAC and Linux platforms. This feature is important to several classes I teach so any help you can give me would be greatly appreciated. John John Rose Ph.D. Associate Professor B204B, The Fred C. Davison Life Sciences Complex 120 Green Street Department of Biochemistry and Molecular Biology University of Georgia Athens, GA 30602-7229 ========================================= Phone: 706-542-1750 Fax: 706-542-3077

3 2

Followup to my last question on MatchMaker
by John Rose 25 Aug '11

25 Aug '11

It looks like there is something going on with PDB entry 1HPB that is causing the problem. John John Rose Ph.D. Associate Professor B204B, The Fred C. Davison Life Sciences Complex 120 Green Street Department of Biochemistry and Molecular Biology University of Georgia Athens, GA 30602-7229 ========================================= Phone: 706-542-1750 Fax: 706-542-3077

1 0

molecular surface isolated to chain
by Jeffrey Kentner 24 Aug '11

24 Aug '11

Hello, I am trying to create a nice aesthetic model of a protein binding to DNA. When I show molecular surface, the program doesn't seem to be able to differentiate between the DNA chain and the protein chain. I either end up with a surface on the DNA which is not fully closed, or if I extend the surface via the 'surface zone' it simply begins to cover the protein as well... I have consulted the documentation and can not find any description of how one would isolate the molecular surface to a particular chain. Is this not possible in Chimera? Cheerio, Jeffrey

2 1

SSEHUnter and SSEBuilder questions
by Kristin Parent 24 Aug '11

24 Aug '11

Hello, I was hoping you could help me out. I am trying to locate secondary structure elements in an individual subunit of an icosahedral virus from a cryo-reconstruction. I have the entire virion in pif format and would like to use the density from a single subunit using SSEHUnter and SSEBuilder. I am not sure how best to get the volume data as a useable mrc input for this tool. I tried using the volume eraser to eliminate other areas in the map that are not the subunit I'd like. When I save the map and then the session, the subunit looks fine in the session, but if I open the subunit mrc file in a new session, I get what appears to be inverse density (the stuff I erased), and in the volume viewer, the density looks inverted. If I move the slide bar to the left, I end up with a solid cube. I am either doing something horribly wrong, or this is maybe not the best method for excising my subunit??? Please advise the best approach to creating a subunit mrc file that can be used by SSEHunter. Thanks in advance! Kristin Kristin Parent, Ph.D. University of California, San Diego Department of Chemistry and Biochemistry 9500 Gilman Drive, NSB 4104A, MC-0378 La Jolla, CA, 92093-0378 (858) 534-8038

2 1

(no subject)
by a kauz 24 Aug '11

24 Aug '11

I am currently trying to extract data (x,y,z coordinates) from a PDB file generated by Chimera (pdbrun command) The file looks like this: MODEL 1 HETATM 1 **** 1 7881.2318439.71911918.53 1.00 0.00 H HETATM 2 **** 2 7878.3608863.83911538.22 1.00 0.00 H HETATM 3 **** 3 7362.1978948.58411340.85 1.00 0.00 H HETATM 4 **** 4 8109.6319067.12510778.80 1.00 0.00 H HETATM 5 **** 5 8512.9689160.81011582.47 1.00 0.00 H HETATM 6 **** 6 8368.0819128.66911020.52 1.00 0.00 H HETATM 7 **** 7 7260.6139750.88411592.71 1.00 0.00 H HETATM 8 **** 8 5841.5699031.23313127.43 1.00 0.00 H HETATM 9 **** 9 6579.8098604.13912097.33 1.00 0.00 H HETATM 10 **** 10 7584.5978302.09511466.04 1.00 0.00 H HETATM 11 **** 11 8520.92710251.0411690.68 1.00 0.00 H HETATM 12 **** 12 9185.69810212.1111417.11 1.00 0.00 H (this is just an extract) How can I know how many decimal numbers each coordinate has? is there a way to set how many decimal numbers will be reported? or to put some kind of tab separation between the coordinates? thanks, Annamaria

3 2

Re: [Chimera-users] creating a peptide bond between two fragments
by Eric Pettersen 23 Aug '11

23 Aug '11

On Jun 7, 2011, at 2:30 PM, Glenn Millhauser wrote: > Hi Folks, > I am trying to add a four amino acid segment to the N-terminus of > a protein in the pdb. I can generate the four residue stretch and > move its C-term close to the N-term of the structured protein. I > can then select the C' and N atoms, which are about 1.0 Angstrom > apart. At that point, I am stuck. Not sure how to add a bond and > then create a proper structure. I've played around with Join > Models, but no luck. Without a peptide bond recognized by Chimera, > ribbons are discontinuous. Any ideas? > Many thanks, > glenn There is now a section of the Join Models page specifically for joining two peptides, so this problem should be easy to solve in the future. --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

a simple question about multiple sequence alignment
by Lan Hua 22 Aug '11

22 Aug '11

Hi all, I want to use chimera to create a multiple sequence alignment which will be used to build a model. From elsewhere, I know the pdb id of desirable templates, but I don't know how to create the alignment in the Chimera. Any inputs will be very much appreciated. Thank you! Best, Lan

2 2

Fwd: Showing more than a single centroid trace
by Francesco Pietra 22 Aug '11

22 Aug '11

There is still a problem that had previously escaped my attention. I.e., after the centroid sequence is obtained for model 0 and residue 1, I run the movie for model 1 and residue 2. That's OK, however the second series of centroids starts with progressive number where the first one had ended plus one (if the first series was 1-250, the second series starts from 251). This means that the first part of centroids for model 1 (corresponding to the centroids for model 0, i.e., 250) is not shown. I used define centroid radius ... color ... #modelnumber:residuename & :residuenumber where the residuename is the same for the two series of centroids. Can the command be modified so that both complete series of centroids is shown? I am using chimera production version 1.5.3 (build 33475) 2011-05-24 17:23:26 GMT on Debian i386 (I found this more stable than on Debian amd64 with GTX-580 as the sole graphic cards) Thanks francesco pietra ---------- Forwarded message ---------- From: Francesco Pietra <chiendarret(a)gmail.com> Date: Thu, Aug 18, 2011 at 8:08 PM Subject: Re: [Chimera-users] Showing more than a single centroid trace To: Eric Pettersen <pett(a)cgl.ucsf.edu> On Thu, Aug 18, 2011 at 7:48 PM, Eric Pettersen <pett(a)cgl.ucsf.edu> wrote: > Try selecting just the one ligand first with this: > sel #0:residuename & #0:residuenumber > then it and the environment around it with: > sel sel z<5 > --Eric That works fine, thank you very much francesco > Eric Pettersen > UCSF Computer Graphics Lab > http://www.cgl.ucsf.edu > On Aug 18, 2011, at 10:36 AM, Francesco Pietra wrote: > > On Thu, Aug 18, 2011 at 7:07 PM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > HI Francesco, > > Just put the model number wherever you need it, with no space before residue > name or number, maybe something like: > > sel #0:residuename & #0:residuenumber z<5 > > For me that works between the three ligands only. I.e, with a large > z<20, all the three residues are highlighted, while with z<3 only the > residue with the specified residue number is highlighted. The number > of atoms at the bottom line correspond. For example, with z<20, 6 > atoms, 3 bonds (three diatomic molecules) > > francesco > > > Elaine > > On Aug 18, 2011, at 9:46 AM, Francesco Pietra wrote: > > Hi Elaine: > > Thanks a lot. Could you also help me as how to find the environment of > > the moved ligand, when there are three of them with the same residue > > number? > > While define centroid works nicely with: > > define centroid radius# color # :residuename & :residuenumber > > sel #modelnumber :residuename & :residuenumber z<# > > does not. Could the command be modified to refer to only one of the > residues? > > Thanks > > francesco > > On Wed, Aug 17, 2011 at 7:34 PM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi Francesco, > > If your movies are different model numbers, you can put model number before > residue name, for example: > > #0:hem > > You can see what models you have in the Model Panel (under Favorites in > menu). > > Elaine > > On Aug 17, 2011, at 7:11 AM, Francesco Pietra wrote: > > Hi Elaine; > > I selected with line command the molecule that was giving the centroid > > sequence. I was interested in the surroundings of that biatomic > > molecule at various frame numbers. What I said, is that this is > > possible only for the first movie. On subsequent movies, superimposed > > to the first one, the line command always refers to that molecule of > > the first movie. > > francesco > > On Tue, Aug 16, 2011 at 7:38 PM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi Francesco, > > You cannot select centroid objects with a command -- they do not have > residue or atom names. You can only select them by clicking their lines in > the Axes/Planes/Centroids dialog, or by Ctrl-clicking on them in the Chimera > graphics window. > > Elaine > > On Aug 16, 2011, at 9:36 AM, Francesco Pietra wrote: > > Hi Elaine: > > I'll try your advice as soon as possible. However, turning mode1 out > > of view in model window while playing movie for model 1, the centroid > > for mode1 is still seen above model 0 and the trace for centroid for > > model 0 . What I could not do was to select the centroid for model 1, > > in order to highlight it. Command "sel :residuename" always selected > > the centroid for model 0. > > francesco > > On Tue, Aug 16, 2011 at 5:51 PM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi Francesco, > > I'm not sure I understand what you are asking. Maybe you are saying that > when you hide a model, the centroid is also hidden? > > Instead of hiding the model with the Model Panel "Shown" checkbox or command > "~modeldisplay", which hides everything in the model, you can undisplay the > protein parts and leave the centroid displayed. For example, if I had > protein models #0 and #1 and also centroids for each of those, I could > undisplay the protein part only of #0: > > ~display #0 > > ~ribbon #0 > > ~surf #0 > > (commands to undisplay atoms/bonds, ribbon, and molecular surface of model > #0). Then, you would have the protein #1 plus the centroids of both #0 and > #1 displayed. I hope this helps, > > Elaine > > ---------- > > Elaine C. Meng, Ph.D. > > UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > On Aug 15, 2011, at 11:36 PM, Francesco Pietra wrote: > > Hello: > > I would like to show several centroid traces for model 0, 1, 2, .. > > Actually, it is the same model, differing, in the movies, for the > > protein fluctuations. > > What I did, was to superimpose movie for model 1 to the already done > > movie for model 0, hiding the protein for model 1 and choosing a > > different color for the centroid. Doing that, the instant position of > > the centroid can only be color-highlighted for model 0. > > I wonder whether there is a better procedure to show the various > > centroid traces above a single protein model. > > thanks > > francesco pietra > > > > _______________________________________________ > > Chimera-users mailing list > > Chimera-users(a)cgl.ucsf.edu > > http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > > > > > _______________________________________________ > > Chimera-users mailing list > > Chimera-users(a)cgl.ucsf.edu > > http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > > > > > _______________________________________________ > > Chimera-users mailing list > > Chimera-users(a)cgl.ucsf.edu > > http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > > > > > _______________________________________________ > Chimera-users mailing list > Chimera-users(a)cgl.ucsf.edu > http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > > > > > >

2 1

register file extension .xmp for volume data
by Dieter Blaas 22 Aug '11

22 Aug '11

Hi, I routinely visualize spider format volume data that are output from Xmipp with the extension .xmp. This extension is not registered in Chimera and I have to scroll through the formats page each time to select 'spider volume data' or open the file with 'chimera spider:xxx.xmp'. Is there a way to make Chimera recognize this extension as 'spider format' automatically? There was an older Windows version that allowed to tell Chimera that all following data were of the same format as the first one but I have not seen this in any of the recent Linux versions. Thanks for hints, D. - ------------------------------------------------------------------------ Dieter Blaas, Max F. Perutz Laboratories Medical University of Vienna, Inst. Med. Biochem., Vienna Biocenter (VBC), Dr. Bohr Gasse 9/3, A-1030 Vienna, Austria, Tel: 0043 1 4277 61630, Fax: 0043 1 4277 9616, e-mail: dieter.blaas(a)meduniwien.ac.at ------------------------------------------------------------------------

2 2

<no subject>
by Sacha De Carlo 22 Aug '11

22 Aug '11

unsuscribe

2 1

Chimera-users August 2011