- Chimera-users - RBVI Mailing Lists

removing side chains
by Matthew Dougherty 05 Nov '08

05 Nov '08

I have a session that someone has given me. It consists of 24 monomers in two states, each monomer colored differently. In the model panel I see only two IDs. I need to do a morph showing just the ribbons. Because the overall number of atoms is quite large, I want to strip off the side chains in order to reduce the computation. Is there an easy way to do this? Or do I have to go back to individual monomers, strip off the side chains, recolor, and recombine them, before morphing? thanks, Matt

2 1

Re: [Chimera-users] Models or chain
by Eric Pettersen 05 Nov '08

05 Nov '08

Hernando Sosa wrote: > Hi Elaine, > > The problem I have is actually not with chimera itself. I can > display all the models etc nicely within it. However, I want to make > now a PDB file of a multi-protein complex in a format that can be > deposited in the PDB database. Then I run into problems if the models > are separated by Model ENDMDL lines or have chains with the same > letter > identifier. I was hoping to be able to generate a multi-protein PDB > file from my chimera fitting without having to manually edit a lot of > lines in the multimodel PDB file. Any suggestions on how to best do > this > would be appreciated. > Hi Hernando, Elaine kind of mentioned this in passing in another posting, but you can now do what you wanted to do above with the new "combine" command (also available as the Combine button of the Model Panel). It's in the current daily build and upcoming release candidate/production release. --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

Coloring snapshots using time as attribute
by Ibrahim Moustafa 03 Nov '08

03 Nov '08

Dear Chimera team, I have several snapshots from simulation loaded as different models. I wonder if there is a way to color them coded according to time as an attribute, e.g. Red-white-blue for t0 -> t. Thanks in advance, Ibrahim -- Ibrahim M. Moustafa, Ph.D. Biochemistry and Molecular Biology Dept. 201 Althouse Lab., University Park, Pennsylvania State University PA 16802 Tel. (814) 863-8703 Fax (814) 865-7927

3 2

Re: [Chimera-users] How to add change to multiple molecules
by CHIU,YEUNG 03 Nov '08

03 Nov '08

Hi Yang You mean adding "charge"? I think you can add charge to all of the models as long as you check the box referred to them at the bottom. If you want to add charge to some models only, you can ~disp all, then display one by one and add charge to them. I hope this would help. Good luck! On Sun Nov 02 20:32:46 EST 2008, zhouyang <zhouyang(a)mail.shcnc.ac.cn> wrote: > Hi > Recently I wanna add change to a series of molecules for DOCK6 > which are stored in a single .mol2 file. It seems that the > Chimera GUI can just add change for one molecules at one > operation. I wonder how to add change to all of them? > Alternatively I just suppose to use 'split' shell command to > seperate these molecules to single files and then add change to > them. Then the key point is whether Chimera can run in > command-line mode so that I can achieve by writing a shell > script? > Thanks in advance > Yang > zhouyang(a)mail.shcnc.ac.cn > > 2008-11-03 ?????? ZHOU Yang > Master Candidate > Drug Discovery and Design Center > Shanghai Institute of Meteria Medica > China Academy of Sciences > 555 Zu Chong Zhi Road , Zhang Jiang Hi-Tech Park, Shanghai, China > (Postcode: 201203) > > Mobile: 86-137-6430-7897 > MSN: zhouyang_pku(a)hotmail.com > _______________________________________________ > Chimera-users mailing list > Chimera-users(a)cgl.ucsf.edu > http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users > Sincerely yours CHIU,YEUNG

3 2

How to add change to multiple molecules
by zhouyang 03 Nov '08

03 Nov '08

Hi Recently I wanna add change to a series of molecules for DOCK6 which are stored in a single .mol2 file. It seems that the Chimera GUI can just add change for one molecules at one operation. I wonder how to add change to all of them? Alternatively I just suppose to use 'split' shell command to seperate these molecules to single files and then add change to them. Then the key point is whether Chimera can run in command-line mode so that I can achieve by writing a shell script? Thanks in advance Yang zhouyang(a)mail.shcnc.ac.cn 2008-11-03 周阳 ZHOU Yang Master Candidate Drug Discovery and Design Center Shanghai Institute of Meteria Medica China Academy of Sciences 555 Zu Chong Zhi Road , Zhang Jiang Hi-Tech Park, Shanghai, China (Postcode: 201203) Mobile: 86-137-6430-7897 MSN: zhouyang_pku(a)hotmail.com

1 0

Fwd: Combining fragments for RESP charges
by Francesco Pietra 31 Oct '08

31 Oct '08

Sorry I used the wrong address for the message below. ---------- Forwarded message ---------- From: Francesco Pietra <chiendarret(a)gmail.com> Date: Fri, Oct 31, 2008 at 8:34 AM Subject: Combining fragments for RESP charges To: chimera-users-request(a)cgl.ucsf.edu I was reading Ross Walker's tutorial A1, in the suite of tutorials for Amber. When deriving RESP charges for an unusual molecule covalently bound to a protein, the unusual molecule is first detached from the protein and then further divided into fragments. RESP charges are derived for the fragments, then the fragments are recombined using Sirius visualization program. The recombined fragments are then attached to the protein, again using Sirius. Can these recombinations be carried out with Chimera? Thanks francesco pietra

2 1

morph-coordinates and camera movements
by Matthew Dougherty 31 Oct '08

31 Oct '08

I was generating a morph of atoms and wanted to rotate the camera 242 degrees on the x axis. I am thinking there may be several ways to do this, such as per-frame script in the morph tool or through the movie recorder script. Is one way better than the other? What would the scripts look like? Thanks, Matt

2 1

directory within Chimera ??
by Barry Lever 30 Oct '08

30 Oct '08

Elaine: I know you are busy .. but as a fairly new user....when I restore a previous session.. can I extract from Chimera, the names of the input data files that were used to create that molecule and subsequent manipulations- I am especially interested to know where I can locate the name of the input geometry file that set up the molecule. In future I will know to include that information in the overall session file name but for now..... Thanks so much Barry -- A. B. P. Lever Distinguished Research Professor Emeritus Chemistry, CB124, York University 4700 Keele St., Toronto, Ont., Canada M3J 1P3 Tel:416-736-2100 x22309 Fax: 416-736-5936 http://www.chem.yorku.ca/profs/lever

3 2

multiple Chimera windows on Mac
by Elaine Meng 30 Oct '08

30 Oct '08

On Oct 30, 2008, at 8:07 AM, Chin-Hsien (Emily) Tai wrote: > > One quick question, is there any way to have several sessions of > Chimera running at the same time so that we can compare/rotate > different domain parsing results of the same structure at the same > time? > Hi Emily, I assume you are using a Mac... Yes, you can have multiple Chimera instances, as many as you want, if you start Chimera from the Terminal window. For example, I have Chimera version 1.2540 installed as /Applications/Chimera2540, so to start it from Terminal I would type: /Applications/Chimera2540.app/Contents/MacOS/chimera Actually I don't really type that because it is too troublesome, and instead have an alias in my home directory .tcshrc file (or .cshrc file). If you don't have either of these files you can just create a file by that name in your home directory and put the alias in it, in my case: alias chimera /Applications/Chimera2540.app/Contents/MacOS/chimera Then after you source that file or log in again, simply typing "chimera" (or whatever you used as the alias) starts Chimera. In a second Terminal window, you can enter "chimera" for a second running Chimera, etc. I have multiple different Chimera versions with different aliases, for example, a recent daily build is on my Desktop: alias chinew ~/Desktop/Chimera.app/Contents/MacOS/chimera Even if you have only one version, you can start it as many times as you want from different Terminal windows. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

scripts in Chimera
by Ben Keshet 29 Oct '08

29 Oct '08

Hi, I am reviewing a large number of structures (docking results). I uses the ViewDock tool which is great and makes life much easier. Still, for every file I open with ViewDock, I repeat the same set of commands before actually reviewing the poses, that is (initially only the receptor structure is open, with only ribbon shown): 1. open the ligands mol2 file. 2. color by element 3. choose atoms within 6A from the ligands (by selecting the ligand, than select zone<6A). 4. show the selected atoms. This is to show only receptor atoms within 6A of the ligand. Is there a way I can "record" this sequence or write some simple script that I could run after opening the ligands mol2 file? Thanks! Ben

2 1