- Chimera-users - RBVI Mailing Lists

Error from running headless Chimera
by Zhe Wang 03 Aug '18

03 Aug '18

Hi, I am trying to using headless Chimera on RedHat linux server 7.3 to produce some images. But I end up with a segmentation fault. Does anyone have an idea how it comes to this? The headless chimera is from https://www.cgl.ucsf.edu/chimera/download.html (64-bit daily build). The test code was taken without changes from https://www.cgl.ucsf.edu/chimera/docs/ProgrammersGuide/basicPrimer.html. Any ideas will be appreciated. Best, Zhe PS: OSMesa 11.2.2 has been installed. Executing chimera_surface.py... Processing 6c7m.pdb Opening 6c7m.pdb... #0, chain A: kemp eliminase KE07 6c7m.pdb opened Center of rotation: 0.867528 -1.77985 11.157 /software/chimera_headless/bin/mscalc 1.400000 2.000000 1 MSMSLIB 1.3 started on ebi-cli-002.ebi.ac.uk Copyright M.F. Sanner (March 2000) Compilation flags Surface 6c7m.pdb, category main, probe radius 1.4, vertex density 2 12 connected surface components Total solvent excluded surface area = 10612 component areas = 10035.4, 126.971, 97.9893, 90.9594, 38.157, 36.4953, 34.1487, 33.7557, 32.681, 30.3253, 29.9037, 25.222 Total solvent accessible surface area = 11324.6 component areas = 11265.5, 25.8506, 19.8737, 10.3135, 0.685134, 0.778238, 0.522429, 0.365982, 0.314644, 0.177358, 0.178001, 0.00214196 Surface 6c7m.pdb, category main has 12 components /software/chimera_headless/bin/mscalc 1.400000 10.000000 1 MSMSLIB 1.3 started on ebi-cli-002.ebi.ac.uk Copyright M.F. Sanner (March 2000) Compilation flags RESTART FROM TRI: 1 radius of atom 5 goes from 1.880000 to 1.980000 radius of atom 6 goes from 1.880000 to 1.980000 radius of atom 1569 goes from 1.420000 to 1.520000 Partial mode /software/chimera_headless/bin/mscalc 1.400000 10.000000 0 MSMSLIB 1.3 started on ebi-cli-002.ebi.ac.uk Copyright M.F. Sanner (March 2000) Compilation flags RESTART FROM TRI: 1 radius of atom 5 goes from 1.880000 to 1.980000 radius of atom 6 goes from 1.880000 to 1.980000 radius of atom 1569 goes from 1.420000 to 1.520000 Partial mode Calculation of some surface components failed. A single component of the surface was calculated correctly - the failure occurred for disconnected additional components such as inside bubbles. If the desired surface is already shown, there is no need for concern. However, if it is not shown, see below for possible fixes. Surface calculation frequently fails for large, multi-chain structures. The calculation may be successful if the chains are treated individually, by using the "split" command before generating a surface. If splitting is not desired or the structure is already a single chain, changing molecular surface parameters in the Selection Inspector or (before surface creation) the New Surfaces category of Preferences may allow the calculation to succeed. More details are given at http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/surfprobs.html Surface 6c7m.pdb, category main, probe radius 1.4, vertex density 10 1 connected surface components Total solvent excluded surface area = 10036.7 Total solvent accessible surface area = 11266.5 Surface 6c7m.pdb, category main has 1 components Rendering high resolution image... Segmentation fault

3 3

Activation buttons (namely "All")
by Eric Pettersen 01 Aug '18

01 Aug '18

Hi all, The activation buttons below the command line have an “All” button that works much the same way as the “activate all” button in the Model Panel works: if you check it on, then all models are activated for motion; if you check it off then the previous activation states are restored. It has been suggested that the behavior could instead be that when checked off all models would be deactivated (making it easier in some cases to go from moving all models to moving just one). I’m trying to find out if any users make strong use of the current behavior of that button and wouldn’t want it changed. Conversely, I wouldn’t mind hearing people who would really like to see the behavior switched. Regardless of the outcome of the discussion, the behavior of the corresponding Model Panel button would remain the same for a couple of reasons: 1) when clicked, the text of the button changes to “restore activities” so there’s less chance of confusion, and 2) there’s a separate “deactivate” button. I will interpret lack of feedback as “sure, go ahead”. :-) —Eric Eric Pettersen UCSF Computer Graphics Lab

1 0

fixed: error saving scene with independent rotation
by Elaine Meng 31 Jul '18

31 Jul '18

Hi Yanhe, The bug you reported a few days ago has been fixed! I just confirmed that with the current daily build of Chimera, you can now save scenes with independent rotation and use them in the Animation tool and in scripts. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

2 3

Is there any tool to write some calculated attribute into a header format?
by Sergio Garay 31 Jul '18

31 Jul '18

Hi All! I would like to know: Is there any way or tool to write some calculated attribute into a header format? I want to see the same color values obtained for some a calculated attribute projected onto a sequence. I have read in the chimera list the inverse process: exporting a header from a sequence window to be read as an attribute. Thank you in advance. -- *Sergio GarayDr. en Ciencias BiológicasFacultad de Bioquimica y Cs. BiológicasUniversidad Nacional del LitoralSanta Fe - ArgentinaC.C. 242 - Ciudad Universitaria - C.P. S3000ZAAArgentinaPh. +54 (342) 4575-213Fax. +54 (342) 4575-221 *

3 3

Fwd: Inquiry for new/re-registration license key_Arifuzzaman Sarder
by Elaine Meng 31 Jul '18

31 Jul '18

> From: Sarder Arifuzzaman <arifpharmju(a)gmail.com> > Subject: Inquiry for new/re-registration license key_Arifuzzaman Sarder > Date: July 31, 2018 at 9:08:53 AM PDT > To: chimera-announce-owner(a)cgl.ucsf.edu > > Hi > Greetings. > This is Arifuzzamman Sarder. I am an earlier user of chimera software tool. Recently I installed the updated version (v1.13). However, I could not draw any chemical structure by inputting canonical smiles or any other chemical ID in this tool. Even it can not capture any chemical structure from PDB, unlikely it is giving us only protein structure. Could you please let me know how can I revive this tool, so that I can use it for molecular docking and chemical structure as well. > Thank you very much in advance. I am looking forward for your response please. > Sincerely > Arifuzzaman, Sarder > PhD research fellow > Chung-Ang University > Mobile: 010-2654-2606 > E-mail: arifpharmju(a)gmail.com <mailto:arifpharmju@gmail.com> > Web: https://sarderarifuzzaman.wixsite.com/arif <https://sarderarifuzzaman.wixsite.com/arif> HI Arifuzzamman Sarder, (forwarding to the proper address for asking Chimera questions: chimera-users(a)cgl.ucsf.edu ) There is no reason it should not work as before. Chimera does not use a license key. For example, in Chimera 1.13, command: open pubchem:12123 (- or -) open smiles:C1CCNC1 …shows a small molecule in sticks, and command: open 2gbp … shows PDB entry 2GBP; protein ribbons with ligand (glucose) as sticks and nearby sidechains as sticks. If you mean that your Chimera 1.13 is not showing small molecules, or not showing sticks, I only have two ideas: (A) graphics/rendering problem of your computer or (B) New Molecules preferences was set to show only ribbons. To check (B), show Preferences from the Favorites menu, then change to category: New Molecules and check that the settings are what you want, and then click Save. The behavior I described is for the default, “smart initial display” true. If you had it false, and also had “show atoms” false, it would not show atoms when you open a structure. If you feel it is a bug, you can use menu: Help… Report a Bug and describe in detail what you did and what the problem is. However, if it is a graphics problem of your computer, it is not something we can fix. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Re: [Chimera-users] Extracting asymmetric unit
by Tom Goddard 31 Jul '18

31 Jul '18

Hi Martin, Fit an atomic model of the asymmetric unit then use volume zone (Volume Viewer menu entry Feature / Zone) then save the map (Volume Viewer / File / Same Map As…). See the maskZone option description in the volume save command for details https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/volume.html#output <https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/volume.html#output> Tom > On Jul 31, 2018, at 7:00 AM, Martin Moncrieffe <mcm35(a)cam.ac.uk> wrote: > > Hi Tom, > > A quick question. I have a helical reconstruction (EM) and would like to extract the density for the asymmetric unit from the map. How does one do this? > > Best. > > __martin > >

1 0

Surface vertex density
by Tom Goddard 31 Jul '18

31 Jul '18

For a density map you can control the number of surface triangles and vertices by choosing the subsampling “step” size in the Volume Viewer dialog. Step 2 will use every other grid point along x,y,z axes and result in a coarser mesh. For molecular surfaces computed from atoms, change the vertex density as described here http://plato.cgl.ucsf.edu/pipermail/chimera-users/2011-January/005889.html <http://plato.cgl.ucsf.edu/pipermail/chimera-users/2011-January/005889.html> Tom > On Jul 31, 2018, at 5:53 AM, ⁨עמיחי הולצר⁩ wrote: > > And another question - there is "Surface and Mesh options" under the "Features" tab, so one can control the smoothing of the surface, thickness, etc. How can I control the number of nodes of the surface? I mean, I want the mesh not to be so dense. Is it possible? > > Thanks again! > > 2018-07-31 13:38 GMT+03:00 עמיחי הולצר : > When I save it as OBJ file, how can I watch it in chimera again as a molecule with "atoms" and "bonds" (like CONECT line in pdb file)? > I see that OBJ file look like a xml file, and contains coordinates and edges, but does it reflect the mesh? > > Thanks, > Amichai > > 2018-07-30 19:37 GMT+03:00 Tom Goddard : > Hi Amichai, > > Chimera computes density map isosurfaces using the marching cubes algorithm. It can be saved in various file formats for example OBJ, others are described with the export command > > https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/export.html <https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/export.html> > > Tom > > >> On Jul 29, 2018, at 3:06 AM, ⁨עמיחי הולצר⁩wrote: >> >> Hi Chimera support, >> >> I have 2 questions: >> >> 1. How does Chimera calculate the mesh from the density map? >> >> 2. How can I save the mesh as a file? >> >> Thanks a lot, >> Amichai Holzer >> Huji >> _______________________________________________ >> Chimera-dev mailing list >> Chimera-dev(a)cgl.ucsf.edu <mailto:Chimera-dev@cgl.ucsf.edu> >> http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-dev <http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-dev> > >

1 0

Re: [Chimera-users] [chimera-dev] Save density map as a mesh
by Tom Goddard 31 Jul '18

31 Jul '18

If you want to save atoms, bonds and surfaces and load them into Chimera later, then save a session, menu File / Save Session As…. Tom > On Jul 31, 2018, at 3:38 AM, ⁨עמיחי הולצר⁩ <⁨amiholz(a)gmail.xn--com-yx0a> wrote: > > When I save it as OBJ file, how can I watch it in chimera again as a molecule with "atoms" and "bonds" (like CONECT line in pdb file)? > I see that OBJ file look like a xml file, and contains coordinates and edges, but does it reflect the mesh? > > Thanks, > Amichai > > 2018-07-30 19:37 GMT+03:00 Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>>: > Hi Amichai, > > Chimera computes density map isosurfaces using the marching cubes algorithm. It can be saved in various file formats for example OBJ, others are described with the export command > > https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/export.html <https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/export.html> > > Tom > > >> On Jul 29, 2018, at 3:06 AM, ⁨עמיחי הולצר⁩ <⁨amiholz(a)gmail.com <mailto:amiholz@gmail.com>⁩> wrote: >> >> Hi Chimera support, >> >> I have 2 questions: >> >> 1. How does Chimera calculate the mesh from the density map? >> >> 2. How can I save the mesh as a file? >> >> Thanks a lot, >> Amichai Holzer >> Huji >> _______________________________________________ >> Chimera-dev mailing list >> Chimera-dev(a)cgl.ucsf.edu <mailto:Chimera-dev@cgl.ucsf.edu> >> http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-dev <http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-dev> > >

1 0

display floating XYZ axes
by Pranav Shah 26 Jul '18

26 Jul '18

Dear Chimera Users and Devs, Is there a possibility to display the XYZ axes *a la* coot in chimera, so that one can keep a track of the direction of the views in the window? Cheers, Pranav -- Pranav Shah Postdoctoral Research Fellow. Hogle Lab Harvard Medical School 240 Longwood Avenue Boston, MA 02115 (617) 432-4360 (fax) (617) 432-3839 (lab)

2 2

(no subject)
by Yanhe Zhao 26 Jul '18

26 Jul '18

Hi, This is Yanhe. I want to make movies of side-by side rotaing structures, I set "center of rotation method" to "independent", when I try to save the scenes, chimera give error report as attached file shown. what should I do now? I really appreciate it if you can do me the favor. Best, Yanhe

2 2