December 2019 - Chimera-users - RBVI Mailing Lists

Fw: Open MTZ file
by Williams, Joanne 20 Aug '20

20 Aug '20

Hello! Can you help with the inquiry below? thanks, Jo ________________________________ From: Sharyn Endow, Ph.D. <sharyn.endow(a)duke.edu> Sent: Thursday, February 22, 2018 5:01 AM To: chimera(a)cgl.ucsf.edu Subject: Open MTZ file Is it possible to open an .mtz file in Chimera? ~~~~~~~~~~~~~~~~~~~~~~~~~~ Sharyn A. Endow, PhD Professor of Cell Biology, DUMC Professor of NBD, Duke-NUS PO Box 3709 450 Sands Bldg/Research Drive Durham, NC 27710 USA T 919 684-4311 F 919 681-9929 ~~~~~~~~~~~~~~~~~~~~~~~~~~~

5 6

Auto-associate define attribute/render by attribute
by Healey, Joseph 24 Jan '20

24 Jan '20

Hi Chimera team, I’m working on a script to automatically render proteins in a complex by attributes (in this case, a number of scores obtained from different immunogenicity prediction algorithms). I currently have the script outputting attribute files as intended, but ideally I’d like to define the same attributes across all the chains of the model, which are made up of a number of different proteins. Is there any way for me to define the attribute file, or utilise some functionality to auto-associate an attribute file with all of the chains which have the correct sequence (similarly to how the sequence alignment input works at the moment?). Currently the attribute file is only using ‘numbered’ coordinates (:1, :2, :3…etc) , rather than the actual sequence. Since there’s no chain information in the attribute files, I’m not sure how I can go about connecting it to the right structure, other than manually at the moment? Many thanks, Joe Dr. Joseph Healey Ph.D. M.Sc. B.Sc. (Hons) MRSB Research Fellow Warwick Medical School University of Warwick Coventry CV47AL Mob: +44 (0) 7536 042620 | Twitter: @JRJHealey<https://twitter.com/JRJHealey> | Website<http://www2.warwick.ac.uk/fac/sci/moac/people/students/2013/joseph_healey> Email: J.Healey.1(a)warwick.ac.uk<mailto:J.Healey.1@warwick.ac.uk> | ORCID: orcid.org/0000-0002-9569-6738

3 13

Fwd: Downloading HIV PDB 3j3q?
by Elaine Meng 13 Jan '20

13 Jan '20

> > From: Divjak Maja <Maja.Divjak(a)petermac.org> > Subject: Downloading HIV PDB 3j3q? > Date: April 1, 2019 at 5:23:39 AM PDT > To: Elaine Meng <meng(a)cgl.ucsf.edu> > > Hi Elaine, > > It's me again! Hope you had a nice weekend... > > I'm having some trouble downloading the HIV capsid file, PDB 3j3q. When I try to import it to Chimera it begins downloading, but the molecule never quite appears, even though it ends up in the entry list. The screen stays blue like it has yet to be uploaded. If I try to upload it from the list, again, nothing appears. I realise the molecule is very large, but I think I'm missing something important here? > > Thanks so much for your help, as always, > > Maja > > Dr Maja Divjak > BAppSc(Hons), PhD, Grad Cert 3D Animation (AFTRS) > Biomedical Animator > Office of Cancer Research > Hi Maja, (forwarding to the address that should be used for for Chimera questions) It is probably just too big for the memory on your computer to open this structure in Chimera. Depending on what you’re trying to do with this capsid, maybe you could try using ChimeraX instead of Chimera. It handles large structures much more efficiently, but it does not have the same set of features as Chimera. <http://www.rbvi.ucsf.edu/chimerax/index.html <http://www.rbvi.ucsf.edu/chimerax/index.html>> If you are just trying to get the atomic coordinates of the entire capsid, they are already in the file(s) you could download directly from the RCSB PDB without using any visualization program. <https://www.rcsb.org/structure/3j3q <https://www.rcsb.org/structure/3j3q>> Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

2 5

Electrostatic Potential
by Fernando Villa 10 Jan '20

10 Jan '20

Dear all Chimera users In UCSF ChimeraX version 0.91 (2019-08-30) I opened a .pqr file (generated with pdb2pqr in Chimera 1.14) and then I opened a .dx file (generated with APBS in Chimera 1.14) Then I input the commands: >surface >color electrostatic #1 map #2 palette -10,red:0,white:10,blue [image: image.png] Is it possible to calculate the red and blue area in Å2 of the molecule? Best regards, Fernando ATTE Fernando Villa Díaz

5 17

Fit model and density map
by Guo, Wangbiao 02 Jan '20

02 Jan '20

Is there any one knows how to fit the density map to this red model? [cid:71FF4B2F-87EA-443B-B280-CE3ABEA9B11B@its.yale.internal] On Dec 24, 2019, at 12:26 PM, chimera-users-request(a)cgl.ucsf.edu<mailto:chimera-users-request@cgl.ucsf.edu> wrote: Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu<mailto:chimera-users@cgl.ucsf.edu> To subscribe or unsubscribe via the World Wide Web, visit https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fplato.cgl.… or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (labe boye) (Boaz Shaanan) - correction (Boaz Shaanan) ---------------------------------------------------------------------- Message: 1 Date: Tue, 24 Dec 2019 17:26:14 +0000 From: Boaz Shaanan <bshaanan(a)bgu.ac.il> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Problem with DelPhi in chimera (labe boye) (Boaz Shaanan) - correction Message-ID: <81ea8ecae3d04575b9c13ac2142612bf(a)bgu.ac.il> Content-Type: text/plain; charset="windows-1255" In my previous message I meant of course linux Delphi v.6. Sorry. Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Tuesday, December 24, 2019 7:10 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 200, Issue 20 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fplato.cgl.… or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (labe boye) (Boaz Shaanan) ---------------------------------------------------------------------- Message: 1 Date: Tue, 24 Dec 2019 17:09:46 +0000 From: Boaz Shaanan <bshaanan(a)bgu.ac.il> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Problem with DelPhi in chimera (labe boye) Message-ID: <a2abfa7a83394a56b27584878c181426(a)bgu.ac.il> Content-Type: text/plain; charset="windows-1255" Hi, The Chimera v.6 that I used was the linux version NOT windows. The answer you got from the Delphi people sounds familiar to me which is why I switched to APBS interface on Chimera (works on both Windows and linux). The .dx file produced by APBS is read and contoured nicely by Chimera. If you need to ionize the structure, there is a Windows PDB2PQR executable as mentioned by Elaine (I understand that you're using Windows). Cheers, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Tuesday, December 24, 2019 6:34 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 200, Issue 19 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fplato.cgl.… or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (Elaine Meng) 2. Re: Chimera-users Digest, Vol 200, Issue 18 (Boaz Shaanan) 3. Re: Problem with DelPhi in chimera (Elaine Meng) ---------------------------------------------------------------------- Message: 1 Date: Mon, 23 Dec 2019 12:55:29 -0800 From: Elaine Meng <meng(a)cgl.ucsf.edu> To: "sintaspirulina(a)gmail.com" <sintaspirulina(a)gmail.com> Cc: Chimera BB <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Problem with DelPhi in chimera Message-ID: <B59A5D0E-CA80-4151-9CD6-11B33435CA4A(a)cgl.ucsf.edu> Content-Type: text/plain; charset=utf-8 We saw your Chimera bug report. However, the file you attached was not the ?.phi? file (electrostatic potential map) output from DelPhi. It was just the text output from the DelPhi program. If DelPhi runs successfully on your structure, it will create a separate file, with name ending in .phi, that is the electrostatic potential map. If by ?cube? you mean Gaussian cube grid, Chimera does read that format. <https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.rbvi.u…> However, this format is handled simply as a map that is not necessarily electrostatic potential, so it would require more steps in Chimera to get the coloring you want. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco On Dec 23, 2019, at 10:01 AM, sintaspirulina(a)gmail.com wrote: OK, I tried all the three academic versions of DelPhi for windows; and none is working for me. I contacted the DelPhi supporters and SUGGESTED to use CUBE output format which isn't possible in Chimera. In the mean time, the two Chimera versions I installed read 3eeb.phi file from the tutorial. I will report the problem. regards, Sintayehu M. Shenkutie, Dr. rer. nat. Assistant Professor of Biochemistry. Department of Chemistry Hawassa University Ethiopia Mobile: +251902432925 Email: dr.sintayehu(a)hu.edu.et Sintayehu.M.Shenkutie(a)bot3.bio.uni-giessen.de On Monday, December 23, 2019, 08:30:26 PM GMT+3, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: It should be any DelPhi version that you get from the academic website, which was a link in this page I sent earlier: The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: <https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.rbvi.u…> ?specifically this is their academic website <https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcompbio.cl…> I don?t remember what version I used several years ago to make 3eebB.phi, but as far as I know the format didn?t change. It is possible it changed and we didn?t know about it, but we would need example(s) of the files. If you believe you used the academic version of DelPhi but you get the error opening the phi file, you could try using Chimera menu Help? Report a Bug and attach your phi file so we could take a look at it. However, that does not guarantee it will be possible to fix. I hope this helps, Elaine On Dec 22, 2019, at 4:23 AM, labe boye <sintaspirulina(a)gmail.com> wrote: Hi Thank you for your reply. Could you please let me know which version of DelPhi academic version is compatible with Chimera? Which DelPhi version was used to generate the 3eeb.phi file in the tutorial? kindest regards, On Fri, Dec 20, 2019 at 11:16 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: Hi, Chimera is saying that your phi file output from Delphi contains inconsistent information, like maybe it got truncated. I do not know if it is possible to fix the phi file, sorry. The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: <https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.rbvi.u…> If you have some other version of DelPhi associated with a commercial package, maybe the format is different and Chimera does not know how to read it. Linked to the last section of this tutorial, there is an example DelPhi phi file (3eebB.phi) that Chimera can read: <https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.rbvi.u…> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco On Dec 20, 2019, at 10:33 AM, labe boye <sintaspirulina(a)gmail.com> wrote: Hi, I use windows, UCSF Chimera 1.14 and tried all versions of DelPhi for windows but I get the following error Error reading file default.phi, format delphi Record size > file size What is the solution? regards, -- Sintayehu M. Shenkutie, Dr. rer. nat. Assistant Professor of Biochemistry. Department of Chemistry Hawassa University Ethiopia Mobile: +251902432925 Email: dr.sintayehu(a)hu.edu.et Sintayehu.M.Shenkutie(a)bot3.bio.uni-giessen.de The bamboo that bends is stronger than the oak that resists _______________________________________________ Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu Manage subscription: https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fplato.cgl.… _______________________________________________ Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu Manage subscription: https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fplato.cgl.… ------------------------------ Message: 2 Date: Mon, 23 Dec 2019 21:21:35 +0000 From: Boaz Shaanan <bshaanan(a)bgu.ac.il> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Chimera-users Digest, Vol 200, Issue 18 Message-ID: <d539fbf953d74b6783b5dc0a632313d3(a)bgu.ac.il> Content-Type: text/plain; charset="windows-1255" Hi, I ran into this Chimera/Delphi problem a few months ago (and discussed it with the Chimera/Delphi people). The latest Delphi version that I tried (8.4) produced a cube format file which formally can be read and contoured in the Chimera volume viewer. I hated the way the electrostatic surface produced that way looked and abandoned it. Delphi v. 6 which I have (and which I think Elaine used 3 years ago) produced the good old .phi which is file properly displayed in Chimera . I think one can still get hold of V.6 from the Delphi distribution site. To avoid this mess I used the APBS interface of Chimera which worked fine and produced a nice, familiar style, looking electrostatic surface (see for example Fig. S10 in the supplementary of doi: 10.1093/nar/gkz604). Regards, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Monday, December 23, 2019 10:48 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 200, Issue 18 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fplato.cgl.… or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (Elaine Meng) 2. need your assistance (Asmi Mahmood) 3. Re: Problem with DelPhi in chimera (labe boye) 4. Re: Problem with DelPhi in chimera (Elaine Meng) 5. dock prep for many ligands (Elaine Meng) 6. Re: Problem with DelPhi in chimera (sintaspirulina(a)gmail.com) ---------------------------------------------------------------------- Message: 1 Date: Fri, 20 Dec 2019 12:16:20 -0800 From: Elaine Meng <meng(a)cgl.ucsf.edu> To: labe boye <sintaspirulina(a)gmail.com> Cc: chimera-users(a)cgl.ucsf.edu Subject: Re: [Chimera-users] Problem with DelPhi in chimera Message-ID: <1158BCF0-F94F-4B55-98DA-27166E19CEDC(a)cgl.ucsf.edu> Content-Type: text/plain; charset=us-ascii Hi, Chimera is saying that your phi file output from Delphi contains inconsistent information, like maybe it got truncated. I do not know if it is possible to fix the phi file, sorry. The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: <https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.rbvi.u…> If you have some other version of DelPhi associated with a commercial package, maybe the format is different and Chimera does not know how to read it. Linked to the last section of this tutorial, there is an example DelPhi phi file (3eebB.phi) that Chimera can read: <https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.rbvi.u…> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco On Dec 20, 2019, at 10:33 AM, labe boye <sintaspirulina(a)gmail.com> wrote: Hi, I use windows, UCSF Chimera 1.14 and tried all versions of DelPhi for windows but I get the following error Error reading file default.phi, format delphi Record size > file size What is the solution? regards, ------------------------------ Message: 2 Date: Sat, 21 Dec 2019 15:10:00 +0000 (UTC) From: Asmi Mahmood <asmi_mahmood(a)yahoo.com> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu>, "chimera-bugs(a)cgl.ucsf.edu" <chimera-bugs(a)cgl.ucsf.edu> Subject: [Chimera-users] need your assistance Message-ID: <844676351.2239559.1576941000519(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Hi Hope you are doing good. I need your assistance regarding chimera. I'm working on virtual docking and need to prepare more than 10k ligands (in a single file as SDF) for docking process. I need to know that if chimera desktop latest version can fulfill my need. If yes please give me a tutorial pdf or video. Regards Waiting for a quick response Asma Tariq

4 6

need your assistance
by Asmi Mahmood 30 Dec '19

30 Dec '19

Hi Hope you are doing good. I need your assistance regarding chimera. I'm working on virtual docking and need to prepare more than 10k ligands (in a single file as SDF) for docking process. I need to know that if chimera desktop latest version can fulfill my need. If yes please give me a tutorial pdf or video. Regards Waiting for a quick response Asma Tariq

3 4

Re: [Chimera-users] Problem with DelPhi in chimera
by Elaine Meng 24 Dec '19

24 Dec '19

Hello, That sounds like a problem with your DelPhi setup, or you didn’t wait long enough for the calculation to finish. Sometimes it takes several minutes. Instead of DelPhi, you could try using PDB2PQR and then (on the resulting pqr file) using APBS. Chimera has interfaces to both of these: <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/apbs/pdb2pqr.html> <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/apbs/apbs.html> …or you can use their web server directly, outside of Chimera: <http://nbcr-222.ucsd.edu/pdb2pqr_2.1.1/> <https://apbs-pdb2pqr.readthedocs.io/en/latest/downloads.html#web-servers> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Dec 23, 2019, at 9:45 PM, sintaspirulina(a)gmail.com wrote: > > FYI > I tried DelPhi for windows F95 v6 as suggested by Boaz S. but in my case the out put .phi is empty file not even truncated. > regards, > Sintayehu M. Shenkutie, Dr. rer. nat. > Assistant Professor of Biochemistry. > Department of Chemistry > Hawassa University > Ethiopia > Mobile: +251902432925 > Email: dr.sintayehu(a)hu.edu.et > Sintayehu.M.Shenkutie(a)bot3.bio.uni-giessen.de > > On Tuesday, December 24, 2019, 08:13:52 AM GMT+3, sintaspirulina(a)gmail.com <sintaspirulina(a)gmail.com> wrote: > > Hello again, > Thank you very much for your reply. > For the bug report, my bad I might have attached the wrong file. I repeated the same thing with the .phi file. The email from another user, that is probably helpful. I will see if I can get the old DelPhi version. > kindest regards, > > > On Tuesday, December 24, 2019, 12:27:54 AM GMT+3, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > > In case you didn’t see it, another user says this: > >> Begin forwarded message: >> >> From: Boaz Shaanan <bshaanan(a)bgu.ac.il> >> Subject: Re: [Chimera-users] Chimera-users Digest, Vol 200, Issue 18 >> Date: December 23, 2019 at 1:21:35 PM PST >> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu> >> >> Hi, >> >> I ran into this Chimera/Delphi problem a few months ago (and discussed it with the Chimera/Delphi people). The latest Delphi version that I tried (8.4) produced a cube format file which formally can be read and contoured in the Chimera volume viewer. I hated the way the electrostatic surface produced that way looked and abandoned it. Delphi v. 6 which I have (and which I think Elaine used 3 years ago) produced the good old .phi which is file properly displayed in Chimera . I think one can still get hold of V.6 from the Delphi distribution site. >> >> To avoid this mess I used the APBS interface of Chimera which worked fine and produced a nice, familiar style, looking electrostatic surface (see for example Fig. S10 in the supplementary of doi: 10.1093/nar/gkz604). >> >> Regards, >> Boaz >>

2 2

Re: [Chimera-users] Problem with DelPhi in chimera (labe boye) (Boaz Shaanan) - correction
by Boaz Shaanan 24 Dec '19

24 Dec '19

In my previous message I meant of course linux Delphi v.6. Sorry. Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Tuesday, December 24, 2019 7:10 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 200, Issue 20 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (labe boye) (Boaz Shaanan) ---------------------------------------------------------------------- Message: 1 Date: Tue, 24 Dec 2019 17:09:46 +0000 From: Boaz Shaanan <bshaanan(a)bgu.ac.il> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Problem with DelPhi in chimera (labe boye) Message-ID: <a2abfa7a83394a56b27584878c181426(a)bgu.ac.il> Content-Type: text/plain; charset="windows-1255" Hi, The Chimera v.6 that I used was the linux version NOT windows. The answer you got from the Delphi people sounds familiar to me which is why I switched to APBS interface on Chimera (works on both Windows and linux). The .dx file produced by APBS is read and contoured nicely by Chimera. If you need to ionize the structure, there is a Windows PDB2PQR executable as mentioned by Elaine (I understand that you're using Windows). Cheers, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Tuesday, December 24, 2019 6:34 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 200, Issue 19 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (Elaine Meng) 2. Re: Chimera-users Digest, Vol 200, Issue 18 (Boaz Shaanan) 3. Re: Problem with DelPhi in chimera (Elaine Meng) ---------------------------------------------------------------------- Message: 1 Date: Mon, 23 Dec 2019 12:55:29 -0800 From: Elaine Meng <meng(a)cgl.ucsf.edu> To: "sintaspirulina(a)gmail.com" <sintaspirulina(a)gmail.com> Cc: Chimera BB <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Problem with DelPhi in chimera Message-ID: <B59A5D0E-CA80-4151-9CD6-11B33435CA4A(a)cgl.ucsf.edu> Content-Type: text/plain; charset=utf-8 We saw your Chimera bug report. However, the file you attached was not the ?.phi? file (electrostatic potential map) output from DelPhi. It was just the text output from the DelPhi program. If DelPhi runs successfully on your structure, it will create a separate file, with name ending in .phi, that is the electrostatic potential map. If by ?cube? you mean Gaussian cube grid, Chimera does read that format. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#volume> However, this format is handled simply as a map that is not necessarily electrostatic potential, so it would require more steps in Chimera to get the coloring you want. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Dec 23, 2019, at 10:01 AM, sintaspirulina(a)gmail.com wrote: > > OK, > I tried all the three academic versions of DelPhi for windows; and none is working for me. I contacted the DelPhi supporters and SUGGESTED to use CUBE output format which isn't possible in Chimera. In the mean time, the two Chimera versions I installed read 3eeb.phi file from the tutorial. > I will report the problem. > regards, > > Sintayehu M. Shenkutie, Dr. rer. nat. > Assistant Professor of Biochemistry. > Department of Chemistry > Hawassa University > Ethiopia > Mobile: +251902432925 > Email: dr.sintayehu(a)hu.edu.et > Sintayehu.M.Shenkutie(a)bot3.bio.uni-giessen.de > > > > > On Monday, December 23, 2019, 08:30:26 PM GMT+3, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > > It should be any DelPhi version that you get from the academic website, which was a link in this page I sent earlier: > > > The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: > > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#esp> > > ?specifically this is their academic website <http://compbio.clemson.edu/delphi> > > I don?t remember what version I used several years ago to make 3eebB.phi, but as far as I know the format didn?t change. It is possible it changed and we didn?t know about it, but we would need example(s) of the files. > > If you believe you used the academic version of DelPhi but you get the error opening the phi file, you could try using Chimera menu Help? Report a Bug and attach your phi file so we could take a look at it. However, that does not guarantee it will be possible to fix. > > I hope this helps, > Elaine > > > On Dec 22, 2019, at 4:23 AM, labe boye <sintaspirulina(a)gmail.com> wrote: > > > > Hi > > Thank you for your reply. > > Could you please let me know which version of DelPhi academic version is compatible with Chimera? Which DelPhi version was used to generate the 3eeb.phi file in the tutorial? > > kindest regards, > > > > On Fri, Dec 20, 2019 at 11:16 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi, > > Chimera is saying that your phi file output from Delphi contains inconsistent information, like maybe it got truncated. I do not know if it is possible to fix the phi file, sorry. > > > > The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: > > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#esp> > > > > If you have some other version of DelPhi associated with a commercial package, maybe the format is different and Chimera does not know how to read it. > > > > Linked to the last section of this tutorial, there is an example DelPhi phi file (3eebB.phi) that Chimera can read: > > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/tutorials/surfprop.html> > > > > I hope this helps, > > Elaine > > ----- > > Elaine C. Meng, Ph.D. > > UCSF Chimera(X) team > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > > > > On Dec 20, 2019, at 10:33 AM, labe boye <sintaspirulina(a)gmail.com> wrote: > > > > > > Hi, > > > I use windows, UCSF Chimera 1.14 and tried all versions of DelPhi for windows but I get the following error > > > Error reading file default.phi, format delphi > > > Record size > file size > > > What is the solution? > > > regards, > > > > > > > > > > > -- > > Sintayehu M. Shenkutie, Dr. rer. nat. > > Assistant Professor of Biochemistry. > > Department of Chemistry > > Hawassa University > > Ethiopia > > Mobile: +251902432925 > > Email: dr.sintayehu(a)hu.edu.et > > Sintayehu.M.Shenkutie(a)bot3.bio.uni-giessen.de > > > > The bamboo that bends is stronger than the oak that resists > > > _______________________________________________ > > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > > Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users ------------------------------ Message: 2 Date: Mon, 23 Dec 2019 21:21:35 +0000 From: Boaz Shaanan <bshaanan(a)bgu.ac.il> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Chimera-users Digest, Vol 200, Issue 18 Message-ID: <d539fbf953d74b6783b5dc0a632313d3(a)bgu.ac.il> Content-Type: text/plain; charset="windows-1255" Hi, I ran into this Chimera/Delphi problem a few months ago (and discussed it with the Chimera/Delphi people). The latest Delphi version that I tried (8.4) produced a cube format file which formally can be read and contoured in the Chimera volume viewer. I hated the way the electrostatic surface produced that way looked and abandoned it. Delphi v. 6 which I have (and which I think Elaine used 3 years ago) produced the good old .phi which is file properly displayed in Chimera . I think one can still get hold of V.6 from the Delphi distribution site. To avoid this mess I used the APBS interface of Chimera which worked fine and produced a nice, familiar style, looking electrostatic surface (see for example Fig. S10 in the supplementary of doi: 10.1093/nar/gkz604). Regards, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Monday, December 23, 2019 10:48 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 200, Issue 18 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (Elaine Meng) 2. need your assistance (Asmi Mahmood) 3. Re: Problem with DelPhi in chimera (labe boye) 4. Re: Problem with DelPhi in chimera (Elaine Meng) 5. dock prep for many ligands (Elaine Meng) 6. Re: Problem with DelPhi in chimera (sintaspirulina(a)gmail.com) ---------------------------------------------------------------------- Message: 1 Date: Fri, 20 Dec 2019 12:16:20 -0800 From: Elaine Meng <meng(a)cgl.ucsf.edu> To: labe boye <sintaspirulina(a)gmail.com> Cc: chimera-users(a)cgl.ucsf.edu Subject: Re: [Chimera-users] Problem with DelPhi in chimera Message-ID: <1158BCF0-F94F-4B55-98DA-27166E19CEDC(a)cgl.ucsf.edu> Content-Type: text/plain; charset=us-ascii Hi, Chimera is saying that your phi file output from Delphi contains inconsistent information, like maybe it got truncated. I do not know if it is possible to fix the phi file, sorry. The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#esp> If you have some other version of DelPhi associated with a commercial package, maybe the format is different and Chimera does not know how to read it. Linked to the last section of this tutorial, there is an example DelPhi phi file (3eebB.phi) that Chimera can read: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/tutorials/surfprop.html> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Dec 20, 2019, at 10:33 AM, labe boye <sintaspirulina(a)gmail.com> wrote: > > Hi, > I use windows, UCSF Chimera 1.14 and tried all versions of DelPhi for windows but I get the following error > Error reading file default.phi, format delphi > Record size > file size > What is the solution? > regards, > ------------------------------ Message: 2 Date: Sat, 21 Dec 2019 15:10:00 +0000 (UTC) From: Asmi Mahmood <asmi_mahmood(a)yahoo.com> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu>, "chimera-bugs(a)cgl.ucsf.edu" <chimera-bugs(a)cgl.ucsf.edu> Subject: [Chimera-users] need your assistance Message-ID: <844676351.2239559.1576941000519(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Hi Hope you are doing good. I need your assistance regarding chimera. I'm working on virtual docking and need to prepare more than 10k ligands (in a single file as SDF) for docking process. I need to know that if chimera desktop latest version can fulfill my need. If yes please give me a tutorial pdf or video. Regards Waiting for a quick response Asma Tariq

1 0

Re: [Chimera-users] Problem with DelPhi in chimera (labe boye)
by Boaz Shaanan 24 Dec '19

24 Dec '19

Hi, The Chimera v.6 that I used was the linux version NOT windows. The answer you got from the Delphi people sounds familiar to me which is why I switched to APBS interface on Chimera (works on both Windows and linux). The .dx file produced by APBS is read and contoured nicely by Chimera. If you need to ionize the structure, there is a Windows PDB2PQR executable as mentioned by Elaine (I understand that you're using Windows). Cheers, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Tuesday, December 24, 2019 6:34 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 200, Issue 19 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (Elaine Meng) 2. Re: Chimera-users Digest, Vol 200, Issue 18 (Boaz Shaanan) 3. Re: Problem with DelPhi in chimera (Elaine Meng) ---------------------------------------------------------------------- Message: 1 Date: Mon, 23 Dec 2019 12:55:29 -0800 From: Elaine Meng <meng(a)cgl.ucsf.edu> To: "sintaspirulina(a)gmail.com" <sintaspirulina(a)gmail.com> Cc: Chimera BB <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Problem with DelPhi in chimera Message-ID: <B59A5D0E-CA80-4151-9CD6-11B33435CA4A(a)cgl.ucsf.edu> Content-Type: text/plain; charset=utf-8 We saw your Chimera bug report. However, the file you attached was not the ?.phi? file (electrostatic potential map) output from DelPhi. It was just the text output from the DelPhi program. If DelPhi runs successfully on your structure, it will create a separate file, with name ending in .phi, that is the electrostatic potential map. If by ?cube? you mean Gaussian cube grid, Chimera does read that format. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#volume> However, this format is handled simply as a map that is not necessarily electrostatic potential, so it would require more steps in Chimera to get the coloring you want. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Dec 23, 2019, at 10:01 AM, sintaspirulina(a)gmail.com wrote: > > OK, > I tried all the three academic versions of DelPhi for windows; and none is working for me. I contacted the DelPhi supporters and SUGGESTED to use CUBE output format which isn't possible in Chimera. In the mean time, the two Chimera versions I installed read 3eeb.phi file from the tutorial. > I will report the problem. > regards, > > Sintayehu M. Shenkutie, Dr. rer. nat. > Assistant Professor of Biochemistry. > Department of Chemistry > Hawassa University > Ethiopia > Mobile: +251902432925 > Email: dr.sintayehu(a)hu.edu.et > Sintayehu.M.Shenkutie(a)bot3.bio.uni-giessen.de > > > > > On Monday, December 23, 2019, 08:30:26 PM GMT+3, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > > It should be any DelPhi version that you get from the academic website, which was a link in this page I sent earlier: > > > The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: > > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#esp> > > ?specifically this is their academic website <http://compbio.clemson.edu/delphi> > > I don?t remember what version I used several years ago to make 3eebB.phi, but as far as I know the format didn?t change. It is possible it changed and we didn?t know about it, but we would need example(s) of the files. > > If you believe you used the academic version of DelPhi but you get the error opening the phi file, you could try using Chimera menu Help? Report a Bug and attach your phi file so we could take a look at it. However, that does not guarantee it will be possible to fix. > > I hope this helps, > Elaine > > > On Dec 22, 2019, at 4:23 AM, labe boye <sintaspirulina(a)gmail.com> wrote: > > > > Hi > > Thank you for your reply. > > Could you please let me know which version of DelPhi academic version is compatible with Chimera? Which DelPhi version was used to generate the 3eeb.phi file in the tutorial? > > kindest regards, > > > > On Fri, Dec 20, 2019 at 11:16 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi, > > Chimera is saying that your phi file output from Delphi contains inconsistent information, like maybe it got truncated. I do not know if it is possible to fix the phi file, sorry. > > > > The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: > > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#esp> > > > > If you have some other version of DelPhi associated with a commercial package, maybe the format is different and Chimera does not know how to read it. > > > > Linked to the last section of this tutorial, there is an example DelPhi phi file (3eebB.phi) that Chimera can read: > > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/tutorials/surfprop.html> > > > > I hope this helps, > > Elaine > > ----- > > Elaine C. Meng, Ph.D. > > UCSF Chimera(X) team > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > > > > On Dec 20, 2019, at 10:33 AM, labe boye <sintaspirulina(a)gmail.com> wrote: > > > > > > Hi, > > > I use windows, UCSF Chimera 1.14 and tried all versions of DelPhi for windows but I get the following error > > > Error reading file default.phi, format delphi > > > Record size > file size > > > What is the solution? > > > regards, > > > > > > > > > > > -- > > Sintayehu M. Shenkutie, Dr. rer. nat. > > Assistant Professor of Biochemistry. > > Department of Chemistry > > Hawassa University > > Ethiopia > > Mobile: +251902432925 > > Email: dr.sintayehu(a)hu.edu.et > > Sintayehu.M.Shenkutie(a)bot3.bio.uni-giessen.de > > > > The bamboo that bends is stronger than the oak that resists > > > _______________________________________________ > > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > > Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users ------------------------------ Message: 2 Date: Mon, 23 Dec 2019 21:21:35 +0000 From: Boaz Shaanan <bshaanan(a)bgu.ac.il> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Chimera-users Digest, Vol 200, Issue 18 Message-ID: <d539fbf953d74b6783b5dc0a632313d3(a)bgu.ac.il> Content-Type: text/plain; charset="windows-1255" Hi, I ran into this Chimera/Delphi problem a few months ago (and discussed it with the Chimera/Delphi people). The latest Delphi version that I tried (8.4) produced a cube format file which formally can be read and contoured in the Chimera volume viewer. I hated the way the electrostatic surface produced that way looked and abandoned it. Delphi v. 6 which I have (and which I think Elaine used 3 years ago) produced the good old .phi which is file properly displayed in Chimera . I think one can still get hold of V.6 from the Delphi distribution site. To avoid this mess I used the APBS interface of Chimera which worked fine and produced a nice, familiar style, looking electrostatic surface (see for example Fig. S10 in the supplementary of doi: 10.1093/nar/gkz604). Regards, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Monday, December 23, 2019 10:48 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 200, Issue 18 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (Elaine Meng) 2. need your assistance (Asmi Mahmood) 3. Re: Problem with DelPhi in chimera (labe boye) 4. Re: Problem with DelPhi in chimera (Elaine Meng) 5. dock prep for many ligands (Elaine Meng) 6. Re: Problem with DelPhi in chimera (sintaspirulina(a)gmail.com) ---------------------------------------------------------------------- Message: 1 Date: Fri, 20 Dec 2019 12:16:20 -0800 From: Elaine Meng <meng(a)cgl.ucsf.edu> To: labe boye <sintaspirulina(a)gmail.com> Cc: chimera-users(a)cgl.ucsf.edu Subject: Re: [Chimera-users] Problem with DelPhi in chimera Message-ID: <1158BCF0-F94F-4B55-98DA-27166E19CEDC(a)cgl.ucsf.edu> Content-Type: text/plain; charset=us-ascii Hi, Chimera is saying that your phi file output from Delphi contains inconsistent information, like maybe it got truncated. I do not know if it is possible to fix the phi file, sorry. The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#esp> If you have some other version of DelPhi associated with a commercial package, maybe the format is different and Chimera does not know how to read it. Linked to the last section of this tutorial, there is an example DelPhi phi file (3eebB.phi) that Chimera can read: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/tutorials/surfprop.html> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Dec 20, 2019, at 10:33 AM, labe boye <sintaspirulina(a)gmail.com> wrote: > > Hi, > I use windows, UCSF Chimera 1.14 and tried all versions of DelPhi for windows but I get the following error > Error reading file default.phi, format delphi > Record size > file size > What is the solution? > regards, > ------------------------------ Message: 2 Date: Sat, 21 Dec 2019 15:10:00 +0000 (UTC) From: Asmi Mahmood <asmi_mahmood(a)yahoo.com> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu>, "chimera-bugs(a)cgl.ucsf.edu" <chimera-bugs(a)cgl.ucsf.edu> Subject: [Chimera-users] need your assistance Message-ID: <844676351.2239559.1576941000519(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Hi Hope you are doing good. I need your assistance regarding chimera. I'm working on virtual docking and need to prepare more than 10k ligands (in a single file as SDF) for docking process. I need to know that if chimera desktop latest version can fulfill my need. If yes please give me a tutorial pdf or video. Regards Waiting for a quick response Asma Tariq

1 0

Re: [Chimera-users] Chimera-users Digest, Vol 200, Issue 18
by Boaz Shaanan 23 Dec '19

23 Dec '19

Hi, I ran into this Chimera/Delphi problem a few months ago (and discussed it with the Chimera/Delphi people). The latest Delphi version that I tried (8.4) produced a cube format file which formally can be read and contoured in the Chimera volume viewer. I hated the way the electrostatic surface produced that way looked and abandoned it. Delphi v. 6 which I have (and which I think Elaine used 3 years ago) produced the good old .phi which is file properly displayed in Chimera . I think one can still get hold of V.6 from the Delphi distribution site. To avoid this mess I used the APBS interface of Chimera which worked fine and produced a nice, familiar style, looking electrostatic surface (see for example Fig. S10 in the supplementary of doi: 10.1093/nar/gkz604). Regards, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Monday, December 23, 2019 10:48 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 200, Issue 18 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Problem with DelPhi in chimera (Elaine Meng) 2. need your assistance (Asmi Mahmood) 3. Re: Problem with DelPhi in chimera (labe boye) 4. Re: Problem with DelPhi in chimera (Elaine Meng) 5. dock prep for many ligands (Elaine Meng) 6. Re: Problem with DelPhi in chimera (sintaspirulina(a)gmail.com) ---------------------------------------------------------------------- Message: 1 Date: Fri, 20 Dec 2019 12:16:20 -0800 From: Elaine Meng <meng(a)cgl.ucsf.edu> To: labe boye <sintaspirulina(a)gmail.com> Cc: chimera-users(a)cgl.ucsf.edu Subject: Re: [Chimera-users] Problem with DelPhi in chimera Message-ID: <1158BCF0-F94F-4B55-98DA-27166E19CEDC(a)cgl.ucsf.edu> Content-Type: text/plain; charset=us-ascii Hi, Chimera is saying that your phi file output from Delphi contains inconsistent information, like maybe it got truncated. I do not know if it is possible to fix the phi file, sorry. The DelPhi files that Chimera can read are from the academic version of DelPhi, as mentioned here: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#esp> If you have some other version of DelPhi associated with a commercial package, maybe the format is different and Chimera does not know how to read it. Linked to the last section of this tutorial, there is an example DelPhi phi file (3eebB.phi) that Chimera can read: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/tutorials/surfprop.html> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Dec 20, 2019, at 10:33 AM, labe boye <sintaspirulina(a)gmail.com> wrote: > > Hi, > I use windows, UCSF Chimera 1.14 and tried all versions of DelPhi for windows but I get the following error > Error reading file default.phi, format delphi > Record size > file size > What is the solution? > regards, > ------------------------------ Message: 2 Date: Sat, 21 Dec 2019 15:10:00 +0000 (UTC) From: Asmi Mahmood <asmi_mahmood(a)yahoo.com> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu>, "chimera-bugs(a)cgl.ucsf.edu" <chimera-bugs(a)cgl.ucsf.edu> Subject: [Chimera-users] need your assistance Message-ID: <844676351.2239559.1576941000519(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Hi Hope you are doing good. I need your assistance regarding chimera. I'm working on virtual docking and need to prepare more than 10k ligands (in a single file as SDF) for docking process. I need to know that if chimera desktop latest version can fulfill my need. If yes please give me a tutorial pdf or video. Regards Waiting for a quick response Asma Tariq

1 0