- Chimera-users - RBVI Mailing Lists

changing atomic radii in Chimera
by Elaine Meng 07 Dec '18

07 Dec '18

Hi Yu Guo, (including chimera-users in the message since it is a general question that other people might be interested in) You can change atomic radii as shown in sphere style with command “vdwdefine,” for example <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/vdwdefine.html> vdwdef -0.2 Ca (subtract from current size) vdwdef 1.0 Ca (set size to specific value) <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/vdwdefine.html> Maybe the single O atoms (those without bonds) are in stick style, however, so you would also need to change them to sphere style to see a difference. Since the molecule also has O you wouldn’t want to use “O” in the commands or you would change them all. Instead you could select them (Ctrl-click on atom) and then use “sel” in the command, e.g. repr sphere sel vdwdef 0.8 sel Actually, if you select the atom(s) another way is to use Selection Inspector (open by clicking green magnifying glass icon near the bottom right of the Chimera window) to change their display style and radius. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/inspection.html> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Dec 7, 2018, at 11:05 AM, Yu Guo <yg2(a)kth.se> wrote: > > The movie is fine now! I am now wondering how can I change the atomic radii in Chimera? I find Ca is much too big, and O is too small. See the attached movie.

1 0

mmcif, auth_xx information versus label_xx information
by moocow＠mindless.com 07 Dec '18

07 Dec '18

2 3

Re: [Chimera-users] Breaking down symmetry in Chimera
by Elaine Meng 06 Dec '18

06 Dec '18

Hi Anne, It is recommended to send Chimera questions to chimera-users(a)cgl.ucsf.edu (CC’d here) since others may be able to provide better answers or benefit from the exchange. My guess is that you might instead want to use symmetrical fitting, in which multiple copies of the atomic structure automatically maintain the specified symmetry. Symmetrical fitting is available in the “fitmap” command (not the GUI). See documentation <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/fitmap.html> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/fitmap.html#symmetric> and video tutorial <http://www.cgl.ucsf.edu/chimera/videodoc/SymFitDNAb/> The video is >6 minutes but worth watching, because like in that video you may need to first just fit one copy (not using symmetry), then use command “measure symmetry” to annotate the map with its symmetry, and then use command “sym” with “update true” to generate the symmetry copies of the atomic model. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Dec 6, 2018, at 10:32 AM, Jecrois, Anne <Anne.Jecrois(a)umassmed.edu> wrote: > > Dear Dr Meng, > I have a 5A cryoEM map with D3 symmetry, howeve I am having some problem with rigid body fitting since I don't know where one assymmetric unit starts or ends . I was wondering if there is way to break down the symmetry in chimera and extract 1/6 of the map and use that for fitting? > Thanks, > Anne Jecrois > PhD Candidate > UMass Medical School > Schiffer Lab/Royer Lab > 364 Plantation St, LRB 970L > Worcester MA 01605

3 3

Saving mrc EM-map
by Ibrahim M. Moustafa 06 Dec '18

06 Dec '18

Hi All, I'm trying to do the fitting of a model into EM (mrc map) for real-space-refine in phenix.First I read the map and clicked "center" in the Volume viewer. Then I saved the centered map, assuming that the header info will be updated in the saved map.I did the fitting and saved the model relative to the map. Reading the saved map and fitted model back looks OK. However, when I do the real-space-refine in Phenix, the CC-value during the run is really low (0.01) suggesting something is not properly done. I checked the header (using mrcfile) of the saved "centered" map and compared it to the original map and it is the same "0,0,0". Which means chimera did not update the header after centering. I'm not if there is a more proper way to do this! Any advice? Thank you for your help. Ibrahim Ibrahim M.Moustafa, Ph.D. Pennsylvania State University Biochemistry & Molecular Biology Dept. Millennium Science Complex University Park, PA16802 Tel (814)863 5940 Fax (814)865 7927

2 2

join models
by Stewart Morley 05 Dec '18

05 Dec '18

I cannot for the life of me get join models to work. 1. I have two structures. 2. The structures overlap. 3. I align them using matchmaker. 4. I delete the overlapped residue from one chain. 5. I select the appropriate C and N terminal residues 6. I try to use join models under Build structure 7. The apply box remains gray, no matter what residue or atom I select. What are common problems that cause join models to not work? Stewart Morley Brigham Young University

2 2

needing help for separating structures
by Yu Guo 30 Nov '18

30 Nov '18

Dear Sir/Madam, I am using Chimara to display large proteins. It is very nice. 6DHO(PDB structure, see attachment) is a very recent PSII structure consisting both S2 and S3(richer) states, which are highly overlapped in the raw data. I am urgently wondering how can I separate S3 out from the S2/S3 mixture by Chimera, especially the OEY? cluster and all its ligands? Thank you very much! Best wishes

4 12

UCSF import Error
by Cackett, Gwenny 28 Nov '18

28 Nov '18

Hi so I am running Linux Fedora 29 and since updating from Fedora 28 I have noticed my Chimera installation has stopped working - the icon does not open the program. And when I try to run from the command line I get the code below, which I gather is an issue with python importing a module: Traceback (most recent call last): File "/home/gwenny/.local/UCSF-Chimera64-1.12/share/__main__.py", line 69, in <module> value = chimeraInit.init(sys.argv) File "/home/gwenny/.local/UCSF-Chimera64-1.12/share/chimeraInit.py", line 628, in init import chimera File "/home/gwenny/.local/UCSF-Chimera64-1.12/share/chimera/__init__.py", line 2758, in <module> from SimpleSession import BEGIN_RESTORE_SESSION, END_RESTORE_SESSION File "/home/gwenny/.local/UCSF-Chimera64-1.12/share/SimpleSession/__init__.py", line 14, in <module> from save import saveSession, sessionID, noAutoRestore, autoRestorable, \ File "/home/gwenny/.local/UCSF-Chimera64-1.12/share/SimpleSession/save.py", line 13, in <module> from chimera import replyobj, selection, SessionPDBio, version File "/home/gwenny/.local/UCSF-Chimera64-1.12/share/chimera/replyobj.py", line 24, in <module> import Tkinter File "/home/gwenny/.local/UCSF-Chimera64-1.12/lib/python2.7/lib-tk/Tkinter.py", line 39, in <module> import _tkinter # If this fails your Python may not be configured for Tk ImportError: /usr/lib64/libfontconfig.so.1: undefined symbol: FT_Done_MM_Var Any help would be appreciated. Thanks and best wishes, Gwenny Cackett PhD Student RNAP Lab Institute of Structural & Molecular Biology University College London Gower Street, London, WC1E 6BT Phone: 020 7679 3899

2 1

Chimera Interface to Modeller
by Alisson Oliveira 28 Nov '18

28 Nov '18

Good night, I would like to construct a human DDX3 homology model in its closed conformation. However, I can not perform a proper alignment. I target the sequence Uniprot ID: O00571 and as models the PDB structures: 2I4I and 2DB3. However, the generated models present unsatisfactory results in terms of their quality. Attached is the image of the alignment. Can you help me??? [cid:3ddc1e68-24f3-40bf-8654-0fea58f849dc] [cid:e60c81ce-40de-4d0e-8e3a-a071a3aca2d0] Att. Alisson Felipe de Oliveira Farmacêutico CRF/RS: 18468 Mestrando em Ciências Farmacêuticas - UNIPAMPA

2 1

Matching of small molecules
by Cassandra Ceccopieri 28 Nov '18

28 Nov '18

Dear Sir/Madam, I would like to ask how to overcome the following problem that I faced trying to perform an alignment of small molecules. Writing in the command line section the following instruction: match #0 at c5,c4,n7,c8,c9,s10 #1 at c9,c8,n11,c12,c13,s14 I obtain, as output, an error message saying: Error in "#0 at c5,c4,n7,c8,c9,s10" must be an integer. I checked the tutorial but the instruction for the command line seemed in the same format as mine. Therefore, I would like to ask assistance to be able to perform my analysis. Kind Regards, C.

2 2

Using Per-Frame commands to recolor structures with attribute data is very slow
by David Slochower 27 Nov '18

27 Nov '18

Hi, As a follow up to this thread (http://plato.cgl.ucsf.edu/pipermail/chimera-users/2009-March/003712.html <http://plato.cgl.ucsf.edu/pipermail/chimera-users/2009-March/003712.html>) from 2009, I’d like to color a model by a custom attribute that changes from frame to frame. Using the workaround mentioned in that thread, we are able to use Per-Frame commands to load a new attribute file each frame, and then color the structure by the attribute, but this awfully slow (probably over 1 second per frame). Is there a way to cache the attribute data? Or a way to improve the performance of defining the attributes and re-coloring the structure? I know that I could use a Python script to load each coordinate frame with its associated attribute data, save images, and then stitch them together for a movie, but the current goal is for data exploration.

2 2