June 2015 - Chimera-users - RBVI Mailing Lists

measure a mean intensity of a segmented map
by 李智海 23 Jun '15

23 Jun '15

Hi, Here I want to evaluate the flexibility of variable domains of a density map. How can I quantify the mean intensity of segmented parts by Chimera? Thanks! Best wishes! Zhihai Li Ph.D student in State Key Laboratory of Molecular Vaccinology and Molecular Diagnostics. School of Life Sciences, Xiamen University. Xiang'an Road(South), Xiang'an District, Xiamen City, Fujian Province, China.

2 1

Attribute Error: 'AtomType' object has no attribute 'amber_atom_type'
by Karl Sebby 22 Jun '15

22 Jun '15

Hi I am modifying several ligand/protein complexes; usually with the “Build Structures” tool. I modify ligands by changing and deleting atoms, or by using “Join Models” after building or importing a structure with “Start structure”. Sometimes, minimizing the ligand works fine, but other times I get the error: “Attribute Error: ‘AtomType’ object has no attribute ‘amber_atom_type’”. I cannot figure out what is causing this error or how to fix it. It seems to happen when I begin working from a saved session or a pdb that was written with the ‘write’ command and not when I go through a whole series of steps in one shot. Any ideas on what is going on? Thanks, All the best, Karl -- Dr Karl Sebby Left Side Research LLC 1661 K M Ranch Road Whitefish Montana 59937 Office: 406 623 4773

2 2

Using the findHbond via Python Midas Module
by Ahir Pushpanath 22 Jun '15

22 Jun '15

Dear All, I am confused about what input I need to provide to the findHbond command in the FindHBond midas module. This is the help() on the command. findHBonds(models, intermodel=True, intramodel=True, donors=None, acceptors=None, distSlop=0.0, angleSlop=0.0, interSubmodel=False, cacheDA=False). For example if I want to find all H bonds between a pre-selected group of residues in loop, saved as: loop = chimera.selection.currentAtoms() and the rest of the protein molecule, what command would I have to run? I am assuming the output(such as the one given in the findHbonds runcommand) would be saved into a variable if I provide one? Ahir -- Dr. Ahir Pushpanath* PhD.* Senior Biologist, Johnson Matthey.

2 1

help please
by Sezer Akgöl 22 Jun '15

22 Jun '15

how can I associate 2 protein with each other from their C and N terminals respectively

2 1

Feature request - lock center of rotation to center of view ("pseudo-Coot mode")
by Oliver Clarke 22 Jun '15

22 Jun '15

Hi, I have a request for a future version of Chimera - would it be possible to add a command or menu item that (reversibly) locks the center of rotation to the center of view, such that when the view is translated, the cofr is updated automatically also? This is the way structure navigation works in Coot, and I find it is a much more intuitive and precise way to travel when examining the finer details of a structure (as one would expect given that the main purpose of Coot is model building while Chimera is exceptionally good for structural analysis and visualization). This would make navigation of large structures much easier, particularly when one is just browsing around the structure. In addition, it would be nice to have a dynamically updated pseudoatom to indicate the current center of rotation - this is implemented in Coot as the “pink pointer”, and I find it very helpful for getting my bearings. Cheers, Oliver.

2 1

Chimera in Virtual machine
by Milo Westler 18 Jun '15

18 Jun '15

Well I thought I had this figured out, but then my VM broke and I can't get chimera to run in my VM again. I am running Vritualbox with a guest system of ubuntu-mate 15.04. I want to be able to use chimera in the VM for a workshop that we are presenting. I have installed the 64 bit version for linux. I get: ~> chimera pci id for fd 4: 80ee:beef, driver (null) libGL error: core dri or dri2 extension not found libGL error: failed to load driver: vboxvideo libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 3 (X_GLXCreateContext) Value in failed request: 0x0 Serial number of failed request: 751 Current serial number in output stream: 752 ~> And when I run: /opt/UCSF/Chimera64-1.10.1/share> python __main__.py Chimera is misconfigured. Please reinstall chimera. Thanks, -- -- Milo =================================================== National Magnetic Resonance Facility at Madison An NIH-Supported Resource Center W. Milo Westler, Ph.D. NMRFAM Director Senior Scientist and Adjunct Professor Department of Biochemistry University of Wisconsin-Madison DeLuca Biochemistry Laboratories 433 Babcock Drive Rm B160D Madison, WI USA 53706-1544 EMAIL: milo(a)nmrfam.wisc.edu PHONE: (608)-263-9599 FAX: (608)-263-1722 ======================================================================= ========

2 1

Query on GPI-anchor proteins
by Aditya Padhi 17 Jun '15

17 Jun '15

Dear Chimera Users, I am working on a protein, which is known to cleave few GPI-anchor proteins (Glycosylphosphatidylinisotol). Also, I know that there are several other candidate GPI-anchor proteins which may or may not be cleaved by my protein of interest. I was wondering, if there is any tool/method in Chimera using which I can atleast get some preliminary information on which of the proteins that could be probably cleaved by my protein of interest. The 3D structure of my protein of interest and most of the GPI-anchor proteins is not available. I was therefore wondering if there is any such tools/methods available that I am missing using which I can find out which of the GPI-anchor proteins are being cleaved. Any suggestion/guidance would be highly appreciated. Thank you so much, Aditya

2 1

What happened to my model?
by Sara Cuellar 17 Jun '15

17 Jun '15

So, in my line of work we are focusing on the protein Dihydrofolate Reductase. Using Jmol, I was able to remove all chains except for chain A, and also increased the diameter of the backbone so that it may be printed. When I opened it in Chimera to export it from VRML file to an STL file, it still looked fine. However, when it was opened in my 3d printing program, parts of the protein were missing. All I see is floating fragments. Is there any way I can fix this using chimera? I have included images of the protein.

2 2

Scripted registration of a perframe python script
by Kersey Black 17 Jun '15

17 Jun '15

Hi, I have been 'opening' a python script file from within Chimera to start a session and in that script I open the MovieDialog manager (mdm) and read in a pdb with a series of models to be viewed as a trajectory. That part is working thanks to help from other responses in chimera-users. To modify the molecule (color, etc) it seems like the mdm.ensemble.molecule is giving me the access, though that may not be the right approach for my needs, because it seems to act on all frames. What I would like to do, from within this same initial python script, is to apply/register a perframe (also in python) script to control things like color on a frame by frame basis. I would like to do this as a way of keeping all of the setup in a single script file such that then I just need to record the movie manually, or perhaps there is a way to do this also from the script. Thanks much for any help and/or direction to documentation on the python api to the MovieDialog that allows control of these functions. Kersey

3 2

ImportError: no module named chimera
by 陈雷 16 Jun '15

16 Jun '15

Hello, I got a problem when calling chimera in a python script. ImportError: no module named chimera Here is the line in my script: from chimera import runCommand. Python version is 2.6.6 and chimera is 1.8 in Linux. Would you please help me out with this? Thanks. Best regards, Ryan

2 1