- Chimera-users - RBVI Mailing Lists

Re: [Chimera-users] question about surface properties in Chimera
by Elaine Meng 05 Jul '12

05 Jul '12

Hi Katie, The hydrophobicity coloring in the presets menu is simply using the Kyte-Doolittle amino acid hydrophobicity values. That is, all the surface patches belonging to a given amino acid residue type will have the same color, and the colors range from blue for the most hydrophilic through white to orange-red for the most hydrophobic. If you open Render By Attribute (under Tools... Structure Analysis) and set it to show the attribute of "residues" named "kdHydrophobicity" you can apply a different coloring scheme to these same values. Or, if you want, you can write out a file that lists the residues in the protein and the associated values (in that tool's menu, use File... Save Attributes). That will include all the residues, though, not just the ones on the surface. <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/render/render.html…> However, as mentioned, it is merely a lookup based on the residue type. There is a table of Kyte-Doolittle hydrophobicity values here, and instructions for using different scales of amino acid hydrophobicity, if you would like: <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/hydrophob.html> We encourage Chimera questions to be sent to chimera-users(a)cgl.ucsf.edu (Cc'd) unless the message includes private data. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Jul 4, 2012, at 7:40 AM, Katherine Klymko wrote: > Dear Dr. Meng, > Hello--I am a theoretical chemistry student at Columbia University and I am interested in the hydrophobicity maps of proteins that Chimera generates: I know that this can be used to visualize the hydrophobicity of the surface, but does it also generate a file that I can use that lists the positions of the surface atoms or amino acids with their hydrophobic value? I am interested in quantitatively comparing the hydrophobic surface organization in a large number of proteins. > > I apologize if you are the wrong person to ask but when searching for solutions on line, you seemed to be the person that a lot of people went to for help. > Thank you, > Katie Klymko

2 2

just a word of appreciation
by Reut S. Abramovich 05 Jul '12

05 Jul '12

Hi, Just wanted to say i have been using chimera for the last 6 years or so, and enjoy it very much. I hope you will continue to improve this magnificent scientific tool - its doing a great job in balancing a logical, easy to use, user interface and providing the user with a lot of impressive capabilities, which i can run on my laptop (and thats important !!). I really think Chimera team should be congratulated not only on content and code writing, but also on project management. All the best ! -- Kind Regards, Reut S. Abramovich PhD candidate Australian Centre for Astrobiology University of New South Wales Room G13, Biological Sciences Building Kensington, NSW 2052, Australia Phone: (+61) 02 9385 2098 Cell: (+61) 0406 858 646

2 1

Error when exporting to obj format
by Vicente Díaz 05 Jul '12

05 Jul '12

Hi: I am trying to export a scene to obj format. I have tried this export with two different versions of chimera (1.5.3 and 1.6.1), and tried to open the resulting file in two different 3d programs: Cinema 4D and 3d studio max. Although both applications recognize the exported file, when they open it they dont find any content. In C4D, the file is an empty scene, while importer in 3ds max sends an error message telling that there are no objects to import. Therefore, it seems that the file is empty. I have seen that this kind exporting in Chimera is too fast (almost instantly) when compared to exporting to other file formats, like vrml, which take some time but work perfectly. Is there something I am doing wrong or an option I havent noticed to ensure export to obj file format? Thank you in advance, Vicente

4 4

Beta-turns and hairpins
by Kyle Morris 04 Jul '12

04 Jul '12

Dear all, Is there a simple way to model beta-turns and hairpins in polypeptide chains in Chimera? Thanks in advance for any assistance, Kyle

3 2

User Inquiry
by Yen Bui 02 Jul '12

02 Jul '12

To whom this may concern, I’m an undergraduate student doing some research at KSTATE this summer and I’ve been assigned to work on a project that utilizes Chimera. My professor is unavailable a lot of the time and I’ve been struggling a bit with a problem. I’ve been successful at opening up the following PDB files: 1DHK 1DPX 1HYL 2CAU 3BLG 1OA6 1JBC 1OA5 I’m able to open up the .pdb files, proceed to use the commands “del solvent” and “del @ .b” in the command line. I’m also able to go to ToolsàHigher Order Structure à Crystal Contacts before changing the contact distance from 1.0 to 4.0 and check mark the create copies of contacting molecules. However when I attempt to do the following actions for the rest of the proteins I run into a variety of issues: For example 2CAU: When I attempt to “measure buried area #0 # 2-7,” I get the following response in my reply log: #0, chain A: JACK BEAN vicilin 6 pairs of NCS asymmetric units of 2CAU contact at distance 1.0 A Atoms MTRIX SMTRY Unit cell MTRIXref Copies 1 0 4 0 0 0 0 1 1 0 5 0 0 0 0 1 1 0 6 -1 0 -1 0 1 1 0 8 0 0 0 0 1 1 0 9 0 0 -1 0 1 1 0 11 0 0 -1 0 1 C:\Program Files\Chimera 1.6.1\bin\mscalc.exe 1.400000 2.000000 1 MSMSLIB 1.3 started on Local PC Copyright M.F. Sanner (March 2000) Compilation flags C:\Program Files\Chimera 1.6.1\bin\mscalc.exe 1.400000 2.000000 1 MSMSLIB 1.3 started on Local PC Copyright M.F. Sanner (March 2000) Compilation flags C:\Program Files\Chimera 1.6.1\bin\mscalc.exe 1.400000 2.000000 1 MSMSLIB 1.3 started on Local PC Copyright M.F. Sanner (March 2000) Compilation flags C:\Program Files\Chimera 1.6.1\bin\mscalc.exe 1.400000 2.000000 0 MSMSLIB 1.3 started on Local PC Copyright M.F. Sanner (March 2000) Compilation flags C:\Program Files\Chimera 1.6.1\bin\mscalc.exe 1.400000 2.000000 0 MSMSLIB 1.3 started on Local PC Copyright M.F. Sanner (March 2000) Compilation flags C:\Program Files\Chimera 1.6.1\bin\mscalc.exe 1.400000 2.000000 0 MSMSLIB 1.3 started on Local PC Copyright M.F. Sanner (March 2000) Compilation flags C:\Program Files\Chimera 1.6.1\bin\mscalc.exe 1.400000 2.000000 0 MSMSLIB 1.3 started on Local PC Copyright M.F. Sanner (March 2000) Compilation flags [End of Reply Log] So I’m not able to get back the calculations I want. Also, when I attempt to use the Surface Analysis à Attributes Calculator to run the following function : sum(atom.buriedSASArea) and check the “Restrict formula domain to current selection, if any” and “Save calculation results to file,” after selecting the “C” atoms I get the reply: Formula evaluation error: expecting vector argument in function Is there something I need to do before I attempt these actions? Also, I have very little experience with programs in general (I’m a chemistry major/upcoming experimental chemist working with theortical physicist…a little out of my element). Thanks in advance, -Yen Bui

2 3

Alignment of symmetry axes via Chimera
by danashah＠post.tau.ac.il 02 Jul '12

02 Jul '12

Hi all, I've only joined this mailing list lately, so pardon me if this question was asked and answered before. We have two different peptides, each contains a 4-fold symmetry axis. We would like to align those two symmetry axes, without superimpose one peptide on the other, since they should be continuous. Is there a way to do that via Chimera (gui or no gui)? I was able to find this conversation: http://www.cgl.ucsf.edu/pipermail/chimera-users/2008-October/003140.html but it doesn't solve our specific situation. Best, Dana. __ Dana Sachayni Joel Hirsch's Lab Faculty of Life Sciences Tel Aviv University Ramat Aviv, Israel e-mail: danashah(a)post.tau.ac.il

2 1

Wrong formtting into pdb file after "Chimera"
by Hsih-Te Yang 29 Jun '12

29 Jun '12

Hello: By using "Chimera" under its environment, I retrieved the 3GBM from internet of PDB. Then "H" and "L" chains were selected and then combined into one model. The formats before and after using Chimera are different: Before and download from PDB: original 3GBM.pdb: -------------------------------------------------------------------------- ATOM 8198 N ILE H 52 21.400 -46.642 -15.670 1.00 34.21 N ATOM 8199 CA ILE H 52 21.907 -48.031 -15.705 1.00 34.50 C ATOM 8200 C ILE H 52 22.650 -48.325 -17.003 1.00 34.35 C ATOM 8201 O ILE H 52 22.192 -47.956 -18.089 1.00 34.71 O ATOM 8202 CB ILE H 52 20.781 -49.070 -15.662 1.00 34.67 C ATOM 8203 CG1 ILE H 52 19.817 -48.868 -14.495 1.00 35.26 C ATOM 8204 CG2 ILE H 52 21.375 -50.440 -15.579 1.00 36.91 C ATOM 8205 CD1 ILE H 52 20.481 -48.373 -13.235 1.00 36.77 C ATOM 8206 N PRO H 52A 23.772 -49.033 -16.926 1.00 34.41 N ATOM 8207 CA PRO H 52A 24.505 -49.283 -18.185 1.00 34.55 C ATOM 8208 C PRO H 52A 23.750 -50.255 -19.109 1.00 34.33 C ATOM 8209 O PRO H 52A 22.874 -51.013 -18.645 1.00 34.29 O ATOM 8210 CB PRO H 52A 25.817 -49.905 -17.709 1.00 34.19 C ATOM 8211 CG PRO H 52A 25.402 -50.687 -16.528 1.00 35.46 C ATOM 8212 CD PRO H 52A 24.336 -49.808 -15.815 1.00 34.63 C -------------------------------------------------------------------------- After using Chimera and saved as ".pdb" file: -------------------------------------------------------------------------- ATOM 371 N ILE H 52 -61.722 -45.711 -51.406 1.00 34.21 N ATOM 372 CA ILE H 52 -62.988 -46.402 -51.737 1.00 34.50 C ATOM 373 C ILE H 52 -63.058 -46.767 -53.215 1.00 34.35 C ATOM 374 O ILE H 52 -62.716 -45.957 -54.082 1.00 34.71 O ATOM 375 CB ILE H 52 -64.219 -45.520 -51.499 1.00 34.67 C ATOM 376 CG1 ILE H 52 -64.272 -44.923 -50.094 1.00 35.26 C ATOM 377 CG2 ILE H 52 -65.457 -46.324 -51.739 1.00 36.91 C ATOM 378 CD1 ILE H 52 -63.739 -45.839 -49.022 1.00 36.77 C ATOM 379 N PRO H 52 -63.548 -47.961 -53.533 1.00 34.41 N ATOM 380 CA PRO H 52 -63.580 -48.321 -54.966 1.00 34.55 C ATOM 381 C PRO H 52 -64.618 -47.494 -55.747 1.00 34.33 C ATOM 382 O PRO H 52 -65.552 -46.927 -55.145 1.00 34.29 O ATOM 383 CB PRO H 52 -63.975 -49.797 -54.948 1.00 34.19 C ATOM 384 CG PRO H 52 -64.891 -49.879 -53.793 1.00 35.46 C ATOM 385 CD PRO H 52 -64.271 -48.943 -52.718 1.00 34.63 C -------------------------------------------------------------------------- The "52A" -> "52", there is no discrimination between "ILE" and "PRO" on the position 52 of H chain. Please let me know, what wrong with my data processing? Thank you a lot. Hsih-Te

2 2

Untranslating after using solvate
by Matthew Baumgartner 29 Jun '12

29 Jun '12

Hello, I am using chimera to add a shell of water around a given protein using the solvate command through the command line. However, upon adding solvent, the protein is translated/rotated a bit, as mentioned in the documentation ( file:///opt/UCSF/Chimera64-1.6/share/chimera/helpdir/ContributedSoftware/solvate/solvate.html <cid:part1.03060408.05020907@pitt.edu>). However, I would like to leave the protein in it's input coordinates and simply add waters around it. Is there a way to use the solvate command without translation? If not, how should I go about resetting the structure back to it's original coordinates? Thanks, Matt Probably unnecessary details: Running: USCF Chimera, production version 1.6 (build 35700) Under: Ubuntu 12.04 64-bit

2 2

Chimera registration
by Sébastien POMEL 28 Jun '12

28 Jun '12

Hi, I tried to register because my registration has expired but when I enter my informations it says that I have to enter my last name first, and then my first name. I did not make any mistake but it keeps saying this. Could you help me? Thank you Sébastien Pomel Sébastien POMEL, Ph.D. Antiparasitic Chemotherapy Group UMR CNRS 8076, Faculty of Pharmacy, University PARIS XI, 5 rue Jean-Baptiste Clément, 92296, CHATENAY-MALABRY CEDEX FRANCE Tel : +33 (0)1-46-83-52-84 Fax : +33 (0)1-46-83-55-57

2 1

Phases of the 3D FFT
by Denis Chrétien 28 Jun '12

28 Jun '12

Dear all, I'm new to this list, so maybe this question has been raised previously. Sorry if this is the case. We are using the capability of Chimera to perform 3D Fourier transforms, in order to analyse the effect of the missing wedge on cryo-electron tomograms of microtubules. The "layer lines" of the microtubules are nicely revealed in 3D, showing rings corresponding to the amplitudes of their FFT. Yet, it would be really nice to have the phases displayed, e.g. using colors. Would that be possible to be implemented into the "vop Fourier" command of Chimera? Best, Denis ___________________________ Université de Rennes 1 UMR 6290, équipe TIPs Campus de Beaulieu, Bât. 13 35042 Rennes Cedex France Tel. +33 (0)2 23 23 67 64 http://equipes.igdr.univ-rennes1.fr/fr/tips/ ___________________________

2 1