April 2013 - Chimera-users - RBVI Mailing Lists

Hide bonds
by Masaki Uchida 23 Apr '13

23 Apr '13

Dear Chimera users Is it possible to hide bonds between spheres (atoms/bonds view)? I have a "pdb" file which is a bead model of a protein generated by SAXS analysis. When I open the file and changed a view to "sphere" under "atoms/bonds", bonds between beads are shown. I believe the bonds are meaningless in this case and would like to show just spheres (beads). Thank you in advance for your help -- ********************************************** Masaki Uchida Department of Chemistry&Biochemistry Montana State University **********************************************

2 2

dock
by LW 23 Apr '13

23 Apr '13

Dear all, As attached, I have a structure of Saposin C in the presence of SDS micelle solved using NMR. I took the first model out of its 20-structure ensemble and generated SapC_one_model.pdb. I also have a PDB file(as attached )built to model SDS micelle surrounded by water. Does Chimera allow people to dock these two molecules and generate a combined PDB file for further analysis? While the structure of Saposin C in the presence of SDS micelle, NMR data indicate that the open hydrophobic core is in contact with SDS micelle. Is it possible to use Chimera to determine the relative orientation of the two molecules where (i), they are in intimate contact, (ii), there is no clash, (iii), the shape complementarity is at its optimal? Any clue would be much appreciated. Levi

2 4

batch production of images
by Benjamin SCHWARZ 23 Apr '13

23 Apr '13

Dear list, I am considering to use chimera to render (a tons of) pictures of models that I generated and issued in nice markerSet (.cmm) files. 1. If I understand well, the only way to do that is through the linux headless version, and there is no way to do that under MacOS X for the moment 2. I should then use the "copy" command. Something like : chimera --nogui --script "myscript.py" where myscript.py should contain something like "from chimera import runCommand; runCommand('copy file pipo.png')" 3. All my models were produced in a same cartesian, and I'd like to keep the orientation and "picture frame" similar for all pictures. What I mean here, is that I'd like to be able to set my camera somewhere, looking in a specified direction, which I would probably do under the chimera GUI; and then, shoot all my pictures from that point of view on a batch mode. How shall I do that (set a point of view for the camera and use it on a batchmode) ? Thanks a lot again for your great job, and your constant answers --Ben

2 4

stereo viewing with consumer graphics cards
by Greg Couch 22 Apr '13

22 Apr '13

In the past, Chimera has always needed a workstation-class graphics card (e.g., AMD FirePro or NVIDIA Quadro) to view molecules in 3D stereo and read dialogs at the same time. Now that there are 3D HDTVs, that has changed. I have just confirmed that with a computer running Microsoft Windows 8, with an AMD Radeon HD 7850 graphics card, and a Panasonic 3D HDTV, that 3D stereo worked without fiddling with any display settings. That is awesome -- "without fiddling with any display settings". Windows 8 is a requirement, Windows 7 will not work. I am unaware of any effort to get Linux to work. There is a good chance that Apple Mac OS X will work and we plan to test that soon. Any recent AMD Radeon HD graphics card with HD3D, or NVIDIA GeForce graphics card with 3D Vision support, should work. I hope to test a NVIDIA graphics card soon to confirm that. And supposedly, any 3D HDTV will work. The 3D HDTV in the test was a Panasonic TC-P50GT25, from 2010/2011, and I expect that any 3D HDTV that support a full resolution stereoscopic 3D format will work well. Non-full resolution formats would work for the 3D stereo images, but the associated 2D dialogs would be unreadable. Happy 3D viewing! Greg

1 0

Distance between atoms at the interface
by Mehdi Talebzadeh Farooji 22 Apr '13

22 Apr '13

Dear Chimera Users, I was wondering if there is a way to show distances between two objects (two chains) and filter them; for instance to display all of the distnaces between atomes of two interacting protein chains which are less than 6 A. Any help would be much appreciated, Mehdi

2 1

View Dock plugin
by James Starlight 22 Apr '13

22 Apr '13

Dear Chimera users! I have a question about the View Dock plugin. >From some servers usually I've obtained pdb file of the target protein as well as separate file consisted of all predicted posses which I can visualize in Chimera. So I wounder to know 1- How I could hide hydrogen bonds as well as protein's side chains of the residues which are in contact with the ligands ( on the default both of that two options are turned ON) 2- How I could properly save some poses as the separate pdb models ? E.g when I chose to same target.pdb with the #1_pose from the chimera saving menu I obtain protein and ligand with the surrounded residues as two models in one pdb file ( so I must manually merge it in one model and delete residues from the second model). Does it possible to obtain protein-ligand complex as one model as the output? Thanks for help, James

2 1

multiple volumes' orientation in space
by Yunji Wu 22 Apr '13

22 Apr '13

Dear all -- I am a total newb to Chimera, and I have an issue which I feel like can be easily resolved with your help. I am trying to make a 'structure-based schematic' with the purpose of clarifying the locations of the domains of a complicated crystal structure. There are 12 domains in this structure that I want to represent as 'blobs', and they are oriented in space in a very confusing way, especially if represented as the standard ribbons or cartoons. I used pdb2mrc (in EMAN2) to create 25Å maps from my .pdb files for (with the command e2pdb2mrc.py -R 25 H.pdb K.mrc). These show up fine individually in Chimera, but the separate maps are not oriented properly in space. It looks like the map volume files have no instructions about where to be in space relative to the coordinate files that generated them. If I take a single .pdb file with all 4 chains and generate a single .mrc file, I obviously get something that has the chains correctly oriented. This is less useful and satisfying, since I'd like to make separate chains into separate map volumes so I can color them separately (for example: chains H,K,L,M as H.pdb, K.pdb, L.pdb, M.pdb into H.mrc, K.mrc, L.mrc, M.mrc). When these 4 volumes are plotted in Chimera, they appear to be semi-randomly piled in the middle of the viewing field, with no correlation to the original pdb coordinates (attached screenshot of volumes from 4 chains, calculated from 4 individual pdb files). Is this just a result of a preset in Chimera that I am not aware of that needs to be adjusted? If I plot the original pdb file with the 4 chains from which these volumes were generated, there is no spatial correlation between the structure and the volumes. In trying to solve this, I know that "Fit to Map" will allow the coordinates to be fit into the map volume, but I cannot seem to fit the separately map to the individual chains, which would be a longer way around the issue. Is there some way to do this, or to just create maps that are oriented properly in space relative to each other? Thank you so much for your help, Yunji Wu

2 1

Radius of gyratiion
by George Tzotzos 22 Apr '13

22 Apr '13

Hi everybody, I've search the archive to find a script for measure protein radius of gyration. I came across the following link: http://plato.cgl.ucsf.edu/pipermail/chimera-users/2012-February/007257.html I'm now trying to find the actual script <radius-of-gyration.py>. Any ideas how to retrieve it? Many thanks in advance George

3 2

euler angle
by Jingchuan Sun 19 Apr '13

19 Apr '13

Hi, After I rotate a volume to a specific orientation, and "save map as" in "volume viewer", the saved volume are still in the original orientation. Could I save it in the new orientation. If I could display the current euler angles, I can rotate it in other software. But how could I display euler angle after rotation? Thanks! Jim

3 4

Doubt
by Víctor J. Gallardo López 19 Apr '13

19 Apr '13

Good Morning Mr./Ms., I have a bit problem with the molecular modeling. I have a dímer (the two chains of this protein are the same sequence) and I want to put 34 residues at the N-terminal in each chain. I load my fasta (with this residues addition) in chimera and I blast a protein structure in the PDB that has the same residues as my protein without this addition. When I modeller (homology) my fasta, the programm only gives me one of the chain with this addition but I need the whole protein (with the two chains and with this residue addition for each chain as well). How can I do it? I hope you resolve my problems. Thanks you for you attention. Sincerely, Víctor J. Gallardo

2 1

Chimera-users April 2013