July 2020 - Chimera-users - RBVI Mailing Lists

Chimera interface to Modeller
by Vonderviszt Ferenc 03 Sep '24

03 Sep '24

Hello, I have been using the Chimera interface to Modeller via a web service. This service has been down for a few days. It always stops with the following error message: Service 'opal:Modeller9v8Service' is unavailable What should I do? Please help me. Thanks, Feri

4 4

(no subject)
by Thirumurugan Prakasam 29 Oct '21

29 Oct '21

Hi, I am trying to make metal coordination bond as a dotted line and also I need to make electron clouds around the atoms as in the picture below (Please provide me short guidelines on how to make nice cartoon). Please help me sort this two issues. Looking forward to hearing from you, Many thanks, Thiru [image: image.png] -- Thirumurugan Prakasam, Research Scientist, New York University Abu Dhabi, Experimental Research Building Building C1, Saadiyat Island Abu Dhabi, UAE Phone no: +971-561976358

3 7

Fitting structure in rescaled map
by Ahmad Khalifa 23 Sep '20

23 Sep '20

Hello, How to fit an atomic model after downscaling my map (map shrinks)? Are atomic models built to scale?! Regards.

2 3

Fw: Open MTZ file
by Williams, Joanne 20 Aug '20

20 Aug '20

Hello! Can you help with the inquiry below? thanks, Jo ________________________________ From: Sharyn Endow, Ph.D. <sharyn.endow(a)duke.edu> Sent: Thursday, February 22, 2018 5:01 AM To: chimera(a)cgl.ucsf.edu Subject: Open MTZ file Is it possible to open an .mtz file in Chimera? ~~~~~~~~~~~~~~~~~~~~~~~~~~ Sharyn A. Endow, PhD Professor of Cell Biology, DUMC Professor of NBD, Duke-NUS PO Box 3709 450 Sands Bldg/Research Drive Durham, NC 27710 USA T 919 684-4311 F 919 681-9929 ~~~~~~~~~~~~~~~~~~~~~~~~~~~

5 6

Scripting Question
by Helmick, Harrison Dale Brent 03 Aug '20

03 Aug '20

To the Chimera Team, Hello, my name is Harrison Helmick, and I am a PhD student in Purdue University's department of food science. I hope that you all are doing well. I am interested in developing more relationships between bioinformatic models and end use properties of foods, helping us understand and predict characteristics like emulsification, gelling, denaturation, etc. I have been using Chimera to run molecular dynamic simulations, as well as analyze the protein structures and compare those to experimental properties. I'd like to see if there are predictable functional differences based on intermediate steps of denaturation of common seed storage proteins used in food. I have found Chimera to be super interesting and helpful in terms of my learning so far. One of the characteristics I'd like to quantify is the change in secondary structure over the course of denaturation. I would like to have a script that returns the number of residues that are identified as the basic secondary structures so that I can graph the relative proportion of these structures of the course of the simulation. I'd also like to see which helices and strands are being degraded first, and I will compare that to their relative surface accessibility. The way I have gone about this is to use the Chimera command per frame scripts KSDSSP, sel hex, and writesel to attempt to generate files for each frame. With a short python code, we could loop over the files to see which residue numbers disappear first and the progression of the destruction of helices, strands, etc. I haven't been able to get the dynamic file writing to work though, so I always write over the original file instead of saving it as a new one. While I could probably figure out the dynamic file writing, this seems inefficient, and I was wondering if you all had a better script this process. Thank you, -- Harrison Helmick Graduate Research Assistant, Ross Fellowship Kokini Lab, Purdue University Philip E. Nelson Hall of Food Science 745 Agriculture Mall Dr. West Lafayette, IN 47907-2009

3 5

Private lesson
by Sylvia Lee-Huang 31 Jul '20

31 Jul '20

I would like to inquire if you offer private lessons on Chimera X and /or Chimera. If so, what is your rate? Specifically, I would like to learn protein-protein docking using your system. Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

2 1

Re: [Chimera-users] Where is the 2D Labels gui?
by Elaine Meng 31 Jul '20

31 Jul '20

> On Jul 31, 2020, at 4:58 AM, Chin-Bow, Stephen <stephen.chin-bow(a)yale.edu> wrote: > > Hi Elaine, > I just searched for: > > chimera 2D labels +gui > > but I did not find it. > Is it possible that the 2D Labels GUI was added for ChimeraX users? > Many thanks! > Stephen Hi Stephen, Chimera's 2D Labels tool is in the menu under Tools... Utilities, and also under Tools... Depiction. In general every command manual page also has a crossreference link to its tool, so you could just look at the "2dlabels" command manual page to find out about the tool. We generally just call the graphical interface dialogs "tools" so you wouldn't see the jargon "gui" very often in the documentation or find it in a search. If you just searched for "2d labels" you would find it. <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/2dlabels/2dlabels…> The 2D Labels tool is also mentioned in the "tips on preparing images" and used in many of the image-making tutorials. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/print.html#tips> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/tutorials/bfactor.html> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/tutorials/convergent.html> Another way to find out about the tool is to look at the Tools index in the User Guide. Each tool's individual manual page says what tool category it is in (which is the submenu under Tools in which it appears). <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/framecontrib.html> <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/2dlabels/2dlabels…> ChimeraX does not have a 2D Labels GUI (tool dialog) yet, only a 2dlabels command. We changed the syntax of this command between the two programs, to simplify/improve it in ChimeraX. Regarding your other message, we had envisioned new users finding out about Chimera features in these ways: (1) tutorials: numerous in the User Guide and additional ones on our website (2) using menu Help... Search Documentation to search for terms of interest (3) browsing the User Guide (included with download, menu Help... User's Guidef), scanning through tools index, commands index, basic functions outline for topics of interest (e.g. "tips on preparing images") and then following the links to read more details. (4) website feature highlights, image gallery, and animation gallery This does not address learning the programming (python) side of things. Chimera includes a Programmers Guide, but information for programmers is much less detailed than for users. <http://www.rbvi.ucsf.edu/chimera/docs/ProgrammersGuide/index.html> ChimeraX has much more emphasis than Chimera on supporting programmers (APIs, programmer documentation, ...), as well as a Toolshed online repository for plugins (similar to the Cytoscape App store). I hope this clarifies things. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Is there a way to determine the "screen" window coordinates (x, y) of an "atom-spec"
by Chin-Bow, Stephen 30 Jul '20

30 Jul '20

Hello, It has been only a few weeks since I first started learning Chimera 1.14 (build 42094) on a Linux64 system with X11. I hope my experiences will help you improve both Chimera and ChimeraX. Earlier today, I reported a situation which results in an unexpected handling of a "divide by zero" bug. I am using the experience to also learn some Python. I am sure there are better ways, but I edited your playmorph.py code to record an animation with a morphing sequence played in reverse. I admit that I still do not understand the different coordinate systems used in Chimera. I have a question which can simply be answered using a ruler, but I am hoping there is another more elegant solution. "2D Labels" arrow ends are specified as a percentage of the screen width and screen height (range 0.0 to 1.0). I would like to draw an arrow whose end (x,y) is specified with precision. After I can specify the windowsize Is there a way to request the "window-screen" coordinates of a specific atom-spec? This is useful, because if I have set the windowsize then I can simply divide the coordinates by the window dimensions to get the desired end for the arrow. Many thanks, Stephen

3 4

ViewDock problem
by Krivic, Denis 30 Jul '20

30 Jul '20

Hello, Does anybody know why the viewdock calculates Hbonds, but doesn't want to show them (in some cases-picture, not always)? Kind regards, Denis

2 1

The 2D labels keeps on moving away. Inb
by Shinjini Ghosh 29 Jul '20

29 Jul '20

Whenever I am trying to label the structure with 2D labels and after that when I am trying to save it as a POV ray image, the labelling keeps on moving away from the original position. What should I do to keep the labelling in the original place? I have attached the normal jpeg picture and the POV ray picture saved as PNG. -- Shinjini Ghosh. Student of Master of Science, Biophysics and Molecular Biology' Rajabazar Science College, University of Calcutta. [image: Mailtrack] <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=sig…> Sender notified by Mailtrack <https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=sig…> 07/29/20, 10:19:50 AM

2 1