September 2012 - Chimera-users - RBVI Mailing Lists

volume planes tool
by Jeff Triffo 22 Jun '16

22 Jun '16

hi folks, anyone know if the volume plane tool will support arbitrary orientation of the plane any time soon? -Jeff

5 7

Re: [Chimera-users] Display a spider volume data in a specific orientation
by Elaine Meng 08 May '14

08 May '14

Hi Zongli, This is not my area of expertise (our expert is currently out of town) -- at first I thought you could use "Transform Molecule Coordinates" (under Tools... Movement), but now I see that it works only on atomic structures rather than maps: <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/transform/transfor… > It only works on molecular structures because it actually changes the atomic coordinates, without changing the model transformation. I've figured out one workaround, but it is both crazy and slightly tedious: (1) open your map (say as model 0). (2) open any atomic-resolution structure, it doesn't matter what, and open it twice -- now you have three models. Don't move them separately from the map (yet). Let's say the atomic structures are models 1 and 2. (3) use "Transform Molecule Coordinates" with desired Euler angles and shift on one copy of the atomic structure (say model 1). (4) use the match command to superimpose the other copy of the atomic structure on the one that was transformed: match #2 #1 (the command can use the whole models since they should have exactly the same atoms) (5) use the matrixcopy command to apply the transformation matrix of the second copy of the atomic structure to the map: matrixcopy 2 0 You might think "why do I need two copies of the atomic structure? can't I just transform one copy and then use matrixcopy?" ... in fact that's what I tried first, but after it didn't work, I realized it was because the Transform tool works by changing the coordinate values and not the stored matrix of the model. It is necessary to match the second copy to generate a corresponding matrix, and then matrixcopy can be used. I'm CC-ing the chimera-users(a)cgl.ucsf.edu list in case other Chimera users have suggestions. Our expert Tom G should be back next week and he might also have ideas. In general, it's better to send Chimera questions to that mailing list instead of just me, because I could be away from work or (like now) lacking a good answer! I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Apr 7, 2010, at 11:51 AM, Li, Zongli wrote: > Hi Elaine, > I have a spider volume data (or mrc density map) from which I got a > serious 2D projections. I have the Euler angles for each projection. > Is there a way in Chimera that I can use those Euler angles to > display the 3D spider volume data (or mrc density map) in a specific > orientation that corresponding to that 2D projection? > Thank you very much in advance. > Best, > Zongli > > **************************************** > Zongli Li, Ph.D. > > Howard Hughes Medical Institute > Department of Cell Biology > Harvard Medical School > C Building, Room 420B > 240 Longwood Avenue > Boston, MA 02115 > > Tel: 617-432-4095 (Office) > 617-432-4708 (EM Suite) > 617-432-4091 (Computer room) > Fax: 617-432-1144 > Email: zongli_li(a)hms.harvard.edu > *************************************** >

3 5

font size in pull-down menus
by Boaz Shaanan 09 Oct '13

09 Oct '13

Hi, Is there a way to change the font size of the pull-down menus? For some reason on the Windows (XP) v.1.5.1 they seem smaller to me. Nothing in terms of graphics (or my eyesight) has changed since I upgraded to 1.5.1 recently. Thanks, Boaz Thanks, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 ; Fax: 646-1710 Skype: boaz.shaanan‎

2 1

icosahedral reconstruction volume color
by Reginald McNulty 08 Nov '12

08 Nov '12

Dear Users, I've done a symmetric reconstruction utilizing Viper (I1) icosahedral symmetry with XMIPP. Is there a way to color my recon.vol file surface according to symmetry? Kind regards, Reggie -- Reginald McNulty, Ph.D. Postdoctoral Research Associate The Scripps Research Institute Johnson Lab Department of Molecular Biology La Jolla, California 92037 Email: rmcnulty(a)scripps.edu

4 9

Met CH3 and NH3+ hydrogen optimization
by Visvaldas K. 09 Oct '12

09 Oct '12

Dear colleagues, Regarding H addition to protein structures, there are indications that hydrogens of NH3+ groups of lysine or N-termini, and side chain methyls of methionines need a rotational optimization (Richardson & Richardson, Chapter 15 in "Structural Bioinformatics", 2nd ed., 2009, p. 380) . I think this problem is not too common, but I did encounter it at least once when I had to rotate manually a Methionine methyl to remove a clash with the ligand. I think Chimera doesn't perform this optimization, or does it? If it doesn't, perhaps this could be put on a list of future improvements:) Best regards, Vis Kairys Institute of Biotechnology Vilnius University

3 2

crystal structure reconstruction
by rainy908＠yahoo.com 01 Oct '12

01 Oct '12

Hi, I am new to Chimera. I have a PDB of a protein comprising of a loop region that appears to have slight alpha-helical behavior when visualized in Pymol. However, I doubt that this region is actually structured, and that this alpha-helical behavior is actually an artifact from experimental conditions. To double-check the validity of this loop, I was broadly advised that "crystal structure reconstruction" can be performed in Chimera. I suspect this is either the 'molmap' or "Fit in Map" feature? Sincerely, Lili

2 3

Error inizializing OpenGL
by Francesco Pietra 01 Oct '12

01 Oct '12

Hello: Following and upgrading of Debian GNU-Linux i386 testing (= wheezy) of my old PC francesco@deb32:~$ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation NV11DDR [GeForce2 MX200] (rev b2) francesco@deb32:~$ with modern kernel francesco@deb32:~$ uname -r 3.2.0-3-686-pae francesco@deb32:~$ chimera francesco@deb32:~$ chimera --version chimera production version 1.6.1 (build 35849) 2012-03-13 22:24:07 UTC francesco@deb32:~$ does not start anymore: Error inizializing OpenGl. Couldn't configure togl widget. Before I go messing the system, may be I can get advice on where to put the hands. libgotl is not installed, but the same occurs with my GTX-680 amd64 system, where chimera works fine. Thanks francesco pietra

2 1

Re: [Chimera-users] [chimera-dev] The style of Ribbon in alpha 1.7 version
by Elaine Meng 29 Sep '12

29 Sep '12

Hi Cheng, Actually the ribbon shape has not changed, but a bug in the lighting that made the ribbon look rounder than it really was has been fixed. (see release notes "general changes" http://www.cgl.ucsf.edu/chimera/docs/relnotes/snapshot.html#general ) You could use Ribbon Style Editor to make something that looks more similar to the old ribbon. I tried making a ribbon style shaped like a football (named "football") and combined that with a ribbon scaling with larger height for helix, sheet, and arrow base (named "fat"). I wasn't very careful drawing the football so you could probably make it better by drawing it more carefully. I attached a file you could use as your preferences file (although you would then lose your own earlier preferences), or you could text-edit to insert all of the lines in the attached file *except* the top and bottom lines into your existing preferences file. Either way, you should save a copy of your existing preferences file first so you don't lose your settings. Or, you could just make a fatter scaling and football-shaped cross section (style) in Ribbon Style Editor yourself, without using the attached file. If you do use the attached file, you could apply everything with commands: ribscale fat ribrepr football Chimera-dev is for programming questions - I'll CC the chimera-users email address since that is more appropriate for this issue, and others on the list may be interested. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Sep 29, 2012, at 3:17 PM, Cheng Wang wrote: > Dear Chimera Team, > Hi. > The ribbon style in 1.6 version is a little round for helix, while it is really flat in 1.7 version. I want to use v1.7 since several commands are really good for movie making eg. format option and transparency. However the ribbon style for helix is not as nice as it in 1.6. I am wondering how could I change the style of ribbon in 1.7 to be the same as in 1.6 since the ribbon style seams the same in the panel for both versions. > Many thanks. > Best, > Cheng

1 0

Specifying colour of surface cap when surface coloured by electrostatic potential
by Ashley Pike 28 Sep '12

28 Sep '12

Hi - Can't find answer to this question in manual. Is it possible to assign a uniform solid colour to a surface cap when the (clipped) surface is coloured by electrostatic potential (using external .dx file)? I know such capping can be done when the surface is coloured by some other attribute but have not found a way to specify in the above case. Any hints gratefully received. Many thanks, Ashley -- Dr. Ashley Pike Membrane Protein Crystallography | Structural Genomics Consortium | University of Oxford

2 3

Silhouette color change
by vamsee 27 Sep '12

27 Sep '12

Hi Elaine, I need to change the silhouette color of individual models and if possible for individual representations (ribbon, surface or atoms). Is there a command line option that I could use? (maybe set?) Thanks in advance Vamsee

2 1