- Chimera-users - RBVI Mailing Lists

the docking confidence score
by Yanhe Zhao 27 Jan '22

27 Jan '22

Greeting there, I'm doing the sequential fitting to fit 3 models to my map. The question is where I can find the docking confidence score? I did try molmap to simulate the map of one model and then use the "Fit in map" to have the correlation readout. But I'm not sure is the correlation good to describe confidence, and what I want is the score to describe overall confidence of sequential fitting not just one model. So any log file I can find to report the score of docking? Thanks and cheers, Yanhe

2 4

Change atom size and color depending on atomic charge
by henriquecsj＠gmail.com 27 Jan '22

27 Jan '22

Hi! I was wondering if it is possible to iteratively change each atom's size and color relative to, let's say, the atomic charge computed by a quantum chemistry package. This is to help the reader understand changes happening between the ground and excited states of the molecules. Cheers!

3 2

Re: [Chimera-users] A specific request for visualizing a model in Chimera
by Elaine Meng 24 Jan '22

24 Jan '22

Hi Qian, I don't know of any way to "smooth" those junctions between coil and helix/strand, but I believe that many people 3D print the ribbons and they have not been a problem as long as you make the overall ribbon thick enough, e.g. with the "struts" command or Ribbon Style Editor. <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/struts.html> <https://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/ribbonstyle/ribb…> Although I've seen it in other programs, Chimera does not have an option to smoothly taper the ribbon between coil and helix/strand. In general we recommend sending questions to the mailing list CC'd here, but only if you are not including private data. In this case I don't think it matters what protein structure is involved, so it is a general question ... to which I don't have an answer but maybe others on the list will. I did not include your session in this public message. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Jan 24, 2022, at 9:37 AM, Qian Zhang <qzhang30(a)gmail.com> wrote: > > Dear Dr. Meng, > I hope you are doing well. I emailed you guys about 4 years ago and got someone to help me write a script to do this but I can't find that script anymore. > > What I wanted to achieve is to 'smooth' out the connections between random coil vs. helixes or vs. sheets. Not like the one shown in this picture that the coil just inserts into the start of the sheet. > > > I've attached a session file (v.1.15) that can be used as a starting point. > > The purpose of this is to 3D-print this into a structure and I am afraid all those non-smooth connections are going to break off. > > Please let me know. > Qian >

2 5

Fwd: Model protein with coenzyme
by Eric Pettersen 24 Jan '22

24 Jan '22

> Begin forwarded message: > > From: Xinxin <zhuxinxin17(a)mails.ucas.edu.cn> > Subject: Chimera bug report submission > Date: January 22, 2022 at 4:36:13 AM PST > To: chimera-bugs(a)cgl.ucsf.edu > > The following bug report has been submitted: > Platform: windows > Chimera Version: 2022 > Description > I want ask a question, could the Chimera model protein with coenzyme? And how to perform? > Thank you very much.

2 1

Fwd: Making copies of an atomic structure and fit in the map
by Eric Pettersen 21 Jan '22

21 Jan '22

> Begin forwarded message: > > From: "Sen, Anindito" <andysen(a)tamu.edu <mailto:andysen@tamu.edu>> > Subject: Making copies of an atomic structure and fit in the map > Date: January 20, 2022 at 4:08:11 PM PST > To: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu <mailto:chimera-users-bounces@cgl.ucsf.edu>> > > > Dear All, > > What will be the correct complete command (sym) for making copies of an atomic structure and symmetrize them to dock in the relevant density map. > > Stay safe & Regards > > Anindito Sen. Ph.D > > Microscopy and Imaging Center > Texas A&M University > 301 Old Main Dr > College Station, TX 77843-2257 > > Office: ILSB Room 1133 > <http://microscopy.tamu.edu/>Tel. 979-458-9881 > fax: 979-847-8933 > http://microscopy.tamu.edu <http://microscopy.tamu.edu/>

3 3

Automate calculation and saving of residues' structural attributes
by André 21 Jan '22

21 Jan '22

Hello! I'm working on an automated pipeline (in Python) for the structural analysis of proteins. In particular, I'm using Chimera to calculate and save to .txt files some structural properties of residues (namely: areaSAS, areaSES, relSESA, bfactor, kdhydro, phi, psi). These files are the inputs of the pipeline. However, currently these files are exported manually, and, for the purpose of building a fully automated pipeline, it would be great to also automate this step of generating the attributes and exporting their respective .txt files. I searched a lot, and tried some ways to achieve such an automation, but nothing worked (if you'd like to know about these (unsuccessful) ideas that I had, I can share them in next messages). Given that, I'd like to know if anyone has done something like this, and/or have any guidance on how I could proceed, if that's something possible at all to be done with Chimera (or even ChimeraX). I really appreciate any help you can provide! Thank you so much, André.

2 2

Question: How ro show the H-bond
by Kenji MATSUI 16 Jan '22

16 Jan '22

Dear Chimera company Thank you for always answering my questions so carefully. Thank you for allowing me to use your software. I am Japanese, so I hope you will understand that there are some inappropriate expressions. I would like to ask you one question. I entered the data as per the manual. However, the hydrogen bond did not show up. What should I do? The figure of Parameters [image: image.png] The result of showing [image: osh4,ID 223-230 .png] Details on how to do it *Display interactions between ligand and protein.* 1.Favorites→Model Panel→group/ungroup( Go down at close.) [image: image.png] 2.Favorite→Command line: combine #0.1,0.2 →select combination at model Panel [image: image.png] 3.rename 4.Select →Residue→ LIG or command: select :LIG 5.Tool→Surface/Binding Analysis→ Find H Bond [image: image.png] Check three points 1."Only find H-bonds..." e.g. "with at least one end selected". 2. "If endpoint atom hidden, shown endpoint residue" or else it will not show all of the H-bonds it finds 3.Write information to reply log Apply→OK --------------------------------------------------------------------------- 松井健治東京農工大学大学院工学府産業技術専攻修士〒184-8588 東京都小金井市中町2-24-16 Mail: s214903z(a)st.go.tuat.ac.jp Kenji Matsui Graduate School of Tokyo University of Agriculture and Technology 2-24-16, Nakamachi, Koganei-shi, Tokyo 184-8588, Japan Mail: s214903z(a)st.go.tuat.ac.jp

2 4

zoom on the selection after orientation of the selected object
by Enrico Martinez 16 Jan '22

16 Jan '22

Dear Chimera users! I am using ChimeraX for the visualization of protein-ligand interactions comparing two different pdb structures A - ensemble for doclong; B- X-ray pose: open A.pdb open B.pdb' match #2 to #1.1 # close all docking poses with the exemption of the first pose: close #1.2-end view wait # hide the protein from X-ray pose keeping only ligand for visualisation: hide #2 & protein cartoon hide #2 & protein surface hide #2 & protein #orient view on the model 1.1 and zoom closer view #1.1 orient; turn z 90 zoom 1.5 wait The problem is that when I use zoom 1.5 after view #1.1 it hides completely the representation for the molecule on the current GUI. Otherwise, it works fine if I center view on the both A and B: view orient; turn z 90 zoom 1.5 How could I zoom the screen properly after orientation of the view on the first molecule? Many thanks in advance! Enrico

1 0

Re: [Chimera-users] ChimeraX in no-gui mode: visualisation of protein-ligand interactions
by Enrico Martinez 15 Jan '22

15 Jan '22

Thank you Elaine! I played with it today and it looks great! Some additional questions (sorry for it at the first time the thing seems abit tricky): 1)may I automatically place the 2D label on the top left corner of the screen instead of manually defining its X-Y using xpos ypos? 2dlab create title text \"name_of_the_complex" color red font gothic xpos .04 ypos .99 size 40 2) assuming that I open 2 molecules in the same session open A.pdb open B.pdb then I remove all the models with the exemption of the first close #1.2-end How could I superimpose A to B (align the structures) and then hide cartoon from B.pdb (keeping only ligand) ? 3) Is there any possibility to put your signature on the screen-shot? like "Observed by Enrico Martinez" ? :-) Many thanks in advance!! Enrico сб, 15 янв. 2022 г. в 00:11, Elaine Meng <meng(a)cgl.ucsf.edu>: > > See the "color" command for coloring the ligand, and "set" or "graphics" for coloring the background, and "label" (or "2dlabels" but that usually requires you to position them interactively) for labeling. All of these are included in the "making images" page I mentioned near the end of my previous message. > Best, > Elaine > > > > > On Jan 14, 2022, at 3:03 PM, Enrico Martinez <jmsstarlight(a)gmail.com> wrote: > > > > Thank you very much, Elaine! > > I really like ChimeraX and it looks so great for me with all of those > > presents :-) I will look for the details regarding the options. Just a > > few addtional questions regarding customizing representation of > > protein-ligand interactions using ghost preset: > > In particular: I would like to color ligand (in orange??) > > To add labels (like Try-193) on the displayed side-chains around the ligands > > To change background from black to indigo! > > :-) > > Many thanks in advance! > > Cheers > > Enrico > > > > пт, 14 янв. 2022 г. в 23:48, Elaine Meng <meng(a)cgl.ucsf.edu>: > >> > >> Hello, > >> It isn't my area of expertise, but I don't think you can save images in nogui mode except with Linux OSMesa. > >> > >> As for your other questions, which commands do certain things... > >>> may you suggest some commands that I may introduce into my batch file to > >>> 1) delete all models from the multi-model pdb file with the exemption > >>> of the first model. > >>> 2) switch from cartoon to surface representation of the protein > >>> 3) visualize protein-ligand non-covalent interactions in the current model > >> > >> > >> (1) close submodels except for first one. Maybe something like command: > >> > >> close #1.2-end > >> > >> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/close.html> > >> > >> (2) switch from ribbon to molecular surface of protein. Well, you probably want to do some coloring and other stuff besides just hiding ribbon and showing surface, which could be something like commands: > >> > >> ~ribbon > >> surface protein > >> > >> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/cartoon.html> > >> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/surface.html> > >> > >> Or you could try a surface-showing preset, e.g. > >> > >> preset ghost > >> > >> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/preset.html> > >> > >> (3) depends what you mean by showing interactions (lines? selection? coloring?). You should take a look at commands "contacts" and/or "hbonds" and choose the options that give what you want. > >> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/clashes.html> > >> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/hbonds.html> > >> > >> You will need to spend some time trying the commands since there are an infinite number of possibilities for combinations of coloring and display styles and lighting and graphics effects. See also commands "lighting" and "graphics" and "set" > >> > >> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/lighting.html> > >> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/graphics.html> > >> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/set.html> > >> > >> ... and the "making images" page with several relevant commands > >> <https://rbvi.ucsf.edu/chimerax/docs/user/images.html> > >> > >> I hope this helps, > >> Elaine > >> ----- > >> Elaine C. Meng, Ph.D. > >> UCSF Chimera(X) team > >> Department of Pharmaceutical Chemistry > >> University of California, San Francisco > >> > >> > >>> On Jan 14, 2022, at 2:17 PM, Enrico Martinez via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > >>> > >>> Dear Chimera's users! > >>> First I wish Happy New Year to everyone! > >>> I am just switching from Chimera to ChimeraX that I am going to use in > >>> no-gui (batch) mode to prepare screen shots of protein-ligand > >>> interactions based on the protein-ligand docking poses. Basically I am > >>> loading a pdb file of the complex (consisted of protein and ligand in > >>> multi-model format) from the terminal of my macOSX. I have a template > >>> for a batch file created in the bash script on the fly, that I used 2 > >>> years ago with an early version of ChimeraX. > >>> > >>> # a batch file for chimeraX > >>> printf "open ${pdb} > >>> view; zoom 1.0; turn x 90; turn z -80; > >>> wait > >>> # options for appearance > >>> preset 'overall look' publication > >>> # set bg powder blue > >>> set silhouettes t; set silhouetteColor indigo; set silhouetteDepthJump 0.02 > >>> > >>> # make info of the screen > >>> 2dlab create title text \"${pdb_name}\" color red font gothic xpos .04 > >>> ypos .92 size 35 > >>> > >>> # options for light > >>> light depthcuestart .4 depthcueend .8; lighting full intensity 1.4 > >>> shadows true qualityOfShadows finer > >>> > >>> save image ${structure}/${pdb_name}.png format png width 800 height > >>> 600 supersample 4 transparentBackground false > >>> wait > >>> exit" > chimeraX.${pdb_name}.cxc" > >>> > >>> then I use it directly in terminal as > >>> chimerax-daily chimeraX.${pdb_name}.cxc" > >>> > >>> may you suggest some commands that I may introduce into my batch file to > >>> 1) delete all models from the multi-model pdb file with the exemption > >>> of the first model. > >>> 2) switch from cartoon to surface representation of the protein > >>> 3) visualize protein-ligand non-covalent interactions in the current model > >>> > >>> Yours with thanks > >>> Enrico > >> > > >

1 0

ChimeraX in no-gui mode: visualisation of protein-ligand interactions
by Enrico Martinez 15 Jan '22

15 Jan '22

Dear Chimera's users! First I wish Happy New Year to everyone! I am just switching from Chimera to ChimeraX that I am going to use in no-gui (batch) mode to prepare screen shots of protein-ligand interactions based on the protein-ligand docking poses. Basically I am loading a pdb file of the complex (consisted of protein and ligand in multi-model format) from the terminal of my macOSX. I have a template for a batch file created in the bash script on the fly, that I used 2 years ago with an early version of ChimeraX. # a batch file for chimeraX printf "open ${pdb} view; zoom 1.0; turn x 90; turn z -80; wait # options for appearance preset 'overall look' publication # set bg powder blue set silhouettes t; set silhouetteColor indigo; set silhouetteDepthJump 0.02 # make info of the screen 2dlab create title text \"${pdb_name}\" color red font gothic xpos .04 ypos .92 size 35 # options for light light depthcuestart .4 depthcueend .8; lighting full intensity 1.4 shadows true qualityOfShadows finer save image ${structure}/${pdb_name}.png format png width 800 height 600 supersample 4 transparentBackground false wait exit" > chimeraX.${pdb_name}.cxc" then I use it directly in terminal as chimerax-daily chimeraX.${pdb_name}.cxc" may you suggest some commands that I may introduce into my batch file to 1) delete all models from the multi-model pdb file with the exemption of the first model. 2) switch from cartoon to surface representation of the protein 3) visualize protein-ligand non-covalent interactions in the current model Yours with thanks Enrico

4 5