- Chimera-users - RBVI Mailing Lists

STL file questions
by David Gene Morgan 26 Sep '13

26 Sep '13

Hi, I have a couple of questions about the chimera STL files. I tried to open one using chimera to determine whether they contain any color information, but I wasn't able to open the file I just wrote. I don't care about that, but I would like to know if they contain color information. Is there any way to control the degree of tesselation when writing an STL file? In other words, some STL files are huge because they contain huge numbers of triangles (and some 3d printers can't handle overly large files). I am wondering whether it is possible to control the size of the output files, which is effectively asking if it is possible to control the number of triangles in the file, how finely sampled the model is, etc. (however one wants to describe that property). Finally, as I understand STL files, they are usually "unscaled" (i.e., the co-ordinate system describing the vertices of the triangles doesn't have fixed length units). Is that true for the STL files chimera creates? If I wanted to create two models with an accurate reflection of their relative atomic sizes, are there tricks I will need to employ? -- David Gene Morgan Electron Microscopy Center 320C Simon Hall IU Bloomington 812 856 1457 (office) 812 856 3221 (3200) http://bio.indiana.edu/~cryo

5 5

Calculating SAS areas for selected residues for a whole trajectory of structures
by Harald Lanig 24 Sep '13

24 Sep '13

Dear Chimera users, I am currently using chimera to calculate the solvent accessible surface for several selected residues of a single structure (I am using the Attribute calculator with the formula sum(atom.areaSAS) to do this). Is there a way to apply this to a set of structures coming from a molecular dynamics trajectory? I am interested in how the solvent accessible surface of a set of residues changes during the simulation. Any hint is highly appreciated! Best wishes, -Harald -- ------------------------------------------------------------------------ PD Dr. Harald Lanig Universitaet Erlangen/Nuernberg Computer-Chemie-Centrum Naegelsbachstr. 25, D-91052 Erlangen Phone +49(0)9131-85 26525 harald DOT lanig AT fau.de Fax +49(0)9131-85 26565 http://www.chemie.uni-erlangen.de/lanig ------------------------------------------------------------------------

2 1

Building DNA along A PBD Using RNA command
by Joshua Carter 23 Sep '13

23 Sep '13

Hi, I'm working on a project in chimera that involves modeling the binding of a RNA-guided protein complex to a double stranded piece of DNA. What I need to do is be able to is either match a DNA pdb to the existing RNA pdb I have or build one using the rna command in chimera. I know there is a path command, is there any way I could specify that to build along a pdb I have already? Or am I just barking up the wrong tree entirely? Thanks,Josh

2 1

Question about multi align viewer
by Sean Connell 20 Sep '13

20 Sep '13

This e-mail comes from CIC bioGUNE. The e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Any unauthorised dissemination or copying of this e-mail or its attachments, and any use or disclosure of any information contained in them, is strictly prohibited and may be illegal. If you have received this e-mail in error, please notify or telephone + 34 944 06 13 00 and delete it from your system. Please consider the environment before printing this email

1 0

selecting a specific residue
by Elaine Meng 19 Sep '13

19 Sep '13

On Sep 18, 2013, at 8:53 PM, Serina Doolittle <serinadoolittle(a)me.com> wrote: > Hi again, > > So now i have another question... > I have selected the ligand because that is what my research mentor and I are interested in (the active site and ligand binding etc.) however, when i select "ligand" it also high lights other molecules around the protein, more around the surface, like butanol - how can i just select the ligand NADPH and not have to select the other small molecule ligands that are not part of the active site of the protein? can i do that? > > Serina Doolittle > Thanks! > Hi Serina, The "ligand" detection uses automatic rules and won't always get what you expect, but there are many other ways to select a specific residue. For example, you can select by residue name and/or number, or with the mouse in the Chimera window. With mouse: Ctrl-click on some atom selects it, and then keyboard up arrow will promote the selection to the whole residue. With command: specify residue name or number, e.g. select :nad select :254.a … would select residue named NAD, or residue 254 in chain A respectively. How do you find out the residue name or number? One way is by hovering the mouse over some atom or bond in the residue, which will pop up a balloon that shows atom name, residue name, and residue number. With menu: Select… Residue… allows selecting by name (all the residue names present will be listed in the menu). NADPH might have residue name NAP, NAD or something like that, since PDB files have 3-letter residue names. That would select all residues of that type, so you'd probably want to use one of the other methods if there are multiple NADPH molecules and you only wanted to select a particular one. Manual pages on selection and command-line atom specification: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/selection.html> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/frameatom_spec.html> Also, you may want to look through the "getting started" tutorial to become more familiar with Chimera. <http://www.rbvi.ucsf.edu/Outreach/Tutorials/GettingStarted.html> I hope this helps, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Hello
by A Amiri 19 Sep '13

19 Sep '13

Hello. I have a problem with chimera! i want to join two pdb file together by C-N peptide bond. Actually this is a modeling of a fusion protein that one part of its, is a protein and another part is a linker. I need a complete structure. I select the carbon atom from one model and nitrogen atom from another model. I use the "build structure<join modesl" menu for this purpose but the "apply" button is inactive still and i don't know how i can activate it! please help me. ________________________________

2 2

Re: [Chimera-users] vop cover
by Elaine Meng 18 Sep '13

18 Sep '13

Hi Pradeep, That message is saying you must specify the density map. I.e. if the atomic structure is model #0 and the density map is model #1, the command could be something like vop cover #1 atom #0 Command usage and options: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/vop.html#cover> Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco P.S. it is recommended you send Chimera questions to chimera-users(a)cgl.ucsf.edu instead of to me directly - thanks! On Sep 18, 2013, at 2:02 PM, Pradeep Pallan wrote: > Hi Elaine, > > I was looking at using vop cover. I have a case where part of the molecule > is not within electron density box. The map cuts off at the unit cell dimensions, > and my space group is P1. Where I need edensity is approximately at y= -10. > When I try the command > 'vop cover "atom"', it gives the message "file.pdb is not a volume". > > Is this the right way of getting the molecule covered in e density or do I need > to use a different option. > > Thank you, > PP

2 1

Problem Using Transparency Command in Chimera
by Joshua Carter 18 Sep '13

18 Sep '13

Hi, My name is Josh Carter and I am an undergraduate researcher working at Montana State University. I am using chimera to make a movie a a protein complex interaction and I'm having trouble with the transparency command. When I type in just the command into chimera it doesn't even recognize it as a command. surftransp works but transp or transparency aren't recognized. Is there a bug fix I can run for this? Thanks,Josh

2 1

How to determine the distance from SG of Cys to the centroid of a nearby Trp ring
by Pande, Ajay K 17 Sep '13

17 Sep '13

I am using Tools/Structure Analysis/Axes -Planes-Centroids. Selecting the Trp Indole ring, obtaining the centroid. Then selecting SG of Cys and the centroid and drawing an axis. That axis does not seem to pass (exactly) through the SG and Centroid- that' my first problem, the 2nd problem is to get the distance between the centroid and SG.

3 7

colour by attributes is only colouring one chain of the dimer, how to make the colouring apply to both chains of homodimer
by Anne-Frances Miller 17 Sep '13

17 Sep '13

Dear team Chimers 1- Thank you for GREAT software ! 2- How to make the colouring apply to both chains of homodimer ? I have a homodimer in which features of the active site derive from both monomers so the degree of active site conservation will only show up if I can apply colour by attributes to both monomers (attribute will be conservation) Right now, colour by attributes is only colouring one chain of the dimer, chain A. Anne-Frances Anne-Frances Miller Professor of Chemistry Director, Magnetic Resonance Centre University of Kentucky Dept. Chemistry, 505 Rose Street Lexington KY 40506-0055

2 2