- Chimera-users - RBVI Mailing Lists

adding measurement to Angles/Torsions via command line
by Ryan Pavlovicz 28 Jun '18

28 Jun '18

Hi, Is there a way to add a torsion measurement to the Angles/Torsions table via command line so that i can create a .com file to more easily analyze multiple measurements upon opening my session? The best workaround I can think of is to just use the 'angle' command followed by 'start Reply Log'. Thanks, ryan

3 3

Re: [Chimera-users] Display errors
by Elaine Meng 28 Jun '18

28 Jun '18

Hi Ahmad, To summarize for the others: this is not a display error but missing secondary structure information. The reason is that the multiple-model single-PDB format is technically only for multiple coordinate sets of the same set of atoms (like an NMR ensemble), and there is only one set of helix/strand information at the top of the file that is used for each of the models. Chimera includes only the information from the first model when writing the file. In your case, although the two models look like copies of each other, they actually have some different chain IDs. In the new single file, your second model is mostly lacking this information. As I mentioned before, you can simply calculate helix and strand after opening the file: ksdssp However (and you might not care about this anyway), the assignments might be slightly different than in the original files. If you want to keep exactly the original secondary structure assignments , the better way to make a single PDB file is to combine the two models into one model before saving. You can combine models using the Model Panel (open from Favorites menu): choose both models on the left, then click “copy/combine” on the right, or with the “combine” command, for example: combine #0,1 model #2 close true and then save only the new combined model (#2) to a PDB file. I hope this helps, Elaine > On Jun 28, 2018, at 11:01 AM, Ahmad Khalifa <underoath006(a)gmail.com> wrote: > > Thanks a lot Elaine. I would appreciate you taking a look at my structures. Please find it in the attachments. > > Kind regards. > > On Thu, Jun 28, 2018 at 12:51 PM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > Hi Ahmad, > I do not have this problem when I just open two structures and save them as a single PDB. When I reopen the saved PDB it shows all the secondary structure of both structures. > > When you save make sure you are saving all of the atoms (do not use options “Save displayed atoms only” or “Save selected atoms only”). Other than that, I don’t have any idea what happened with your file, without seeing that file. You could send (attach) it to e-mail. You could send to just me if you don’t want to put it on the list. > Regards, > Elaine > > > > On Jun 27, 2018, at 5:30 PM, Ahmad Khalifa <underoath006(a)gmail.com> wrote: > > > > I open the structures in the first image, which have the secondary structures displayed correctly. I click file save pdb as single file.That's the process I follow to save the file. How can I fix it? > > > > On Wed, Jun 27, 2018 at 4:54 PM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi Ahmad, > > I don’t what process you used to save the structures in a single file, so I don’t know what went wrong. All I can tell from your images is that in the bottom image, some of the copies do not have secondary structure assignments, and that is why they show up as thin “coil” ribbon instead of the wider helix and strand ribbon. It might be that something is wrong about the format of your single file, or that some of the backbone atoms are missing. If you don’t think there are missing backbone atoms, you could try command “ksdssp” to reassign helix and strand, but the assignments probably won’t be exactly the same as from the original PDB file. > > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/ksdssp.html> > > I hope this helps, > > Elaine > > ----- > > Elaine C. Meng, Ph.D. > > UCSF Chimera(X) team > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > > > > On Jun 27, 2018, at 8:24 AM, Ahmad Abdelzaher <underoath006(a)gmail.com> wrote: > > > > > > Hello, > > > > > > After saving the two side by side structures in a single file, I get the weird display errors in the picture shown below. How can I fix that? > > > > > > Regards. > > > <before_saving.png><after_Saving.png> > > > > > <A9_padded.pdb><A10_padded.pdb>

1 0

Display errors
by Ahmad Abdelzaher 28 Jun '18

28 Jun '18

Hello, After saving the two side by side structures in a single file, I get the weird display errors in the picture shown below. How can I fix that? Regards.

3 3

(no subject)
by Ahir Pushpanath 27 Jun '18

27 Jun '18

Dear Chimera Team/Users, I wanted to write a python script within chimera that aims to essentially print out a contact map of a selected chunk of residues on an open structure. However, before doing so, I wondered if there is any programmatic way to generate the rotamer library at every position (i.e when you open up the rotamer tool, you get an option of 5-6 conformations you can pick for a residue), I wanted to generate that for every residue in the protein programmatically (and save every rotamer possibility) (as an altlocation?) in the crystal structure. Only after that do I want to calculate the contact map, in essence, I am trying to be as expansive as possible for each residue's "possible" contacts with any other, taking into account the full rotamer ensemble. Any tips on how to manage this programmatically? -- Dr. Ahir Pushpanath* PhD.* Senior Biologist, Johnson Matthey.

2 1

Chimera bug report submission
by Bharat Reddy 27 Jun '18

27 Jun '18

Is it possible to view more than three volumes in the volume viewer window? Whenever I open more than three, the least recent density contouring disappears. I can always go to the data tool bar and select it, but it gets teadious when you are juggling 4+ volumes classes and trying to observe the difference between them. Cheers, BR File attachment: volume_viewer.png

2 1

SASA calculation per residue
by Andrew Macrae 25 Jun '18

25 Jun '18

Hello Chimera developers, I'm trying to calculate sasa scores for a list of individual residues in chimera and cant quite get it. Ive tried commands and the define attribute menu. The command ive been using is 0.23:23/areaSAS I've used similar things but I don't know what Im missing. Thanks for any help. Cheers, Andrew MacRae UCSC

2 2

Exporting STL/COLLADA/OBJ with textures
by Healey, Joe 25 Jun '18

25 Jun '18

Hi, Is it possible for Chimera to somehow export the textures/colour mappings of the models when saving the scene as a .dea/.obj/.stl? At the moment I can export the models, including surfaces (with correct transparency) but I haven't found an option for texturing/colouring? Cheers Joe Joe Healey M.Sc. B.Sc. (Hons) MRSB PhD Student MOAC CDT, Senate House University of Warwick Coventry CV47AL Mob: +44 (0) 7536 042620 | Email: J.R.J.Healey(a)warwick.ac.uk Jointly working in: Waterfield Lab<http://www2.warwick.ac.uk/fac/med/research/tsm/microinfect/staff/waterfield…> (WMS Microbiology and Infection Unit) and the Gibson Lab<http://www2.warwick.ac.uk/fac/sci/chemistry/research/gibson/gibsongroup/> (Warwick Chemistry) Twitter: @JRJHealey<https://twitter.com/JRJHealey> | Website: MOAC Page<http://www2.warwick.ac.uk/fac/sci/moac/people/students/2013/joseph_healey> | ORCID: orcid.org/0000-0002-9569-6738

3 4

Structure measurements
by Healey, Joe 23 Jun '18

23 Jun '18

Hi Chimera Team, Is there a quick/automatic way to determine the largest dimensions of a model (maybe its minimal bounding box or similar?) without having to select 2 atoms specifically to draw the distance between? Thanks Joe Joe Healey M.Sc. B.Sc. (Hons) MRSB PhD Student MOAC CDT, Senate House University of Warwick Coventry CV47AL Mob: +44 (0) 7536 042620 | Email: J.R.J.Healey(a)warwick.ac.uk Jointly working in: Waterfield Lab<http://www2.warwick.ac.uk/fac/med/research/tsm/microinfect/staff/waterfield…> (WMS Microbiology and Infection Unit) and the Gibson Lab<http://www2.warwick.ac.uk/fac/sci/chemistry/research/gibson/gibsongroup/> (Warwick Chemistry) Twitter: @JRJHealey<https://twitter.com/JRJHealey> | Website: MOAC Page<http://www2.warwick.ac.uk/fac/sci/moac/people/students/2013/joseph_healey> | ORCID: orcid.org/0000-0002-9569-6738

2 1

Movie render issue
by BuddySphinx 23 Jun '18

23 Jun '18

Dear Chimera developer, I tried to use the animation to make movies. However, after recoding the output movie could not be seen (Can play but nothing shown). I was wondering what could be the issue? Thank you, Yangqi Sent from Mail for Windows 10

2 1

different docking scores with SDFs and SMILES
by Kerr, Kelly E (HSC) 22 Jun '18

22 Jun '18

Hello, I have really enjoyed using your incredibly comprehensive and user-friendly program. I cannot overstate how much I appreciate it. I'm encountering a discrepancy though that I can't explain. It probably shows a lack of basic understanding on my part, but I would be grateful if you could help me figure this out. I have not been able to find 3D structure files for all of the ligands I'd like to run, so I have been using Chimera to build structures from the canonical SMILES presented on PubChem. I have also been using Chimera to minimize these structures. In order to be sure that the structures are completely minimized I've used the following... Steepest descent steps 1000 Steepest descent step size 0.02 Conjugate gradient steps 10000 Conjugate gradient step size 0.002 I ran this minimization and then AutoDock Vina for both the SDF and SMILES-built versions of several ligands. Both versions came from the same page (I was using PubChem) and both versions seemed to get minimized completely (the minimization outputs ended with many rows of RMSDs of zero). I'm confused that I'm getting different energy values (both initial and after minimization) for the two versions and I'm getting slightly different docking results as well. * Is it expected that SMILES and SDF files of the same chemical should have different energy values even after minimization? * Would you recommend using Zinc (aromatic) SMILES to build structures instead of the canonical smiles on PubChem? OR would you recommend using PubChem CIDs instead of SMILES? Thank you so much in advance for your time and guidance. Best regards, Kelly Kerr

2 1

ChimeraX won't start on Ubuntu 16.04
by Petr Leiman 21 Jun '18

21 Jun '18

Dear ChimeraX users and Developers, ChimeraX v. 0.5 or 0.6 would not start on our stock Ubuntu 16.04 machines. The error message is as follows: This application failed to start because it could not find or load the Qt platform plugin "xcb" in "". Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, xcb. Reinstalling the application may fix this problem. Fatal Python error: Aborted Current thread 0x000014f406ce7740 (most recent call first): File "/usr/local/lbbs/chimerax/current/lib/python3.6/site-packages/chimerax/ui/gui.py", line 93 in __init__ File "/usr/local/lbbs/chimerax/current/lib/python3.6/site-packages/ChimeraX_main.py", line 485 in init File "/usr/local/lbbs/chimerax/current/lib/python3.6/site-packages/ChimeraX_main.py", line 788 in <module> File "/usr/local/lbbs/chimerax/current/lib/python3.6/runpy.py", line 85 in _run_code File "/usr/local/lbbs/chimerax/current/lib/python3.6/runpy.py", line 193 in _run_module_as_main Aborted (core dumped) A few more errors while checking for missing libraries (ldd) of ChimeraX-supplied libqxcb.so, libqxcb-glx-integration.so or libqxcb-egl-integration.so /usr/lib/x86_64-linux-gnu/libQt5Core.so.5: version `Qt_5.9' not found /usr/lib/x86_64-linux-gnu/libQt5Core.so.5: version `Qt_5' not found /usr/lib/x86_64-linux-gnu/libQt5XcbQpa.so.5: version `Qt_5_PRIVATE_API' not found /usr/lib/x86_64-linux-gnu/libQt5Gui.so.5: version `Qt_5' not found /usr/lib/x86_64-linux-gnu/libQt5Gui.so.5 Do I need to do a system-wide replacement of Qt5 for a different flavor (OpenGLES)? Thanks, Petr

2 1

来自pengweiyucas的邮件
by pengweiyucas 21 Jun '18

21 Jun '18

Dear sir: I want to know how to show the disulfide bond ? Thank you !

2 1

extract parts of a map based on 'volume data gradient norm'
by Dieter Blaas 18 Jun '18

18 Jun '18

Hi, I want to segment a map based on differences in 'volume data gradient norm' which I can adjust as to color the part of the volume I am interested in in blue and the one I want to get rid of in red. Is there a way of doing so? I admit that I never used the segger tool and do not know whether it would be appropriate for this task. The final aim is it to write out the blue volume! Thanks for hints, bw, Dieter ------------------------------------------------------------------------ Dieter Blaas, Max F. Perutz Laboratories Medical University of Vienna, Inst. Med. Biochem., Vienna Biocenter (VBC), Dr. Bohr Gasse 9/3, A-1030 Vienna, Austria, Tel: 0043 1 4277 61630, Fax: 0043 1 4277 9616, e-mail: dieter.blaas(a)meduniwien.ac.at ------------------------------------------------------------------------

4 6

one more suggestion in chimera
by GLY 15 Jun '18

15 Jun '18

dear Eric I sorry to trouble you. Could you just give a more function in Distances of structure analysis, please? When count the distance, we must select 2 atoms exactly. For example, use the command 'select #0:2@CA #1:3@CA' and then click create button, so that we will get the distance between the CA of residue 2 in model 0 and the CA of residue 3 in model 1. HOWEVER, if we type 'select #0:@CA #1:@CA', we can't get all the distances between all CA in model 0 and all CA in model 1! :( So, how about just adding one function, so that the Create button could count serial distance? Maybe it will just be 2 buttons, one for 'select #0:@CA' and the other for 'select #1:@CA'. I am sorry to trouble you, and many thanks. best wishes! Guo NOTE: Maybe you recommend me multiple distance! But I try a lot, such as 'measure distance #0:@CA #1:@CA multiple true'. This command just result the minimum distances between all CA in model 0 and CA in model 1, not all distances! In addition, I see the site 'http://www.cgl.ucsf.edu/pipermail/chimera-users/2014-May/009922.html', <http://www.cgl.ucsf.edu/pipermail/chimera-users/2014-May/009922.html',> too. I am sorry, it doesn't work for we don't know how small the overlap should be. (the smaller overlap, the more contacts would be detected)

2 1

Nucleotide Mutagenesis in Chimera
by Elhajjajy, Shaimae Imane 14 Jun '18

14 Jun '18

Hello, I am trying to mutate nucleotide residues in RNA using Chimera, and I've seen previous posts about using the "swapna" command. However, Chimera is giving the error message "Unrecognized command: swapna". Is there a way for me to enable swapna for Chimera to recognize so that I may use it? Thank you, Shaimae

2 1

Showing/Hiding/Fading
by Gustaf Olsson 14 Jun '18

14 Jun '18

Hello Chimera users and developers, I’m back again. So my movie rendering is progressing though I have of course run into more problems. I have one PDB file open, I need to create a surface around one molecule that is close to other molecules so running the surface command directly does not work as intended. I therefore have to split the PDB file and calculate a surface around a single molecule. All is well, however after this I run into some problems trying to clean up the script. I assume that I am defining the modelID incorrectly though I cannot figure out how. The following works: split #0 atoms :17.het surface probeRadius 0.5 vertexDensity 20.0 :17.het coulombic -5 red 0 white 5 blue :17.het wait combine #0.1-2 modelId 0 close true surftransparency 100 #0.1 This splits the model putting one residue (17) in a separate model, I calculate the surface without issue, color it by coulombic charges. I then have to combine the models (the single residue (17) and the rest of the residues) and close the old “residue 17” model. I then need to hide the newly created surface to display it at a later point in the movie. The script above works, however this does not seem very neat. I have experimented with different other commands, including transparency transp 100,s #0.1 Which also works well, as long as I split and combined the models. However, I have to combine the model for this to work! split #0 atoms :17.het surface probeRadius 0.5 vertexDensity 20.0 :17.het coulombic -5 red 0 white 5 blue :17.het wait combine #0.1-2 modelId 0 close true surftransparency 100 #0.1 Everything but hiding the surface works. transp 100,s #0.1 This does not work either in this case. I am assuming that I am not defining the model ID correctly for the surface and this is why I cannot hide it? I also tried using surfcat: surfcat templ :17.het surf probeRadius 0.5 vertexDensity 20.0 templ coulombic -5 red 0 white 5 blue templ wait surftransparency 100 templ or any of the following: surftransparency 100 #0 surftransparency 100 :17.het surftransparency 100 #0:17.het transp 100,s #0 Hides the created surface, what am I doing wrong in defining the surface to hide it and show it again? Thank you for any input and best regards // Gustaf

2 6

select a specified residue
by 张征锋 14 Jun '18

14 Jun '18

Dear Sir, It is nice to use the amaizing software of UCSF Chimera. I can select a kind of residue such as all 'SER's and label them, while I am able to select a specified number of residue, such as the 200th residue 'Ser'. Could you please show me how to do with this? Thanks a lot. Best, zhengfeng ------------------ Zhengfeng Zhang School of Life Science Central China Normal University. NO.152 Luoyu Road, Wuhan,Hubei, P.R.China 430079

2 2

Symmetry operation calculations for multimeric fibrillar assemblies
by Einav Tayeb-Fligelman 13 Jun '18

13 Jun '18

Dear Chimera support team, I am trying to deposit to the PDB an X-ray crystal structure I solved, and came across with the need to calculate its biological assembly, which is pretty tricky in my case, and so I wondered if Chimera could help me with that. I am working on fibrils made out of repeating units of peptides. The asymmetric unit in my structures usually contains only a monomer, whereas the structure of the fibril is obtained by drawing the copies of this monomer along the fibril axis (potentially there are tens of thousands of those copies), based on the unit cell parameters (the copies are packed within the unit cell). After choosing and drawing an arbitrary number of copies along the axis of fibrillation I would like to get the output of the symmetry operations resulting in this desired representation of the fibril, in order to deposit them as the biological assembly of my structure. I would appreciate if you could advice me to how to obtain those symmetry operations so to define my biomt. Thank you in advance, Einav -- Einav Tayeb-Fligelman, PhD The Landau lab Faculty of Biology Technion, Israel Institute of Technology Haifa, Israel E-mail :einavtf@campus.technion.ac.il Tel at the lab:+972-77-8871964 <+972%2077-887-1964>

2 4

make helical filament model using command sym
by Yaowang Li 13 Jun '18

13 Jun '18

Dear all, I have built a model from cryo-em density map, now I am going to create a model of a filament (have a length of the pitch, over 1000 A) from it. I think the command 'sym' can do it, but not easy for me. I have tried many times. sym #0 group h,rise,twist,100 or sym #0 group c2*h,rise,twist,100 coord #1 or sym #0 group h,2.292,179.6,100 coord #1 the model is wrong I also try to measure the symmetry first and sym #0 group #1 it is almost right, but I need much longer, how set it? using the 'n' parameter? and how? and if I want to set rise and twist myself, how to do it? Best wishes, Yaowang

2 1

FindHBond tool not finding H-bonds with sulfur?
by Gustavo Seabra 13 Jun '18

13 Jun '18

Hi there, I’m trying to use the findHBond tool to count Hbonds in a system. However, I noticed ti does not find any HB involving sulfur atoms in my system. I’ve put together a simple example system here to show what I mean. After opening the files, I do: 1. Select the ligand (Select > Residue > LIG) 2. Tools > Surface/Binding Analysis > FindHBonds 3. Find These Bonds: Both 4. Relax H-bond constraints: (I tried even relaxing to 1A and 30deg, with no change) 5. Select “Only find H-bonds with at least one end selected” 6. Hit Apply. Chimera does find some HBonds involving nitrogen and oxygen, but no HBond is found involving the sulfur atom on the ligand, even though there is a serine (Ser525) close enough to make a HBond to the ligand S atom. So, I wonder what I am doing wrong here? Am I skipping any steps? I have checked in a different program (PoseView) and it can find the bond with no problem. Thank you very much, -- Gustavo Seabra

2 2

Fading structures/surfaces in/out
by Gustaf Olsson 12 Jun '18

12 Jun '18

Making a movie using a CMD script I am using something like the following to fade structures in/out transparency 95 :17.het; wait 8 transparency 90 :17.het; wait 8 transparency 85 :17.het; wait 8 transparency 80 :17.het; wait 8 transparency 75 :17.het; wait 8 transparency 70 :17.het; wait 8 transparency 65 :17.het; wait 8 transparency 60 :17.het; wait 8 transparency 55 :17.het; wait 8 transparency 50 :17.het; wait 8 transparency 45 :17.het; wait 8 transparency 40 :17.het; wait 8 transparency 35 :17.het; wait 8 transparency 30 :17.het; wait 8 transparency 25 :17.het; wait 8 transparency 20 :17.het; wait 8 transparency 15 :17.het; wait 8 transparency 10 :17.het; wait 8 transparency 5 :17.het; wait 8 transparency 0 :17.het; wait 8 Is it possible to use the “frames” function in transparency to achieve the same? Assuming that transparency is set to 100% and I want to fade in of course. transp 0,a :17.het frames 160 Best regards // Gustaf

2 1

making a movie of sliding through contours
by Pranav Shah 10 Jun '18

10 Jun '18

Dear Developers, Would it be possible to make movie clips of electron density map at different density thresholds in chimera. Cheers, Pranav -- Pranav Shah Postdoctoral Research Fellow. Hogle Lab Department of Biological Chemistry and Molecular Pharmacology, Building C2 - First Floor 240 Longwood Avenue Boston, MA 02115 (617) 432-4360 (fax) (617) 432-3839 (lab)

2 2

scolor filament (geometry cylindrical)
by René Frank 08 Jun '18

08 Jun '18

Hello People, I would like to surface colour a filament within an EM map using cylindrical geometry (scolor geometry cylindrical). However, the electron density of the filament does not lie perfectly on the x, y or z axis. Is there a way of using two marker points placed at each end (on the longitudinal axis) of the filament to define the orientation of the cylindrical geometry and scolor the filament accordingly? My attempts to do this whilst executing the following command didn’t seem to work: scolor #0 geometry cylindrical axis sel cmap 5,gold:10,red:15,blue Many thanks for any suggestions/help, R. ====================== Dr René Frank ======================

2 1

Re: [Chimera-users] Question Regarding on Finding Distances
by Tom Goddard 05 Jun '18

05 Jun '18

Hi Padua, Search online to find how to update your Windows graphics driver. Unfortunately for old laptops, there may not be any new graphics driver. Tom > On Jun 5, 2018, at 1:01 PM, Xiong, Padua L wrote: > > Hi Tom, > > After following what you have said, under the Gathered Information provided from the Bug Report Dialog I have found: > > OpenGL Vendor: Microscoft Corporation > OpenGL Renderer: GDI Generic > OpenGL Version: 1.1.0 > > Because everything is listed as you have said, I can see that this problem is occurring because of the graphics driver. > > Thank you so much for your fast response. > > Padua > > From: Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> > Sent: Tuesday, June 5, 2018 1:48:07 PM > To: Xiong, Padua L > Cc: chimera-users(a)cgl.ucsf.edu <mailto:chimera-users@cgl.ucsf.edu> > Subject: Re: [Chimera-users] Question Regarding on Finding Distances > > Probably your graphics driver is not adequate. You can check what driver Chimera is using with Chimera menu Help / Report a Bug under “Gathered information” it will list OpenGL Renderer and Version. If it says Microsoft GDI 1.1 then you are using 1990s graphics and Chimera won’t do selection. You would need to update your driver. > > Tom > > >> On Jun 5, 2018, at 12:26 PM, Xiong, Padua L wrote: >> >> Hi there, >> >> My name is Padua and I'm an undergraduate research assistant working on pharmacogenomics. To do this, I have been using your program UCSF Chimera. >> >> I've been trying to find the distances between a protein and a drug but keep running into problems with selecting an atom in the graphics. When I try doing Ctrl-click or Shift-Ctrl-click to select an atom, I don't select anything at all (nothing is highlighted green as its supposed to when something is selected). >> >> My professor I'm working under has tried changing the mouse settings as well. Is there something I'm missing that's not listed in the User's Guide and tutorials? >> >> Much thanks, >> >> Padua >> _______________________________________________ >> Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> >> Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users <http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users>

1 0

Question Regarding on Finding Distances
by Xiong, Padua L 05 Jun '18

05 Jun '18

Hi there, My name is Padua and I'm an undergraduate research assistant working on pharmacogenomics. To do this, I have been using your program UCSF Chimera. I've been trying to find the distances between a protein and a drug but keep running into problems with selecting an atom in the graphics. When I try doing Ctrl-click or Shift-Ctrl-click to select an atom, I don't select anything at all (nothing is highlighted green as its supposed to when something is selected). My professor I'm working under has tried changing the mouse settings as well. Is there something I'm missing that's not listed in the User's Guide and tutorials? Much thanks, Padua

3 2

Atom Specification not working in exported PDB
by Gustaf Olsson 04 Jun '18

04 Jun '18

Hello again Chimera Users So now that I have the “movie” command working decently, it turns out that I cannot export a PDB file from my MD simulation and retain the ability to select by residue or atom number. PDB files generated by other software (PACKMOL, AMBER) works fine though when I exported a PDB file from a fram in an AMBER MD simulation using chimera, I can open the file, I can select using residue names though trying to refer to atom or molecule numbers does not work. To be clear, the exported PDB file contains multiple molecules and solvent, all ar present and the file loads though trying to run commands like show :17 ~show @536-593 Affects EVERY atom and molecule in the system when it should only affect residue 17 (by specifying residue number OR all atoms in that residue). Using the show :XXX works as intended though this affects all residues XXX and I only want to affect residue 17. Am I doing something wrong or can I solve this in a simple way? Best regards // Gustaf

2 4

Place marker at centre of volume box python command
by Kyle Morris 01 Jun '18

01 Jun '18

Hi Chimera dev, Is there a python command to place a marker at the precise centre of a volume’s box, regardless of the centre of mass of the volume in the box? I have played with creating dummy volumes and measuring their centres but it’s clunky and got a bit stuck with doing this. A single command would be cleaner, if it’s possible. As always thanks for your help! Best wishes, Kyle

2 3

Command line syntax questions
by Divita Mathur, Contractor Code 6910, FN 01 Jun '18

01 Jun '18

Hi I am trying to write an alias and am curious if I can do the following using command line (in order to include them in the alias): 1. Separate chains that belong to the same model – can I change the model # on a single chain from an existing model? For example, I built a DNA duplex, selected one chain (sel :.A) and tried to change the model # (combine sel model 8 close true) but the new model also includes chain B. 2. Change residue number of a residue in a chain. I combined a small molecule to a DNA chain between residues 18 and 19, but after combining, the molecule’s residue number remains 1. I would like to change it to 19 or 18. 3. Following point #2, I also want to assign the new molecule the same chain ID – A. In the pdb file, the chain ID is blank for the newly inserted molecule. Thank you for your help. I also want to mention that the Chimera user discussion portal has been very helpful otherwise! Best, -- Divita Mathur Postdoctoral Research Fellow Center for Bio/Molecular Science and Engineering Naval Research Laboratory Washington DC 20375 (202) 767-0687 (Office) divita.mathur.ctr.in(a)nrl.navy.mil

3 7

Recording a movie of an MD simulation
by Gustaf Olsson 31 May '18

31 May '18

Hello everyone First time posting, looking for some advice. I have an MD simulation that was produced with the AMBER software package and I want to record a movie (MP4) file of the simulation. I wanted to use a CMD file and not go through the GUI since this would be a step in a series of steps and I was also hoping to perform some “in movie” modifications to the structure though I quickly ran into a huge issue, the frame rate. So basically i tried something like this: movie record size 3840,2160 format png supersample 3 coordset #0 1,-1 wait 10 movie stop movie encode output /Users/guolaa/Desktop/Arbete/Konferenser/MIP2018/Presentation/myMovieFolder/mdSimulationBox.mp4 format mp4 quality highest >From this I received what looked like a single frame of “movie”. This seemed very strange to me since I assumed that this would be 500 PNG images resulting in a 20 second movie at 25 fps. It seems I’m missing something in the process since MD iterations, frames and frame-rates does not seem to match up. I’ve gone through the documentation regarding maxFramerate, movie, coordset and so forth and I can’t work out a decent strategy. I have 500 iterations (MD-frames) loaded, I want to record a smooth 10 seconds (-ish) long MP4 movie file covering the entire range of MD-iterations (first frame to last frame though not necessarily every frame in between) and I want to do this in a CMD script and not using the GUI menu system since I plan to do more things while recording at some point (manipulating representations). Thank you in advance for any input, best regards // Gustaf

2 4

chimera clear selection
by Brian Ondek 29 May '18

29 May '18

Hi chimera help,I have been using chimera and find it extremely useful. I was finding particular protein sequences within my structures and hit clear selection under the select tab.Now whenever I try and find a seq, it wdoes not show up and "selection cleared" appears in the bottom right corner of the window. I tried to reboot and the issue persists.Interestingly I can still see amino acid and chain selections just fine.How can I undo this "clear selection" issue I inadvertently caused? Thank you in advance for your help.Brian Ondek

2 1

Interface residues in domain-domain contacts
by IDIGO Nwamaka 29 May '18

29 May '18

Hi, I am quite new to chimera. I was wondering how I can locate interface residues in different domains within the same protein model. For example, my protein has 3 domains and I want to find out the interface residues for the different domains. Thanks! Amaka Idigo PhD Student www.ed.ac.uk/centre-genomic-medicine<http://www.ed.ac.uk/centre-genomic-medicine> Centre for Genomic & Experimental Medicine<http://www.ed.ac.uk/centre-genomic-medicine> www.ed.ac.uk University of Edinburgh Centre for Genomic & Experimental Medicine The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336.

2 1

Surface mesh and coloring queries
by Bala subramanian 29 May '18

29 May '18

Dear Chimera friends, Good day. Please enlighten on the following queries, a) I would like to know if I can write the surface mesh calculated within chimera to a file. From the documentation of the surface command, it seems that it is not possible. My idea is to have the vertices and faces as outputs to be fed to a plotting tool aimed for webpage display. Please guide me if this is possible or the related source code I can modify to have the output. b) How does chimera color surfaces, for instance, coulombic surface. What I am not understanding is the way the surface colors are interpolated to atomic charges. I would like to adopt the method for my plotting purpose. Thanks in advance, Bala -- C. Balasubramanian

2 1

display vectors
by Michał Kadlof 24 May '18

24 May '18

Hi, I'm running MD simulation and I would like to display forces vectors "live". My strategy is to run: MD Movie -> PerFrame Script -> In this script create a shape (cone), and update it every frame. I transformed my vectors into ration axis and angle, and run it. However it works extreamly slow, and even lowering quality of cone didn't help. Do you have any clues? Here is how my script looks like: #1: close #1; shape cone radius 0.2 height 3.051701874476991 center :47 divisions 10 color red rotation 1.003198923120698,-0.8433298543660601,-0.5373867542336597,180 #2: close #1; shape cone radius 0.2 height 3.054021942152826 center :47 divisions 10 color red rotation 1.0022878678774028,-0.8433406134841704,-0.5373745205242975,180 #3 ... -- pozdrawiam serdecznie Michał Kadlof <m.kadlof(a)cent.uw.edu.pl>

2 3

coot/chimera model-map misalignment
by Gabriel Brandt 23 May '18

23 May '18

Hi. I've always been able to work around this problem, but I do often have to work around it, so I was wondering whether there's an easier way. Let's say I open a PDB file in Coot and export the map that it generates from the mtz file. If I attempt to open this ccp4-formatted map in Chimera, the coordinates appear to transformed so that the model and map are wildly misaligned in space. Normally, I work around this problem by using the map-generating feature in Phenix, which generates a model and map that align in Chimera. However, in this case, I'm trying to compare the maps that Coot generates on the fly to the those produced by Phenix, so it would be nice to be able to export a map from Coot and open it in Chimera. Thanks very much. gsb ………………………………... Gabriel Brandt Assistant Professor Department of Chemistry Franklin & Marshall College PO Box 3003 Lancaster, PA 17604 ph: 717.358.4846 shipping address: 415 Harrisburg Ave Lancaster, PA 17603 ………………………………...

3 4

volume viewer ranges
by Tamas Hegedus 22 May '18

22 May '18

Hi, I have a .map file. If I open it in chimera, volume viewer indicates a range (-0.133 - 0.235 Level: 0.018 (in a textbox)), which range is different from the min and max values of data in the map file (read by python mrcfile). The chimera's range is narrower. - why is that? - I can imagine that chimera apply some cutoff; if this is the case, how can I display the full range of the .map file? Thanks, Tamas -- Tamas Hegedus, PhD Senior Research Fellow MTA-SE Molecular Biophysics Research Group Hungarian Academy of Sciences | phone: (36) 1-459 1500/60233 Semmelweis University | fax: (36) 1-266 6656 Tuzolto utca 37-47 | mailto:tamas@hegelab.org Budapest, 1094, Hungary | http://www.hegelab.org

2 1

Fitting structures in biological assembly surfaces
by Ahmad Abdelzaher 22 May '18

22 May '18

Hello, I have a structure that generates a surface of the biological assembly. How can I fit this surface with my structures? Regards.

2 1

Re: [Chimera-users] [chimera-dev] Visualize 3D structure of Peptide
by Elaine Meng 22 May '18

22 May '18

Dear Reza, This is not really a Chimera question. You would need to go to the Protein DataBank website and search there. Their searching is powerful and has many options, which you can explore: <https://www.rcsb.org/#Category-search> Another way is to search for your protein of interest at UniProt, then see if there are PDB IDs given in the structures section for that protein. UniProt: <http://www.uniprot.org/> If there isn’t a known structure in the Protein DataBank, other possibilities are to: (A) look in databases of comparative models, e.g. ModBase, from which you can download a PDB file to open in Chimera <https://modbase.compbio.ucsf.edu/modbase-cgi/index.cgi> (B) build comparative model yourself if the structure of a similar protein/peptide is known <https://en.wikipedia.org/wiki/Homology_modeling> <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/multalignviewer/m…> (C) if it’s a pretty small peptide, build from scratch, but still difficult to know if the conformation is realistic without more work (dynamics etc.). For example, Chimera allows you to build peptides (Tools… Structure Editing,... Build Structure; the Start Structure section includes a “peptide” option). <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/editing/editing.h…> Finally, the chimera-dev e-mail address is for programming questions. If you have user questions, for future reference the better address is chimera-users(a)cgl.ucsf.edu (CC’d on this message). Good luck, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On May 21, 2018, at 10:25 PM, Mohammadreza Behi <m.behi(a)sydney.edu.au> wrote: > > Dear Sir/Madam, > I am trying to visualize a peptide and a protein using Chimera, yet I am not sure if the peptides may have an ID to fetch the structure by ID. > Even I could not find the ID for my protein. > Can you please let me know how I may find the ID for these items? Or if there is not any ID how to visualize them for further studies? > Kind regards, > Reza\

1 0

Hidden capability to compute all bonds on a per-frame basis
by benjamin.horsman＠alumni.ubc.ca 20 May '18

20 May '18

Hello, A 2014 message to chimera-users mentioned that "There is also a hidden capability in Chimera to compute all bonds on a per-frame basis." (http://plato.cgl.ucsf.edu/pipermail/chimera-users/2014-April/009759.html) Could someone please elaborate on this? Does this functionality still exist is recent versions of Chimera, and has it been documented anywhere? My requirements are just that - to catalogue all (hydrogen) bonds over every frame in a trajectory. Thank you, BGSH

2 1

chimera options opening in tabs and not windows
by Pranav Shah 18 May '18

18 May '18

Dear Developers, I have somewhat of a strange problem with chimera where, different options of the program open into tabs in the same window as opposed to having their own windows. While this is mildly irritating especially when I am using the volume viewer to change the contour level of the map and not being able to visualise the changes in the map as they appear, what gets my goat is that the options/prgorams become unavailable to access when i pull the tab out into its own window. I know this isnt a chimera problem as i have the same issue with other python based programs such as imod and eman. Would you know where i can tweak the preferences so that the programs do not open in tabs but their own independent windows? I appreciate your assistance. Cheers, Pranav -- Pranav Shah Postdoctoral Research Fellow. Hogle Lab Harvard Medical School 240 Longwood Avenue Boston, MA 02115 (617) 432-4360 (fax) (617) 432-3839 (lab)

2 2

Calculating screw transformation between two protein subunits
by Nikita Chopra 17 May '18

17 May '18

Hi I have two protein subunits, which I have aligned along the z-axis. I am considering both the subunits as rigid bodies. Is there a way I could find the screw transformation (rotation along z-axis and displacement along xy plane) between them in chimera ? Thank you for your help.

2 1

Volume viewer levels question
by Markus Heller 15 May '18

15 May '18

Hi all, I have an issue displaying a map file that I opened using the insightgrid.py script. When displaying the grid at the highest level I can get, the levels are still too low, but when I set the levels higher by typing something into the level field (e.g. 1.2e+03 instead of the 1e+03), the levels disappear altogether as shown in the second screenshot. As soon as I adjust the slider, the levels reset to 1e+03. What am I doing wrong? Thanks Markus [cid:image001.png@01D3EC35.74E6A210] [cid:image004.png@01D3EC35.9B86A230]

2 3

insightgrid.py
by Markus Heller 14 May '18

14 May '18

Hi all, I'm looking for a copy of Tom's insightgrid.py script, referenced here: http://www.cgl.ucsf.edu/pipermail/chimera-users/2014-March/009651.html If somebody could let me know how to get hold of a copy, that'd be great! Thanks and Cheers Markus

2 4

query about splitting volumes using local resolution criterion
by Banavali, Nilesh K (HEALTH) 14 May '18

14 May '18

ResMap, a program that calculates local resolutions for cryoEM maps, also provides a chimera script to visualize the local resolution. This script opens Volume #0 (cryoEM map), and colors its regions using the values from Volume #1 (ResMap-generated file) as follows: open #0 example_map.mrc open #1 example_map_resmap.mrc volume #1 hide scolor #0 volume #1 cmap 3.00,blue:5.00,cyan:7.00,green:9.00,yellow:11.00,orange:13.00,red I was wondering if there is a way to generate split maps based on the resolutions stored in Volume #1 instead of just coloring the original map. Alternatively, is there way to play with the transparency of the regions with specific resolutions stored in Volume #1. The goal is to separate low resolution regions from the higher resolution regions in the original map to be able to better understand/annotate the accuracy of atomic models that are generated based on the map. I tried to look for ways to do this using 'volume', 'scolor zone', and 'vop' options, but was unable to make any progress. Any help would be greatly appreciated. Thanks, Nilesh

2 1

Regarding saving image in chimera nogui
by NAGARAJAN 14 May '18

14 May '18

Hi all, I have to use chimera --nogui and do the following 1. load a structure 2. make Surface representation 3. Color surface of selected residues with a selected color 4. save image Any idea how to do the 4 steps in chimera --nogui? Thank you

3 8

tiling multiple chain structures
by Healey, Joe 11 May '18

11 May '18

Hi chimera team, Sorry for pestering you again so soon! Very quick question though. If I have a couple of structures on screen which are made up of multiple PDBs, is there any way to tile them, but as groups? e.g. if I have one complex A-B-C, and another X-Y-Z, that I group into Group1 and Group2, I'd like to tile group1 and group2 next to each other. The tile command, as far as I can tell, is only capable of tiling A B C X Y Z as seperate models though (unless I went through the process of saving them all as a single PDB first). Is there any way to do this without the hassle of saving and reloading? Many thanks! Joe Joe Healey M.Sc. B.Sc. (Hons) MRSB PhD Student MOAC CDT, Senate House University of Warwick Coventry CV47AL Mob: +44 (0) 7536 042620 | Email: J.R.J.Healey(a)warwick.ac.uk Jointly working in: Waterfield Lab<http://www2.warwick.ac.uk/fac/med/research/tsm/microinfect/staff/waterfield…> (WMS Microbiology and Infection Unit) and the Gibson Lab<http://www2.warwick.ac.uk/fac/sci/chemistry/research/gibson/gibsongroup/> (Warwick Chemistry) Twitter: @JRJHealey<https://twitter.com/JRJHealey> | Website: MOAC Page<http://www2.warwick.ac.uk/fac/sci/moac/people/students/2013/joseph_healey> | ORCID: orcid.org/0000-0002-9569-6738

2 2

Re: [Chimera-users] saving new position of the model (map saving)
by Elaine Meng 10 May '18

10 May '18

Hi Dmitry, You need to specify two maps, the one you are sampling and the one whose grid you are sampling on, e.g. vop resample #0 onGrid #1 This means map #1 with the desired grid must already exist. As mentioned in that link, you could create it with “vop new” <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/vop.html#resample> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/vop.html#new> You can show outline boxes indicating axis orientation with the data display options in Volume Viewer or “volume” command, and move models separately by specifying model to move with the “models” option of “turn” (or “roll”) or with the mouse after freezing some models by unchecking their “A”ctive buttons in the Model Panel. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On May 10, 2018, at 11:56 AM, Dmitry Semchonok <semchonok(a)gmail.com> wrote: > > Dear Elaine, > > Thank you for your answer. > > I read the last link > http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/savemodel.html#afterfitting > > but I still can not save the map > > <F8EED359A67845868DD4F80A9DAF3499.png> > > If I put onGrid I get this > > <B7696E2A55B04A298BEB09E32A85BDF2.png> > > Could you please briefly tell how to make it work? > > Thank you. > > > Sincerely, > Dmitry > > > Sent from Mail for Windows 10 > > From: Elaine Meng > Sent: Thursday, May 10, 2018 5:59 PM > To: Dmitry Semchonok > Cc: chimera-users(a)cgl.ucsf.edu > Subject: Re: [Chimera-users] saving new position of the model > > Dear Dmitry, > For atomic models, of course: you can just specify saving transformed coordinates in the Save PDB or Save Mol2 dialog (or “write” command). > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/savemodel.html> > > The rotating could be done by hand with the mouse or with commands “turn” or “roll." > > However, I’m guessing you probably mean a map since that is more complicated. As explained in the “Saving Maps After Fitting” link below, you would generally have to resample the map onto a different grid that has the axes oriented how you want: > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/savemodel.html#afterfitting> > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > > > On May 10, 2018, at 8:34 AM, Dmitry Semchonok <semchonok(a)gmail.com> wrote: > > > > Dear colleagues, > > Is there a way to rotate the model and than save it with a new x y z? > > Thank you > > Sincerely, > > Dmitry > > > <F8EED359A67845868DD4F80A9DAF3499.png><B7696E2A55B04A298BEB09E32A85BDF2.png>

3 3

saving new position of the model
by Dmitry Semchonok 10 May '18

10 May '18

Dear colleagues, Is there a way to rotate the model and than save it with a new x y z? Thank you Sincerely, Dmitry Sent from Mail for Windows 10

2 1

Setting map origin index to 0 while keeping fitted structures
by Ahmad Abdelzaher 08 May '18

08 May '18

Hello, I have spent some time fitting structures to my map. I want to set the origin to 0, however, that will lose me all the work I did. Any suggestions? Regards.

3 2

Help
by Kimberley Perry 08 May '18

08 May '18

Hello! I am trying to model molecular structures for a Python course I am taking. I tried your online water example, and it looked like it ran, but I am not seeing the structure. Am I doing something wrong? Kim

4 7

join models
by VALENTINA BRANDI 08 May '18

08 May '18

Hi, I’m a Phd student and I need to join different domains of a protein. I have used the tool “join models” of Chimera, but unfortunately after the union there is a partial superimposition between the two models. How can I solve this problem? Thank you so much, Valentina Brandi Inviato da Posta<https://go.microsoft.com/fwlink/?LinkId=550986> per Windows 10

2 1

movie recording
by Michał Kadlof 04 May '18

04 May '18

Hello, I would like to make a movie using Chimera. I need to interpolate between key frames. I know how to do it using Animation tool, but I would like to do it for thousands of frames and clicking it all by hand is not doable. Is there any magic command for making timeline automatic way? -- best regards, Michał Kadlof <m.kadlof(a)cent.uw.edu.pl>

2 2

trying to use per-frame pdb 'CONECT' information in movie maker
by Black, Kersey 04 May '18

04 May '18

Hi, Just recently back to using Chimera after a long time, so a bit rusty on this. I am reading in a trajectory of a small hydrocarbon for a single pdb file, and with each fram I include the geometry and the connectivity I want with ‘CONECT’ lines. But, when I use the Movie Maker tool to read it in, it seems to using one or more frames (perhaps the last one? to detect connectivity to auto detect connectivity and then applying it to all geometries, and this is putting bonds in places where I do not want them. Does movie maker honor CONECT information for each step? Is there a way to have it do so? Or is connectivity set once for the entire trajectory? Thanks much for any help on this, Kersey

2 1

Coloring ensemble atoms by distance from mean structure
by Tom Goddard 03 May '18

03 May '18

Hi David, I’ve attached a Python script mean_distance.py that can compute the distance of each atom in an ensemble from the mean structure. Then you can color using that distance. Here’s an example set of Chimera commands. open 1mtx show open mean_distance.py rangecolor distance_from_mean 0 blue 3 white 6 red The script uses all open molecules as the ensemble. The coloring can also be done with menu Tools / Depiction / Render by Attribute. Tom > On May 3, 2018, at 10:10 AM, Morgan, David Gene wrote: > > Tom, > > Hope you are doing well. Jim Powers and I here at IU keep thinking we need to invite you and/or the team back for another chimera workshop, but we haven't done the ground work to see how possible that would really be. But I keep hoping! > > In the meantime, I have a question about whether chimera can do something, and if not, I have a feature request... I was watching a grad student give a talk showing lots of superposed atomic structures. The structures included some molecular dynamics simulations and some crystal structures of the same protein in subtly different conformations (packing into a viral capsid, where the different subunits in the asymmetric unit have slightly different conformations). It occurred to me that _after_ showing the mess of spaghetti he had, the points he needed to make would be better served with a different visual: If he were to average the ensemble of MD atomic positions to a single chain (and color-code by the ensemble RMS difference from the average) and do the same for all his ensemble of X-ray structures, it would be much easier to talk about and show the consistencies and inconsistencies in the atomic co-ordinates from all the data. This same sort of averaging an ensemble of atomic co-ordinates is sometimes done with NMR structure ensembles (but I don't know about the color coding with the RMS). > > I have looked at lots of packages that manipulate atomic co-ordinates, but haven't found anything that seems to actually do what I want to do. For example, gromacs is supposed to do the averaging but it really wants to work with MD data and at a minimum, I'm not smart enough to make it work with a series of standard PDB files. My NMR colleague suggested molmol for the averaging, and I need to explore that more. But there doesn't seem to be a recent linux version nor does it seem to be "scriptable" (i.e., if I wanted to do this for a dozen different ensembles, I would have to painfully mouse click my way through the process). On top of all that, I ran into numerous on-line discussions about how averaging was "the wrong thing to do." All those people had valid reasons for saying so, but right now, I'm really talking about a more simple visual that conveys some of the information contained in any sort of ensemble of atomic co-ordinates. > > So my first question is: does chimera have a utility that would do this sort of thing? I looked at various commands but did not see anything that looked like it would do this. If not, can I put a feature request into the queue? > > Looking forward to hearing from you and chatting some more. > > -- > politics is more difficult than physics. > A. Einstein > > David Gene Morgan > Electron Microscopy Center > 047D Simon Hall > IU Bloomington > 812 856 1457 (office) > 812 856 3221 (3200) > http://iubemcenter.indiana.edu >

3 3

Question regarding rotating dihedrals
by Rodrigo Galindo-Murillo 02 May '18

02 May '18

Hello! I need to do a dihedral scan around the phi/psi angles of alanine dipeptide and to create the input files to later do single point calculations I am using the cmd script: open ../scan.pdb rotation 0 @/serialNumber=7 @/serialNumber=9 rotation 0 180 write format pdb #0 test.pdb I need to use atom serial numbers since the idea is later do the scan with non-canonical peptides that will not work with the native phi/psi descriptions. The script is not modifying any angle but I can see that is generating test.pdb correctly. Could you please orient me if this is the correct set of instructions? Thank you! Rodrigo.

2 1

Changing depth cue to side to side from front to back
by Trevor Harris 02 May '18

02 May '18

Hello, I would like to know if it is possible to change the depth cue to side to side rather than front to back. I don’t want to change the position of the molecule. Is it possible? Thanks, Trevor

2 1

Label hydrogen bonds
by Pawan Mainkar 30 Apr '18

30 Apr '18

The following bug report has been submitted: Platform: windows_x86_64 Chimera Version: 1.11.2 Description Respected sir, I am a PhD student in the discipline of Biotechnology, actually sir i am working on Enzyme-inhibitor docking study and i did docking using Cluspro and then i want to check how much interaction by visualizing the inter molecular hydrogen bonds with proper labeling (like in structure hydrogen bond between D45-S89 with 2.3 Angstron) ,but sir am only able visualize only hydrogen bonds in Your software UCSF Chimera but am unable to label it with proper amino acid along with distance so i request you sir please tell me how to do that or provide me any video file regarding the same File attachment: Docking complex.docx

2 1

Important Query
by Rida Zainab 30 Apr '18

30 Apr '18

Respected Sir, I am a research student trying to use chimera but I am having difficulties. Whenever I give an operation or task in chimera, the replylog opens always giving error. Suppose I tried to convert PDB file to Mol2 and there was error of replylog. I tried to do docking using autodock vina and it is not happening too. I am unable to do anything. Please tell me what's wrong? Big help needed. Regards, Rida.

2 1

Suggestion for adding a volume map to morph conformation
by Trevor Harris 25 Apr '18

25 Apr '18

Hello, I would like to use the Morph Conformation show the changes of the molecular orbitals from starting material to transition state to product. I can show the changes structurally of the atoms which is great, but this would be amazing with the molecular orbitals overlaid the structures. If this option is available to add volumes into morph conformation, then I couldn’t find it. Would it be possible to add this feature? It would be similar to IBOView. Thank you! Trevor Harris Postdoctoral Fellow UPenn Chemistry, Chenoweth Group

3 5

Problem running Modellerfrom Chimera (versión 1.11.2(build 41380) 2016-12-05 19:45 UTC. Platform Linux64)
by Sergio Garay 23 Apr '18

23 Apr '18

Hi all I've tried to run Modeller locally from Chimera (versión 1.11.2(build 41380) 2016-12-05 19:45 UTC. Platform Linux64. Windowing system: x11), but when it finishes, the model is not loaded inside Chimera. The log window give me the following output: *Model 0 (model1.pdb) appears to be a protein without secondary structure assignments.* *Automatically computing assignments using 'ksdssp' and parameter values:* * energy cutoff -0.5* * minimum helix length 3* * minimum strand length 3* *Use command 'help ksdssp' for more information.* *seq (len 437): added* *target (len 437): model1.pdb (#0) chain A* *seq (len 437): model1.pdb (#0) chain A* *target (len 437): added* *Target seq: added* *Template structures: * * model1.pdb (#0)* *Run locally, the Modeller binary location: /usr/bin/mod9.19* *Now, modeller is running locally...* *Wrote /tmp/tmp73g3JY/template_struc/model1.pdb_0_0.pdb* *MODELLER process output* *-----------------------* *-----------------------* *MODELLER process errors* *-----------------------* *Could not find platform independent libraries <prefix>* *Could not find platform dependent libraries <exec_prefix>* *Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]* *'import site' failed; use -v for traceback* The problem seems to be that Chimera can not load the models obtained . I can find the model inside the directory: /tmp/tmp73g3JY/template_struc/*model1.pdb_0_0.pdb* Thank you in advance. Sergio -- *Sergio GarayDr. en Ciencias BiológicasFacultad de Bioquimica y Cs. BiológicasUniversidad Nacional del LitoralSanta Fe - ArgentinaC.C. 242 - Ciudad Universitaria - C.P. S3000ZAAArgentinaPh. +54 (342) 4575-213Fax. +54 (342) 4575-221 *

2 1

Fwd: Re: run chimera remotely over nice dcv
by Greg Couch 23 Apr '18

23 Apr '18

Solution found! -------- Forwarded Message -------- Subject: Re: [Chimera-users] run chimera remotely over nice dcv Date: Sat, 21 Apr 2018 13:20:11 +0200 From: Mihajlo Vanevic <m.vanevic(a)uu.nl> To: Greg Couch <gregc(a)cgl.ucsf.edu> Dear Greg, Thank you very much for the prompt reply. About ssh -X, indeed putting the compatible libGL.so from local machine to Chimera's lib folder does the trick. About Nice DCV, I have contacted Nice DCV developers and will let you know if the problem is solved. With best wishes, Mihajlo On 04/20/2018 07:54 PM, Greg Couch wrote: > > Hi Mihajlo, > > We don't have any experience with Nice DCV, perhaps some other user on > the mailing list can help. But guessing at possible problems, make > sure that Chimera is displaying locally in Nice DCV virtual machine > (the DISPLAY environment variable should be ":0"), and the remote > display is done using the Nice DCV client. > > If, instead, you're using X11's remote display capability, then you > wouldn't need to use Nice DCV, any virtual machine technology would do > (or not do) -- the trick there is to have compatible OpenGL drivers on > both the virtual machine and your local computer (running the X11 > server). Assuming compatible versions of Linux on both ends, you > could copy libGL.so from your local machine to the Chimera's lib > directory on the remote machine, and it should work. > > Good luck, > > Greg > > On 4/20/2018 5:07 AM, Mihajlo Vanevic wrote: >> >> Dear Chimera users and developers, >> >> We are trying to run Chimera remotely on our cluster via Nice DCV >> visualization software: >> >> https://www.nice-software.com/products/dcv >> >> This package provides GPU acceleration for OpenGL and >> DirectX applications. It indeed works for most of apps, however with >> Chimera >> we get the following startup error >> >> X Error of failed request: GLXBadContext >> Major opcode of failed request: 152 (GLX) >> Minor opcode of failed request: 5 (X_GLXMakeCurrent) >> Serial number of failed request: 73 >> Current serial number in output stream: 73 >> >> Our cluster visualization node has nvidia GeForce GTX 1080 Ti cards >> and nvidia drivers 384.81 >> >> Chimera works if we use software mesa rendering, but it would be great if >> we can make it work remotely with hardware rendering. >> >> With kind regards, >> Mihajlo Vanevic >> Cryo-EM group, Utrecht University >>

1 0

Error in Windows saving a session
by Joel Mackay 22 Apr '18

22 Apr '18

Hi all Have other people seen (and solved!) this error before (below)? I'm having it crop up pretty much all the time now when I try to save a session (on my Win7 machine - running Chimera 1.11.2. Thanks Joel WindowsError Exception in Tk callback Function: <function command at 0x00000000155434A8> (type: <type 'function'>) Module: <module 'chimera.baseDialog' from 'C:\Program Files\Chimera 1.11.2\share\chimera\baseDialog.pyc'> (line: 447) Args: () Traceback (innermost last): File "C:\Program Files\Chimera 1.11.2\bin\lib\site-packages\Pmw\Pmw_1_3_3\lib\PmwBase.py", line 1747, in __call__ return apply(self.func, args) File "C:\Program Files\Chimera 1.11.2\share\chimera\baseDialog.py", line 449, in command getattr(s, buttonFuncName(txt))() File "C:\Program Files\Chimera 1.11.2\share\OpenSave\__init__.py", line 264, in Save getattr(self, self.keepEquiv())() File "C:\Program Files\Chimera 1.11.2\share\chimera\baseDialog.py", line 704, in OK self.Apply() File "C:\Program Files\Chimera 1.11.2\share\OpenSave\__init__.py", line 183, in Apply self.command(1, self) File "C:\Program Files\Chimera 1.11.2\share\SimpleSession\gui.py", line 41, in _saveCB saveSession(paths[0], **kw) File "C:\Program Files\Chimera 1.11.2\share\SimpleSession\save.py", line 135, in saveSession os.rename(tsave, filename) WindowsError: [Error 32] The process cannot access the file because it is being used by another process WindowsError: [Error 32] The process cannot access the file because it is being used by another process File "C:\Program Files\Chimera 1.11.2\share\SimpleSession\save.py", line 135, in saveSession os.rename(tsave, filename) See reply log for Python traceback. ------------------------------------------------------------------------------------------------------------------------------ Professor Joel Mackay | NHMRC Senior Research Fellow Chair, Biochemistry, Cellular and Molecular Biology Cluster School of Life and Environmental Sciences THE UNIVERSITY OF SYDNEY A: School of Life and Environmental Sciences | Rm 674, Building G08 | Butlin Ave The University of Sydney | NSW | 2006 | Australia T: +61 2 9351 3906 | F: +61 2 9351 5858 | S: joelmackay E: joel.mackay(a)sydney.edu.au | W: www.mmb.usyd.edu.au/mackay/

3 7

run chimera remotely over nice dcv
by Mihajlo Vanevic 20 Apr '18

20 Apr '18

Dear Chimera users and developers, We are trying to run Chimera remotely on our cluster via Nice DCV visualization software: https://www.nice-software.com/products/dcv This package provides GPU acceleration for OpenGL and DirectX applications. It indeed works for most of apps, however with Chimera we get the following startup error X Error of failed request: GLXBadContext Major opcode of failed request: 152 (GLX) Minor opcode of failed request: 5 (X_GLXMakeCurrent) Serial number of failed request: 73 Current serial number in output stream: 73 Our cluster visualization node has nvidia GeForce GTX 1080 Ti cards and nvidia drivers 384.81 Chimera works if we use software mesa rendering, but it would be great if we can make it work remotely with hardware rendering. With kind regards, Mihajlo Vanevic Cryo-EM group, Utrecht University

2 1

Adding quadrant lines to atoms
by Trevor Harris 20 Apr '18

20 Apr '18

Hi, Is there a way to add quadrant lines to atoms similar to how Houkview does it in CylView, pictured below. If not, could you add this feature as an option? All the best, Trevor Harris

3 4

Superimpose map with fitted atoms
by Luca Pellegrini 20 Apr '18

20 Apr '18

Hi, I’d like to superimpose a cryoEM map with fitted atoms onto a second cryoEM map. I do this using ‘fit in map’, but only the map moves, the fitted structure does not. Is there a way to update the coordinates of the fitted structure according to the map superposition? Best wishes, Luca Luca Pellegrini, PhD Department of Biochemistry University of Cambridge 80 Tennis Court Road Cambridge CB2 1GA UK Email: lp212(a)cam.ac.uk Phone: 0044-1223-760469 https://www.bioc.cam.ac.uk/pellegrini-group/pellegrini-group @PellegriniLab

2 1

Saving multiple identical PDB in a single file with unique chain ID
by Ahmad Abdelzaher 20 Apr '18

20 Apr '18

Hello, I'm building a tubulin lattice. I want to save the structure as a single model, however, the chain ID for each monomer should be different from the other ones. If I copy/combine my alpha-beta tubulin monomer, I get another structure with A and B chains. What I want is different chain letters. How can I do it? Regards.

2 5

Making chimera selections on the fly
by Bala subramanian 19 Apr '18

19 Apr '18

Dear chimera lovers, Good day. I wrote a small script (pasted below) to monitor the dipole vector of water molecules during MD. The script was adopted based available example. rc('close #1-500') m = chimera.openModels.list()[0] wat = m.residues[2449] com = Point([a.coord() for a in wat.atoms], [a.element.mass for a in wat.atoms]) # dipl = Vector() No working, Use numpy instead dipl = np.array( [0.0,0.0,0.0] ) for atm in wat.atoms: #dipl += atm.charge * atm.coord() dipl += atm.charge * np.array( atm.coord().data() ) vend = np.array(com) + 5 * dipl of = open('current.bild','w') of.write('.color green\n') of.write('.cone %f %f %f %f %f %f 0.5 \n' % (com.x,com.y,com.z,vend[0],vend[1],vend[2])) of.close() rc('open current.bild') Query 1) The following syntax given in a example doesnt work. What is the chimera point object indeed, an array or list ?. How to do math operations on point object. dipl += atm.charge * a.coord() Error: TypeError: unsupported operand type(s) for *: 'float' and '_chimera.Point' Query 2) In my example, I choose a specific water molecule by residue index. I am looking for some way to select the water (or get list of water residues) that satisfy a selection on the fly, lets say that water within 3 A from a prot. residue. In short, how to handle selections inside python script in chimera framework. I tried to play with chimera.selections but I didnt succeed. Any example could be of help. Query 3) Invoke data calculated out of chimera inside a perframe script. If I have say 100 frames. I can do the dipole vector calculation outside chimera and write separate “.bild” files, 1.bild, 2.bild, …..n.bild. Then inside the perframe script, I can invoke a particular .bild fine corresponding to the frame no. Please help me with an syntax example if this is possible. Thanks in advance, Bala -- C. Balasubramanian

2 1

Re: [Chimera-users] multiple structures to minimize
by Elaine Meng 19 Apr '18

19 Apr '18

> On Apr 19, 2018, at 5:21 AM, Lu Yang <luy(a)princeton.edu> wrote: > > Hi Elaine, > I’m a Chimera-user and have a question of structure minimization. I have multiple structures to minimize for ligand docking simulation. I wonder if I can open them all in chimera, and select all of them for structure minimization? Will they affect each other? Because otherwise I’ll have to go through open -> minimize -> wait -> save one by one. > Best, > Ling > ----------------------------------------------------------------------- > Lu (Ling) Yang > Ph.D candidate | Andolfatto Lab > Ecology & Evolutionary Biology | Princeton University > www.luyangevolution.com > Hi Ling, It is recommended to send questions to chimera-users(a)cgl.ucsf.edu (CC’d here) to ensure getting an answer. As it says in the “minimize structure” help page, <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/minimize/minimize…> "All chosen models are treated as a single system” which is not what you want. It sounds like it would be better to write a script using Chimera’s “minimize” command. First try this on one ligand structure by entering the command directly, to figure out what command options to use. After you figure out the correct Chimera command, you can write a Python script to loop through multiple ligands, opening (“open” command), minimizing, and saving (“write” command) them one by one. See documentation for individual commands and their options: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/framecommand.html> … and for writing a Python script to loop through multiple structures: <http://www.rbvi.ucsf.edu/chimera/docs/ProgrammersGuide/basicPrimer.html> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

2 1

Residue selection for simulation/energy-minimization
by Kim, In-Kwon (kimiw) 19 Apr '18

19 Apr '18

Dear, I am trying to publish our structure and modeling done by CHIMERA. My questions are 1. What is the default option for distance for selecting residues around ligand (e.g., XX A around ligand). 2. Any time scale for simulation? Here is my method description. Any suggestion, related citation, and help would be appreciated. “~. Residues within XX A of the ligand was selected for simulation. The model was then subjected to energy minimization using the AMBER ff14SB protein force field in the Chimera package (34).” Thanks, In-Kwon In-Kwon Kim, Ph.D. Assistant Professor Department of Chemistry University of Cincinnati

2 2

BIOMT symmetry matrices
by Healey, Joe 19 Apr '18

19 Apr '18

Hi Chimera Team, I'm familiar with the sym command within chimera, specifying particular degrees of rotational symmetry for instance. As the biological unit feature tends to work quite nicely for this for a number of the proteins that I'm working on, I was wondering if there is a simple way to apply the BIOMT matrix for one protein to another? The proteins I want to apply them to are homology models of the equivalent proteins, so their biological unit information should be meaningful. If its possible to do this in chimera that would be great, but if you have any alternative suggestions (perhaps its possible to copy the BIOMT lines from one PDB text file to another? Joe Healey M.Sc. B.Sc. (Hons) MRSB PhD Student MOAC CDT, Senate House University of Warwick Coventry CV47AL Mob: +44 (0) 7536 042620 | Email: J.R.J.Healey(a)warwick.ac.uk Jointly working in: Waterfield Lab<http://www2.warwick.ac.uk/fac/med/research/tsm/microinfect/staff/waterfield…> (WMS Microbiology and Infection Unit) and the Gibson Lab<http://www2.warwick.ac.uk/fac/sci/chemistry/research/gibson/gibsongroup/> (Warwick Chemistry) Twitter: @JRJHealey<https://twitter.com/JRJHealey> | Website: MOAC Page<http://www2.warwick.ac.uk/fac/sci/moac/people/students/2013/joseph_healey> | ORCID: orcid.org/0000-0002-9569-6738

3 6

SwissSidechain plugin for Chimera
by Madeline Rollins 17 Apr '18

17 Apr '18

To whom it may concern, I am trying to mutate a residue of my protein of interest to one of the non-natural sidechains (phosphoserine) in the SwissSidechain database. I downloaded the SwissSidechain plugin onto my computer a few months ago and it worked fine, but it recently disappeared and I have been trying to re-download it. I have downloaded the zip file from the SwissSidechain website, extracted all of the files inside (both the dependent and independent Rotamer folders) and have added the directory containing the location in the tools category. However, the SwissSidechain module still doesn't appear under the Tools > Structure Editing menu. When I try to use the command "swapna SEP #0:95.A" (for example), I get an error message that reads "No connectivity template for residue 'SEP'." Do you have any advice on how to solve this issue? Thank you, Madeline Rollins

2 4

hold the clipping of EM density map
by C.J. 17 Apr '18

17 Apr '18

Hi specialists, I tried to clip half part of a EM density map using "Tools->Viewing->Side View". And then, I tried to rotate the map with specified part of the map clipped. But I failed to. Only the part toward me was clipped. Am I missing something? Regards, Jianhao

2 1

Measure rotation
by Daniel Asarnow 17 Apr '18

17 Apr '18

Hello! I was wondering how the transformations from measure rotation are calculated. In particular, for my case, the translation reported with the rotation matrix is very long - much longer than the reported shift, and outside the box. Is the origin really 0,0,0 in the map frame? (I.e. box corner). Also, is the axis reported the new Z after rotation, or something else? Is that axis times the reported angle a correct axis-angle representation? Finally, what is the axis point? Thanks & best, -da

3 2

How to fix .mrc file opening to a very small size?
by Ahmad Abdelzaher 16 Apr '18

16 Apr '18

Someone shared a density map with me. I'm not sure how they "cropped" that particular density, but the file they sent me is huge in size, and contains only a small density that I have to zoom in and adjust every time I open the .mrc file. How can I fix it? Regards.

2 1

Building homology model with built-in Modeller
by Nguyen, Hieu T 12 Apr '18

12 Apr '18

Dear, I am trying to build a few homology models using the sequence of mouse HSP90 alpha and beta, and I have a few questions: 1. First I tried to build a model of mouse Hsp90 using its protein sequence and 2CG9 (a dimer) as a template. The proposed model came out as a monomer, which is understandable since the sequence provided is of a monomer. However, I am wondering if there is a way for me to build a dimer using this monomer sequence with a dimer template (write it as a dimer sequence somehow? Or there is a specific option to do this?). 2. I also want to build a homology model using 2IOQ as a template. However, on PDB, 2IOQ is displayed as 3 structures (biological assembly 1, biological assembly 2, asymmetrical structure). The structure I desire as a template is biological assembly 2 but when I fetched it by ID, the asymmetrical model came out and is also the template the program used. Is there a way for me to specify the template? 3. I have a protein model of my own that is not on PDB. Is there a way for me to use my structure as a template for the sequence? If yes, how would I do so? Please let me know as soon as possible. Thank you very much. Sincerely, Hieu Nguyen Research Assistant - Resident Assistant University of New Hampshire '18 Biochemistry, Molecular and Cellular Biology Department of Molecular, Cellular and Biomedical Sciences

2 1

Reduce a PDB file
by Luke Kendall 12 Apr '18

12 Apr '18

Hi I have a PDB file of Chromosomes and I am trying to color and convert the file to a VRML file. I am doing this so I can get the model printed, but the file is too large for the printing company. I need to reduce the file size, but I am having trouble doing this

3 2

Hydrogen Bond numbers
by Dustin Park 11 Apr '18

11 Apr '18

Hello, After using autodock and obtaining the HBonds, it seems that if I run the simulation with the exact same parameters for receptor search volume, the HBonds numbers change along with some other information. I have added the file images to show. Is this supposed to be happening or is this a user error? First run: Second Run with same parameters: Thank you! -- Dustin Park University of Illinois Urbana-Champaign (M. Eng - Bioengineering) Mobile: *224.623.3626*

2 2

Re: [Chimera-users] rmsd
by Elaine Meng 11 Apr '18

11 Apr '18

Dear Altaira, It is recommended to send questions to chimera-users(a)cgl.ucsf.edu (CC’d here) to ensure a reply. As you can see from the log, one value is between 1733 pairs and another is between 421 atom pairs. The reasons matchmaker uses fewer atoms: (1) it only uses one atom per residue, CA for amino acids (2) in matchmaker, you used pruning which doesn’t use all sequence-aligned pairs, just the ones that end up closest in space Also, matchmaker moves the structures, so unless you did the exact same matchmaker before the rmsd, the structures would be in different positions for the two RMSD calculations. If the position is exactly the same, then to get the same RMSD from the two, you would have to specify in the rmsd command alpha-carbons only of all of the same residues that are sequence-paired in the matchmaker alignment (there is a matchmaker option to show that alignment) and use matchmaker without pruning (another option). It would probably be difficult to list all the numbers of the matchmaker sequence-aligned residue pairs in the rmsd command. You just have to understand which value you want and thus which method you want to use. To understand the methods and their similarities/differences you would need to read their descriptions, see here and links therein. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/superposition.html> I hope this clarifies the situation, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Apr 11, 2018, at 1:33 PM, Dearborn, Altaira (NIH/NIAMS) [E] <altaira.dearborn(a)nih.gov> wrote: > > Dear Dr. Meng, > I calculated the rmsd using matchmaker and the rmsd command as you recommended in the thread below. I am getting vastly different values, 0.421 versus 25.274 angstroms and the number of atom pairs are different as well. Is there an option in the rmsd command that I am missing? > Thank you, > Altaira Dearborn > > From the log: > Executing rmsd ['sel'] > RMSD between 1733 atom pairs is 25.274 angstroms > > Matchmaker combined-coot-2.pdb, chain A (#0) with 5dhv-Dimattia2016-23.pdb, chain A (#1), sequence alignment score = 607.3 > with these parameters: > chain pairing: ss > Needleman-Wunsch using BLOSUM-62 > ss fraction: 0.3 > gap open (HH/SS/other) 18/18/6, extend 1 > ss matrix: (O, S): -6 (H, O): -6 (H, H): 6 (S, S): 6 (H, S): -9 (O, O): 4 > iteration cutoff: 2 > > Matchmaker combined-coot-2.pdb, chain B (#0) with 5dhv-Dimattia2016-23.pdb, chain B (#1), sequence alignment score = 563.1 > with these parameters: > chain pairing: ss > Needleman-Wunsch using BLOSUM-62 > ss fraction: 0.3 > gap open (HH/SS/other) 18/18/6, extend 1 > ss matrix: (O, S): -6 (H, O): -6 (H, H): 6 (S, S): 6 (H, S): -9 (O, O): 4 > iteration cutoff: 2 > RMSD between 226 pruned atom pairs is 0.421 angstroms; (across all 226 pairs: 0.421) > > > [Chimera-users] rmsd > > Elaine Meng meng at cgl.ucsf.edu > Tue Nov 8 08:56:43 PST 2011 > • Previous message: [Chimera-users] rmsd > • Next message: [Chimera-users] Percent Identity for specified parts of a structure > • Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] > Dear Simone, > Yes, there are many possible ways to calculate protein-protein RMSD in Chimera. > > If you want Chimera to figure out the fit and superimpose the proteins for you, try MatchMaker: this uses the sequences and helix/strand locations to figure out how to superimpose the proteins, then reports RMSD and how many alpha-carbon pairs were used to calculate the RMSD. MatchMaker is in the menu under "Tools... Structure Comparison." It has several options. The RMSD would be given in the Reply Log (in menu under "Favorites"). > > <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/matchmaker/matchma…> > <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/mmaker.html> > > If you want to tell Chimera specific residue numbers and atoms to fit, instead use the "match" command: > <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/match.html> > > Or, if you do not want to superimpose, only calculate the RMSD in the current non-fitted positions, the "rmsd" command: > <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/rmsd.html> > > Or, if you have a molecular dynamics trajectory or NMR ensemble of many copies of the same structure, there are additional methods for calculating all-by-all RMSD values. > > Discussion of all these methods and links to more details: > <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/superposition.html> > > I hope this helps, > Elaine > ---------- > Elaine C. Meng, Ph.D. > UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab > Department of Pharmaceutical Chemistry > University of California, San Francisco > > On Nov 8, 2011, at 2:08 AM, sdimicco wrote: > > > Dear Chimera developers, > > is it possible to calculate the rmsd between two proteins by the softwere? How can I do it? > > Thank you in advance. > > Simone > > > > • Previous message: [Chimera-users] rmsd > • Next message: [Chimera-users] Percent Identity for specified parts of a structure > • Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] > More information about the Chimera-users mailing list

1 0

Re: [Chimera-users] Measure rotation using "measure rotation" and "match"
by Elaine Meng 11 Apr '18

11 Apr '18

Dear Hui-Ting, You really should send questions to chimera-users(a)cgl.ucsf.edu (CC’d here) instead of to me directly, since other people may be able to give better answers. In this case, I’m not certain that I understand what you are trying to do. First, your question, and then I will try to answer below: > On Apr 10, 2018, at 3:47 AM, Chou, Hui-Ting <chouh(a)janelia.hhmi.org> wrote: > > Dear Elaine, > I am trying to measure the rotation angle and shift of the domain movement, but don’t quite understand the output values when I run “measure rotation” and “match”. I fit a pdb file to two different EM maps and saved them separately (but saved relatively to the same map). When I opened these two pdb files and run “measure rotation #9 #10”. The rotation angle is 10.36 degree and the shift is 1.39 angstrom. The Reply Log shows-- > Position of prop_fit4.9A_relative4.9Amap.pdb (#10) relative to prop_fit14A_relative4.9Amap.pdb (#9) coordinates: > Matrix rotation and translation > 0.98376605 -0.01263314 0.17901049 -36.94403456 > 0.01042163 0.99985738 0.01328910 -3.85711966 > -0.17915284 -0.01120778 0.98375741 42.31539129 > Axis -0.06809615 0.99561826 0.06408739 > Axis point 215.26774421 0.00000000 225.37339748 > Rotation angle (degrees) 10.36217664 > Shift along axis 1.38741058 > > But when I run “match showmatrix true #9 #10”. It gave me two rotation angles and shifts for “the motion of #9 in #10 coordinate system” and “motion of #9 original coordinates in #10 coordinate system”. How do I obtain the actual rotation and shift from these two matrices? Should I use the values calculated from “measure rotation” or “match”? And could I measure the rotation angle and shift from two atomic coordinates with a specific rotation axis? > > Executing match ['#9', '#10'], no iteration > Motion of #9 in #10 coordinate system > Matrix rotation and translation > 0.97764856 0.13202668 -0.16362225 13.44032867 > -0.15552155 0.97782730 -0.14023843 73.46708163 > 0.14147909 0.16255069 0.97650445 -62.31730866 > Axis 0.58548705 -0.58995806 -0.55601655 > Axis point 447.68302710 0.00000000 23.93534493 > Rotation angle (degrees) 14.98575215 > Shift along axis -0.82390335 > Motion of #9 original coordinates in #10 coordinate system > Matrix rotation and translation > 0.93081946 0.14002215 -0.33759285 62.65401058 > -0.19045400 0.97420342 -0.12105775 75.31116754 > 0.31193334 0.17697881 0.93347528 -89.61097572 > Axis 0.37852984 -0.82494928 -0.41973067 > Axis point 314.38283856 0.00000000 122.06207432 > Rotation angle (degrees) 23.18345231 > Shift along axis -0.79900536 > RMSD between 2428 atom pairs is 0.001 angstroms > > I failed to find the answers online, so it would be greatly appreciated If you could spare time to drop few lines or suggest me where to find the related document on the UCSF Chimera website! > > Thank you very much! > Best, > Hui-Ting It depends on whether you want the relationship of two sets of coordinates in the positions when you open them, or after matching them (superimposing their atoms). “measure rotation” gives you the relative position without matching, “match” gives you the relative position after they are matched. However, I would expect “measure rotation” to give you only identity matrix when you reopen the saved PDB files and don’t move them relative to each other. As I understand it, it knows nothing about the structures in the files, it only cares about whether they were moved relative to one another since opening. So that part of your question is a mystery me. If the 2 PDB files are similar or the same structures in 2 different fitted positions and you want to know how the 2 fitted positions relate to each other, I believe it would make sense to use the “match” result, but I don’t know why it gives two sets of results. Since “measure rotation” did not give an identity matrix, however, I’m suspicious of the situation (it suggests you moved one relative to the other after opening the files). I might start over in a new Chimera session and just open those two PDB files again and try “measure rotation” without moving one relative to the other, and then “match." I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

2 2

Splitting the ligand cluster file
by SAPTARSHI MUKHOPADHYAY 14BBT0011 11 Apr '18

11 Apr '18

Hello! I recently performed a ligand-protein docking job in SwissDock and downloaded the output file which contained the "clusters.dock4.pdb" file. I performed the ViewDock analysis on Chimera and now want to save a specific binding mode of a ligand from the cluster. I understand that the "Split" function is to be used in this regard, but I am not sure on how to implement this because of my limited experience with Chimera. Can I be provided with the exact steps for using this function? Thanks, Regards, Saptarshi

2 1

the .chimerax suffix was used for Chimera web data
by Elaine Meng 10 Apr '18

10 Apr '18

Hi Boaz, Long before we decided to name the next-generation package ChimeraX, we had used the .chimerax filename suffix for Chimera web data files. We decided it was obscure enough not to cause too much confusion going forward… <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/webdata/chimerax.…> ChimeraX does not use “.chimerax” suffix files at present; suffix .cxc is used for ChimeraX command files and .cxs for ChimeraX session files. <http://rbvi.ucsf.edu/chimerax/docs/user/commands/open.html#composite> Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Apr 10, 2018, at 2:19 PM, Boaz Shaanan <bshaanan(a)bgu.ac.il> wrote: > > Hi Eric, > I'm sure this is a revelation for you but oddly enough (or maybe not) the Consurf output has .chinerax type but is easily read into good old chimera. I was puzzled the first time I noticed this but it works. Perhaps I'm off the point in this discussion. > Cheers, > Boaz

2 1

Re: [Chimera-users] Chimera-users Digest, Vol 180, Issue 8
by Boaz Shaanan 10 Apr '18

10 Apr '18

1 0

ConSurf script on ChimeraX
by Fabian Glaser 10 Apr '18

10 Apr '18

Hi, I would like to use Chimera ConSurf scripts in ChimeraX, but I get the following error when I try to run the script on ChimeraX ModuleNotFoundError: No module named 'cPickle' File "consurf_final_zn.py", line 1, in See log for complete Python traceback. If you wish to report this error, send mail to chimerax-bugs(a)cgl.ucsf.edu <mailto:chimerax-bugs@cgl.ucsf.edu> and describe what you were doing and include a copy of the contents of the log. Don't include any data you wish to remain private since a publicly viewable bug report will be created. Is this something that can be fixed or updated? More generally I would like to update ConSurf with a version of the script for ChimeraX, can you help me with that? Here is the beginning of the original chimera script import cPickle, base64 try: from SimpleSession.versions.v65 import beginRestore,\ registerAfterModelsCB, reportRestoreError, checkVersion except ImportError: from chimera import UserError raise UserError('Cannot open session that was saved in a' ' newer version of Chimera; update your version') checkVersion([1, 12, 41623]) import chimera from chimera import replyobj replyobj.status('Restoring session...', \ blankAfter=0) replyobj.status('Beginning session restore...', \ blankAfter=0, secondary=True) beginRestore() def restoreCoreModels(): from SimpleSession.versions.v65 import init, restoreViewer, \ restoreMolecules, restoreColors, restoreSurfaces, \ restoreVRML, restorePseudoBondGroups, restoreModelAssociations molInfo = Thanks a lot, Best, Fabian Fabian Glaser PhD Head of the Structural Bioinformatics section Bioinformatics Knowledge Unit - BKU The Lorry I. Lokey Interdisciplinary Center for Life Sciences and Engineering Technion - Israel Institute of Technology, Haifa, Israel Web http://bku.technion.ac.il/ <http://bku.technion.ac.il/> Tel +972 (0) 4 8293701

2 3

Dear team UCSF chimera, kindly help me I download and installed the UCSFf chimera but its showing short cut
by Maria Yousuf 09 Apr '18

09 Apr '18

Dear team UCSF chimera Hi I download and installed the UCSFf chimera followed the linkon windows 7 Microsoft Windows 64-bit chimera-1.12-win64.exe<https://www.cgl.ucsf.edu/chimera/cgi-bin/secure/chimera-get.py?file=win64/c…> Size: 150984696 bytes MD5: b662f97cdacb8be458662aa638dd6694 Oct 24, 2017 Instructions<https://www.cgl.ucsf.edu/chimera/data/downloads/1.12/win64.html> Documentation<https://www.cgl.ucsf.edu/chimera/data/downloads/1.12/docs/> Runs on Windows 7 or later. Initially It worked well, but after 2 days a shortcut appeared in the file and some of its features are not functional, I cant able to open a docked file in .pdb format Kindly share the functional link to download chimera on 64bit windows 7 looking forward to hear from you soon regards Dr.Maria <http://aka.ms/weboutlook>

2 1

Chimera's hydrogen bond counting tool (FindHBond) from command-line?
by Gustavo Seabra 09 Apr '18

09 Apr '18

Hi all, Is there a way to run the Chimera's hydrogen bond counting tool (FindHBond) using the command line only? Could someone post me to the best way? -- Gustavo Seabra Professor Adjunto Universidade Federal de Pernambuco Recife - PE - Brasil +55-81-2126-7450 x5023 (goo.gl/ktsXSc)

2 3

chimeraX consurf
by Fabian Glaser 08 Apr '18

08 Apr '18

Hi, I would like to use Chimera ConSurf scripts in ChimeraX, but I get the following error when I try to run the script on ChimeraX ModuleNotFoundError: No module named 'cPickle' File "consurf_final_zn.py", line 1, in See log for complete Python traceback. If you wish to report this error, send mail to chimerax-bugs(a)cgl.ucsf.edu<mailto:chimerax-bugs@cgl.ucsf.edu> and describe what you were doing and include a copy of the contents of the log. Don't include any data you wish to remain private since a publicly viewable bug report will be created. Is this something that can be fixed or updated? Thanks a lot, Best, Fabian Fabian Glaser PhD Head of the Structural Bioinformatics section Bioinformatics Knowledge Unit - BKU The Lorry I. Lokey Interdisciplinary Center for Life Sciences and Engineering Technion - Israel Institute of Technology, Haifa, Israel Web http://bku.technion.ac.il/ Tel +972 (0) 4 8293701

1 0

How to change 32bit map into 16bit map
by Jun Ha Song 05 Apr '18

05 Apr '18

Hello, I sometimes invert my map using Fiji, and I also convert my 32bit map into 16bit map using Fiji's "Image → Type → 16-bit" function, but the only way to retrieve the map from Fiji is to save the map as .tif stack, then use IMOD's "tif2mrc" to get it back as .mrc file. However, once I save my map as .tif, the pixel spacing information of the map is set to 1,1,1. Because of this, I always have to re-adjust the pixel spacing back to original using IMOD's "alterheader" once I use Fiji for any kind of image adjustment. I know I can invert a map in Chimera (without setting the pixel spacing to 1,1,1 like Fiji) by using "Volume Filter → Filter Type : Scale → Scale by -1", but I don't know how to turn my 32bit map into 16bit map. Although the "Value Type" of scale filter allows me to specify which bit I want the map to be in, when I filter my float32 map with value type set to either int16 or uint16, the filtered map shows histogram with only few lines. Can UCSF Chimera turn float32bit map into 16bit map? Best, Junha Song.

2 2

Hello I have a question
by Teddy Chen 05 Apr '18

05 Apr '18

Hi my name is Teddy, I used UCSF Chimera for my research, and it is a very good software! I appreciate you made it. I have a question about structure comparison, I usually use Matchmaker to overlap 2 similar protein fragment to compare the difference. I wonder if the structure is bent or twisted during the matching process, in order to fit the reference structure more? For example, the attachment is for demonstration. There is a protein A, and protein A have a short from that miss some amino acid (the green part is missed). So the result produced by the Matchmaker would be A or B? If the result is A, can I make result B by UCSF Chimera? Thank you!

2 2

Minimum system requirements for software
by Kerley, Jeremy L 04 Apr '18

04 Apr '18

I have a faculty member who uses the Chimera software. While using the software, his current computer continually freezes/locks-up and must be rebooted. Please email the minimum/recommended system requirements for the Chimera software. I’m in the process of building out a replacement system and need that information. Regards, —— Jeremy Kerley Computing Support Specialist II Emory University School of Medicine Dept of Pediatrics IT Ph: (404)727-4781 ________________________________ This e-mail message (including any attachments) is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message (including any attachments) is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail message and destroy all copies of the original message (including attachments).

2 1

Open density map
by Wolf, Nina Marie 04 Apr '18

04 Apr '18

Hi, I’ve searched the forums and continue to have issues opening a density map in Chimera. Can you help me figure out how to do this starting with an mtz file and using COOT/Phenix/CCP4 to convert the file and load into chimera? Thank you, Nina Wolf

2 1

substituting atoms
by simon chapman 03 Apr '18

03 Apr '18

Hello...for my Master's dissertation, I need to substitute a sulphur atom for an oxygen in a Molecular Dynamics simulation. The run works fine with my target molecule 1KF1.pdb uploaded into Chimera, but the substituted version sends quite a few error messages and won't run. It doesn't appear to recognise the novel S atom. Any help would be much appreciated...I've been stuck on this for nearly a week! Best wishes Simon

3 14

intensity scaling of multiple cryo EM reconstructions
by Peter Doerschuk 03 Apr '18

03 Apr '18

Dear Chimera Community: We have several electron scattering intensity cubes from cryo EM. We would like to scale the intensity (not the size) of the particle so that we can fairly compare the intensity values in different cubes. We understand that some biophysical principle is required. Does Chimera contain tools related to such principles and the scaling calculations they imply? Thank you very much in advance for your help! Best regards, Peter

2 3

morph and surfaces
by Giorgio Luciano 02 Apr '18

02 Apr '18

Hello ! I was looking at the script for morphing among structures that can be found here http://www.cgl.ucsf.edu/chimera/data/movie-howto-mar2012/movie_examples.html (*coordset #1 1,161). * I've tried to use the surfacecat command in the script in order to obtain a morph through volumes since my idea was to create the movie and then export all the surface perframe in order to use them in another 3d software. I've seen that surfcat can actually create volumes for all the surfaces included in the 1r7w but morph start does not seems to work among the surface created. I've seen also that it could be a solution to create density maps from the surface and them morph them using volume viewer but it seem quite an awkard solution (at least for me that I'm no expert :) I've tried to find the limitation of morph command but it does not report anything regarding surfaces. Any help is very appreciated. Sorry for the cross-posting

4 5

problem with ccp4 map fitting
by ela.nekardova＠gmail.com 29 Mar '18

29 Mar '18

Dears, I need to depict a map generated from CCP4/Sfall and a .pdb file corrected by Coot. I would like to create images by Chimera. Unfortunately, I cannot figure out how to make a correct view (in Coot, the map fits the molecule well), please, see the image/session in the attachment. I could not have found a guidance in the User's guide. Can you help me please? Thank you in advance for your help. Best regards, Michaela Nekardova Institute of Biotechnology CAS, v. v. i. Laboratory of Biomolecular Recognition Address: Průmyslová 595, 252 50 Vestec.

3 3

Reading and saving large files in chimera
by #TOFAYEL AHMED# 29 Mar '18

29 Mar '18

Hi Chimera developers and users, I have faced a problem with chain IDs and secondary structure while working on a large file. As I am refining my model in Phenix and visualizing in Chimera, I need to go back and forth between these two software and that creates a problem. To replicate my problem, here I have taken an example from PDB so that you get the idea. If I take model bearing PDB id 5IRE and apply "phenix.pdb.biomt_reconstruction" I can generate the complete virus icosahedral structure from the asymmetric unit. But when I open this complete virus structure in Chimera and save it back again the chain IDs get changed. Is there any work around to maintain the original chain IDs and therefore maintain the secondary structure definitions in the file header, after opening and thereafter saving using Chimera? Best regards, Tofayel NTU Singapore

4 7

Chimera command to set the volume contour surface threshold
by Irene 29 Mar '18

29 Mar '18

Hi, I am new using Chimera and am writing a script to generate automatically some volume contour surfaces. I would like to know if there is command to set from the script the volume contour surface threshold? I came across a post from 2006 (https://www.cgl.ucsf.edu/pipermail/chimera-users/2006-November/001121.html) where it was mentioned that such command did not exist by that time. I hope there is one now! Thanks a lot, Irene

2 1

Display channel as a filled body in Chimera
by Boaz Shaanan 27 Mar '18

27 Mar '18

Hi, Is there a way to display in Chimera a channel identified by CastP as a filled body rather than engulfed by a surface? Thanks, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Fax: 972-8-647-2992 or 972-8-646-1710 ________________________________________ From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: Thursday, March 15, 2018 8:41 PM To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 179, Issue 6 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: Surface picking (Tom Goddard) 2. Re: Surface picking (Priit Eek) 3. Re: Surface picking (Tom Goddard) 4. Re: Surface picking (Priit Eek) 5. Re: Surface picking (Tom Goddard) ---------------------------------------------------------------------- Message: 1 Date: Thu, 15 Mar 2018 10:34:40 -0700 From: Tom Goddard <goddard(a)sonic.net> To: Priit Eek <priit.eek(a)gmail.com> Cc: UCSF Chimera Mailing List <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Surface picking Message-ID: <EFAC0902-4CA7-4C28-8EB1-5166495B44C5(a)sonic.net> Content-Type: text/plain; charset=utf-8 Hi Prit, I can select the split surface pieces of an MSMS surface with ctrl-click using Chimera 1.12. Does ctrl-click work to select atoms, or the original unsplit surface? If not then it is probably a graphics driver problem, since some graphics capabilities are needed to know what object is under the mouse. Another possible graphics driver problem is the green outline is not shown ? but if you select something the magnifying glass icon in the lower right corner of the main Chimera window (select inspector) should turn green. Tom > On Mar 15, 2018, at 4:47 AM, Priit Eek <priit.eek(a)gmail.com> wrote: > > Hi, > > I am trying to visualize some specific inner cavities in a structure. I can display the MSMS surface and split it into pieces (accelerator Sc), but then I need to select the extra surfaces to hide/delete them (starting with the main outer surface). For some reason surface picking with mouse (Ctrl + left click) doesn?t work. I checked the surface attributes and ?selectable with mouse? was true. > > I recall that this used to work some years ago, but not anymore. I am using the latest daily build (v1.13 build 41684) on macOS v10.12.6. Is this a bug or have some settings changed? I couldn?t find anything referring to this in the docs. > > Best regards, > Priit > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > ------------------------------ Message: 2 Date: Thu, 15 Mar 2018 20:06:04 +0200 From: Priit Eek <priit.eek(a)gmail.com> To: Tom Goddard <goddard(a)sonic.net> Cc: UCSF Chimera Mailing List <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Surface picking Message-ID: <A1252D71-C057-4085-83B4-2DC06A198AC8(a)gmail.com> Content-Type: text/plain; charset=utf-8 Elaine and Tom, Thank you for your replies. Selecting atoms and ribbons works as it should, but ctrl-clicking on surfaces has no effect whatsoever, be it before or after splitting. I could use Sc only because I selected the whole model using the command line. Splitting does work and I get a bunch of pieces, but I have no obvious way to select the distinct surfaces. Also, I?m afraid that using visiblePatches or any other method that involves selecting all residues that define the blobs would be extremely cumbersome in my case. As I said, if I ctrl-click on an atom or a ribbon, it gets selected, is highlighted in green, and the magnifying glass icon turns green as well. However, if I then ctrl-click on a surface, the selection is cleared (status bar displays ?selection cleared?). The graphics driver incompatibility actually seems a likely culprit. I think the previous time I used this feature, I was still on my old laptop. I am currently running Chimera on a 13-inch Early 2015 MacBook Pro (MacBookPro12,1). It has a built-in Intel Iris Graphics 6100 chipset. Could there be an easy hack/workaround on my side or a software patch? If not, then I guess I?ll go and finish that particular figure on another computer :) Cheers, Priit > On 15 Mar 2018, at 19:34, Tom Goddard <goddard(a)sonic.net> wrote: > > Hi Prit, > > I can select the split surface pieces of an MSMS surface with ctrl-click using Chimera 1.12. Does ctrl-click work to select atoms, or the original unsplit surface? If not then it is probably a graphics driver problem, since some graphics capabilities are needed to know what object is under the mouse. Another possible graphics driver problem is the green outline is not shown ? but if you select something the magnifying glass icon in the lower right corner of the main Chimera window (select inspector) should turn green. > > Tom > > >> On Mar 15, 2018, at 4:47 AM, Priit Eek <priit.eek(a)gmail.com> wrote: >> >> Hi, >> >> I am trying to visualize some specific inner cavities in a structure. I can display the MSMS surface and split it into pieces (accelerator Sc), but then I need to select the extra surfaces to hide/delete them (starting with the main outer surface). For some reason surface picking with mouse (Ctrl + left click) doesn?t work. I checked the surface attributes and ?selectable with mouse? was true. >> >> I recall that this used to work some years ago, but not anymore. I am using the latest daily build (v1.13 build 41684) on macOS v10.12.6. Is this a bug or have some settings changed? I couldn?t find anything referring to this in the docs. >> >> Best regards, >> Priit >> _______________________________________________ >> Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu >> Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users >> > ------------------------------ Message: 3 Date: Thu, 15 Mar 2018 11:13:14 -0700 From: Tom Goddard <goddard(a)sonic.net> To: Priit Eek <priit.eek(a)gmail.com> Cc: UCSF Chimera Mailing List <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Surface picking Message-ID: <AB507F91-8402-4939-8962-B91D8D457836(a)sonic.net> Content-Type: text/plain; charset=utf-8 Hi Prit, It seems like a graphics driver bug, but I haven?t seen this before where only surfaces cannot be selected. Did you try drag select ? that draws a rectangle and uses a different code path and maybe it would select the surface. If you use "molmap #0 5? to make a density map surface from molecule #0 can you select the resulting surface with ctrl-click? Are you showing your surface in mesh or some other unusual style? Tom > On Mar 15, 2018, at 11:06 AM, Priit Eek <priit.eek(a)gmail.com> wrote: > > Elaine and Tom, > > Thank you for your replies. Selecting atoms and ribbons works as it should, but ctrl-clicking on surfaces has no effect whatsoever, be it before or after splitting. I could use Sc only because I selected the whole model using the command line. Splitting does work and I get a bunch of pieces, but I have no obvious way to select the distinct surfaces. Also, I?m afraid that using visiblePatches or any other method that involves selecting all residues that define the blobs would be extremely cumbersome in my case. As I said, if I ctrl-click on an atom or a ribbon, it gets selected, is highlighted in green, and the magnifying glass icon turns green as well. However, if I then ctrl-click on a surface, the selection is cleared (status bar displays ?selection cleared?). > > The graphics driver incompatibility actually seems a likely culprit. I think the previous time I used this feature, I was still on my old laptop. I am currently running Chimera on a 13-inch Early 2015 MacBook Pro (MacBookPro12,1). It has a built-in Intel Iris Graphics 6100 chipset. Could there be an easy hack/workaround on my side or a software patch? If not, then I guess I?ll go and finish that particular figure on another computer :) > > Cheers, > Priit > > >> On 15 Mar 2018, at 19:34, Tom Goddard <goddard(a)sonic.net> wrote: >> >> Hi Prit, >> >> I can select the split surface pieces of an MSMS surface with ctrl-click using Chimera 1.12. Does ctrl-click work to select atoms, or the original unsplit surface? If not then it is probably a graphics driver problem, since some graphics capabilities are needed to know what object is under the mouse. Another possible graphics driver problem is the green outline is not shown ? but if you select something the magnifying glass icon in the lower right corner of the main Chimera window (select inspector) should turn green. >> >> Tom >> >> >>> On Mar 15, 2018, at 4:47 AM, Priit Eek <priit.eek(a)gmail.com> wrote: >>> >>> Hi, >>> >>> I am trying to visualize some specific inner cavities in a structure. I can display the MSMS surface and split it into pieces (accelerator Sc), but then I need to select the extra surfaces to hide/delete them (starting with the main outer surface). For some reason surface picking with mouse (Ctrl + left click) doesn?t work. I checked the surface attributes and ?selectable with mouse? was true. >>> >>> I recall that this used to work some years ago, but not anymore. I am using the latest daily build (v1.13 build 41684) on macOS v10.12.6. Is this a bug or have some settings changed? I couldn?t find anything referring to this in the docs. >>> >>> Best regards, >>> Priit >>> _______________________________________________ >>> Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu >>> Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users >>> >> > > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > ------------------------------ Message: 4 Date: Thu, 15 Mar 2018 20:27:15 +0200 From: Priit Eek <priit.eek(a)gmail.com> To: Tom Goddard <goddard(a)sonic.net> Cc: UCSF Chimera Mailing List <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Surface picking Message-ID: <D8228774-0335-4697-A2B5-4CDF453AF5B6(a)gmail.com> Content-Type: text/plain; charset=utf-8 Tom, Drag-selecting selects the atoms and ribbons, but not the MSMS surface, even if the atoms are behind the surface. However, I can select the molmap surface with both clicking and dragging. The MSMS surface is a solid. I haven?t done anything to surface display settings to my knowledge, so I should be using the default style. Priit > On 15 Mar 2018, at 20:13, Tom Goddard <goddard(a)sonic.net> wrote: > > Hi Prit, > > It seems like a graphics driver bug, but I haven?t seen this before where only surfaces cannot be selected. Did you try drag select ? that draws a rectangle and uses a different code path and maybe it would select the surface. If you use "molmap #0 5? to make a density map surface from molecule #0 can you select the resulting surface with ctrl-click? Are you showing your surface in mesh or some other unusual style? > > Tom > > >> On Mar 15, 2018, at 11:06 AM, Priit Eek <priit.eek(a)gmail.com> wrote: >> >> Elaine and Tom, >> >> Thank you for your replies. Selecting atoms and ribbons works as it should, but ctrl-clicking on surfaces has no effect whatsoever, be it before or after splitting. I could use Sc only because I selected the whole model using the command line. Splitting does work and I get a bunch of pieces, but I have no obvious way to select the distinct surfaces. Also, I?m afraid that using visiblePatches or any other method that involves selecting all residues that define the blobs would be extremely cumbersome in my case. As I said, if I ctrl-click on an atom or a ribbon, it gets selected, is highlighted in green, and the magnifying glass icon turns green as well. However, if I then ctrl-click on a surface, the selection is cleared (status bar displays ?selection cleared?). >> >> The graphics driver incompatibility actually seems a likely culprit. I think the previous time I used this feature, I was still on my old laptop. I am currently running Chimera on a 13-inch Early 2015 MacBook Pro (MacBookPro12,1). It has a built-in Intel Iris Graphics 6100 chipset. Could there be an easy hack/workaround on my side or a software patch? If not, then I guess I?ll go and finish that particular figure on another computer :) >> >> Cheers, >> Priit >> >> >>> On 15 Mar 2018, at 19:34, Tom Goddard <goddard(a)sonic.net> wrote: >>> >>> Hi Prit, >>> >>> I can select the split surface pieces of an MSMS surface with ctrl-click using Chimera 1.12. Does ctrl-click work to select atoms, or the original unsplit surface? If not then it is probably a graphics driver problem, since some graphics capabilities are needed to know what object is under the mouse. Another possible graphics driver problem is the green outline is not shown ? but if you select something the magnifying glass icon in the lower right corner of the main Chimera window (select inspector) should turn green. >>> >>> Tom >>> >>> >>>> On Mar 15, 2018, at 4:47 AM, Priit Eek <priit.eek(a)gmail.com> wrote: >>>> >>>> Hi, >>>> >>>> I am trying to visualize some specific inner cavities in a structure. I can display the MSMS surface and split it into pieces (accelerator Sc), but then I need to select the extra surfaces to hide/delete them (starting with the main outer surface). For some reason surface picking with mouse (Ctrl + left click) doesn?t work. I checked the surface attributes and ?selectable with mouse? was true. >>>> >>>> I recall that this used to work some years ago, but not anymore. I am using the latest daily build (v1.13 build 41684) on macOS v10.12.6. Is this a bug or have some settings changed? I couldn?t find anything referring to this in the docs. >>>> >>>> Best regards, >>>> Priit >>>> _______________________________________________ >>>> Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu >>>> Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users >>>> >>> >> >> >> _______________________________________________ >> Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu >> Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users >> > ------------------------------ Message: 5 Date: Thu, 15 Mar 2018 11:41:04 -0700 From: Tom Goddard <goddard(a)sonic.net> To: Priit Eek <priit.eek(a)gmail.com> Cc: UCSF Chimera Mailing List <chimera-users(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] Surface picking Message-ID: <5AB9B1A1-5920-4EF9-B2FD-EC66931D9670(a)sonic.net> Content-Type: text/plain; charset=utf-8 Hi Priit, That is especially weird that MSMS surfaces cannot be selected by ctrl-click while the molmap surface can be selected. The problem is either your machine?s graphics driver or one other idea it could somehow be some setting in your preferences file. You might try quiting Chimera, renaming your Chimera preferences file ~/.chimera/preferences so Chimera does not find it, and restarting and see if that helps. Tom > On Mar 15, 2018, at 11:27 AM, Priit Eek <priit.eek(a)gmail.com> wrote: > > Tom, > > Drag-selecting selects the atoms and ribbons, but not the MSMS surface, even if the atoms are behind the surface. However, I can select the molmap surface with both clicking and dragging. The MSMS surface is a solid. I haven?t done anything to surface display settings to my knowledge, so I should be using the default style. > > Priit > > >> On 15 Mar 2018, at 20:13, Tom Goddard <goddard(a)sonic.net> wrote: >> >> Hi Prit, >> >> It seems like a graphics driver bug, but I haven?t seen this before where only surfaces cannot be selected. Did you try drag select ? that draws a rectangle and uses a different code path and maybe it would select the surface. If you use "molmap #0 5? to make a density map surface from molecule #0 can you select the resulting surface with ctrl-click? Are you showing your surface in mesh or some other unusual style? >> >> Tom >> >> >>> On Mar 15, 2018, at 11:06 AM, Priit Eek <priit.eek(a)gmail.com> wrote: >>> >>> Elaine and Tom, >>> >>> Thank you for your replies. Selecting atoms and ribbons works as it should, but ctrl-clicking on surfaces has no effect whatsoever, be it before or after splitting. I could use Sc only because I selected the whole model using the command line. Splitting does work and I get a bunch of pieces, but I have no obvious way to select the distinct surfaces. Also, I?m afraid that using visiblePatches or any other method that involves selecting all residues that define the blobs would be extremely cumbersome in my case. As I said, if I ctrl-click on an atom or a ribbon, it gets selected, is highlighted in green, and the magnifying glass icon turns green as well. However, if I then ctrl-click on a surface, the selection is cleared (status bar displays ?selection cleared?). >>> >>> The graphics driver incompatibility actually seems a likely culprit. I think the previous time I used this feature, I was still on my old laptop. I am currently running Chimera on a 13-inch Early 2015 MacBook Pro (MacBookPro12,1). It has a built-in Intel Iris Graphics 6100 chipset. Could there be an easy hack/workaround on my side or a software patch? If not, then I guess I?ll go and finish that particular figure on another computer :) >>> >>> Cheers, >>> Priit >>> >>> >>>> On 15 Mar 2018, at 19:34, Tom Goddard <goddard(a)sonic.net> wrote: >>>> >>>> Hi Prit, >>>> >>>> I can select the split surface pieces of an MSMS surface with ctrl-click using Chimera 1.12. Does ctrl-click work to select atoms, or the original unsplit surface? If not then it is probably a graphics driver problem, since some graphics capabilities are needed to know what object is under the mouse. Another possible graphics driver problem is the green outline is not shown ? but if you select something the magnifying glass icon in the lower right corner of the main Chimera window (select inspector) should turn green. >>>> >>>> Tom >>>> >>>> >>>>> On Mar 15, 2018, at 4:47 AM, Priit Eek <priit.eek(a)gmail.com> wrote: >>>>> >>>>> Hi, >>>>> >>>>> I am trying to visualize some specific inner cavities in a structure. I can display the MSMS surface and split it into pieces (accelerator Sc), but then I need to select the extra surfaces to hide/delete them (starting with the main outer surface). For some reason surface picking with mouse (Ctrl + left click) doesn?t work. I checked the surface attributes and ?selectable with mouse? was true. >>>>> >>>>> I recall that this used to work some years ago, but not anymore. I am using the latest daily build (v1.13 build 41684) on macOS v10.12.6. Is this a bug or have some settings changed? I couldn?t find anything referring to this in the docs. >>>>> >>>>> Best regards, >>>>> Priit >>>>> _______________________________________________ >>>>> Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu >>>>> Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users >>>>> >>>> >>> >>> >>> _______________________________________________ >>> Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu >>> Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users >>> >> > > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > ------------------------------ Subject: Digest Footer _______________________________________________ Chimera-users mailing list Chimera-users(a)cgl.ucsf.edu Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users ------------------------------ End of Chimera-users Digest, Vol 179, Issue 6 *********************************************

2 5

defining attribute from python
by Wood Ortiz, Francisca (NIH/NEI) [F] 27 Mar '18

27 Mar '18

Hello, I am a post-bac fellow at the NEI/NIH working with protein modeling. We are hoping to automate a procedure which requires the protein structure to be colored using an attribute file and exported as an .html and .py session. We would like this to be completed from the command line without the need to open the Chimera graphics window. Could this be done? Thank you for your help. Best, Francisca Wood Ortiz Postbaccalaureate Fellow, Ophthalmic Genetics and Visual Function Branch, NIH/NEI

2 1

Chimera Help Desk: Missing Output file
by Arturo Estolano Cobián 26 Mar '18

26 Mar '18

Dear Chimera Help Desk, I have a problem while running molecular docking on Chimera. After running Tools --> Surface/Binding Analysis --> AutoDock Vina, I do not get the results from the docking analysis. I get the regular *name*.receptor.pdb , *name*.receptor.pdbqt , *name*.ligand.pdb , *name*.ligand.pdbqt and *name*.conf files, but the *name* file (the docking results) does not generate. In the Reply Log I found this, which I assume is involved in the problem: standard error ----- Unable to initialize environment because of error: cannot register event client. Only 99 event clients are allowed in the system Exiting. ----- Traceback (most recent call last): File "C:\Program Files (x86)\Chimera 1.11.2\share\chimera\tasks.py", line 179, in runStatusCB task.statusCBList[0]() File "C:\Program Files (x86)\Chimera 1.11.2\share\WebServices\appWebService.py", line 171, in statusCB self.finishCB(self.backend, fileMap) File "C:\Program Files (x86)\Chimera 1.11.2\share\vina\ws.py", line 179, in _wsFinish raise NonChimeraError("No data file returned from " NonChimeraError: No data file returned from AutoDock Vina web service And I can't find how to solve this and get the results from the docking experiments I'm doing. Can you please help me solve this problem? Thank you in advance for your attention. Arturo Estolano Cobián <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Libre de virus. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 2

vina error
by Sofia Vasilakaki 25 Mar '18

25 Mar '18

Dear Chimera developers, I am trying to run vina 1.1.2 on opal server and I am getting the following error: Unable to initialize environment because of error: cannot register event client. Only 99 event clients are allowed in the system Exiting Any suggestions? Thank you, Sofia

1 0

Custom Preset Folder not detecting any scripts
by Eiros Zamora, Juan 22 Mar '18

22 Mar '18

Hello everyone, >From what I’ve gathered, I can save custom presets in a text file with Chimera commands, directly as I would type them in the Command console. So for example my custom preset file is simple, for testing purposes: ribbon protein color white protein repr sphere :CAL disp :CAL I’ve saved the file with a .com extension (as specified here http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/preferences.html#Presets) and then indicated the directory it’s in by Clicking on Presets > Add Custom Presets … (after selecting it, I press the Save button). >From here, I’m a bit lost. I think the file is not detected as I get no new options under the Presets tab, nor does the command `preset list c` give any output in the Reply log. Also closing and opening Chimera again does not help (although the custom preset folder is remembered if I try the previous steps). What am I doing wrong? Best regards, Juan

2 2