- Chimera-users - RBVI Mailing Lists

WebGL file
by Avnam Ohri 06 Jul '21

06 Jul '21

Hello Chimera Team i have been trying to make a script for looping through a set of pdb files and get WebGL (.html) file as the output import os import chimera import Midas from chimera import exports from chimera import runCommand as rc # use 'rc' as shorthand for runCommand # change to folder with data files os.chdir("E:/files to work/") # gather the names of .pdb files in the folder file_names = [fn for fn in os.listdir(".") if fn.endswith(".pdb")] # loop through the files, opening, processing, and closing each in turn for fn in file_names: rc("open " + fn) rc("ac wb") rc("ac c2") htmlname = fn[:-3] +'.html' exports.doExportCommand("WebGL",htmlname) rc("close") This is the code I have been using in the script , but the output i get is not working , i have been getting 26kb files instead of 3-5 mb files and it doesn't show anything when I open it. can you please help me with the same as i am new to python code

1 0

Volume subtraction of surface area between homology model and template
by Kovacs, Nicholas (CDC/DDID/NCIRD/ID) 06 Jul '21

06 Jul '21

Hello, I have a homology model that I have made and I would like to create a visual that portrays small surfaces where there is change in the solvent accessible surface area of the homology model compared to the template structure. I am trying to use the "subtract" map from map calculation which requires volume data for the 2 structures. I have tried the following to generate volume data and then subtract the volumes, but I am getting hundreds of small surfaces all throughout the area of the molecule: molmap #1 3 molmap #2 3 volume subtract #3 #4 I know molmap is likely not the command I want to be using since I am interested in the solvent accessible surface area but I have yet to find a command that will generate a volume corresponding to the volume enclosed by the solvent accessible surface area. I would greatly appreciate it if someone could help me find a way to create 2 volumes enclosed by the solvent accessible surface area of the 2 structures in addition to correctly configuring the "volume subtract" command to get my desired output. Thank you, Nick

3 3

Webgl, python script for multiple pdbs
by Avnam Ohri 06 Jul '21

06 Jul '21

Hello Chimera Team i have been trying to make a script for looping through a set of pdb files and get WebGL (.html) file as the output. import os import chimera import Midas from chimera import exports from chimera import runCommand as rc # use 'rc' as shorthand for runCommand # change to folder with data files os.chdir("E:/files to work/") # gather the names of .pdb files in the folder file_names = [fn for fn in os.listdir(".") if fn.endswith(".pdb")] # loop through the files, opening, processing, and closing each in turn for fn in file_names: rc("open " + fn) rc("ac wb") rc("ac c2") htmlname = fn[:-3] +'.html' exports.doExportCommand("WebGL",htmlname) rc("close") This is the code I have been using in the script , but the output i get is not working , i have been getting 26kb files instead of 3-5 mb files and it doesn't show anything when I open it. can you please help me with the same as i am new to python code

2 1

Error in using chimera with structureviz2 and cytoscape
by SRUTHI NAMBIAR 30 Jun '21

30 Jun '21

Dear all, I have been using chimera for the past 1 year and recently wanted to club it along with the cytoscape software. But whenever I try to launch chimera through the structureviz app, I get the following message: Error message: Cannot run program "/home/students/chimera/": error=13, Permission denied I have changed the settings of structureviz to give the path of chimera which is /home/students/chimera. Still this error is occurring. Could someone help regarding the same? Thank you. Regards, Sruthi

3 2

how to calculate RMSD
by Elaine Meng 30 Jun '21

30 Jun '21

> On Jun 30, 2021, at 7:19 AM, lufeiyu(a)jlu.edu.cn wrote: > > Dear Sir/Madam: > > I have a question about the analysing of the docking. I docked a peptide to the receptor using GALAXYpepDOCK. The results uncontained the scores of RMSD. Some literatures reorted the UCSF could calculate the RMSD. But I didn't get the way after reading the tutorials. Please help me to figure out how to obtain the RMSD of a docking structure .Thanks vwry much. Best wishes for you. > > sincerely yours > Feiyu Lu Dear Feiyu Lu, The chimera-users(a)cgl.ucsf.edu address is recommended for asking questions about how to use Chimera. I CC'd it here, so you do not need to send your question again. (Or if you are using ChimeraX, you should use chimerax-users(a)cgl.ucsf.edu in the future for asking questions.) An RMSD measures the difference between two different locations of a set of atoms. So in Chimera you would need to open not only the docking results, but also the position of that peptide that you want to use as reference to calculate their RMSD. Then, you can use the "rmsd" command to compare them. I cannot give an exact command since I don't know the model numbers you will have, but an example if you had the comparison peptide open as model #3 and the docking result models are #1.1, #1.2, #1.3 ... then your commands could be: rmsd #3 #1.1 rmsd #3 #1.2 [...] See rmsd command help: <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/rmsd.html> The results would be shown in the Reply Log (open from Favorites menu). Also if you don't know what model numbers you have, look in the Model Panel (also can be opened from the Favorites menu). Model Panel help: <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/modelpanel.html> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Join models function on Chimera
by Azad, Roksana 29 Jun '21

29 Jun '21

Hi There, I hope you are doing very well. My name is Roksana Azad, I am a Ph.D. Student at the CUNY ASRC. I have been working on building a full length model of my protein into a cryoEM map, I have models for individual domain but not for the full lenght structure. I am trying to join the domain models using chimera "join models" function, but unfortunately it's not working for me. I tried everything I could find online about the issue, I used the addh command and kssdssp commands and also tried joining them using other bond instead of C-N, however my button for "apply" always grey and I can't click on it (please see the screenshot attached). I also tried this command "#0:127.A@C #1:1.A@N" according to my model # and atom, but its not selecting anything for me. I tried "combine" it also didn't work.? Please let me know if there is something else I am missing or what else I can do to create this bond or connection between two models. Thank you so much for your time and help in advance - very much appreciated. Sincerely, Roksana ________________________________ Roksana Azad<https://asrc.gc.cuny.edu/people/roksana-azad/> Ph.D. Candidate in Biochemistry & Biophysics Advisor: Kevin H. Gardner<https://kglab.ws.gc.cuny.edu/> Structural Biology Initiative; CUNY Advanced Science Research Center 85 St Nicholas Terrace * New York * NY * 10031 Phone: 212-413-3233 Email: razad(a)gc.cuny.edu

2 1

Stuck in adding residue in the C-terminal of a segment
by Prathit Chatterjee 29 Jun '21

29 Jun '21

Dear Experts, This is regarding adding an ALA residue in the C-terminal of a specific protein domain, with CHIMERA. I have a protein-complex with multiple domains and chains. I want to add an ALA residue (101-th position) in the chain D, after the 100th residue which is PRO. I followed the tutorial and have given the following command in command line: addaa ala,101 :100.d The following outcome was: Couldn’t find ‘O’ backbone atom of PRO 100.D. Request you to kindly let me know what the possible solution could be, so that I add an ALA residue in the C-terminal of Chain D. Thank you in advance, Regards, Prathit Chatterjee

2 4

how to know the net charge of my system
by Sara Luz Gomez Maya 29 Jun '21

29 Jun '21

Dear all, I'd like to know if there is a way to know the net charge of a system when opening the pdb file with Chimera. If so, is it possible to do it by means of the command line? Thanks in advance, Sara

2 2

same chain id while saving large coordinate files
by manikandank 27 Jun '21

27 Jun '21

Hi Chimera-users, Chimera 1.15 (build 42258) puts same chain id for all protein chains present in the pdb during 'save pdb/write pdb' . I am using it in linux Ubuntu. Please help. thank you with kind regards Mani.

2 4

Modeller..Waiting for the Opal server
by Hernando J Sosa 26 Jun '21

26 Jun '21

Dear Chimera, Today when trying to use Modeller through the Chimera interface (via web service) the program either stays forever in Waiting for the Opal server or produces a whole bunch of errors. Trying to run Modeller through the local installation also results in errors. Not sure if the problem is with Chimera or Modeller but one day ago Modeller&Chimera were working fine with the same input files that now are causing the errors (???). Thanks Best Hernando

2 2