- Chimera-users - RBVI Mailing Lists

about the command: match
by 韩晓东 05 Sep '13

05 Sep '13

Dear sir, it is no doubt the UCSF chimera is a very excellent software. However, when i use the command: match iterate 2.0 site2 site1, a problem appeared as follows: unequal numbers of atoms chosen for evaluation. would you kindly share me the skill to deal with this problem. thank you very much for your time. sincerely yours, xiaodong han.

2 1

Re: [Chimera-users] Chimera hbond
by Elaine Meng 05 Sep '13

05 Sep '13

On Sep 5, 2013, at 2:40 AM, Neha Gandhi <n.gandhiau(a)gmail.com> wrote: > Hi Elaine, > > I was going through your response on chimera mailing list regarding > saving h-bond analyses during MD ensemble/movie. Either one can write > files every nth frame or save log files. Is there a way to put all the > output of the frames one by one in one single file? > > Your help is appreciated. > > -- > Regards, > Dr. Neha S. Gandhi, > Curtin Research Fellow, > School of Biomedical Sciences, > Curtin University, > Perth GPO U1987 > Australia > LinkedIn > Research Gate Hi Neha, Writing the information to the Reply Log does not save a file. You can accumulate multiple sets of results in the Reply Log and then, at the end, save the Reply Log contents to a single file. The "findhbond" command has two separate options to write results to a file ("saveFile true") and to write results to the reply log ("log true"). <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/findhbond.html> You can save the contents of the Reply Log (in menu under Favorites) to a file with its Save button. I hope this helps, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco P.S. please send chimera questions to chimera-users(a)cgl.ucsf.edu (CC'd on this message) instead of to me directly - thanks!

1 0

display atom by coordinates
by Bala subramanian 03 Sep '13

03 Sep '13

Friends, I am trying to visualize the md movie of a channel protein. In every frame, i want to display only those ions whose Z coord ranges from -10 to 35 (zcoor of the channel) to make the movie. Is there any simple way ?. Precisely displaying atoms with a condition. Thanks in advance, Bala -- C. Balasubramanian

3 2

Linking two chains in a PDB file
by Maxwell Cherf 03 Sep '13

03 Sep '13

Hi Sir/Madam I have a PDB file of three proteins bound together (in one model). I would like to fuse the N terminus of one protein to the C terminus of another protein by adding a peptide linker between the termini. Is it possible to do this using Chimera? So far, I have built a linker and joined it to one of the termini, but doing that combined the linker and all proteins in the file into one model. Now, I can't connect the free end of the linker to the other terminus because they are part of the same model. Any help would be much appreciated! Best, Gerald Cherf, PhD candidate Cochran Lab Bioengineering Department Stanford University

2 7

problem with SwissSidechain plugin installation
by Thomas Evangelidis 03 Sep '13

03 Sep '13

Greetings, I have a problem with SwissSidechain Chimera plugin in Linux 86_64 (Centos 6.3). I followed the instructions yesterday and could use it to create a D-peptide: http://swisssidechain.ch/visualization/chimera.html However today I can't. I tried to add it several times to Preferences->Tools->Locations without any luck. I even did a fresh install of the current stable release and rebooted but I still can't use it. I remember I encountered similar problems in the past. Do you know what's wrong? Thomas -- ====================================================================== Thomas Evangelidis PhD student University of Athens Faculty of Pharmacy Department of Pharmaceutical Chemistry Panepistimioupoli-Zografou 157 71 Athens GREECE email: tevang(a)pharm.uoa.gr tevang3(a)gmail.com website: https://sites.google.com/site/thomasevangelidishomepage/

2 2

help
by rajan sreekanth 30 Aug '13

30 Aug '13

Hi, I had morphed two conformations (open and close) of my protein using 'Morph Conformations' tool. I want know whether we can save the coordinates capturing the intermediate states? Something like an NMR ensemble consisting of the open-intermediate states-close conformations as a single PDB file? Thanks Sreekanth

2 1

Re: [Chimera-users] building a peptide
by Elaine Meng 30 Aug '13

30 Aug '13

Hi Kumud, You would just specify the phi and psi angles for "turn" when building the peptide. You can specify a different phi and psi for each residue if you want, in the peptide building dialog. You do not have to use the values supplied for alpha and beta, you can enter any values, as described in the instructions: <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/editing/editing.h…> Also, in a peptide structure that already exists, you can change phi and psi for each residue, either ...by rotating the bond interactively (see the Adjust Torsions tab in Build Structure): <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/editing/editing.h…> or ...by changing the "phi" and "psi" attribute values in the Selection Inspector (select an amino acid residue in a peptide or protein, click green magnifying glass near bottom right of Chimera window to open the Inspector, Inspect: "Residue" and change the values for "phi angle" and "psi angle") <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/inspection.html> However, it is up to you to specify reasonable values. You can check the Ramachandran map by using the "Ramachandran plot" function in the Model Panel (under Favorites in the menu). <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/modelpanel.html> <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/ramachandran/rama…> Although it is possible to build a whole protein with different secondary structures, it would probably have many severe problems (packing etc.) and the basic peptide-building in Chimera is *not* intended for this purpose. You might want to look into using some other program to predict structure instead, or modify an existing protein structure instead of building the whole thing from scratch. There are probably hundreds of programs and dozens of web servers to predict protein structure, but it is beyond the scope of the chimera-users list and my knowledge to discuss the possibilities. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Aug 29, 2013, at 11:50 PM, Kumud Agarwal wrote: > Hi, > Thank you for your help. > Is there any way to build a beta sheet in Chimera? How can I introduce > turns in between the strands in beta sheet using the build structure > option in chimera?

1 0

Chimera VTK file reader
by Tom Goddard 29 Aug '13

29 Aug '13

Hi Andrew, I added a VTK file reader -- in tonight's Chimera daily build. It handles vtk structured points files in ascii format like the one you gave me. Your file had many -32768 values which seem to indicate regions where you don't have data and normal data values in a range 0 to 55. This makes the histogram display of data values in Chimera worthless because the data range is 33000 but the meaningful range is 55. Chimera is only able to show the whole range. You might want to use some other value to indicate "no data", like -1 if negative values are not valid. Tom > On Aug 6, 2013, at 10:09 AM, Andrew VanBenschoten wrote: > >> Hi Elaine, >> I hope all is well! Quick question for you: I have a 3D .vtk file (attached) that I want to be able to view in Chimera. This is one of the diffuse scatter maps that we discussed earlier: nearly identical to X-ray diffraction patterns except that the data values are applied to entire voxels as opposed to points. Any suggestions as to what I could try? Thank you so much! >> >> -Andrew >> <out.vtk> > >

2 1

building a peptide
by Kumud Agarwal 28 Aug '13

28 Aug '13

Hi I am very new to Chimera. I am using Chimera version 1.8. I am trying to build a peptide in chimera in beta strand conformation using build structure option but the generated peptide did not show beta strand. Why is it so? Thanks, Kumud Agarwal IIT Bombay India

2 1

Make bonds in a large polypeptide
by Francesco Pietra 27 Aug '13

27 Aug '13

Hello; Is there a limit in the number of atoms when using the function "make a bond"? I was trying that in a polypeptide of 450 standard residues (I made it a single model) and it did not work. Just to not be cryptic, that need arises from having modeled by special techniques the initial portion of the polypeptide. Now I would like to replace that portion with the modeled one. I had restrained with rmsd-colvars the dihedrals of a short stretch of alpha helix, so that I could align the modeled portion with the polypeptide. thanks francesco pietra

2 5