December 2016 - Chimera-users - RBVI Mailing Lists

symmetry axis
by chemocev marker 08 Dec '16

08 Dec '16

Hi All I am interested to measure the symmetry axis of individual sub-unit (chain A & chain B) along with the symmetry axis of the heterodimer (AB). Each chain has 2 domains and 2 fold rotations axis, and I can measure by removing 1 chain and measure for the other. Is there way to measure the inter-domain symmetry axis of the heterodimer molecule. best Jiri

2 3

Fwd: chimera minimize option
by Jacqueline Vitali 07 Dec '16

07 Dec '16

It puckers ASN and ASP (and probably other amino acids). (I run it to relieve steric conflicts only) How do you fix this? And can you run it with the whole protein selected?

4 5

question
by A G Szabo 06 Dec '16

06 Dec '16

You have been very helpful in explaining different items that use the command line. I have a PDB file that was determined by NMR. Thus there are a large number of chains number as pdb (#0.1) Chain A etc. So I know that I can select a single chain, and build up an image with Chains A, B, etc using the #0.1 chain number. I want to visualize three Gly residues in one chain. So I learned that I can use the command ribbackbone to visualize the backbone atoms of the amino acids that I want to show. So when I use that command all the backbone atoms of the residues selected are visualized including the side chains. I also know that if I use the command ~ribbackbone all the backbone atoms are suppressed leaving only the atoms of the side chains. I know that without any residues or atoms specified the command applies to the whole model. Now as I said that I want to visualize three Gly residues in one of the chains. The Gly residue numbers are 33, 37, 38. They are on Chain #0.1 K. The information on the ribbackbone in the Chimera users guide, indicates that I should be able to do this by using parameters termed atom-spec. i.e. ribbackbone atom-spec <frameatom_spec.html> I looked elsewhere for how to designate the parameters for atom-spec and tried a few things, but I was not able to achieve the specificity of showing the backbone atoms of only the Gly residues. I don't think that I have to indicate that I want only the Gly residues in Chain K #0.1 because I can select the Gly residues from the sequence of Chain K #0.1. So after this long description of what I want to do, would you kindly inform me of how I can visualize the backbone atoms of only Gly. Thank you Arthur G. Szabo

2 8

Re: [Chimera-users] Chimera -> Povray
by Elaine Meng 05 Dec '16

05 Dec '16

Hi Lothar, If you use "File… Export Scene” (instead of Save Image) or the “export” command, there is an option to save a file for POV-Ray without rendering: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/export.html> I hope this helps, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco > On Dec 5, 2016, at 3:07 PM, esserlo(a)helix.nih.gov wrote: > > Hi, > currently, I am using chimera to make a figure for publication and render > the result in povray. However the figure is a bit complex - with a gradient > background just to mention one thing- so that I have to edit the .pov file. > Is there a way to ask chimera to output the .pov file but not render it in > povray right away (that would save time as I need to edit it first!). > > Unfortunately in the "save image" menu, using povray, I did not find a > checkbox that would enable chimera to write out .pov only. > Thanks for any advice. > Lothar >

1 0

difficulty in using chimera for large PDB files
by Shruti Khare 05 Dec '16

05 Dec '16

Dear Sir/Madam, When we use chimera to visualize PDB files with ~18,000 atoms (PDB ID 5FUU) even rotating the molecule is slow in chimera. The computer has 6GB RAM. Would upgrading RAM help or we need to get a graphics card installed? Graphics card capacity should be 2GB or higher? Could you please tell me the minimum computer configuration required by chimera to handle large PDB files? Also what is chimera's maximum limit for handling PDB files given a computer with very good configuration? Thank you. -- Shruti Khare Graduate Student Prof. Raghavan Varadarajan Lab Molecular Biophysics Unit Indian Institute of Science Bangalore +91-80-2293-2612 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

pipes and planks
by Kyle Morris 02 Dec '16

02 Dec '16

Dear Chimera dev, I am using the pipes representation. In this case is it still possible to color/highlight a segment by residue number? Using the normal commands when displaying pipes doesn’t update the color, only on the original model. Thanks for your help! Best wishes, Kyle

2 3

Selected measure angles
by Soumya Govinda Remesh 01 Dec '16

01 Dec '16

Hello, I have just modified the loop script available here ( http://www.rbvi.ucsf.edu/chimera/docs/ProgrammersGuide/basicPrimer.html) to measure certain angles and distances. I just want to know if there is a way to export the individual values of angles and distances to a file other than parsing from the reply-log. Thank you. Best, Soumya Govinda Remesh, Ph.D. Postdoctoral Fellow at Advanced Light Source Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 6R2100 Berkeley, CA 94720 (phone) 510-495-8179 (cell) 804-402-8730 sgremesh(a)lbl.gov

2 2

saving pdb with transformed coordinates
by Michael Elbaum 01 Dec '16

01 Dec '16

Dear Chimera people, I'm trying to create a series of pdb files showing a single structure rotated around a given axis. Using the GUI I can turn the molecule and save the pdb after unclicking the "Use untransformed coordinates" box. However, when I run a script using the write command I don't know how to invoke this option. The docs on the "relative" option suggest that the default is to write transformed coordinates. I've tried the following: for i in xrange(0,90,10): rc("rock " + "y " + str(i) + " 1") fn = basefn + str(i) + '.pdb' rc("write format pdb 0 " + fn) and the files end up identical although the rotation around y does appear on the screen. I had the problem in version 1.10.2 and it remains after upgrading to 1.11. thanks for your help, Michael

3 3

Unit cell
by Neha Gandhi 01 Dec '16

01 Dec '16

Hi Elaine, I have tried to look at the unit cell information of pdb Id :3HR2. It is a fiber diffraction structure of collagen with only CA coordinates. I tried using different programs like VMD to visualise unit cell, the unit cell is at the beginning of N terminus in agreement with experimental paper. Whereas in Chimera it is not the case. How can I visualize the unit cell of 3HR2 structure in Chimera and also number of molecules within one unit cell? Many thanks, Neha -- Regards, Dr. Neha S. Gandhi, Vice Chancellor's Research Fellow, Queensland University of Technology, 2 George Street, Brisbane, QLD 4000 Australia LinkedIn Research Gate

2 5

Re: [Chimera-users] failing to open saved PDBs
by Healey, Joe 30 Nov '16

30 Nov '16

Hi Elaine, OK, that is what I had expected to happen yes - and that NMR ensemble looks to be what I was anticipating. I've attached the PDB chimera created here. I'm no expert on PDB internal formatting but it at least looks to me like there are coordinates, sequence information etc etc. I had thought that I had taken care to make sure whole models were saved (not just sel atoms), but I'll replicate it to make sure. Applying the preset in any event didn't work. Maybe you can spot what's wrong with it? Joe Healey M.Sc. B.Sc. (Hons) PhD Student MOAC CDT, Senate House University of Warwick Coventry CV47AL Mob: +44 (0) 7536 042620 | Email: J.R.J.Healey(a)warwick.ac.uk Jointly working in: Waterfield Lab<http://www2.warwick.ac.uk/fac/med/research/tsm/microinfect/staff/waterfield…> (WMS Microbiology and Infection Unit) and the Gibson Lab<http://www2.warwick.ac.uk/fac/sci/chemistry/research/gibson/gibsongroup/> (Warwick Chemistry) Twitter: @JRJHealey<https://twitter.com/JRJHealey> | Website: MOAC Page<http://www2.warwick.ac.uk/fac/sci/moac/people/students/2013/joseph_healey>

2 2