September 2013 - Chimera-users - RBVI Mailing Lists

Building DNA along A PBD Using RNA command
by Joshua Carter 23 Sep '13

23 Sep '13

Hi, I'm working on a project in chimera that involves modeling the binding of a RNA-guided protein complex to a double stranded piece of DNA. What I need to do is be able to is either match a DNA pdb to the existing RNA pdb I have or build one using the rna command in chimera. I know there is a path command, is there any way I could specify that to build along a pdb I have already? Or am I just barking up the wrong tree entirely? Thanks,Josh

2 1

Question about multi align viewer
by Sean Connell 20 Sep '13

20 Sep '13

This e-mail comes from CIC bioGUNE. The e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Any unauthorised dissemination or copying of this e-mail or its attachments, and any use or disclosure of any information contained in them, is strictly prohibited and may be illegal. If you have received this e-mail in error, please notify or telephone + 34 944 06 13 00 and delete it from your system. Please consider the environment before printing this email

1 0

selecting a specific residue
by Elaine Meng 19 Sep '13

19 Sep '13

On Sep 18, 2013, at 8:53 PM, Serina Doolittle <serinadoolittle(a)me.com> wrote: > Hi again, > > So now i have another question... > I have selected the ligand because that is what my research mentor and I are interested in (the active site and ligand binding etc.) however, when i select "ligand" it also high lights other molecules around the protein, more around the surface, like butanol - how can i just select the ligand NADPH and not have to select the other small molecule ligands that are not part of the active site of the protein? can i do that? > > Serina Doolittle > Thanks! > Hi Serina, The "ligand" detection uses automatic rules and won't always get what you expect, but there are many other ways to select a specific residue. For example, you can select by residue name and/or number, or with the mouse in the Chimera window. With mouse: Ctrl-click on some atom selects it, and then keyboard up arrow will promote the selection to the whole residue. With command: specify residue name or number, e.g. select :nad select :254.a … would select residue named NAD, or residue 254 in chain A respectively. How do you find out the residue name or number? One way is by hovering the mouse over some atom or bond in the residue, which will pop up a balloon that shows atom name, residue name, and residue number. With menu: Select… Residue… allows selecting by name (all the residue names present will be listed in the menu). NADPH might have residue name NAP, NAD or something like that, since PDB files have 3-letter residue names. That would select all residues of that type, so you'd probably want to use one of the other methods if there are multiple NADPH molecules and you only wanted to select a particular one. Manual pages on selection and command-line atom specification: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/selection.html> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/frameatom_spec.html> Also, you may want to look through the "getting started" tutorial to become more familiar with Chimera. <http://www.rbvi.ucsf.edu/Outreach/Tutorials/GettingStarted.html> I hope this helps, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Hello
by A Amiri 19 Sep '13

19 Sep '13

Hello. I have a problem with chimera! i want to join two pdb file together by C-N peptide bond. Actually this is a modeling of a fusion protein that one part of its, is a protein and another part is a linker. I need a complete structure. I select the carbon atom from one model and nitrogen atom from another model. I use the "build structure<join modesl" menu for this purpose but the "apply" button is inactive still and i don't know how i can activate it! please help me. ________________________________

2 2

Re: [Chimera-users] vop cover
by Elaine Meng 18 Sep '13

18 Sep '13

Hi Pradeep, That message is saying you must specify the density map. I.e. if the atomic structure is model #0 and the density map is model #1, the command could be something like vop cover #1 atom #0 Command usage and options: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/vop.html#cover> Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco P.S. it is recommended you send Chimera questions to chimera-users(a)cgl.ucsf.edu instead of to me directly - thanks! On Sep 18, 2013, at 2:02 PM, Pradeep Pallan wrote: > Hi Elaine, > > I was looking at using vop cover. I have a case where part of the molecule > is not within electron density box. The map cuts off at the unit cell dimensions, > and my space group is P1. Where I need edensity is approximately at y= -10. > When I try the command > 'vop cover "atom"', it gives the message "file.pdb is not a volume". > > Is this the right way of getting the molecule covered in e density or do I need > to use a different option. > > Thank you, > PP

2 1

Problem Using Transparency Command in Chimera
by Joshua Carter 18 Sep '13

18 Sep '13

Hi, My name is Josh Carter and I am an undergraduate researcher working at Montana State University. I am using chimera to make a movie a a protein complex interaction and I'm having trouble with the transparency command. When I type in just the command into chimera it doesn't even recognize it as a command. surftransp works but transp or transparency aren't recognized. Is there a bug fix I can run for this? Thanks,Josh

2 1

How to determine the distance from SG of Cys to the centroid of a nearby Trp ring
by Pande, Ajay K 18 Sep '13

18 Sep '13

I am using Tools/Structure Analysis/Axes -Planes-Centroids. Selecting the Trp Indole ring, obtaining the centroid. Then selecting SG of Cys and the centroid and drawing an axis. That axis does not seem to pass (exactly) through the SG and Centroid- that' my first problem, the 2nd problem is to get the distance between the centroid and SG.

3 7

colour by attributes is only colouring one chain of the dimer, how to make the colouring apply to both chains of homodimer
by Anne-Frances Miller 17 Sep '13

17 Sep '13

Dear team Chimers 1- Thank you for GREAT software ! 2- How to make the colouring apply to both chains of homodimer ? I have a homodimer in which features of the active site derive from both monomers so the degree of active site conservation will only show up if I can apply colour by attributes to both monomers (attribute will be conservation) Right now, colour by attributes is only colouring one chain of the dimer, chain A. Anne-Frances Anne-Frances Miller Professor of Chemistry Director, Magnetic Resonance Centre University of Kentucky Dept. Chemistry, 505 Rose Street Lexington KY 40506-0055

2 2

Chimera Questions
by Serina Doolittle 17 Sep '13

17 Sep '13

Hi, My name is Serina Doolittle. I am an undergraduate research student at Armstrong Atlantic State University in Savannah, Ga. I am currently using Chimera to build two protein models. I have the proteins in the form that I want them in to 3D print. However, one of them is not a single chain protein. It has chain A and B. I hid chain B and focused on chain A because of the simplicity for the 3D protein model that I want. However, when you hide chain B and you put chain A on "show surface" that are like little holes or blotches missing from the protein where chain B is suppose to be. Is there anyway that I can fix this problem and single out chain A to make it look like it is completely lone in the "show surface" view. If you would like I will send you the Chimera file ("session"). That way you can visualize what I am trying to do. Serina Doolittle serinadoolittle(a)me.com 912-665-3259 Armstrong Atlantic State University Student

3 6

How to move a domain in mouse mode /move selection
by Juergen Joachim Mueller 12 Sep '13

12 Sep '13

Hallo, how can I move a domain consisting of 3 chains using mouse mode/ move selection? I will use chain A: 6-121, chainB: 7-103, Chain C: 6-103. The selection by command line takes always the longest number 121 for all three chains - A:6-121, B:7-121, C:6-121. Greetings, Jürgen (Chimera production version 1.8 (build 38824) Windows8)

2 2

Chimera-users September 2013