- Chimera-users - RBVI Mailing Lists

installing chimera over an older chimera install?
by Sabuj Pattanayek 23 Mar '07

23 Mar '07

Hi, On *nix is it safe to install a newer version of chimera over a previous installation? Will this break something in the newer installation? The reason why I ask is the trouble of maintaining externally installed plugins. We could make a wrapper for the .exe unzipsfx install and re-build symlinks to an external directory of chimera plugins in the share directory, but this seems like too much trouble especially if just installing over an old installation should just "work". Thanks, Sabuj

2 2

Two transparent models and memory leaks
by Thomas Goddard 22 Mar '07

22 Mar '07

C Akey report problems with display of two transparent models and excessive memory use and crashes when saving images. ------------ Tom- Sorry to bother you but I am having serious problems with Chimera while trying to make figures for a paper. After you fixed the sessions number problem, so that they are retained in the same numbered slots from one session to the next, I found that my most recent sessions made with this version, would not work properly when I wanted two different displayed volumes to have transparencies different from 1. This worked in earlier versions and then I started over with a new session, imported everything and it is working again. Maddening. If you have a ribbon within a volume and try to vary the transparency, it almost disappears instead of having a gradual blending effect (see attached figures A,D panels). I am using a PC under XP with 1Gb mem and 512 GB graphics card. I have checked and memory is not the problem. {However, if you quit a session then open another session, Chimera does not give the memory back to the system, so your memory use soars, YOU MUST QUIT BEFORE OPENING A NEW SESSION.} Here is another killer bug: When you record an image full screen, about half the time you get a fatal error in pythonw.exe, it wants you to contact Microsoft and then Chimera crashes losing everything. The error from chimera reads "failed 1073741891" but there is no chance to report the bug. So after battling to get to the point of recording images, the program quits on me about half the time. By the way, when Chimera is shown full screen on our new Linux machine, it doesn't clearly show all the icons on the left hand side of the screen, they are partly occluded. sorry about the bugs but its starting to get to me. cheers C Akey

1 3

New Chimera molecular surface code
by Tom Goddard 22 Mar '07

22 Mar '07

Miguel Ortiz Lombardia asks when Chimera will be able to compute solvent accessible surfaces. -------- Original Message -------- Hi Tom, I would like to know if there has been any advancement in changing the surfaces code. I know you had plans to write your own so that chimera would not rely on msms, and I am very interested in this development because it would allow the use of solvent accessible surfaces apart from molecular surfaces. The former are more appropriate, among other questions, to map electrostatic potential maps (less local effects). I would be happy to test around, if you need testers. Unfortunately my programming skills are quite minimal. But I'll be patient anyway ;-) Thanks to all of you for this great tool! Cheers, Miguel

2 3

MODELLER interface
by Elaine Meng 21 Mar '07

21 Mar '07

Hi Stefano, No arguments here - we have talked about it and I've expressed a need for it for years. The problem is that there are many other features that seem to be at least as high priority, and limited time and manpower available. To name only a few of the things in progress: energy minimization, morphing, interaction with dendrograms (along with sequence alignments), more display preferences, more animation commands, and producing ray-traced images. There is a "model loops" tool that interfaces with MODELLER, but it only produces alternate conformations of loops that are already in a structure. That was implemented because people in the MODELLER (Sali) group here wanted it the most, and it needs work - e.g. currently there is no convenient way to merge a chosen loop conformation back into the structure. Nevertheless, this is another important item and I will share your message to help ensure it does not fall off "the list." I imagine any validation tools would be farther down on the list than the interface for comparative modeling, although we do already have a tool that finds clashes and close contacts. Elaine On Mar 20, 2007, at 10:05 PM, Stefano Ciurli wrote: > Elaine, > > following our discussion on Chimera and DelPhi, and these recent > mails on modeling, don't you think that it would be nice to > interface Chimera to Modeller, as the latter one is one of the most > used software to do homolog modeling? The interface could be a sort > of way to funnel into Modeller the alignment and the structure of > the template(s) for Modeller to use and then read back into Chimera > the results of the modeling, with tools to establish the quality of > the model itself (I am thinking of Prosa, Procheck or WHATIF) > > Regards > Stefano > -- > ____________________________________________ > > Stefano Ciurli > Professor of Chemistry > Laboratory of Bioinorganic Chemistry > Department of Agro-Environmental Science and Technology > University of Bologna > Viale Giuseppe Fanin, 40 > I-40127 Bologna > Italy > Phone: +39-051-209-6204 > Fax: +39-051-209-6203 > > http://www.cerm.unifi.it > http://www.isa.unibo.it/ISA/ > > "Fatti non foste a viver come bruti, > ma per seguir virtute e canoscenza" > Dante Alighieri - Inferno - Canto XXVI > > "Ihr seid bestimmt, nicht Tieren gleich zu leben, > Nein, Tugend zu erringen und Erkenntnis" > "Ye were not form'd to live the life of brutes, > But virtue to pursue and knowledge high"

1 0

sequence & structure in Chimera
by Elaine Meng 20 Mar '07

20 Mar '07

Hi Abhijit, If I understand correctly, there were two questions here: > One more question is it possible to take a protein sequence of a gene, > part of which is cloned, crystallized and 3d structure is available, > and superimposes the protein sequence with the reported crystal > structure? Or how can you model a protein sequence to generate a > putative structure, for the part that hasn’t been crystallized so far, In Chimera, (1) can you associate a structure with a sequence that is read in from a separate file? short answer: yes, if that sequence is in an alignment (2) can you do comparative modeling (create a 3D model of an unknown structure starting from a known structure that is thought to be similar)? short answer: no, except simplistic replacement of a few side chains with the command "swapaa" I'll start with #2: Chimera does not do comparative modeling or threading different sequences on a known structure. Besides the approaches mentioned by Eric (getting a model from MODBASE or using the MODELLER program to make the model yourself), listed below are several web servers that might be useful. I believe the first two replace side chains while the others perform more complete modeling (can handle insertions/deletions and adjust the backbone). It's been a while since I used any of these, however, so you should read any author-provided information. - SCWRL server http://www1.jcsg.org/scripts/prod/scwrl/serve.cgi - Maxsprout server http://www.ebi.ac.uk/maxsprout/ - ModWeb server (requires registration) http://alto.compbio.ucsf.edu/modweb-cgi/main.cgi - RAPPER server (registration encouraged) http://mordred.bioc.cam.ac.uk/~rapper/ - PSIPRED server http://bioinf.cs.ucl.ac.uk/psipred/ - Swiss-Model server http://swissmodel.expasy.org//SWISS-MODEL.html Now question #1. You already saw the Sequence tool, which shows the exact sequence of any peptide or nucleotide chains in structures open in Chimera. However, you might want to read in a sequence from a separate file and associate it with the structure to allow the same kinds of crosstalk (a selection on the sequence selects the structure and vice versa). You can do that, if you have an alignment of that sequence with one or more additional sequences. These other sequences don't need to have any structures, and your sequence of interest does not have to match the structure exactly to associate with it (often there are point mutations, or the sequence is for a close homolog of the structure, or the structure is missing a few residues here and there, or is only one domain from the whole sequence). Here's a list of the sequence alignment formats that can be read (you can just use File... Open in the Chimera menu): http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#alignment and the "Sequence-Structure Association" section in this page may be useful: http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/ multalignviewer/framemav.html I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

Motion callback functions
by Tom Goddard 20 Mar '07

20 Mar '07

Hi Karin, I've attached some example Python code that monitors the motion of models in Chimera. It registers an OpenState trigger. For your case you might update the color on your plane when the plane moves but the map does not move. Let me know if more details would be helpful. Tom Karin Gross wrote: > Hi Tom, > > i have a question concerning rotation and translation of surface models in > chimera. > I want the user to be able to rotate/translate my plane via mouse, but run the > computation of coloring and do the coloring during the movement. > Is it possible to register a python callback for this, and get the > rotation/translation information? > > Thanks > -Karin > > # ------------------------------------------------------------------------------ # Example code that monitors the motion of models in Chimera. # # Each Chimera Model object has an openState attribute whose value is an # OpenState object. The OpenState object has attributes xform, active, # cofr (center of rotation), bbox (bounding box). These are defined in the # Chimera C++ header file OpenModels.h. (Chimera C++ headers can be downloaded # from http://www.cgl.ucsf.edu/chimera/sourcecode.html) # # This example code monitors changes in the OpenState objects for all models. # class Monitor_Motion: def __init__(self): from chimera import triggers h = triggers.addHandler('OpenState', self.xform_changed_cb, None) self.handler = h def xform_changed_cb(self, trigger_name, call_data, trigger_data): if 'transformation change' in trigger_data.reasons: # The transformation matrix of some model has changed. from chimera import openModels mlist = openModels.list() # All open models. for open_state in trigger_data.modified: models = filter(lambda m: m.openState == open_state, mlist) if models: names = ', '.join(map(lambda m: m.name, models)) print names, 'moved' print open_state.xform def stop_monitoring(self): from chimera import triggers triggers.deleteHandler('OpenState', self.handler) self.handler = None # ------------------------------------------------------------------------------ # mm = Monitor_Motion()

1 0

Electrostatic coloring on slice surface
by Tom Goddard 20 Mar '07

20 Mar '07

Hi Boaz, When you color a surface (e.g. GRASP surface) using electrostatic potential with the Surface Color tool it does show the correct colors on the slice if you are clipping the surface. This is described in the guide to volume data display http://www.cgl.ucsf.edu/chimera/tutorials/volumetour/volumetour.html#colorc… The colors are only assigned at the triangle vertices of the slice surface which can be seen by switching to "mesh" display in the Surface Capping dialog. To get finer resolution coloring increase the "Mesh subdivision factor" in the Surface Capping dialog from 1.0 to say 3.0 (giving ~9x more vertices). Press the Enter key after changing the number to see the effect. Tom Boaz Shaanan wrote: > Hi Tom, > > Thanks a lot. While we're at it I have another question related to > surface rendering. In the 'colour surface' window there is button that > says 'colour sliced ...'. Does that mean that if I covered a molecule > with surface and mapped a Delphi calculated potential map onto it, if > I then slice into the molecule, the surface covering this slice will > show the potential correctly ? That would be very nice but I'm just > wondering whether I can believe what I see. Grasp used to do this > nicely but I'd like to use chimera (and grasp is dead anyway as far as > I'm concerned - I don't have SGI's). I'd appreciate your input. > > Cheers, > > Boaz

1 0

Re: [Chimera-users] pdb-l: structure based sequence alignment
by Eric Pettersen 16 Mar '07

16 Mar '07

Hi Sona, Before getting to your question, just wanted to mention that the post you quoted isn't accurate anymore: Chimera can incorporate structureless sequences into alignments as of the last production release (October). Once you have a structure-based alignment (or any alignment really) showing in Multalign Viewer you can add sequences to it using MAV's Edit menu. I don't know of any non-madness-inducing way in Chimera of superimposing 50+ ligands without writing a script. There are two kinds of scripts you could write. One is a text file containing the exact same commands you would type at Chimera's command line. You would give the file a suffix of .com or .cmd and open it using File...Open or the "open" command. The other type is a Python script, also a text file, which requires a little bit of learning but offers the ability to use loops -- quite helpful in this scenario. A Python script file would have a .py suffix and can be opened the same way as a Chimera-command script. For purposes of the example scripts below, I'm going to assume the ligands have the same residue name (FMN in the example), that there is only one occurrence of the residue per file, and the ligand atoms have the same name. PDBs you want to use that don't match these criteria you could do by hand -- hopefully there would just be a few. On the assumption that you have a mix of NMR and crystallographic structures, the script will delete hydrogens, yielding a heavy-atom only RMSD (probably a good idea anyway if there are any methyl groups). Lastly, I'll assume you have a reference structure to match onto already open in model #0 before you run the script. The Chimera-command script would be something like this: open 1jhf; del H; match #1:FMN #0:FMN; close 1 open 1kef; del H; match #1:FMN #0:FMN; close 1 open 1rd9; del H; match #1:FMN #0:FMN; close 1 etc. For the Python version I'll make one further assumption: that you have the PDB IDs listed in a file named "pdbs". The Python version would be: from chimera import runCommand # use runCommand to execute Chimera commands f = open("pdbs", "r") # open file containing PDB IDs for line in f: # read through file pdbID = line.strip() # remove trailing newline from text runCommand("open " + pdbID + "; del H; match #1:FMN #0:FMN; close 1") f.close() # close file The indentation for the lines that follow the "for" statement indicate that they are to be executed as the loop. The lack of indentation for the f.close() indicates that it is not part of the loop -- it is executed once the loop finishes. --Eric On Mar 15, 2007, at 6:54 PM, Sona Vasudevan wrote: > Hello Eric, > > Have a few questions about Chimera. I would like to superimpose > just the ligands bound to complexes. In this case I would like to > basically get a rms deviation of 50+ ligand co-ordinates (same > ligand from different PDBs). I now Chimera's match could do it but > is there a way a easier way to superimpose ligands? > > Thanks! > > Sona > > > On 2/6/06, Eric Pettersen <pett(a)cgl.ucsf.edu> wrote: > Hi Sona, > UCSF Chimera (www.cgl.ucsf.edu/chimera) can certainly > construct a > structure-based sequence alignment, but can't incorporate > structureless > sequences into the alignment so maybe it's not what you're looking > for. > But just in case, here are the URLs for Chimera's Match->Align tool > (which creates the alignment) and MatchMaker tool (which superimposes > structures): > > http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/matchalign/ > matchalign.html > http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/matchmaker/ > matchmaker.html > > --Eric > > Eric Pettersen > UCSF Computer Graphics Lab >

1 0

Problems using Collaboratory
by slaton 13 Mar '07

13 Mar '07

Hi, Having some problems using Collaboratory mode. Some scenarios: 1. When attempting to host a collaboratory session between linux hosts on the same subnet, with another linux box running the hub, no one can join the session. I get the error connecting that suggests checking your firewall settings. None of the machines have iptables running, and since they are on the same subnet that should rule out border router/firewall issues. 2. If using a Mac OS X machine (PPC) to run the hub -- on a different subnet than the linux boxes, but within the same building -- the first linux box can join the hub. A second linux box on the same subnet fails with the same error as in 1) above. This can be replicated every time. Neither linux boxes are running iptables or any other firewall, they have nearly identical hardware and are running the same distro/version/patchlevel. 3. If the MOSX box (where the hub is running) now joins the session with the 1st linux box, they can chat with each other and see either others' pointers. However if the connected user on the linux box opens a model (for my tests, i used a SPIDER volume), the connected user on the MOSX box cannot see it. An error pops up on the linux box reading: "Error processing trigger: "Camera": AttributeError: '_chimera.Camera' object has no attribute 'viewDistance' Rotating/moving the model on the linux box triggers this error on the MOSX box: "Error processing trigger: "collaboratory": ValueError: unopen model Additionally, while sending chat messages from the MOSX box works, it also throws errors like this: "Error processing trigger; "Chat command": TclError: invalid command name ".38462968.47381600.47395144.47395584....[etc] 4. If i reverse scenarios here -- hosting on Linux and joining from MOSX (and the host machine) -- the results are nearly the same. Each user can chat and see the other's cursor, but as soon as one user loads a model it starts throwing errors like the ones mentioned above. After which, chat mode no longer works. So.....any known problems with collaboratory in this release, or any tips on troubleshooting these problems? All tests were performed using Chimera snapshot release 1.2352, i386 version (linux) and X11 version (MOSX). thanks slaton Slaton Lipscomb Nogales Lab, Howard Hughes Medical Institute http://cryoem.berkeley.edu

1 0

Re: [Chimera-users] Chimera - Question
by Elaine Meng 13 Mar '07

13 Mar '07

Hi Peter, No problem - the features are documented, but there is no tutorial that includes adding a sequence. I tested the following with the most recent snapshot (1.2352, March 2007). (1) Open your sequence alignment in Chimera. I just found the following problem when testing the procedure: *if you created the sequence alignment with Match->Align, it is necessary to save it to a file (File... Save As from the Multalign Viewer menu, pick any format), quit from the alignment, and reopen it in Chimera (File... Open in the main menu) before you can add a sequence to it* ...this will be fixed in the next release, however. If the sequence alignment was already read from a file, no extra step is needed. (2) Choose "Edit... Add Sequence" from the Multalign Viewer menu and paste the new sequence in the dialog. Enter a name for the sequence, adjust the alignment parameters as desired, and click OK. Look at the alignment and decide whether it seems reasonable. If not, you can use "Edit... Delete Sequences/Gaps" to remove the sequence and try realigning it with "Edit... Add Sequence" and different alignment parameters. For example, if the sequence is fairly distantly related to the others, you may have better luck with blosum-30 than blosum-62. Editing is described here http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/ multalignviewer/multalignviewer.html#editing (3) If they are not already open, open one or more structures that associate with the sequence alignment. (4) Once your new sequence is aligned with the others to your satisfaction, you can draw out boxes on the alignment using the mouse. If the boxes enclose parts of the sequence(s) that are associated with the structure(s), the corresponding parts of the structures will be highlighted (selected). Or, you can go the other direction by selecting parts of the structures and seeing where they are in the alignment. These forms of crosstalk are described here http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/ multalignviewer/multalignviewer.html#crosstalk and in the "Sequences and Structures" tutorial. You can also show the secondary structure assignments on the alignment with "Structure... Secondary Structure... show actual" (for those sequences associated with structures) or "show predicted" (for sequences without structures) Alternatively, if you already have a sequence alignment that includes your sequence of interest plus others that will associate with structures, you can just open them all in Chimera and skip straight to #4. Sometimes I get alignments from databases such as Pfam. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html On Mar 13, 2007, at 2:27 PM, Peter Murphy wrote: > Thanks for the quick response Dr. Meng, > > Thanks to your helpful tutorial, I now know how to align two > structures and get an alignment. But I am interested in the ability > to add a sequence (that > doesn't have a structure) to the alignment and see if/where parts > of it map onto the structures. Is there such a tutorial on your > website, or might you be able to give me a quick rundown :P > > Thanks again > > -- > Peter Murphy, B.Sc., M.Sc Candidate > Atlantic Research Center > Dalhousie University > Halifax, Nova Scotia, > Canada

1 0