- Chimera-users - RBVI Mailing Lists

ViewDock in script
by Moustafa, Ibrahim M. 19 Jun '20

19 Jun '20

"re-sending question to the right bb" Dear All, I'm trying to run ViewDock, in Chimera, from a script using the following command in a loop: runCommand("viewdock " + filename + " AutoDock") It works fine. However, the ViewDock window remains opened after reading each file. For large number of files it is not practical to close them manually. Is there a command to close the opened ViewDock windows to add to the script? Thank you for your help. Ibrahim

1 0

Saving volume surface in IMOD .mod
by Long Gui 18 Jun '20

18 Jun '20

Dear all, I was trying to save the surface data of a mrc file in Volume Viewer as the IMOD file type .mod so that it would be read in IMOD. I have searched but could only find the following link about opening IMOD .mod file in Chimera: https://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/volumeviewer/imod… But I want to do the reserve operation. Is that possible that we could generate and save the surface data in Chimera and let it be read by IMOD? Thanks a lot, Long Gui, Ph.D. Postdoc Researcher, Nicastro Lab University of Texas Southwestern Medical Center Long.Gui(a)utsouthwestern.edu Tel: (214)-645-1561 ________________________________ UT Southwestern Medical Center The future of medicine, today.

2 1

Modeller function and MD function in Chimera 1.14
by ‍성열승(대학원학생/일반대학원 약학과) 18 Jun '20

18 Jun '20

Daer whom it may concern, Hello, I am a graduate student trying out several features in Chimera for structure prediction. I write to you due to repeated problem during my use of Chimera function. I currently made a slight alteration in one residue of my protein. I have named it as a another residue, other than an amino acid. Then, I tried going to Modeller function so that the program will predict some energetic difference resulting in a structural modification. However, whenever the function ends, my helices and beta sheets are all converted into loop regions.Therefore, I only selected the loop region of my protein and made it go through the Modeller. Now, the modification was only shown in the loop area, but my alteration in an amino acid residue has been cut off. The residue was nowhere to be seen. I guess the Modeller made it go away. Next I tried selecting all the loop regions except the residue that I made the change and started Modeller, hoping that the altered residue will not be cut off. However, I got a result of it getting cut off again. Overall my question could be summed up into the following three: 1. Is there any way making Modeller function to have my altered residue not changed but have the program go through? 2. Is there a way for refining my protein in the helices and beta sheets area? Modeller function seem to change all of those into loops, and showed excellent prediction in the loop region. 3. Do you recommend any other function for my purpose? I built a PTM residue into one of my amino acid and want to see some predicted structure alteration. Thank you so much for your time. I really think the Chimera software is awesome and I just need to get used to it and try to learn some tricks. I hope to hear from you soon. Yours sincerely, Yulseung Sung -- 성열승 연세대학교 약학대학 암대사연구실 (Yulseung SUNG) (Lab of Cancer Metabolism, College of Pharmacy, Yonsei University) 연세대학교 약학대학 인천광역시 연수구 송도과학로85, 연세대학교 국제캠퍼스 진리관D 317-3호, 암대사연구실 College of Pharmacy, Yonsei University 317-3 Veritas D, 85 Songdogwahak-ro, Yeonsu-gu, Inchoen, 406-840, South Korea

2 2

Managing window visibility through scripts?
by Martti Tolvanen 05 Jun '20

05 Jun '20

Hi, I have made scripts in which various models are rendered by mavConservation taken from different alignments. As the scripts proceed, the multialignment viewer windows remain at the front, and I haven't been able to figure out how to bring the main molecular graphics window back to the front (except by clicking). I am aware that the problem would go away if I made the whole thing into a movie, but I would like to run the script in our research group meeting and leave the displayed models available for manual rotations. Are there commands to bring windows behind or in front of other Chimera windows? I run the production version of Chimera 1.14 under Windows 7. Part of my code follows. #single chains of ca6, ca9, ca12, and ca14 as #0-3, superimposed by mmaker, and their copies as #4-7 tile #0-7 columns 4 range kdHydrophobicity min cyan 0 white max maroon novalue green #0-3 open ca6.fasta range mavConservation 0.1 dodger blue 0.55 white 1 orange red novalue green #4 open ca9.fasta range mavConservation 0.1 dodger blue 0.55 white 1 orange red novalue green #5 open ca12.fasta range mavConservation 0.1 dodger blue 0.55 white 1 orange red novalue green #6 open ca14.fasta range mavConservation 0.1 dodger blue 0.55 white 1 orange red novalue green #7 surface #0-7 & protein Cheers, -Martti -- Martti Tolvanen Lecturer in Bioinformatics U of Turku, Finland

2 3

Bottom menu is super small
by h k 04 Jun '20

04 Jun '20

Dear Sir/Madam, I have installed *Chimera-1.14-win64.exe* on my laptop (Windows 10) in order to work on the protein structures. The structures look good, but the bottom menu is super tiny as I can’t see the buttons there at all ! Please look at the following picture (red arrow on that) and let me know how can I solve this issue? I tried different compatibilities by changing High DPI Scaling Override. In this way, I can increase the size of bottom menu but it adversely affect the quality (resolution) of protein structure images! Please help me with this issue. Thank you, Haniyeh [image: image.png]

2 1

Multifit waiting too long for Opal server response
by André Graça 04 Jun '20

04 Jun '20

Hi, I am using Multifit for the first time and wondering if a few hours are not long enough to wait for a server response. The task panel shows from the beginning the status as 'waiting for response from Opal server'. I read on the paper (2011) about Multifit that "The typical running time is about 20 min for assemblies with tens of thousands of atoms", which is the case. I wonder if it is not running yet and it is queued in the server, or if it takes a long time depending on anything that I might have set up wrongly. Could anyone help me to figure this out? Thank you, André Graça

2 1

How to know the cut-off used in ensemble cluster?
by Ibrahim Mohamed 01 Jun '20

01 Jun '20

i am using MD movie to cluster my Molecular Dynamics results. how can i know the cut-off used by chimera to do this? i know that it depends on the data itself, but how can i know this cut-off for specific data? Thanks

2 1

Need instructions how to do MD simulations of Protein-ligand complex using Chimera
by P Srivastava 01 Jun '20

01 Jun '20

Dear Chimera Team I Need instructions on how to do MD simulations of Protein-ligand complex using Chimera. Please give me in details. With regards, Pratibha Srivastava प्रतिभा श्रीवास्तव Scientist वैज्ञानिक Bioprospecting Group जैव पूर्वेक्षण समूह Agharkar Research Institute आघारकर अनुसंधान संस्थान Pune, India पुणे, भारत

2 1

(no subject)
by Preantha Poonan 01 Jun '20

01 Jun '20

Good afternoon, I am writing to you regarding an error I am experiencing with working with Chimera. When I begin the docking process the following appears: Service 'opal:vina_1.1.2 is unavailable . See Reply Log for more details. Kindly assist. Preantha Poonan Sent from Mail for Windows 10

2 1

Conversion of Chimera session .py file to Pymol .pse file
by Joanna Smietanska 01 Jun '20

01 Jun '20

Dear UMSF Chimera Users, I would like to ask how to convert Chimera session .py file into .pse Pymol format? I have a few saved Chimera sessions, my approach was to save protein coordinates in .pdb format and subsequently read them in Pymol 2.0 to save as Pymol session, but during this procedure all informations about specific colouring of chains and other settings are lost. May I ask about possibilities for direct import Chimera .py files into Pymol without losing saved settings? I would be very grateful for any help and advice. Best regards, Joanna Smietanska

2 1