- Chimera-users - RBVI Mailing Lists

superimposing proteins on co-factor
by Boaz Shaanan 09 Mar '06

09 Mar '06

Hi Chimera prople, If I want to superimpose proteins on their co-factors (or part of them), is ensembleMatch the way to go or are there other ways to do this ? I'd appreciate your advice. Regards, Boaz -- ************************************************************* Boaz Shaanan, Ph.D. Associate Prof. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 e-mail:bshaanan@bgu.ac.il Fax: 972-8-647-2992 or 972-8-646-1710 *************************************************************

3 2

Re: [Chimera-users] (no subject)
by Eric Pettersen 09 Mar '06

09 Mar '06

On Mar 8, 2006, at 2:22 PM, Todd T Talley wrote: > Hay, > Sorry to bother you, but you were so helpful last week > I thought that I would try again. Is there a way to show the > carbonyl of the backbone of a specific residue? I would like to > show the H bond between my ligand and a specific Trp. Well, the vanilla answer is (if we're talking about residue 12.A for example) "disp :12.a@c,o". However, I'm guessing that the reason you've undisplayed the carbonyl in the first place is because you're showing a ribbon -- in which case there are a few more useful things to know. By default the ribbon depiction replaces the backbone atoms (including the carbonyl oxygen) so even if you turn the display of specific backbone atoms back on (e.g. with the above "disp" command), no atoms will be shown. However, Chimera will know that these atoms are now "displayed" and will begin to show things such as H-bonds that involve those atoms (drawing the end of the H-bond to the interpolated ribbon position of the backbone atom). You can force backbone atoms to be explicitly depicted even in the presence of a ribbon with the "ribbackbone" command (e.g. "ribbackbone :12.a") -- they will be shown at their normal non-interpolated positions. --Eric

1 0

Question on Chimera
by Seiha Thorng 06 Mar '06

06 Mar '06

To whom it may concern, My name is Seiha Thorng and I work for BioMarin Pharmaceuticals, Inc. I'm looking into UCSF Chimera as a promising software for our research purposes. I would like to ask you what equipment you would recommend for optimal performance of this software. The answer I'm looking for is in terms of ram, platform, processor, disc space ....etc. We would like very much to be able to run this program at the best possible performance. Thank you. Seiha This message is intended only for the confidential use of the intended recipient(s). If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message and any attachments. Any unauthorized disclosure, copying, or distribution of this message (including the attachments), or the taking of any action based on it, is strictly prohibited.

3 2

Re: [Chimera-users] Show me the disulfides!
by Eric Pettersen 03 Mar '06

03 Mar '06

Todd Talley writes: > Hay, > > I am sure that this is a dumb problem BUT I am unable > to “turn on” the disulfide bonds in my structures. They are a > crucial part of the structures that I am publishing and I really > would like to use Chimera to render the images for our publication > but I am not a code guy and none of the combos I have tried > worked. If anyone is out there with the answer please let me know! > > Thanks! Deposited PDB structures specify disulfide linkages using CONECT records, which Chimera honors. So one way to go is to add such CONECT records to your structures. CONECT records are documented here: http://www.rcsb.org/pdb/file_formats/pdb/pdbguide2.2/part_69.html You can also add the linkages directly in Chimera. If you select a pair of sulfurs that should have the linkage, then the command "bond sel" (Favorites->Command Line) will add the linkage. Sessions and PDB files that you save thereafter will have the linkage information (i.e. a saved PDB file will have the appropriate CONECT record). If you have a lot of disulfide bonds or a lot of structures, I could send you a short Python script to add the linkages automatically. --Eric Eric Pettersen UCSF Computer Graphics Lab pett(a)cgl.ucsf.edu http://www.cgl.ucsf.edu

1 0

delphi in chimera
by Thomas Goddard 03 Mar '06

03 Mar '06

Hi Damien, Chimera Delphi Controller tries to execute the command-line program "delphi" so it must be in your shell executable search path. On Linux you need it in the directory containing the delphi executable in the PATH environment variable. On the Mac I'm not sure how to set the search path when you start Chimera by double clicking on it. You can still set the shell PATH variable and start Chimera from a terminal like: % path-to-chimera/Chimera.app/Contents/MacOS/chimera The Chimera User's Guide (under Tools / Delphi Controller) says that Delphi Controller does not work on Windows. Maybe it is easier to just edit the line in Delphi Controller code that starts delphi. Just edit line 97 in chimera/share/DelphiViewer/DelphiExecutor.py changing from cmd = "delphi %s > %s" % (self.prmFileName, self.outputFileName) to for example cmd = "/usr/local/bin/delphi %s > %s" % (self.prmFileName, self.outputFileName) giving an explicit path to the Delphi executable. On the Mac this file would be Chimera.app/Contents/Resources/share/DelphiViewer/DelphiExecutor.py Keep the indentation of the Python line the same as this is important. All that said, I would suggest just running Delphi yourself then opening the resulting *.phi file in Chimera. The Delphi Controller Chimera tool was written by a summer intern 5 years ago and has not been worked on much since then. The electrostatic potential file produced by MolMol is not in Delphi format. It uses a MolMol specific format (described at the end of this email) that Chimera does not read. You could hand convert it to another text file format by changing the header, to say the one used by APBS (called OpenDX). But I'd suggest calculating the electrostatic potential with APBS instead. Tom ------- Manual page for MolMol potential file format. NAME ReadPot - read potentials for surface coloring SYNOPSIS ReadPot fileName DESCRIPTION Read a file with potentials, these are used for coloring surfaces. The file must contain values on a grid, the format is: x0 xSize xInc y0 ySize yInc z0 zSize zInc val val val .... where x0, y0, z0 (float) are the coordinates of the grid origin, xSize, ySize and zSize (int) are the sizes of the grid in each dimension, and xInc, yInc and zInc (float) the spacing between two grid points in each dimention. This must be followed by xSize * ySize * zSize values (float), where the x-coordinate is the one that is running the fastest. The potentials will be set for all selected surfaces, but the PaintSurface command has to be given to update the colors. EXAMPLE ReadPot /home/joe/struct/my_pot.dat SEE ALSO CalcPot, AddSurface, SelectPrim, PaintSurface DATE 960509 > From: Damien Devos <damien(a)salilab.org> > Date: March 2, 2006 4:04:02 PM PST > To: "Eric Pettersen (chimera)" <pett(a)cgl.ucsf.edu> > Subject: delphi in chimera > > hi Eric, > i'm trying to use delphi in chimera, but couldn't get the delphi > controller to help me. > alternatively, i used molmol to generate the .phi file and tried to > open > it in chimera, but i got this message on the reply log: > > > Done opening /viol1/damien/fgf/molmol/1nuna.pdb > Opening /viol1/damien/fgf/molmol/1nuna.phi > /viol1/damien/fgf/molmol/1nuna.phi: Record size 539833144 > file size > 2725332 > Done opening /viol1/damien/fgf/molmol/1nuna.phi > > it seems that my .phi file is too big? does this make sense? > on the other side, if i could get the delphi controller to work on > chimera, that would solve all problems. we have delphi installed > localy, > but i don't know where to put the path of it and how so that chimera > could locate it. > > thanks > d > > -- > Damien Devos > Andrej Sali Lab > California Institute for Quantitative Biomedical Research > University of California at San Francisco > QB3, Box 2552 > 1700 4th Street, Room 501 > San Francisco, CA 94143-2552 (CA 94158 for courier delivery), USA > Phone: +1 (415) 514-4258 > Fax: +1 (415) 514-4231 > Email: damien(a)salilab.org > URL: http://www.salilab.org >

1 0

plotting RMSD vs Residue number
by Isherwood, James 02 Mar '06

02 Mar '06

Hi, I was wondering if there was a way to use chimera to calculate Root Mean Squared Deviations for individual residues or backbone atoms. In order to produce a graph showing the relative freedom of different areas of a protein. James Isherwood

2 2

3D Graph
by Jake Chrzanowski 02 Mar '06

02 Mar '06

Hi, I've been reading about the program your working on,Chimera, and was wondering if it had the functions I need for a project I'm working on: I'm trying to create a 3D graph to represent an image and the distance that image is away from a source. I was looking at your Chimera program to do this. I was wondering if your Chimeraprogram had the necessary functions I needed to do this? If so, can you point me in the right direction on what the functions I need would be? Below I described a little more in depth of what I'm trying to do. First, I'll give you a little detail on our overall project so you have a better idea of what I'm dealing with. We're trying to measure the distance of an object using two cameras. Two identical cameras are positioned near each other with a separation distance and focusing angle. The Image-Processing Computer applies filters to conform the images so that meaningful features stand out in contrast to non-meaningful features (i.e. shadows, textures, glare, and reflections). The computer uses a vast array of image-processing algorithms to find key features in the images. Cross-correlation is performed between the features in both images to determine the line-of-site angle and separation distance. With that found, triangulation is performed to determine the distance that an object(s) is away from the cameras. ------------------------------------- Now, once we have determined the distance, we want to have a 3D graph display the object's distance away from the camera (part where I'd like to use Chimera), as they come into focus. (i.e. The graph will be continually updating at 10 frames/sec along with the cameras) I have attached a general 3D graph .bmp file to show you kinda what I'm looking for. (Obviously, the graph won''t portrude negative as the .bmp file since the camera only look in one direction) What I'm thinking is I will basically take in two parameters. 1) The coordinates of the edge detected (horizontal and vertical pixel location). Edges won't be detected in the entire area ( i.e. a wall focused in too closely will ideally show no edges). The graph will only be concerned with areas that edges were detected. 2) The other parameter that needs to be taken in is the computed distance from the cameras of the detected edge. This is the parameter that will determine how far the graph protrudes out in the z direction. Ideally, I would like for portions of the graph to change colors corresponding to a certain distance detected (i.e. 0-1 feet red, 1-2 feet orange, etc...). Also, something that isn't needed (but would make the graph look a lot better), is if I could use some interpolation functions so areas that were encompassed by edges would protrude out, too, instead of just the edges. Sorry about the length of this email. I just wanted to give you a good idea of what I'm looking for. I also attached a picture (" picture2.bmp") that had gone through an edge detection program. The white lines are detected edges. Everywhere else in the image now has a pixel intensity of 0. I'm looking for a library to help me accomplish all or most of these things listed with the 3D graph. I am an amateur at computer programming , so the simpler the better (I'm an electrical engineering major, we don't get a chance to learn too much about how to program). Anything you can help me with I would really appreciate. Thanks a lot for your time and I'll look forward to your response. -- Sincerely, Jacob Chrzanowski Electrical Engineering Student, NDSU jmchrz(a)gmail.com (701) 866-3120

2 1

movies of gromos files
by John Robinson 01 Mar '06

01 Mar '06

Trying to visualize gromos trajectories. The Tk popup is asking for three files: Topology, Coordinates, and PROMD. I don't seem to be giving it the files it needs. What are the file extensions corresponding to these file types? (.top, .trr, .tpr)? Thx, -------------------------------------------- John M. Robinson, M.D., Ph.D. mailto:johnmrobinson@mac.com

2 1

selection of atoms on the surface of a molecule
by kovzany＠go.com 28 Feb '06

28 Feb '06

Dear All, Is there an easy way to select and save set of atoms (with their names and coordinates) representing VdW or solvent accessible surface of the given molecule? thanks, PK

2 1

MTZ files
by Eran Shacham 28 Feb '06

28 Feb '06

Hey there, I am not sure if this question should go into users or developers but I will first try here. Accept my apologies if this does not concern you and maybe you could fwd this email to someone who could help me out. I am looking to convert MTZ files into ccp4 map files (using Python). Is there an extension of Chimera that allows that? Can you please point out some documentations about the issue? Thanks in advance for your help and time, Eran.

2 1