- Chimera-users - RBVI Mailing Lists

Re: [Chimera-users] Scripting to write / save multiple models into single pdf file
by Eric Pettersen 23 Mar '10

23 Mar '10

Hmm, it seems that you have the Model Panel set to autostart in your preferences. Now, Chimera probably should ignore autostarting tools when it is in nogui mode, but currently it doesn't. So what you will have to do for now (until we fix this) is to start Chimera normally, turn off the autostart of the Model Panel (and any other graphical tools probably), save the new preferences, and then run your script. If you look in the "Preferences" preference category, it will show the location of the preferences file. You could squirrel away your original preferences file somewhere, make the version with no autostarting, copy that somewhere, and then put your original version back. You would then be able to use the no-autostarting preferences by specifying it's location with the --preferences startup option. --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu On Mar 8, 2010, at 7:32 PM, Sumitro Harjanto wrote: > Hi Eric, > > Thanks for the suggestion. I don’t really script, I usually use a c+ > + code / excel to generate the command (.cmd) files. Should be okay > for the automation for now, if I run into any problem then I will > post it up here again. =] > > Mean while I try running the command “chimera.exe –nogui” in PATH/ > chimera/bin but got the following error message. I followed the > instruction and copy over the debug message (below). any advise? I’m > on a win7 X86 platform btw. > > Thanks, > Sumitro > > ----------------------------------------------------------------------------------------------------- > > Chimera failed abnormally; the exit code was: 1 > Use –debug command line option for the full error message. > > -------------------------------------------------------------------------------------------------- > Cannot execute 'gzip': no automatic decompression of .Z files > Traceback (most recent call last): > File "E:\Chimera\share\__main__.py", line 65, in <module> > value = chimeraInit.init(sys.argv) > File "E:\Chimera\share\chimeraInit.py", line 401, in init > extension.startup(startExtensions) > File "E:\Chimera\share\chimera\extension\base.py", line 1056, in > startup > manager.autostartTools(extNames) > File "E:\Chimera\share\chimera\extension\base.py", line 959, in > autostartTools > > emo.activate() > File "E:\Chimera\share\ModelPanel\ChimeraExtension.py", line 23, > in activate > display(self.module('base').ModelPanel.name) > File "E:\Chimera\share\chimera\dialogs.py", line 77, in display > dialog = find(name, create=1) > File "E:\Chimera\share\chimera\dialogs.py", line 62, in find > return d() > File "E:\Chimera\share\chimera\baseDialog.py", line 523, in __init__ > BaseDialog.__init__(self, master, *args, **kw) > File "E:\Chimera\share\chimera\baseDialog.py", line 244, in __init__ > self.fillInUI(self.__top) > File "E:\Chimera\share\ModelPanel\base.py", line 217, in fillInUI > self._addColumns() > File "E:\Chimera\share\ModelPanel\base.py", line 436, in _addColumns > self._buildTable() > File "E:\Chimera\share\ModelPanel\base.py", line 454, in _buildTable > % len(filter(lambda s: s == 1, self.shownColumns))) > File "E:\Chimera\bin\Lib\lib-tk\Tix.py", line 1306, in __init__ > cnf, kw) > File "E:\Chimera\bin\Lib\lib-tk\Tix.py", line 307, in __init__ > self.tk.call(widgetName, self._w, *extra) > _tkinter.TclError: invalid command name "tixScrolledHList" > Return code: 1 > Press return or enter to to exit >

3 15

question concerning volumetric data
by Eric Pettersen 22 Mar '10

22 Mar '10

Hi, I have a EM map, spider file and the data are scaled by a factor of 3.6. I need to expand the map by this factor. How can I do this with chimera? Thank you very much for your help Best Regards Stefan

2 1

Regarding backbone images for protein structures
by Saurabh Gupte 17 Mar '10

17 Mar '10

Hello, I have been using Chimera for observing the 3D model of protein structures. For viewing the backbone structure, I used the following commands: show backbone or show minimal But in the latest production version 1.4, I am not able to view the backbone/minimal structure. The 3D structure is rendered properly but the above command do not seem to work. Have there been any changes in the format for above commands or have they been substituted by some other commands? Thanks, Saurabh

4 4

Step size in MD Movie
by Francesco Pietra 16 Mar '10

16 Mar '10

Hi: In my hands, with "chimera alpha version 1.5 (build 30193) 2010-03-06 09:27:34 GMT" linux 64bit (Debian lenny) the step size in MD Movie is always "1", no matter how higher it is set. I did not check if the stable version has the same problem. Could please users verify what happens on changing the step size? thanks francesco pietra

2 2

Volume surface colors
by Will Moore 15 Mar '10

15 Mar '10

Hi, I'm trying to write a script to change the surface colors of volumes in Chimera: This is what I have so far. for m in chimera.openModels.list(): print m.surface_colors m.surface_colors = [(1.0, 0.0, 0.0, 1.0)] print m.surface_colors This seems to alter the surface colors, but has no effect on what the maps look like in the UI. Do I need to call something else for the UI to be updated, or am I using the wrong approach entirely? Also, I would like to only select the volumes in the first line but I don't know what modelTypes this is: for m in chimera.openModels.list(modelTypes=[chimera.Molecule]): Many thanks, Will. William Moore Wellcome Trust Centre for Gene Regulation & Expression College of Life Sciences MSI/WTB/JBC Complex University of Dundee Dow Street Dundee DD1 5EH United Kingdom Phone 01382 386364 http://openmicroscopy.org.uk

2 3

file format conversion using chimera
by snoze pa 12 Mar '10

12 Mar '10

Dear Chimera Users, I want to save/convert a pdb file into .mrc or .ccp4 format using chimera I think I did it before using chimera but don't remember exactly how! I will highly appreciate your help. Thank you S

2 1

Re: [Chimera-users] Chimera: Display map around atoms
by Elaine Meng 12 Mar '10

12 Mar '10

Hi Greg, That "bv" shortcut creates a new, larger map (periodically extended as needed to cover the atoms), which sounds like the opposite of what you want. You can limit the density display to a zone around selected atoms. Choose "Zone" from the "Features" menu in the Volume Viewer dialog to add the relevant controls to the dialog. The zone feature is described here: <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/volumeviewer/volum… > For future questions, it's better to send Chimera questions to the chimera-users(a)cgl.ucsf.edu list rather than to me directly. That way it won't fall through the cracks if I'm on vacation, or sick, or don't know the answer. I hope this helps, ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Mar 12, 2010, at 1:24 PM, Greg Friedland wrote: > Hi Elaine, > Thanks for your earlier help with Chimera. I'm currently have > difficulty displaying a density map. I'd like to only display the > density around protein atoms, not the full symmetry density. I tried > the shortcut 'bv' according to http://www.cgl.ucsf.edu/pipermail/chimera-users/2008-August/003002.html > but the new map still contains lots of the symmetric molecule > density. Is there another way? > Thanks, > Greg > > Greg Friedland > Postdoc > Sandia National Lab > Joint BioEnergy Institute

1 0

Recording trajectory
by Francesco Pietra 11 Mar '10

11 Mar '10

Hi: I am interested in following the pathway of a ligand forced to leave a protein. I can follow that path with the movie (NAMD format) but I would be interested to also have a trace of the pathway recorded. I would like to show around the protein the various traces for different pathways of exit of the same ligand. thanks francesco pietra

3 5

Re: [Chimera-users] Recording trajectory
by Eric Pettersen 09 Mar '10

09 Mar '10

On Mar 9, 2010, at 2:17 PM, Francesco Pietra wrote: > Hello Eric: > I have seen your later correction mail. > > I had a bad day, that is little time for chimera and with little > success. Please try to guess were I was faulty. > > francesco@tya64:~$ chimera --version > chimera alpha version 1.5 (build 30193) 2010-03-06 09:27:34 GMT > francesco@tya64:~$ > This is amd64, at the moment I have no 32bit computer. > > <select ligand> selects too much. > > <select :residue.number> > <select :residue.name> > do select exactly what I want (which is a small ligand of HEME ligand > of the protein. > > The problem was with <define> command > > MD-movie...Per-Frame "define centroid :residue.number" ... Apply > > then activating the movie gave the same view as not going through the > Per_Frame, i.e., the small ligand does not leave any sphere on the > path. I did not investigate if the sphere are too small to be seen at > the magnification I used, ore have the same color as the background > (black). Very likely, I did some other major mistake. Not sure what to say. Works for me. I've appended an image of centroids tracing the motion of a small ligand in an RNA binding site. I used a step size of 10 and this 'define' command: define centroid raiseTool false radius 1.0 color goldenrod sel "raiseTool false" prevents 'define' from trying to bring up the Axes/ Planes/Centroids tool (and update that tool's table) for every centroid created. The other options control the size and color of the centroid. I had the small ligand selected so 'sel' is my atom spec. I tried it a second time with ":35" (which also selects the small ligand) and that worked too. FYI, "~define" will get rid of all the centroids. I hope this helps somehow. Are you sure you had the "Interpret script as" part of the per-frame dialog set to "Chimera commands"? I can't imagine that you didn't, since you would have gotten some kind of error if it had been interpreted as Python. --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

2 1

Re: [Chimera-users] Scripting to write / save multiple models into single pdf file
by Elaine Meng 08 Mar '10

08 Mar '10

On Mar 7, 2010, at 5:12 AM, Sumitro Harjanto wrote: > Hi Meng, > I would like to use chimera to help me with a process of combining > receptors and ligands that were modelled separately (in separate > files) > > So here is my intended framework: > > For each iteration: > • open “template.pdb” template file (which contains the receptor/ > ligand complex) I used to model the receptor and ligand > • open the receptor_model.pdb > • open the ligand_model.pdb > • match receptor to template > • match ligand to template > • close template.pdb > • save the models in their current position into a single new pdb > file. > > I was exploring the feasibility of using the command “write” but I > am not too sure if it will allow me to save the complex as a single > pdb file..? > > On a side note, if it’s possible, any suggestion on how to optimise > the run time since I might be running this for a large number of > iterations ..? I read somewhere about switching off the GUI to save > time, does it help..? > > Thanks! > Cheers, > Sumitro Hi Sumitro, You can't save multiple models in one file with the "write" command, but you can use "write" multiple times, one for each model you want to save. If you make sure to save each model "relative" to the same model, they will be in the correct positions with respect to each other when you reopen the files. See the "relative" keyword: <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/write.html> Or, if you really need to have them in a single file, you can use the "combine" command to create a new single model from multiple models. You would do that after the matching, but before saving the PDB file. <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/combine.html> I can't answer about how to script for multiple models, or how much faster it might be to use noGUI, so I'm sending this to the chimera- users list. In the future, please send Chimera questions to the chimera-users(a)cgl.ucsf.edu list, because I might be away from work or (like now) others may be better able to answer the question. I hope this helps, ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

2 1