April 2022 - Chimera-users - RBVI Mailing Lists

Chimera interface to Modeller
by Vonderviszt Ferenc 03 Sep '24

03 Sep '24

Hello, I have been using the Chimera interface to Modeller via a web service. This service has been down for a few days. It always stops with the following error message: Service 'opal:Modeller9v8Service' is unavailable What should I do? Please help me. Thanks, Feri

4 4

Question about save images
by Chang, Jufang 29 Apr '24

29 Apr '24

Hi, there, I used Chimera for a very short period of time. When I just started using Chimera I was able to save image by going to "file" and "save image" to save the image on the display window. For some reason, this stopped working. Now, after I did the same thing, the image I saved has complete blackness (attached). I wonder whether I might get be able to get help from you. I also tried using command line to save image. The result is the same. The exact procedure I used are: Go to "Presets", choose "publication 1" , then go to "File" and "save image" I used window system. Thank you J ________________________________ The materials in this message are private and may contain Protected Healthcare Information or other information of a sensitive nature. If you are not the intended recipient, be advised that any unauthorized use, disclosure, copying or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this email in error, please immediately notify the sender via telephone or return mail.

3 4

Error in using the "align chain sequences" tool in chimera
by Chara Spanou 02 May '22

02 May '22

Dear all, After performing the structure comparison of 2 structures using the "MatchMaker" tool of the chimera software,I need to run an alignment of the structure sequences using the "align chain sequences" tool of the chimera. Unfortunately, I am getting the following error message in the reply log that persists for weeks: Traceback from web service request (connection setup):Traceback (most recent call last): File "C:\Program Files\Chimera 1.12\share\WebServices\opal_client.py", line 11, in __init__ self._setup(serviceName, opalURL, sessionData) File "C:\Program Files\Chimera 1.12\share\WebServices\opal_client.py", line 50, in _setup self.sudsClient = Client(self.serviceURL + "?wsdl", **kw) File "C:\Program Files\Chimera 1.12\bin\lib\site-packages\suds_jurko-0.6-py2.7.egg\suds\client.py", line 115, in __init__ self.wsdl = reader.open(url) File "C:\Program Files\Chimera 1.12\bin\lib\site-packages\suds_jurko-0.6-py2.7.egg\suds\reader.py", line 150, in open d = self.fn(url, self.options) File "C:\Program Files\Chimera 1.12\bin\lib\site-packages\suds_jurko-0.6-py2.7.egg\suds\wsdl.py", line 136, in __init__ d = reader.open(url) File "C:\Program Files\Chimera 1.12\bin\lib\site-packages\suds_jurko-0.6-py2.7.egg\suds\reader.py", line 74, in open d = self.download(url) File "C:\Program Files\Chimera 1.12\bin\lib\site-packages\suds_jurko-0.6-py2.7.egg\suds\reader.py", line 92, in download fp = self.options.transport.open(Request(url)) File "C:\Program Files\Chimera 1.12\bin\lib\site-packages\suds_jurko-0.6-py2.7.egg\suds\transport\https.py", line 62, in open return HttpTransport.open(self, request) File "C:\Program Files\Chimera 1.12\bin\lib\site-packages\suds_jurko-0.6-py2.7.egg\suds\transport\http.py", line 67, in open return self.u2open(u2request) File "C:\Program Files\Chimera 1.12\bin\lib\site-packages\suds_jurko-0.6-py2.7.egg\suds\transport\http.py", line 132, in u2open return url.open(u2request, timeout=tm) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 437, in open response = meth(req, response) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 550, in http_response 'http', request, response, code, msg, hdrs) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 469, in error result = self._call_chain(*args) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 409, in _call_chain result = func(*args) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 656, in http_error_302 return self.parent.open(new, timeout=req.timeout) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 431, in open response = self._open(req, data) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 449, in _open '_open', req) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 409, in _call_chain result = func(*args) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 1240, in https_open context=self._context) File "C:\Program Files\Chimera 1.12\bin\lib\urllib2.py", line 1197, in do_open raise URLError(err)URLError: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:590)> Typically, if you get a TypeError, it's a problem on the remote serverand it should be fixed shortly. If you get a different error orget TypeError consistently for more than a day, please report theproblem using the Report a Bug... entry in the Help menu. Pleaseinclude the traceback printed above as part of the problem description.Traceback from web application request:Traceback (most recent call last): File "C:\Program Files\Chimera 1.12\share\WebServices\appWebService.py", line 48, in _initApp self.backend = Backend(service, url) File "C:\Program Files\Chimera 1.12\share\WebServices\opal_client.py", line 21, in __init__ raise NonChimeraError("Web service appears "NonChimeraError: Web service appears to be down. See Reply Log for more details.Service 'opal:ClustalOmegaService' is unavailable. See Reply Log for more details. Can you please help? Thanks a lot for your time,Chara

2 1

Questions in ChimeraX comparing with Chimera
by Long Gui 27 Apr '22

27 Apr '22

Dear Chimera users, I have been recently transferring to ChimeraX from the conventional Chimera and I am currently struggling with two features existing in Chimera but not in ChimeraX. 1. How could I combine two or several different ChimeraX files? I have been doing in Chimera as I was opening new chimera files by "Files...Open...", this is a window pop-up as the following and if I click "No", the new Chimera will be added to the cold Chimera as the old one was not closed. However, when I performed the similar operation in ChimeraX, there is no such window and the new ChimeraX would REPLACE the old one. I wonder if there is a way (probably using command to open? but I did not find the correct open options.) to open the new ChimeraX without closing the old one? [cid:23bcde4a-3b02-4fc4-9b5e-7b034cd22a9f] 1. I am also working with tomogram slices and cellular segmentation. Previously, in Chimera I can set this Transparency value to 0 and the Plane of the tomogram will be totally opaque. Now in ChimeraX I have used the command "transparency #2 0" (#2 is the tomogram files) but it still look quite different from my previous images in Chimera. Is there a way to set it up in ChimeraX so it could look similar as before? [cid:1e2eb72a-f2e5-4c83-b4e4-81b881b9dc67] Thanks again and I am very grateful if any advice or help could be provided. Long Gui, Ph.D. Postdoc Researcher, Nicastro Lab University of Texas Southwestern Medical Center Long.Gui(a)utsouthwestern.edu Tel: (214)-645-1561 ________________________________ UT Southwestern Medical Center The future of medicine, today.

2 1

Re: [Chimera-users] Help and guidance on using chimera
by Tom Goddard 27 Apr '22

27 Apr '22

Hi Tommy, Sure those things can be easily be done. I'd encourage you to use ChimeraX instead of the old Chimera program. Also best to email questions to the Chimera mailing list (chimera-users(a)cgl.ucsf.edu <mailto:chimera-users@cgl.ucsf.edu>) or ChimeraX mailing list (chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>). To delete a domain of a protein in ChimeraX that is say residues 151 to 375 of chain B delete /B:151-375 The command syntax would be different in Chimera. To add short linkers is more difficult and I will leave that question to Elaine to advise on the mailing list -- I am not the most knowledgable about how to do that. Tom > On Apr 26, 2022, at 4:45 PM, Tommy Tong <ttong(a)SDBRI.ORG> wrote: > > Dear Thomas, > Good afternoon. How are you? My name is Tommy from San Diego Biomedical Research Institute, CA. I am new to Chimera software and my level of usage has been at the basic level, eg selecting chains and to color label the specific region on the protein. > > May I ask if there is a way to selectively deleting a specific domain on a protein from a pdb file? I want to show graphically how the structure of the molecule will look like without the domain(s). In addition, is it possible to add short amino acid sequence, such as short linkers (eg GSGS) after a domain has been deleted from the protein structure? > > I am currently using UCSF Chimera version 1.16. > > Your help and advice are greatly appreciated. > Thank you for your time. > > Sincerely, > Tommy

3 3

Tomogram display
by Han, Shen 26 Apr '22

26 Apr '22

Hi Elaine, I want to ask some questions regarding displaying tomogram in ChimeraX. is it possible to reveal the density in the tomogram and trace the objects throughout the tomogram (also docking model in the density) in ChimeraX? Best wishes, Shen _________ Dr. Shen Han Postdoctoral Researcher Max Planck Institute for Multidisciplinary Sciences Department of Molecular Biology / Cramer Lab Am Faßberg 11, Göttingen 37077, Germany

2 1

Creating Bonds between Models
by Draven Houser 25 Apr '22

25 Apr '22

Hello, I am trying to build a structure in chimeraX that is a combination of several other known structures. To do this I need to be able to create bonds between different models in the software, but this doesn't seem to be possible for the moment. Can anyone suggest a workaround for this? Thanks! Best regards, Draven Houser

2 2

renumbering sequence with gap
by Haghighijoo, Zahra 25 Apr '22

25 Apr '22

Hi, I am editing a retrieved pdb from homology modeling that has two gaps, is there a way to insert the gaps and renumbering pdb? could you please help me ? Thank you, Zahra

2 2

Open Castp file in Chimera X
by Zhang, Bixia 21 Apr '22

21 Apr '22

Good afternoon, I am trying to open .poc file from CASTP server in Chimera X. And I found this chimeraX recipe https://rbvi.github.io/chimerax-recipes/castp/castp.html. However, when I used the command open<help:user/commands/open.html> read_castp.py, it said No such file/path: read_castp.py. I am working on a Linux unbuntu box and I don't know if this is making any difference. Could you please help with this issue? Thank you so much! Best, Bixia Read CASTP pockets file - ChimeraX Recipes<https://rbvi.github.io/chimerax-recipes/castp/castp.html> We for the ChimeraX atom specifier from chain identifier, residue number and atom name. For example, the above lines are for atoms /A:45@NH2, /B:27@O, /B:27@CG1 in ChimeraX syntax belonging to pockets 2, 1 and 1. rbvi.github.io

2 2

Command for measuring distance between centroids and to show dotted lines depicting the measurement
by Shubham Devesh Ramgoolam 21 Apr '22

21 Apr '22

Hi, I hope you are doing well. Is there a command in chimera that allows us to measure the distance between centroids and also to show dotted lines depicting the measurement? I used the command distance but no lines were shown for centroids. I am considering of using the coordinates of the centroids to place dummy atoms and then, use distance. However, I do not know if there is a command for placing dummy atoms in specified positions. Regards, Shubham Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

2 2