- Chimera-users - RBVI Mailing Lists

odd chimera benchmark performance
by Dan Lin 13 Aug '15

13 Aug '15

Hello: I was wondering if anyone had any experience tracking down performance problems in chimera. I've noticed that I am getting really sluggish performance when managing a lot of atoms, even when everything is shown as backbone traces only. To take a look at the performance, I ran the benchmark and got the following numbers: Volume benchmark scores surface mesh contour solid recolor 981 1291 280 589 393 Null Wire Stick BStick Ribbon Sphere Ops 6249.5 158.7 1.5 0.9 27.4 0.4 89.3 compared to a benchmark posted on the website of the same graphics card: 2125 2026 302 512 491 213 492 452 3259 169 128 Apparently I'm getting awful benchmarks for most of the molecule benchmarks, while the volume performance is pretty comparable. I re-ran the molecule benchmarks to make sure they were reproducible and got pretty much the same numbers. Would anybody have any suggestions for figuring out what's going on? For reference, I'm running ubuntu 12.04 with up to date nvidia drivers for a GTX 560 Ti. Thanks, Dan

3 4

axis-axis distance definition
by Oliver Clarke 13 Aug '15

13 Aug '15

Quick question - how is the distance between two axes (as reported by Axes/Planes/Centroids) calculated? Is it the minimum distance between two axes (I guess yes, because it does not seem to match the center to center distance)? And does it assume the axes are of infinite length, and calculate the displacement required for them to intersect, or does it measure the minimum distance between the axes with the length and end positions as displayed? Cheers, Oliver.

3 3

place label at arbitrary position in 3D
by Oliver Clarke 13 Aug '15

13 Aug '15

In case it is useful to anyone else - I was trying to figure out a way to place a label at an arbitrary position in 3D, so that I can for example generate a chimera session of a protein with all helices labeled and annotated appropriately. I couldn’t figure out a way to easily do this with the built in tools (rlabel, labelopt etc all seem to require you to set an offset from an atom in the structure), so I made the following alias, which gets around this by placing an invisible marker atom at the center of rotation (which I mostly keep locked to the center of view), and attaching a label to that. Hope it is useful to somebody else too. #Place label here (at center of rotation). #Usage: label_here "label_text" (replace spaces in desired label text with _; they will be replaced by spaces in label) alias ^label_here ~sel; ac mc; color black sel; repr bs sel; vdwdefine 0.01 sel; setattr a label $1 sel; transparency 100,a sel; ~sel Cheers, Oliver.

1 0

curved helices - cylinder representation?
by Oliver Clarke 12 Aug '15

12 Aug '15

Hi all, I’d like to have an extended version of the “Pipes and planks” representation, where helices are represented as cylinders, except as a regular, easily modifiable ribbon representation, and allowing for helix curvature rather than breaking up curved helices. I realize this is not currently implemented and is unlikely to be addressed until Chimera 2.0 due to the many other more important things on the drawing board, so I’m trying to figure out a way to hack something together that will generate acceptable results in the meantime. I figure that one way to do this might be to use a create a pdb file with guide atoms located on the helix axis, which one can approximate by placing a guide atom (P or CA) at the center of mass of a six residue sliding window of C-alpha atoms, and then use these guide atoms to create a thick, smoothed (with B-spline) licorice tube. This works quite well for an individual helix, as you can see in the attached pics, but I am a little at a loss as to how to automate this procedure across all the helices in a structure, or even for a given (selected) helix (and it’s only really the helices I care about - strands are fine as is, but having a curved cylinder representation for helices would be very handy). I guess I can do so using a python script of some sort, but if anyone has any pointers as to how to get started, they would be most appreciated. So I guess I need to loop through all the residues in a selection, calculating the center of mass in a sliding window and placing atoms as appropriate, then write out a pdb file with appropriate atom names. This shouldn’t be too hard, but if anyone can point me towards code that I can adapt for this purpose it would be most helpful. Cheers, Oliver.

2 1

question
by A G Szabo 11 Aug '15

11 Aug '15

Today I was trying to Fetch a series of files from the PDB. Their accession codes are 3J7O, 3J7Q, 3J7R, and 3J7P. These are structures of the ribosome complexed with a trimeric translocon, Sec61. Each time Chimera responded with an error message indicating that there was no such file. The files come from a paper by R M Voorhees, (2014) Cell 157:1632. I went to the PDB website and was able to access each of the files. So they do exist. However, when I tried to visualize them using Protein Workshop the structure that appeared was a mixture of surfaces and ribbon structures. I was not able to do anything with any of the structures using Protein Workshop. I could not delete any of the several components, nor change them to ribbon structures. I have been able to fetch, using Chimera, other PDB files that have the entire ribosome complexed with proteins of interest. I sent a message to PDB relating what I have encountered and am waiting for a response. My question to Chimera is to determine if there is a work around to get at any of these files. Thank you Arthur G. Szabo Professor Emeritus Chemistry Wilfrid Laurier University

2 1

is Chimera able to do spin albeling in silico
by Shu-Hao Liou 10 Aug '15

10 Aug '15

Hi, Thank you for reading this email. I'd like to have a rough protein structure with certain spin label on one of the cysteine. Is chimera be able to provide the reasonable structure for that? Sincerely, Shu-hao Liou UC Davis

2 1

Attribute "distance" generated by shortcut "ac sd" not saved between sessions?
by Oliver Clarke 10 Aug '15

10 Aug '15

Hi all, I use the command “ac sd” to color dotted surfaces such as the attached by pore radius (I generate a molmap surface corresponding to the channel axis and then use "ac sd" to generate an attribute “distance", which in this case corresponds to the pore radius, which I can then use to color the dotted surface pdb using Render by Attribute). The dotted surface is generated using the program HOLE (http://www.smartsci.uk/hole/) along with the attached script to make it readable by chimera. This all works fine, however I have noted that the attribute generated by "ac sd” is not present when I reload the saved session, whereas other attributes (e.g. those created explicitly with defattr) are. I can just regenerate it of course, but it would be convenient if it were saved with the session, as it can take a while (~10 minutes) to calculate for large dotted surfaces. Cheers, Oliver.

3 6

A video of 'view dock'
by Amali Guruge 10 Aug '15

10 Aug '15

Dear All, Can we save the movie play in 'view dock' option? Can anyone help me? Thank you.

2 1

Re: [Chimera-users] PDB: 3NZ4 (Chimera vs Pmol Visualization)
by Elaine Meng 07 Aug '15

07 Aug '15

Hi Kevin, What you are seeing is weird-looking bonds between the ribbon and the residues named MDO. It is an artifact caused by the default smoothing of the ribbon path, the amino acid derivation of MDO, and the default hiding of “backbone” atoms in Chimera when the ribbon is displayed. More on that here, if anybody wants details... <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/ribbonstyle/ribbo…> As you found, you could just show atoms without ribbons to solve the problem. However, if you really wanted to show ribbons at the same time, here are some choices as to what you could do in Chimera to make it look less deformed: (1) enable display of all atoms of the MDO at the same time as the ribbon, for example with command: ribbackbone .. however, side effects you may not like are that this will also show backbone atoms of the other residues that are displayed, and MDO and these other residues may be obviously detached (as if “floating” away) from the smoothed ribbon. You could try hiding the backbone atoms of the other residues with: ~disp @n,c,o & ~:mdo … or you could go back to the original behavior of disabling simultaneous backbone-atom and ribbon display with: ~ribbackbone (2) use a non-smoothed ribbon path that is forced to go through the CA atoms, for example with command: ribspline cardinal … however, this is still ugly because the ribbon makes a sharp turn near this derived residue, and the methyl group comes off of the ribbon at a strange angle. You can go back to the default ribbon path with: ribspline b Sorry, neither makes a beautiful picture. But I hope this helps to explain what is going on. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco Pictures before and after using “ribbackbone” command:

1 0

PDB: 3NZ4 (Chimera vs Pmol Visualization)
by Kevin D. Walker 07 Aug '15

07 Aug '15

A specialized prosthesis within the PDB 3NZ4 structure looks proper in Pmol but looks skewed in Chimera (my choice), and I wonder why the prosthesis is rendered as such in Chimera? Kevin ---------------------------------- Kevin D Walker Associate Professor Michigan State University Department of Chemistry and Department of Biochemistry & Molecular Biology 578 S Shaw Lane; Room 208 East Lansing, MI 48824 Phone: 517 355 9715 x 257 Fax: 517 353 1793 websites: 1) http://bmb.natsci.msu.edu/about/directory/faculty/kevin-d-walker/current-re…

2 1

clipping and capping
by George Tzotzos 07 Aug '15

07 Aug '15

I’m a real novice in this kind of operation so I shall try in some detail what I’m trying to achieve. I’m dealing with a long serendipitous ligand that spans through a homodimer (2erb) (see screenshot1). I would like to generate something like the B-factor colouring feature (http://www.cgl.ucsf.edu/chimera/features.html <http://www.cgl.ucsf.edu/chimera/features.html>). I’ve opened the Depiction tool and tried surface clipping and capping to no avail. Reading the manual, I figured out that first I have to generate a volume and then use the sop clip command. If this is the routine, I’m seeking advice on how to generate the volume data and then pass it to the sop clip command. As always grateful for your kind help Regards George

2 1

Changing license agreement email
by Flaherty, Daniel P 07 Aug '15

07 Aug '15

Hello, I am using the academic license agreement for Chimera from my previous position at the University of Kansas. However, I have now moved to Purdue and am starting my own laboratory. I would like to utilize Chimera in my lab. I sent an email earlier regarding generating spheres when preparing a protein for docking from my Purdue email and it told me I was not a registered user. I subsequently re-sent the email from my KU email since that is what I was licensed under. Long story short. How to I switch the license agreement to recognize my Purdue email as the registered user? Do I need to un-install Chimera and go through the steps to accept the academic licensing again using my new Purdue email account? Sorry for the confusing email. Thanks! Dan Daniel P. Flaherty, Ph.D. Assistant Professor Department of Medicinal Chemistry and Molecular Pharmacology Purdue University dflaher(a)purdue.edu Office - (765) 494-4761 [cid:8F36A2D2-6664-4FA0-B72D-D785C950B081]

2 1

Placing markers in specific points of an EM map using command line
by Ana Lucia Alvarez Cabrera 07 Aug '15

07 Aug '15

Dear colleagues, I would like to know how can I place markers in specific points within an EM map, using commands (and not the Volume Tracer option in the graphic interface). I am doing a movie and I need to place markers in different regions of a map. By placing the markers first manually with the mouse (using the Volume Tracer option in the graphic interface) into the map and saving the respective marker set I can know the specific coordinates for each marker by reading the output marker file "suffix.cmm" (for example: <marker id="1" x="22.28" y="24.608" z="17.976" r="1" g="0.49804" b="0" radius="2"/> ), but I still don't know how to use this information when writing the command for placing the marker in that position. Thanks in advance, Ana-Lucia

3 7

Re: [Chimera-users] Help Generating Spheres
by Repic Matej 07 Aug '15

07 Aug '15

Dear Daniel, The error you are getting only says that the sphgen program is not in your $PATH and therefore the shell cannot find the executable to run. Make sure you have installed DOCK6, which is not bundled with Chimera. You need to apply for the DOCK6 license (free for academia) and the "sphgen" program will be bundled with it. Apply here: http://dock.compbio.ucsf.edu/Online_Licensing/dock_license_application.html After you have made sure DOCK6 is properly installed by following the instructions below, you can follow all the tutorials available online. http://dock.compbio.ucsf.edu/DOCK_6/dock6_manual.htm#Installation Best, Matej ------------------------------------------------------ Dr. Matej Repic Ecole Polytechnique Fédérale de Lausanne Laboratory of Computational Chemistry and Biochemistry SB - ISIC – LCBC BCH 4108 CH - 1015 Lausanne ------------------------------------------------------ From: <chimera-users-bounces(a)cgl.ucsf.edu<mailto:chimera-users-bounces@cgl.ucsf.edu>> on behalf of "Flaherty, Daniel P" <dflaher(a)purdue.edu<mailto:dflaher@purdue.edu>> Date: Friday, August 7, 2015 at 04:38 To: "chimera-users(a)cgl.ucsf.edu<mailto:chimera-users@cgl.ucsf.edu>" <chimera-users(a)cgl.ucsf.edu<mailto:chimera-users@cgl.ucsf.edu>> Subject: [Chimera-users] Help Generating Spheres Hello, I’m teaching myself to perform molecular modeling and docking using your tutorials. I am trying to prepare a protein for a vHTS and I have run into a snag during the sphere generation tutorial (http://dock.compbio.ucsf.edu/DOCK_6/tutorials/sphere_generation/generating_…) In the section where it says,"To generate the spheres, simply use the command "sphgen" in the same folder that contains the INSPH and the rec.ms files. The output will be two files: rec.sph<http://dock.compbio.ucsf.edu/DOCK_6/tutorials/sphere_generation/rec.sph>, which contains the spheres in clusters, and OUTSPH<http://dock.compbio.ucsf.edu/DOCK_6/tutorials/sphere_generation/OUTSPH>, which contains general information about the calculation.” I am getting an error that says Unrecognized command: “sphgen”. I downloaded the INSPH text file but I have no idea what to do with it. I don’t know what “folder” the tutorial refers to when it says,”use the command ‘sphgen’ in the same folder that contains the INSPH and rec.ms files." Any help would be greatly appreciated! Thanks, Dan

1 0

Help Generating Spheres
by Flaherty, Daniel P 06 Aug '15

06 Aug '15

Hello, I’m teaching myself to perform molecular modeling and docking using your tutorials. I am trying to prepare a protein for a vHTS and I have run into a snag during the sphere generation tutorial (http://dock.compbio.ucsf.edu/DOCK_6/tutorials/sphere_generation/generating_…) In the section where it says,"To generate the spheres, simply use the command "sphgen" in the same folder that contains the INSPH and the rec.ms files. The output will be two files: rec.sph<http://dock.compbio.ucsf.edu/DOCK_6/tutorials/sphere_generation/rec.sph>, which contains the spheres in clusters, and OUTSPH<http://dock.compbio.ucsf.edu/DOCK_6/tutorials/sphere_generation/OUTSPH>, which contains general information about the calculation.” I am getting an error that says Unrecognized command: “sphgen”. I downloaded the INSPH text file but I have no idea what to do with it. I don’t know what “folder” the tutorial refers to when it says,”use the command ‘sphgen’ in the same folder that contains the INSPH and rec.ms files." Any help would be greatly appreciated! Thanks, Dan

1 0

Morphing with pipes and planks
by Tom Goddard 06 Aug '15

06 Aug '15

Hi Corey, Pipes and planks depictions don’t update when the molecule changes shape. It is also slow to compute so it wouldn’t work interactively. But if you want to make a movie it can be done with some trickery. The tricky part is that there is no command to make the pipes and planks depiction. But a few lines of Python (file updatepp.py attached) can update the pipes and planks. So after creating the morph and the initial pipes and planks I can record a movie with the following command sequence: movie record super 3 ; coordset #2 0,100 ; perframe "open /Users/goddard/ucsf/chimera/libs/PipesAndPlanks/updatepp.py" frames 100 ; wait 100 ; movie encode ~/Desktop/planks.mp4 Tom > On Aug 6, 2015, at 2:35 PM, Corey Dambacher wrote: > > Hi Tom, > > Gabe lander suggested I email you regarding morph maps between two models: > > Is there a way to do a morph using pipes and planks? I have a couple of models I would like to morph, and this works very well when in ribbon, but it doesn't seem to work when I have the pipes and planks depiction... > > Thanks for your time and consideration, > > Corey

1 0

vop cover for maps from EDS server?
by Oliver Clarke 05 Aug '15

05 Aug '15

Hi all, I would like to use the command ‘vop cover’ (https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/vop.html#cover) with option fbox so that I can easily extend 2fo-fc maps downloaded from the EDS using ‘Fetch by ID’ to cover multiple unit cells. At the moment, this command does not seem to respect the lattice symmetry of the input map (see attached) - is there any way to make it do so? I have tried explicitly specifying the option ‘useSymmetry true’, but it shows the same behaviour. The example PDB ID I used for the attached screenshot was 3CH3. Cheers, Oliver.

2 3

How to find a specific motif from a protein structure?
by Jing Tang 05 Aug '15

05 Aug '15

Hi, I would like to know how to identify a given motif such as DFG in a protein kinase structure. I have thought to use "select: asp,phe,gly" but it found all the residues rather than the motif. A related question would be then how to identify the activation loop or other more specific domains such as p-loop p+1 loop etc. from a structure. Thanks, Jing

2 1

How to record the movie in the main window as well as in the sideview window?
by zhongjun hu 05 Aug '15

05 Aug '15

Hello, Everyone: I want to record the movie of main window as well as the side view window. Until now, I haven't find any simple way. Are there any suggestions or ideas? Thank you so much! Best, Zhongjun Hu 08/05

2 1

opening *cif format
by Dmitry 05 Aug '15

05 Aug '15

Dear Colleagues, I'm trying to open 4fe1-sf.cif file with chimera 1.10.2. But nothing is happening. Although the program saying : "Done opening ....." Could you please explain how to open *cif files ? Sincerely, Dmitry

2 1

FoxS in Chimera for SAXS curve fitting
by Eugene Valkov 05 Aug '15

05 Aug '15

I was wondering what version of FoxS the current release of Chimera employs for goodness-of-fit calculations to small-angle X-ray scattering curves using crystal structure models? Also, if any specific parameters are used other than what is default? I obtain quite different values using standalone FoxS binary or using the online server versus what is output by Chimera. Thanks, Eugene

3 5

multiple (redundant) distances in command line >file.txt
by Olexandr Dybkov 04 Aug '15

04 Aug '15

Dear UCSF Chimera team, I am trying to measure and draw multiple distances by pasting into the command line respective commands. As outcome I would like to have: 1. the dashed lines between each pair of atoms that I am checking 2. the distances shown above/on the lines 3. a log or a file with all the distances checked (one line per each distance command I executed) For example, dist :540@ca/pdbSegment=A :573@ca/pdbSegment=A dist :453@ca/pdbSegment=B :479@ca/pdbSegment=B dist :695@ca/pdbSegment=B :395@ca/pdbSegment=A dist :2059@ca/pdbSegment=B :1421@ca/pdbSegment=B dist :426@ca/pdbSegment=B :944@ca/pdbSegment=B dist :2059@ca/pdbSegment=B :1514@ca/pdbSegment=D dist :2059@ca/pdbSegment=B :1417@ca/pdbSegment=B dist :1421@ca/pdbSegment=B :2059@ca/pdbSegment=B dist :421@ca/pdbSegment=C :439@ca/pdbSegment=C dist :453@ca/pdbSegment=B :487@ca/pdbSegment=B and so on Resulting in Distance between #50 LYS 540 CA and #50 LYS 573 CA: 13.0 Distance between #35 LYS 453.B CA and #35 LYS 479.B CA: 22.7 Distance between #35 LYS 695.B CA and #50 LYS 395 CA: 8.8 Distance between #35 LYS 2059.B CA and #35 LYS 1421.B CA: 20.5 Distance between #35 LYS 426.B CA and #35 LYS 944.B CA: 25.7 Distance between #35 LYS 2059.B CA and #53 LYS 1514.T CA: 115.7 Distance between #35 LYS 2059.B CA and #35 LYS 1417.B CA: 15.2 Distance monitor already exists That is, 8 out of 10 distances were checked. Since the 8th line was a swap of atom1 and atom2 of 4th, the Chimera Error window popped up and execution of further commands was stopped Similarly, the execution is interrupted if: - one or both atoms are missing - one or both atoms are present in multiple copies - if such distance was checked already Is there a way to ignore/skip this kind of check points and just report such cases in the log? I used to do this in pymol and the python script reported all distances (even redundant) and errors (atom 1 or/and atom 2 are missing) without stopping. At the end I had a txt file with exactly one line for each command. It would be nice to have the same functionality in UCSF Chimera as well. Thank you very much for your help! Kind regards, Olexandr -- ----------------------------------------------------------------- Dr. Olexandr Dybkov Max-Planck-Institute for Biophysical Chemistry Department of Cellular Biochemistry Am Fassberg 11 37077 Göttingen Germany Tel. ++49-551-201 1979 Fax ++49-551-201 1197 email: odybkov(a)gwdg.de ----------------------------------------------------------------

2 1

Coloring an specific area along a morphing serie among several maps
by Ana Lucia Alvarez Cabrera 04 Aug '15

04 Aug '15

Dear Srs, I made a chimera movie where six different conformations of the same complex are morphed in a sequence, changing on to the next one (the aim is showing a conformational change occurring in a number of steps, in this case the six electron microscopy maps). My complex has an specially flexible domain and I need to highlight this area along the morphing sequence of the six maps. I suppose that this can be done using the markers and color zone options, but I don't know how to implement this orders in the .cmd script of my movie. Thanks in advance for your help. Sincerely, Ana-Lucia ________________________________ Ana Lucia Alvarez Cabrera Unidad de Bioinformática. Lab. B-13 Dept. Estructura de Macromoléculas Centro Nacional de Biotecnología (CSIC) C/ Darwin 3, Campus de Cantoblanco 28049, Madrid, España Tel: (34) 915854510

3 3

Re: [Chimera-users] Mirror image proteins
by Elaine Meng 04 Aug '15

04 Aug '15

Dear Dikran, You would need to open the structure before running the script, otherwise the script has nothing to work on. Elaine > On Aug 4, 2015, at 12:22 PM, Sarko, Dikran <dikran.sarko(a)yahoo.com> wrote: > > Dear Elaine, > > Thank you very much for your reply. > I am not familiar with programing, however, I did exactly as described in the page you had refered to. > > import chimera > m = chimera.openModels.list()[0] > for a in m.atoms: > crd = a.coord() > crd.x = 0 - crd.x > a.setCoord(crd) > > then I opened the 4LLZ pdb file as a test, however when I saved the structure and tried to combare it with the original one. Chimera opened only one structure (not tow as I expected). > > Is there anything wrong, ore any additional advice. > > PS: I suggest to incorporate an additional function in the next release of Cheimera that consider the generation of mirror image protein of pdb file as a function within the tools, or other appropriate function. Such function will attract a lot of attention, and Cheimera will be (to my knowledge), the 1st modeling program that offer such a function. > > Thank you very much > Dikran > > Von: Elaine Meng <meng(a)cgl.ucsf.edu> > An: "Sarko, Dikran" <dikran.sarko(a)yahoo.com> > CC: Mailing List <chimera-users(a)cgl.ucsf.edu> > Gesendet: 19:54 Montag, 3.August 2015 > Betreff: Re: [Chimera-users] Mirror image proteins > > Hello Dikran, > Only with a little scripting, but somebody asked the same thing a few years ago and a simple python script was posted to the list. Please see: > > <http://plato.cgl.ucsf.edu/pipermail/chimera-users/2011-January/005882.html> > <http://plato.cgl.ucsf.edu/pipermail/chimera-users/2011-January/005883.html> > > Remember that in python the indentation is important. > I hope this helps, > Elaine > ---------- > Elaine C. Meng, Ph.D. > UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab > Department of Pharmaceutical Chemistry > University of California, San Francisco > > > > > > On Aug 2, 2015, at 1:11 PM, Sarko, Dikran <dikran.sarko(a)yahoo.com> wrote: > > > > Hello, > > is there any way to generate mirror image proteins (All AA in D-form) from an already exsist pdb file. > > Thank you in advance > > Dikran > >

1 0

segment map & mesh view
by Dmitry 04 Aug '15

04 Aug '15

Dear Colleagues, Does anybody know how to: 1. Delete selected segment from segment map and save the result. 2. Change the mesh view properties - because for the volume the mesh size is different then for the segment map. Sincerely, Dmitry

2 1

Feature suggestion - turn about pre-defined axis.
by Oliver Clarke 03 Aug '15

03 Aug '15

Hi all, Just have a minor feature suggestion that I think would make the command “turn” more useful in certain circumstances. Currently, one can use “turn” to rotate about the x,y or z axes; an arbitrary vector; or about a bond or pair of selected atoms (http://www.cgl.ucsf.edu/chimera/current/docs/UsersGuide/midas/turn.html) Would it be possible for chimera to treat a predefined axis (e.g a helix axis, or the symmetry axis of an ion channel) as an atom-spec for the purposes of turn? As an example, “turn a1 45” would rotate 45 degrees about axis a1, with the default center of rotation corresponding to the midpoint of the axis. This would be very helpful for adjusting the relative orientations of symmetric oligomers, amongst other use cases. Cheers, Oliver.

3 3

Mirror image proteins
by Sarko, Dikran 03 Aug '15

03 Aug '15

Hello, is there any way to generate mirror image proteins (All AA in D-form) from an already exsist pdb file. Thank you in advanceDikran

2 1

Average structure
by George Tzotzos 03 Aug '15

03 Aug '15

Hi everybody, I’m analysing the Principal Components of an Amber trajectory. I have generated a number of representative pdb files which are concatenated for each PC. Question: Is there a way to generate an average structure in Chimera from the concatenated PDB files? I know this can be done using MD movie but this solution requires that I generate a new topology file for my complex (the original topology file contains ligands and water molecules). Thank you in advance for any suggestions Regards George

2 4

Re: [Chimera-users] Chimera-users Digest, Vol 148, Issue 6
by feisun＠ibp.ac.cn 03 Aug '15

03 Aug '15

From: feisun(a)ibp.ac.cn Subject: I am in a vacation. I am now taking a vacation from Aug. 1st to Aug. 9th. I will reply to you after Aug. 10th. Sorry for the delay. Fei

1 0

Re: [Chimera-users] Chimera-users Digest, Vol 148, Issue 5
by feisun＠ibp.ac.cn 03 Aug '15

03 Aug '15

From: feisun(a)ibp.ac.cn Subject: I am in a vacation. I am now taking a vacation from Aug. 1st to Aug. 9th. I will reply to you after Aug. 10th. Sorry for the delay. Fei

1 0

Morphing a residue through MD trajectories
by George Tzotzos 02 Aug '15

02 Aug '15

Hi, I have an MD trajectory which I can load successfully on Chimera. My objective is to monitor changes in conformations of one particular residue in the receptor (:123) throughout the trajectory and generate a movie. If I could do this in tandem with a bound ligand so much the better. I’ve tried to follow the instructions but obviously, I get it wrong. I opened the Morph Conformations tool, I selected the trajectory and clicked on Add. This generated a 2nd MD Movie panel of just one frame. Any help would be most welcome Regards George

3 7

Re: [Chimera-users] Chimera-users Digest, Vol 148, Issue 4
by feisun＠ibp.ac.cn 02 Aug '15

02 Aug '15

From: feisun(a)ibp.ac.cn Subject: I am in a vacation. I am now taking a vacation from Aug. 1st to Aug. 9th. I will reply to you after Aug. 10th. Sorry for the delay. Fei

1 0

Re: [Chimera-users] Chimera-users Digest, Vol 148, Issue 3
by feisun＠ibp.ac.cn 01 Aug '15

01 Aug '15

From: feisun(a)ibp.ac.cn Subject: I am in a vacation. I am now taking a vacation from Aug. 1st to Aug. 9th. I will reply to you after Aug. 10th. Sorry for the delay. Fei

1 0

Re: [Chimera-users] Chimera-users Digest, Vol 148, Issue 2
by feisun＠ibp.ac.cn 01 Aug '15

01 Aug '15

From: feisun(a)ibp.ac.cn Subject: I am in a vacation. I am now taking a vacation from Aug. 1st to Aug. 9th. I will reply to you after Aug. 10th. Sorry for the delay. Fei

1 0

Re: [Chimera-users] Chimera-users Digest, Vol 148, Issue 1
by feisun＠ibp.ac.cn 01 Aug '15

01 Aug '15

From: feisun(a)ibp.ac.cn Subject: I am in a vacation. I am now taking a vacation from Aug. 1st to Aug. 9th. I will reply to you after Aug. 10th. Sorry for the delay. Fei

1 0

Open model from pdb with designated model id?
by Oliver Clarke 31 Jul '15

31 Jul '15

Hi all, I would like to write an alias to load a pdb and the associated 2fo-fc and fo-fc maps with a single command (and adjust the contours and appearance of the maps and model). To do this, I need to be able to open the models with specific output ids, so I can issue commands to alter their appearance later in the alias. Looking at the documentation (http://www.cgl.ucsf.edu/chimera/current/docs/UsersGuide/midas/open.html <http://www.cgl.ucsf.edu/chimera/current/docs/UsersGuide/midas/open.html>), it seems like this should be possible, but when I give an output model id it seems that chimera is ignoring it and still choosing the lowest available id. I have tried the following commands, “open 1bl8 100”, “open 1bl8 #100”, “open 1bl8 model-id:100” but they all either fail or load 1bl8 with model id 1. Am I missing something about the syntax here? Or is there another flag for the output model id? Cheers, Oliver.

2 2

Option to not record duplicates in the command history?
by Oliver Clarke 31 Jul '15

31 Jul '15

Hi all, I like the command history in chimera a lot - it makes it very quick to repeat previous commands. One minor alteration that might make it a little bit better would be to have an option (maybe in the Command Line section of the preferences?) to not record sequential duplicate commands in the history (like the “ignoredups” option for the bash history). I will often repeat the same command a bunch of times (for example “turn x 5” or one of the various aliases I use for navigation and recentering), and so not having all these duplicates recorded in the history would make it a lot faster to find recently used commands. Cheers, Oliver.

2 2

Addh function and fake N, C-terminii
by gaelle garet 31 Jul '15

31 Jul '15

Hi, I want to use Addh function to add hydrogens and protonate N, C-terminii but I don't understand very well how you detect if a terminus is fake or not. For example, for the structure 3L4F, I obtain the following log : Chain-initial residues that are actual N terminii: MET 586.A, MET 586.B, MET 586.C Chain-initial residues that are not actual N terminii: GLY 652.D Chain-final residues that are actual C terminii: LEU 646.A, LEU 646.B Chain-final residues that are not actual C terminii: ASP 638.C, ARG 758.D I don't understand why GLY 652.D, ASP638.C and ARG 758.D are not terminii, can you explain me why and how the algorithm detect that ? Thank you in advance for your answer. -- Gaëlle

2 1

How to explore two protein structures on the same screen?
by Jing Tang 31 Jul '15

31 Jul '15

Hi, I opened two protein structures, say 2JIT and 4WA9 and they were partially overlapped on the screen. How to move one protein so that they can be separated more? I can only move the two proteins as a whole but not individually. Further, I would like to highlight one residue for a particular protein and I could not find a way to first select a protein and then a residue. Thanks, Jing

2 2

Recent problems with linux x64 version
by Peter L. 30 Jul '15

30 Jul '15

Hello, Recently I used Chimera for a internship/volunteer work with my older brother, and it did not start up due to some seemingly graphics drivers problems. I'm running Ubuntu 15.04 on a AMD radion 5450M on this machine and NVidea gtx 760 on another. Both would not start up due to having libGL error: unable to load driver: nouveau_dri.so etc etc, as so documented here: http://plato.cgl.ucsf.edu/pipermail/chimera-users/2015February/010734.html (Error from the NvIdia machine) and would not load r600. However both had the same fix, that seemigly works by removing the file /Chimera64-1.10.2/lib/libstdc++.so.6, I renamed it to libstdc++.so.6.bak in case I might need it, but it works on both machines now. It seems as some older libs are colliding with mesa drivers, and casung them to break, and removing this fixes the problem. Its been documented before with other programs here, where the fix is simular. http://askubuntu.com/questions/614422/problem-with-installing-steam-on-ubun… I also found that in the chimera mail I found, it was recommend to update some drivers, or Nvidia drivers, however, nvidia drivers for linux tend to break the system a lot or cause other problems. Hope this helps!, Peter

2 1

Volume level rms option
by Oliver Clarke 30 Jul '15

30 Jul '15

Hi all, Just a minor usability suggestion - I was wondering if it would be possible to add a flag to the ‘volume level’ command that allows the user to directly set the map threshold to x*RMS or x*SD? E.g. volume level rms 5 to set to 5xRMS of the map, using the values reported by measure mapstats? At present it is possible to normalize the map to rms, which is very handy, but it would be also convenient (for the purposes of reporting absolute threshold levels in figure legends etc) to be able to set the level as 5*rms but still check the absolute e-/Å^3 contour that this corresponds to. Also on a completely different matter, is there any way to access the “Zone” feature of Volume viewer from the command line? I would like to write an alias that places a dummy atom at the CoFR and displays a spherical zone of the selected map (without generating a new map using vop zone), but I can’t find the corresponding command line function. Cheers, Oliver.

3 6

Useful aliases
by Oliver Clarke 30 Jul '15

30 Jul '15

Attached are a bunch of aliases that I find very useful in Chimera. Usage and intended purpose of the alias is described in the #comments immediately preceding the alias. Some of these will only work in the latest nightly build because they take advantage of command options that were only added recently. Hopefully someone else finds these useful too! If any other chimera users have aliases or shortcuts they find particularly handy maybe we could exchange ideas/code snippets in this thread? Oliver.

1 0

Center of rotation cross-hair
by Tom Goddard 28 Jul '15

28 Jul '15

Hi Oliver, I added display of a cross hair (plus sign) at the center of rotation in the graphics window. You turn it on with command set showCofR and turn it off with ~set showCofR The crosshair is white on black (and dark) backgrounds and black on white (or light) backgrounds. This will be in tonight’s daily build. Tom

2 8

"newmap" command? (Or other way to resample on arbitrary grid?)
by Oliver Clarke 28 Jul '15

28 Jul '15

Hi all, Is there any way to use vop to resample on an arbitrary grid, that is, not the grid of an existing map? This would be useful, for example, when one wants to interpolate to finer grid spacing than is present in the input map (but otherwise keeping the original dimensions and origin). I note in the old chimera documentation that there used to be a command called “newmap” (http://www.cgl.ucsf.edu/chimera/experimental/resample_map/resamplemap.html) which allowed for the generation of an arbitrary map which one could use for exactly this purpose, but this command does not seem to be recognized by modern Chimera builds. Does this command still exist somewhere under a different name? Or is there another way to accomplish this? Cheers, Oliver.

2 1

Hydrogen Bond Criteria
by jjeon＠caltech.edu 28 Jul '15

28 Jul '15

Hello, I would like to learn more about the distance/angle settings that Chimera uses for hydrogen bonds. I have read that the criteria are outlined in the paper Three-dimensional hydrogen-bond geometry and probability information from a crystal survey. I have been waiting to be granted access to the full version since I can only seem to find the abstract on other sites. Is there a website that offers access to the full paper for free? Thank you, Janice

1 0

hbonds
by leila karami 27 Jul '15

27 Jul '15

Dear chimera users I have 2 models in my system (#0 for protein and #1 for ligand). I want to use hbonds command for showing the hydrogen bonds between #0 and #1 models? (I know how to do this using FindHBond, but I want to know related command). What is the best options for hbonds command to get above state? Best, Leila

2 1

DNA ladder different color than backbone
by Belle Lin 25 Jul '15

25 Jul '15

Dear Chimera users/developers, Is there a way to make the DNA ladders a different color than the backbone? I am able to do so when the side (sugar/base) is shown in the "tube/slab" mode, but when I change it to the "ladder" mode I am unable to change the color of the rungs. I have included photos below which hopefully make my question more clear. Thank you in advance for your help!! Thanks, Belle Lin _____________________________________________________________ Able to create: [image: Inline image 3] [image: Inline image 2] Trying to create: [image: Inline image 1]

3 3

Announcing the 2015 EMDataBank Map Challenge
by Cathy Lawson 23 Jul '15

23 Jul '15

Dear Chimera User List Members, EMDataBank/Unified Data Resource for 3DEM is pleased to announce the 2015 Map Challenge. All members of the Scientific Community--at all levels of experience--are invited to participate as Challengers, and/or as Assessors. Seven benchmark raw image datasets have been selected for the challenge. Six are selected from recently described single 3D electron microscopy single particle structure determinations with image data collected as multi-frame movies; one is based on simulated (in silico) images. Challengers are sought to create single particle reconstructions from the targets, and then to upload their results with associated details. Assessors are sought to participate in evaluating submitted reconstructions. Registration is now open for all interested participants. Challengers may submit maps between August and December. Before submissions open, all are encouraged to provide feedback on submission requirements. An open assessment period will commence in early 2016. To learn more about this challenge and to register, please visit http://challenges.emdatabank.org and click on "MAP CHALLENGE" in the menu bar. The map challenge is the first of two community-wide challenges being sponsored by EMDataBank this year to critically evaluate 3DEM methods that are coming into use, with the ultimate goal of developing validation criteria associated with every 3DEM map and map-derived model. The second challenge, focused on creating coordinate models from 3DEM maps, will be announced later this year. Sincerely, Cathy Lawson on behalf of the EMDataBank Team and the Map Challenge Committee emdatabank.org www.facebook.com/emdatabank3dem

1 0

Mac-Book Pro
by Bobby Barnett 22 Jul '15

22 Jul '15

I have some students who have mac's, so I tried to download and install chimera on my Mac-Book Pro 17" . I get the following message. I downloaded chimera-1.10.1-mac64.dmg from your site. I am the only user on my computer. Any suggestions? Should I try and downloading it again? Bobby Barnett “Chimera” can’t be opened because the identity of the developer cannot be confirmed.

2 1

PB lines visualization
by Sana Saeed 22 Jul '15

22 Jul '15

is it possible to visualize periodic boundary lines (solvated box) in chimera.

2 1

On the fly map sharpening?
by Oliver Clarke 21 Jul '15

21 Jul '15

Hi, just a request for a future chimera version (probably Chimera 2 I guess) - would it be possible to integrate on the fly map sharpening into chimera, perhaps as an option for vop? It would be great to be able to play with different negative B-factors within chimera and thereby get instant feedback on map contrast and detail in different regions. Alternatively, would it be possible to call an external program that does the same thing from within chimera, perhaps bfactor from the Grigorieff lab or similar? Cheers, Oliver,

2 2

Electrostatic Potential based on Poisson-Boltzmann using APBS
by leila karami 18 Jul '15

18 Jul '15

Dear chimera users, I am using chimera 1.10.1. I did following steps to obtain Electrostatic Potential based on Poisson-Boltzmann using APBS: open... pr.pdb action... surface... show to obtain *.dx file, I typed APBS in command line, after minutes, *.dx file was created and surface color window was opened, I pressed color tab. Please see the figure in following link: https://www.dropbox.com/s/99gjecypqu910hu/apbs.png?dl=0 Why are the colors black and white in the surface, instead of blue and red? Any help will highly appreciated.

2 16

RMSD
by Valerio Chiarini 17 Jul '15

17 Jul '15

Hi everyone, I am dealing with an NMR structure and I noticed in literature that among the parameters required for presentation is included "RMSD from the ideal geometry". Does anyone know if is possible to calculate such value from chimera and how? Currently I just know how to calculate RMSD to the mean coordinate... thank you all in advance Val

2 2

question
by leila karami 16 Jul '15

16 Jul '15

Dear chimera users, 1) I want to have electrostatic surface of my protein in chimera. To this, I used *Tools... Surface/Binding Analysis... Coulombic surface coloring* A new window is opened, but apply bottom is inactive. 2) There are ray command in pymol to obtain better image of molecular structures. Is there a similar command or utility in chimera? Any help will highly appreciated. Best wishes, Leila

2 1

adjusting threshold values on volume rendering
by Dougherty, Matthew T 15 Jul '15

15 Jul '15

Hi, I can access threshold values from solid/volume rendering. eg: from VolumeViewer import active_volume v = active_volume() if v==None: return levels = getattr(v, "solid_levels") t,a=levels[0] How can I change a threshold value? Matthew Dougherty National Center for Macromolecular Imaging Baylor College of Medicine ===========================================================================

2 1

Error opening file
by Sneha Poondru 10 Jul '15

10 Jul '15

Hello! I’m trying to prepare a receptor for dock6, so I downloaded a file (1tvb_.all.sph) from our cluster onto my desktop. However, when I click to open it, I keep getting this error message from Chimera: non-standard sph header Error while processing /Users/SnehaPoondru/Desktop/Project/1tvb_.all.sph: cannot open file "/Users/SnehaPoondru/Desktop/Project/1tvb_.all.sph": syntax error, line 1832 Any help is appreciated! Thanks! ~Sneha

2 1

Structureviz Cytoscope plugin problem
by Ahmed Ezat 10 Jul '15

10 Jul '15

Dear Sir, I am trying to use structureviz Cytoscope plugin to launch Chimera, but it does not work. I installed Chimera and Cytoscope properly and set the path to Chimera in structureviz settings but it is not working. What can I do? I am using windows 7. I have also a problem to install chimera on Linux. if possible,c Can you send me detailed procedure for the installation process. Best Ahmed A Ezat

3 2

swapaa: choosing rotamers
by roz orchidea 09 Jul '15

09 Jul '15

Dear all, I would like to use swapaa and choose which rotamer I want. Foe example I want from library dynameomics the second rotamer that appears in the pop-up menu of Arg. is it possible? Thank you for your time, Alex

4 6

How to display two EM map and a PBD simultaneously
by 师扬 08 Jul '15

08 Jul '15

Dear all, Recently, I have a task to display two EM density map ('A' and 'B') and one PDB ('C') at the same time. B and C fit in map to A. So, I need to make A and B transparent to observe them simultaneously. However, one strange thing happened when I made A and B transparent. I can only see the density which A is lager than B or B is larger than A, and I could not see the buried density. In another words, when I make both A and B transparent, the map can be changed in to the 'A+B' map, and I could not see any 'A-B' or 'B-A' information. Have anyone met this problem? Do change something in setting can solve this problem? Best regards Yang

2 1

on the movie command “turn y 3 120”
by Smith Liu 07 Jul '15

07 Jul '15

Dear All, For movie command "turn y 3 120", the molecule will turn counter-clockwise. Will you lease tell me the movie command which makes the molecule turn clockwise？ Best regards. Smith

2 1

Measure translation of two domains?
by Oliver Clarke 07 Jul '15

07 Jul '15

Hi all, I’m puzzling how to measure the translation of two domains in Chimera, in a situation where there is small but non-zero translation. I expected I could do this by first using match to superimpose the two selections, then using measure rotation to obtain the rotation (if any) and translation. This has worked fine for me in measuring rotation of domains. However, on a purely translational test case, this gives confusing results. I have attached two structures of 1bl8, one of which has been displaced from the other manually by 20 Å. If I match one to the other, it successfully superimposes the two structures. If I then use measure rotation to try to recover the translation, I get a message telling me that the rotation angle is near zero (which is not surprising), but when I check the reply log, the listed translation along the axis is only 1.7Å (see screenshot attached), rather than the 20Å I expect. What am I doing wrong here? Is there another command I ought to be using? Or am I misinterpreting the output? Cheers, Oliver.

2 1

question
by A G Szabo 07 Jul '15

07 Jul '15

I am pleased to inform you that I have been using aspects of Chimera that permit me to prepare images of proteins deposited in the pdb. It was a pleasant surprise to find that the learning curve was not as steep as I thought it might be. Mind you, there are many aspects of Chimera that I have not yet attempted to use. Now I wish to do something that may not be possible to do with Chimera. And I am not sure where to look in the tutorials. I have a ribbon diagram of a protein-RNA complex, PDB 4p3e, two proteins, SRP 19 and SRP68, bound to a segment of 7SL RNA. I can also obtain the structure of another protein SRP54 which also bind to this complex. However, the structure of pdb 4p3e with SRP54 is not available. I know where SRP54 should bind to the RNA, and I know which domain of SRP54 binds to the RNA. How can I somehow combine the two files, one for SRP54 and the other 4p3e and locate SRP54 onto the 4p3e structure? (not sure it is possible) Of course crystallographers know how to achieve this structural combination. I don't have a clue. I checked the tutorial list and the closest I seemed to come was the Merge command. However, the tutorial did not seem to deal with what I wanted to do. Thank you in advance for your assistance. Arthur G. Szabo Ph.D. Professor Emeritus, Chemistry Wilfrid Laurier University Waterloo, Canada.

2 4

Question
by Damjanovic Marko 07 Jul '15

07 Jul '15

To whom it may concern, I am trying to solve a problem that is more of mathematical nature, and I would be very grateful if I could get any advice or pointers on how it may be possible to do this (in Chimera or some other program I am not aware of). I have a molecule that is more or less of cylindrical shape (quite simple shape). I would need a way to surround this molecule with a certain number of layers of solvent molecules that fit around the surface of a cylinder (preferably 1 layer and then going up gradually). The solvent molecules should be packed around the central molecule efficiently (closest packing). An alternative way to approach this would be to take a sphere made out of solvent molecules, put in the centre of the sphere the one cylindrical molecule what is of interest, and let the big sphere accommodate the new molecule. Also, for the sake of simplicity, the solvent molecules can be approximated as small spheres as well (their exact shape is not that relevant). When this is done, all I would need is to get this file in a format like cif, mol or gjf. I underline here that I am looking for a relatively crude model. Could anyone please advise me on how to do something like this? Thanks in advance and best wishes, Damjanovic Marko

3 3

chimera extensions & dialog location
by Dougherty, Matthew T 06 Jul '15

06 Jul '15

1) How can I reload an extension when chimera is running? At the present, after I modify python code I restart chimera for the s/w changes to take effect. Is there a way through idle, etc, that I can cause user code modifications to load without restarting chimera? 2) How can I position the location of IDLE using python? I have IDLE on autostart. In a user extension I have a button, when pressed it organizes the various dialogs, placing them in specific locations. When I try to do something with IDLE, running dialogs.activeDialogs() does not show IDLE in the list. Matthew Dougherty National Center for Macromolecular Imaging Baylor College of Medicine ===========================================================================

2 1

change B factor
by McCafferty, Caitlyn (NIH/NEI) [F] 06 Jul '15

06 Jul '15

Hi, Is there a feature in Chimera that allows you to change the B-factor of the Amino Acids. I have a txt file with the values that I would like to replace the current B-factors with. Thank you, Caitie

2 1

Undisplay pseudo bonds (missing segments) in pipes-and-planks representation?
by Oliver Clarke 03 Jul '15

03 Jul '15

Hi all, just wondering if there is an option I am missing to undisplay pseudobonds when using pipes-and-planks? At present chimera seems to represent missing segments in pipes-and-planks as a continuation of the chain rather than a break, which is a little confusing, e.g. check the following pair of snapshots (chain break in green section corresponds to missing 10aa loop): https://www.dropbox.com/s/cbwar1i197kt3ep/Screenshot%202015-07-03%2010.09.5… <https://www.dropbox.com/s/cbwar1i197kt3ep/Screenshot%202015-07-03%2010.09.5…> https://www.dropbox.com/s/we058qjv3ibwjmn/Screenshot%202015-07-03%2010.10.0… <https://www.dropbox.com/s/we058qjv3ibwjmn/Screenshot%202015-07-03%2010.10.0…> Also in general it would be nice if cylindrical representations of helices were more integrated into chimera, perhaps with their own style adjustments (e.g. allowing for curved cylinders), as for large structures they provide much less visual clutter, but I guess that is probably something for Chimera 2. Cheers, Oliver.

2 2

Cross eyed stereo pair generated by default
by Oliver Clarke 02 Jul '15

02 Jul '15

Hi all, I’ve noticed that when I save a stereo pair (using File/Save Image/Image Type/stereo pair), the resultant stereo pair is suitable for cross-eyed viewing. This is great for me, as I can’t do wall eyed stereo, but the default for many journals is to provide a wall-eyed stereo pair. Of course it is easy enough to convert by swapping the two halves of the pair, but for the sake of convenience, would it be possible to list stereo pair (cross eye) and stereo pair (wall eye) as two separate options in this dialogue? Cheers, Oliver.

3 8

Re: [Chimera-users] Chimera-users Digest, Vol 147, Issue 4
by Oliver Clarke 02 Jul '15

02 Jul '15

Thanks Greg! To clarify, I wasn't actually intending these for use with a viewer of any sort - just to provide in a paper for use as a stereo pair, viewed by either diverging or crossing one's eyes to superimpose the two halves of the pair. Some people can easily view wall-eyed pairs, while others (myself included) can only view cross-eyed pairs, so it would be nice to have the option of generating either. Cheers, Oliver. On Thu, Jul 2, 2015 at 3:00 PM, <chimera-users-request(a)cgl.ucsf.edu> wrote: > Send Chimera-users mailing list submissions to > chimera-users(a)cgl.ucsf.edu > > To subscribe or unsubscribe via the World Wide Web, visit > http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > or, via email, send a message with subject or body 'help' to > chimera-users-request(a)cgl.ucsf.edu > > You can reach the person managing the list at > chimera-users-owner(a)cgl.ucsf.edu > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Chimera-users digest..." > > > Today's Topics: > > 1. Re: on beta strand assignmet by chimera (Elaine Meng) > 2. Cross eyed stereo pair generated by default (Oliver Clarke) > 3. Re: Cross eyed stereo pair generated by default (Greg Couch) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 2 Jul 2015 09:55:55 -0700 > From: Elaine Meng <meng(a)cgl.ucsf.edu> > To: Smith Liu <smith_liu123(a)163.com> > Cc: chimera-users(a)cgl.ucsf.edu > Subject: Re: [Chimera-users] on beta strand assignmet by chimera > Message-ID: <E1E1B5D3-B0A5-4849-88D2-237944AFFA48(a)cgl.ucsf.edu> > Content-Type: text/plain; charset=utf-8 > > Dear Smith, > If the PDB files came from the Protein Data Bank repository, generally the > proteins already have secondary structure assigned in HELIX and SHEET > records. If so, Chimera just uses those assignments. > < > http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/tutorials/pdbintro.html#se… > > > > If the PDB file of a peptide/protein doesn?t have HELIX and SHEET records > in it, then it runs a method ?ksdssp? described here: > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/ksdssp.html> > > If you don?t like the results for some reason, you could try re-running > the ?ksdssp? command (or the ?compute SS? function in the Model Panel) with > different (nondefault) parameters, or just manually assign residues as > helix or strand however you like with the ?setattr? command, as shown in > the lower part of this previous post: > < > http://plato.cgl.ucsf.edu/pipermail/chimera-users/2014-January/009574.html > > > > I hope this helps, > Elaine > ---------- > Elaine C. Meng, Ph.D. > UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab > Department of Pharmaceutical Chemistry > University of California, San Francisco > > > On Jul 2, 2015, at 6:09 AM, Smith Liu <smith_liu123(a)163.com> wrote: > > > > Dear All, > > > > I have a protein, which contains fragment aa 239-251. The protein has > been fitted its map with 2 different (minor difference) resolution, and > thus I have 2 PDB. For PDB 1 (the first resolution), the H-bonds inside aa > 239-251 include: > > #2 Gly 245.A N-Asn 242.A O 2.708A > > #2 Asn 242.A N-Tyr 246.A O 3.120 A > > #2 Val 248.A N-Val 240.A O 3.120 A > > #2 GLN 251.A N-Ser 238.A 0 3.033 A > > > > For PDB 2 (the second resolution), the H-bonds inside aa 239-251 include: > > #0 Gly 245.A N-Asn 242.A O 2.715A > > #0 Asn 242.A N-Tyr 246.A O 3.1206 A > > #o Val 248.A N-Val 240.A O 2.858 A > > #0 GLN 251.A N-Ser 238.A 0 3.074 A > > > > Naked eye check found the H-bonds in PDB 1 were almost the same H-bonds > in PDB 2. > > > > However for PDB 2, aa23-242 and aa 247-251 form 2 strands, but for PDB > 1, it was a un-disconnected loop for aa 239-251. > > > > Will you please explain how chimer assign beta strand? > > > > Best regards. > > > > Smith > > > > > > ------------------------------ > > Message: 2 > Date: Thu, 2 Jul 2015 14:20:01 -0400 > From: Oliver Clarke <olibclarke(a)gmail.com> > To: Mailing List <chimera-users(a)cgl.ucsf.edu> > Subject: [Chimera-users] Cross eyed stereo pair generated by default > Message-ID: <B5D941AF-2692-4E71-8D5A-2A9C8D1610E2(a)gmail.com> > Content-Type: text/plain; charset=utf-8 > > Hi all, > > I?ve noticed that when I save a stereo pair (using File/Save Image/Image > Type/stereo pair), the resultant stereo pair is suitable for cross-eyed > viewing. > > This is great for me, as I can?t do wall eyed stereo, but the default for > many journals is to provide a wall-eyed stereo pair. > > Of course it is easy enough to convert by swapping the two halves of the > pair, but for the sake of convenience, would it be possible to list stereo > pair (cross eye) and stereo pair (wall eye) as two separate options in this > dialogue? > > Cheers, > Oliver. > > > ------------------------------ > > Message: 3 > Date: Thu, 02 Jul 2015 11:39:26 -0700 > From: Greg Couch <gregc(a)cgl.ucsf.edu> > To: chimera-users(a)cgl.ucsf.edu > Subject: Re: [Chimera-users] Cross eyed stereo pair generated by > default > Message-ID: <5595855E.4020903(a)cgl.ucsf.edu> > Content-Type: text/plain; charset=utf-8; format=flowed > > I'll look into it. > > FYI, cross-eyed stereo is the standard for stereo PNG and stereo JPEG > files. There is a buglet in stereo image saving -- the .png files > should be renamed to have a .pns suffix, and the stereo JPEG images > should have a .jps suffix. However there aren't many viewers other than > the one that comes with NVIDIA's 3D Vision setup. > > -- Greg > > On 07/02/2015 11:20 AM, Oliver Clarke wrote: > > Hi all, > > > > I?ve noticed that when I save a stereo pair (using File/Save Image/Image > Type/stereo pair), the resultant stereo pair is suitable for cross-eyed > viewing. > > > > This is great for me, as I can?t do wall eyed stereo, but the default > for many journals is to provide a wall-eyed stereo pair. > > > > Of course it is easy enough to convert by swapping the two halves of the > pair, but for the sake of convenience, would it be possible to list stereo > pair (cross eye) and stereo pair (wall eye) as two separate options in this > dialogue? > > > > Cheers, > > Oliver. > > _______________________________________________ > > Chimera-users mailing list > > Chimera-users(a)cgl.ucsf.edu > > http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > > > > > > ------------------------------ > > _______________________________________________ > Chimera-users mailing list > Chimera-users(a)cgl.ucsf.edu > http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > > > End of Chimera-users Digest, Vol 147, Issue 4 > ********************************************* >

1 0

on beta strand assignmet by chimera
by Smith Liu 02 Jul '15

02 Jul '15

Dear All, I have a protein, which contains fragment aa 239-251. The protein has been fitted its map with 2 different (minor difference) resolution, and thus I have 2 PDB. For PDB 1 (the first resolution), the H-bonds inside aa 239-251 include: #2 Gly 245.A N-Asn 242.A O 2.708A #2 Asn 242.A N-Tyr 246.A O 3.120 A #2 Val 248.A N-Val 240.A O 3.120 A #2 GLN 251.A N-Ser 238.A 0 3.033 A For PDB 2 (the second resolution), the H-bonds inside aa 239-251 include: #0 Gly 245.A N-Asn 242.A O 2.715A #0 Asn 242.A N-Tyr 246.A O 3.1206 A #o Val 248.A N-Val 240.A O 2.858 A #0 GLN 251.A N-Ser 238.A 0 3.074 A Naked eye check found the H-bonds in PDB 1 were almost the same H-bonds in PDB 2. However for PDB 2, aa23-242 and aa 247-251 form 2 strands, but for PDB 1, it was a un-disconnected loop for aa 239-251. Will you please explain how chimer assign beta strand? Best regards. Smith

2 1

gzip error while starting REST server on Windows
by Mungo Carstairs (Staff) 02 Jul '15

02 Jul '15

I'm testing Jalview starting Chimera (1.10.1) with RESTServer on a Windows 7 machine without gzip installed. On starting the Chimera process: new ProcessBuilder().start("chimera.exe", "--start", "RESTServer") I get two lines of response: Cannot execute 'gzip': no automatic decompression of .Z files REST server on host 127.0.0.1 port nnnnn which is ok - I can get the REST port number I need and carry on. Am I safe to ignore the other message? I can't see what file (I assume part of the Chimera installation) it is arising from. Thanks, Mungo Mungo Carstairs Jalview Computational Scientist The Barton Group Division of Computational Biology College of Life Sciences University of Dundee, Dundee, Scotland, UK. www.jalview.org<http://www.jalview.org/> www.compbio.dundee.ac.uk<http://www.compbio.dundee.ac.uk/> The University of Dundee is a registered Scottish Charity, No: SC015096

2 1

Worm representation / command line
by Xavier ROBERT 01 Jul '15

01 Jul '15

Dear all, I am wondering if there is a way to call "Render by Attribute" at the command line in order to render a worm representation? If not, is this feature planned for the near future and is there any workaround for this? Thank you very much in advance. Kind regards, Xavier R.

2 1

generating symmetry mates of a surface model created with shape command
by Carmen San Martin 01 Jul '15

01 Jul '15

Dear all, is it possible to generate symmetry-related copies of a surface model created by the shape command? I am interested in masking out certain map regions related by symmetry. I got the right shape at the right place but now cannot figure out how to create the shape symmetry mates. The sym command followed by the model number of my shape complaints that no molecules are specified. Thanks, Carmen ------------------------------------------------------------- Carmen San Martín, Ph. D. Centro Nacional de Biotecnología (CNB-CSIC) Darwin, 3 28049-Madrid (SPAIN) Email: carmen(a)cnb.csic.es Phone: 34-91-5855450 Fax: 34-91-5854506 http://www.cnb.csic.es/ http://tinyurl.com/carmensanmartinlab http://orcid.org/0000-0001-9799-175X ------------------------------------------------------------

2 3

Using Chimera to read Maestro files
by CG Deer 30 Jun '15

30 Jun '15

Hello Chimera Developers and Users, My name is Christopher Deer, and I am trying to use Chimera as part of a workflow for getting a maestro file (.mae) ready for presentation in a CAVE environment. The .mae file contains color references and specifics defined by a researcher. However, these details are not appearing when I open the file in Chimera. So is there any way to open this file type without having to redefine all the specific features the researcher originally made? Here is a screenshot of what I am seeing in Chimera, and I have attached what the researcher originally wanted it to look like (minus white background).[image: Inline image 1] Thank you for your help, --Chris Deer University of Arizona Research Computing, Data Visualization Specialist

2 1

animation error
by Hartzell Jr., Criss 30 Jun '15

30 Jun '15

I am at a meeting making an animation for a talk using my MacAir. When I play it back from the animation panel, about half way through the animation, I receive this error and the animation crashes. Can you help debug? Thanks. File "/Volumes/ChimeraInstaller 1/Chimera.app/Contents/Resources/share/Animate/SceneState.py", line 1031, in _msmsSameColors return false NameError: global name 'false' is not defined Criss Hartzell Professor Department of Cell Biology Emory University School of Medicine Atlanta, GA 30322 404-242-5719 (cell) For Fedex, UPS, other courier: Criss Hartzell 615 Michael St. 535 Whitehead Building Emory University Atlanta, GA 30322 ________________________________ This e-mail message (including any attachments) is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message (including any attachments) is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail message and destroy all copies of the original message (including attachments).

3 2

morph volumes after alignment
by Haselbach, David 30 Jun '15

30 Jun '15

Dear all, I have a few volumetric cryo EM Maps of the same protein in different conformations. And I would like to morph between those conformations. However, the volumes are not perfectly aligned in first place. So I align all of them on one of the maps using the "fit in map" functionality. This works great and when I look through the different structures with the volume viewer, they are perfectly aligned. However, if I morph through the maps using the following command: vop morph #0-19 playstep 0.003 constantVolume true frames 1000 the maps are morphed in their original position so the morph is quite jumpy. Is there a way to morph through them in the aligned coordinate system directly? Kind regards David ----------------------------------------------------------------------------------- Dr. David Haselbach Max-Planck-Institut für biophysikalische Chemie AG Stark Am Fassberg 11 D-37077 Goettingen dhaselb(a)gwdg.de<mailto:dhaselb@gwdg.de> +49-551-2011302

2 1

Linux and stereo in the vizvault
by Greg Couch 29 Jun '15

29 Jun '15

So it works with some caveats -- iff the projector is the primary and only display and you use reverse sequential stereo. Getting there was difficult, you have to disable the LCD monitor with the system display settings instead of the amdcccle interface that appears to do the same thing. But you need to use the amdcccle interface to turn on quad-buffered stereo. Once quad-buffered stereo is setup (after several reboots), you can turn on and off the LCD monitor, but the stereo-sync signal is only generated only if the LCD monitor is turned off. The driver also got confused occasionally and wouldn't display a stereo image -- that was fixed by reenabling the LCD monitor and disabling it again. -- Greg

1 1

on chimera saved PDB file
by Smith Liu 29 Jun '15

29 Jun '15

Dear All, By chimera I have saved a PDB file, but at the end of the saved PDB there are following sentences which I do not understand: CONECT 3 2 4 17 CONECT14560145591456114574 CONECT29117291162911829131 Will you please explain it to me the meaning of "CONECT 3 2 4 17" and the other 2 sentences? And why there is no space in "CONECT14560145591456114574"? Smith

2 1

Morph volumes after alignment
by Haselbach, David 28 Jun '15

28 Jun '15

Dear all, I have a few volumetric cryo EM Maps of the same protein in different conformations. And I would like to morph between those conformations. However, the volumes are not perfectly aligned in first place. So I align all of them on one of the maps using the "fit in map" functionality. This works great and when I look through the different structures with the volume viewer, they are perfectly aligned. However, if I morph through the maps using the following command: vop morph #0-19 playstep 0.003 constantVolume true frames 1000 the maps are morphed in their original position so the morph is quite jumpy. Is there a way to morph through them in the aligned coordinate system directly? Kind regards David ----------------------------------------------------------------------------------- Dr. David Haselbach Max-Planck-Institut für biophysikalische Chemie AG Stark Am Fassberg 11 D-37077 Goettingen dhaselb(a)gwdg.de<mailto:dhaselb@gwdg.de> +49-551-2011302

1 0

ViewDock
by leila karami 27 Jun '15

27 Jun '15

Dear all Now, I want to save 1 pdb file containing target + one of poses of ligand for example, number 3. For this aim, what to do? I did following steps, but I did not succeed: file ---> save pdb ... In save models section, I selected both of target.pdb (#0) and (#1.3) In file name section, I wrote complex.pdb and then save. I encountered with error (see the below link): https://www.dropbox.com/s/bdkq1x1db96amhi/chimera%20error.png?dl=0 I tested other names such as $target.pdb and $1.3.pdb. Unfortunately, I encountered with the same error. Best regards,

2 1

drawing shapes
by Bala subramanian 25 Jun '15

25 Jun '15

Friends, I have used HOLE program ( http://www.sciencedirect.com/science/article/pii/S026378559700009X) to find the pore radius of a channel as a function of z-axis. As output, the program gives the location of capsules (that were filled inside the channel), capsule length and radius etc, as a function of z-axis. Capsule graph option***** Data: cenxyz.cvec eff.rad area CAP.LEN cap.rad angle.X-axi cen.line.di integ.s/(ar point sourc *-14.00000* *2.23465* 15.68804 *1.72142* 1.39301 73.21487 0.00000 0.03187 (sampled) -14.50000 2.40709 18.20262 1.96609 1.46141 58.41143 -0.54015 0.05934 (sampled) -15.00000 2.51292 19.83844 1.37866 1.78410 73.19154 -1.11224 0.08454 (sampled) -15.50000 2.69525 22.82171 1.34834 1.97026 87.40431 -1.71545 0.10645 (sampled) I was wondering if i can use the shape command to draw the capsules in Chimera. I thought to create 'tube' with 'shape' command but i was not lucky. For instance, the following command didnt work (i opened channel as model #0) shape tube #0 radius *2.23* bandLength *1.72* center 0, 0, *-14.00 * Pls help to know some way to do this. Thanks, Bala -- C. Balasubramanian

2 2

Windows 8.1 and nVidia Quadro drivers.. grrr
by Kenward Vaughan 24 Jun '15

24 Jun '15

Hello! I have Chimera working wonderfully with sequential stereo under Linux with our Quadro card (a K4200), but am getting terribly frustrated with trying to have it work at all under Win 8.1. The latest non-beta driver is installed. It took me a while to find where the nVidia control panel is located after finding that Chimera didn't recognize any stereo-capable hardware (including some references to togl and pixels). Blah. I started up the "wizard" of 3D, which gave me a nice slide show, but Chimera didn't see anything. Interestingly, rebooting directly into Linux gave the same problem, which had me fuming and frothing all over the place. A shutdown followed by fresh start into Linux reset the card. So the Windows driver touches something inside the card which has to be reset hard. There are multiple things installed when this driver is put on the system. Is it possible that there are things I don't want, which are slyly strengthening my thoughts about Windoze? Some searching of the archives was inconclusive for this system. I have played with the settings in the control panel but have found no combination that gets sequential stereo working. Does anyone know what settings should be changed from the defaults to get this working? Many thanks for any help! Kenward -- In a completely rational society, the best of us would aspire to be _teachers_ and the rest of us would have to settle for something less, because passing civilization along from one generation to the next ought to be the highest honor and the highest responsibility anyone could have. - Lee Iacocca

2 5

savepos
by Dougherty, Matthew T 24 Jun '15

24 Jun '15

in defining the text string view_name, spaces are disallowed, eg "rotate 30". Although the position will be created, the reset command will not properly access the position key. What are the allowable characters? Matthew Dougherty National Center for Macromolecular Imaging Baylor College of Medicine ===========================================================================

3 3

ViewDock
by leila karami 24 Jun '15

24 Jun '15

Dear Elaine, Thanks for your guidance. It was very good. Now, I want to know there is this possibility to have these separate 252 pdb files as 1 pdb file? Thanks for your time and consideration. Best

3 2

How to crop a map
by Tom Goddard 24 Jun '15

24 Jun '15

You can crop a map using volume dialog menu Features / Region Bounds, then save it with volume dialog File / Save Map As…. Other Chimera map capabilities are described in the Guide to Volume Data Display in Chimera: http://www.cgl.ucsf.edu/chimera/data/tutorials/volumetour/volumetour.html <http://www.cgl.ucsf.edu/chimera/data/tutorials/volumetour/volumetour.html> Tom > On Jun 23, 2015, at 7:52 PM, 李智海 wrote: > > Adding to the previous one. > the map I want to convert has a same pixel size with the data set. So maybe the question could be that how can I cutting the boundaries of the map to fit the size of reconstruction images. > > Thanks! > > Zhihai Li > > >> On Jun 24, 2015, at 10:44 AM, 李智海 wrote: >> >> Hi, Tom >> An another question, >> I want to make a reference map for reconstruction, here I have a map but with different map size from my raw image, how can I scale the map dimensions into a specific value without changing the centre coordinates. >> Thanks! >> >> Zhihai Li >> >> >>> On Jun 24, 2015, at 2:00 AM, Tom Goddard wrote: >>> >>> If you used the Chimera Segment Map dialog (volume dialog menu Tools / Segment Map) then you select a segment (ctrl click on it) and use Segment Map menu entry Regions / Mean and SD. If you segmented the map by some other means and have the pieces as separate maps use volume dialog menu Tools / Measure Mean, SD, RMS. >>> >>> Tom >>> >>> >>>> On Jun 23, 2015, at 6:42 AM, 李智海 wrote: >>>> >>>> Hi, >>>> Here I want to evaluate the flexibility of variable domains of a density map. How can I quantify the mean intensity of segmented parts by Chimera? Thanks! >>>> >>>> Best wishes! >>>> >>>> Zhihai Li >>>> >>>> Ph.D student in State Key Laboratory of Molecular Vaccinology and Molecular Diagnostics. >>>> School of Life Sciences, Xiamen University. >>>> Xiang'an Road(South), Xiang'an District, Xiamen City, >>>> Fujian Province, China. >>>> >>>> _______________________________________________ >>>> Chimera-users mailing list >>>> Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> >>>> http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users <http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users> >>> >> >

1 0

PDB not opening
by YAikhombA Mutum 24 Jun '15

24 Jun '15

Hi 1. I'm not able to fetch pdb's from Chimera by the command 'open 121p'. It just says 'opened 121p' in the reply log while it display a blank black screen. There are no active models displayed too (in the active models panel, there are no active tabs for models (0,1,2...)) despite the status in the reply log. The internet connections are ok (my browser is working fine). On checking the preferences (Favorites ---> preferences), everything seems fine (for instance in Category: Fetch (save fetched flie: True and use local files:True/False (I've tried both cases))). Even the category of web access seems ok. A day before I'd been able to fetch pdb's by just the command (open 1zik (say)). Now, the only way to retrieve it is to go to the rcsb website, download the pdb from a browser and then run it in chimera. Moreover, even if it (the pdb file) is already downloaded it doesn't run by entering the command (again the preferences are fine). How can I sort out this? 2. Is there a way to color the capped surface (the flat surface when you cut a protein virtually) based on sequence conservation color range. I tried the same way B factor surface capping is done as in the tutorials but the one for conservation doesn't work. It instead colors the 'whole' surface something else (Automatically uses default 'color by heteroatom' (red, tan and blue) not the colors I used for the sequence conservation). The same when I try to cap a surface based on hydrophobicity. Thanks in advance! Yaikhomba

3 2

Issue with cytoscape plugin
by Juan Eiros Zamora 23 Jun '15

23 Jun '15

Hi Chimera users, I'm using cytoscape and structureviz to visualize interaction networks of my MD simulations. I've been using it for quite awhile now on the normal structure of my protein. Now I am simulating it with two adjacent phosphorylated serines (all is done with AMBER), and I think there are some issues with this because: 1) If I select a region of the protein that does not contain this "special" aminoacids, the RIN visualization works just fine 2) When I select the region that contains these two phosphorylated Serines (about +-10 aminoacids from them), when the RIN is set up on cytoscape I get the following error: RINLayout Fetching coordinates from Chimera... null Which is pretty generic. What is more confusing is that if I select all the system (which is not interesting for me, but I've done it anyway to try) it seems to work as well. My cytoscape version is 3.2.0 and all the apps in it are up to date: structureViz2 1.0.1 RINalyzer 2.0.0 I think the RIN is being calculated just fine, but it's having problems recognising the 3D shape in Chimera. Also, it fails to synchronize the colours, I don't know if this is related to what I'm reporting here, but I suspect it is. Does anyone know how can I proceed? It would be very useful for me to compare the RINS of the non-phosphorylated version of my system to the phosphorylated version. Thanks for any help, Juan Eiros

2 1

ViewDock
by leila karami 23 Jun '15

23 Jun '15

Dear chimera users I have docking outputs from Swissdock (there is 252 binding modes for my ligand relative to the target protein). I used following to view my outputs: 1) File > Open , then load target.pdb 2) Tools > Surface/Binding Analysis > ViewDock, choose clusters.dock4.pdb (Dock 4, 5 or 6 format) Now, I want to have several pdb files in which there is target protein and each of binding modes, that is 252 pdb files. How to do this? Any help will highly appreciated.

2 1

measure a mean intensity of a segmented map
by 李智海 23 Jun '15

23 Jun '15

Hi, Here I want to evaluate the flexibility of variable domains of a density map. How can I quantify the mean intensity of segmented parts by Chimera? Thanks! Best wishes! Zhihai Li Ph.D student in State Key Laboratory of Molecular Vaccinology and Molecular Diagnostics. School of Life Sciences, Xiamen University. Xiang'an Road(South), Xiang'an District, Xiamen City, Fujian Province, China.

2 1

Attribute Error: 'AtomType' object has no attribute 'amber_atom_type'
by Karl Sebby 22 Jun '15

22 Jun '15

Hi I am modifying several ligand/protein complexes; usually with the “Build Structures” tool. I modify ligands by changing and deleting atoms, or by using “Join Models” after building or importing a structure with “Start structure”. Sometimes, minimizing the ligand works fine, but other times I get the error: “Attribute Error: ‘AtomType’ object has no attribute ‘amber_atom_type’”. I cannot figure out what is causing this error or how to fix it. It seems to happen when I begin working from a saved session or a pdb that was written with the ‘write’ command and not when I go through a whole series of steps in one shot. Any ideas on what is going on? Thanks, All the best, Karl -- Dr Karl Sebby Left Side Research LLC 1661 K M Ranch Road Whitefish Montana 59937 Office: 406 623 4773

2 2

Using the findHbond via Python Midas Module
by Ahir Pushpanath 22 Jun '15

22 Jun '15

Dear All, I am confused about what input I need to provide to the findHbond command in the FindHBond midas module. This is the help() on the command. findHBonds(models, intermodel=True, intramodel=True, donors=None, acceptors=None, distSlop=0.0, angleSlop=0.0, interSubmodel=False, cacheDA=False). For example if I want to find all H bonds between a pre-selected group of residues in loop, saved as: loop = chimera.selection.currentAtoms() and the rest of the protein molecule, what command would I have to run? I am assuming the output(such as the one given in the findHbonds runcommand) would be saved into a variable if I provide one? Ahir -- Dr. Ahir Pushpanath* PhD.* Senior Biologist, Johnson Matthey.

2 1

help please
by Sezer Akgöl 22 Jun '15

22 Jun '15

how can I associate 2 protein with each other from their C and N terminals respectively

2 1

Feature request - lock center of rotation to center of view ("pseudo-Coot mode")
by Oliver Clarke 22 Jun '15

22 Jun '15

Hi, I have a request for a future version of Chimera - would it be possible to add a command or menu item that (reversibly) locks the center of rotation to the center of view, such that when the view is translated, the cofr is updated automatically also? This is the way structure navigation works in Coot, and I find it is a much more intuitive and precise way to travel when examining the finer details of a structure (as one would expect given that the main purpose of Coot is model building while Chimera is exceptionally good for structural analysis and visualization). This would make navigation of large structures much easier, particularly when one is just browsing around the structure. In addition, it would be nice to have a dynamically updated pseudoatom to indicate the current center of rotation - this is implemented in Coot as the “pink pointer”, and I find it very helpful for getting my bearings. Cheers, Oliver.

2 1

Chimera in Virtual machine
by Milo Westler 18 Jun '15

18 Jun '15

Well I thought I had this figured out, but then my VM broke and I can't get chimera to run in my VM again. I am running Vritualbox with a guest system of ubuntu-mate 15.04. I want to be able to use chimera in the VM for a workshop that we are presenting. I have installed the 64 bit version for linux. I get: ~> chimera pci id for fd 4: 80ee:beef, driver (null) libGL error: core dri or dri2 extension not found libGL error: failed to load driver: vboxvideo libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 3 (X_GLXCreateContext) Value in failed request: 0x0 Serial number of failed request: 751 Current serial number in output stream: 752 ~> And when I run: /opt/UCSF/Chimera64-1.10.1/share> python __main__.py Chimera is misconfigured. Please reinstall chimera. Thanks, -- -- Milo =================================================== National Magnetic Resonance Facility at Madison An NIH-Supported Resource Center W. Milo Westler, Ph.D. NMRFAM Director Senior Scientist and Adjunct Professor Department of Biochemistry University of Wisconsin-Madison DeLuca Biochemistry Laboratories 433 Babcock Drive Rm B160D Madison, WI USA 53706-1544 EMAIL: milo(a)nmrfam.wisc.edu PHONE: (608)-263-9599 FAX: (608)-263-1722 ======================================================================= ========

2 1

Query on GPI-anchor proteins
by Aditya Padhi 17 Jun '15

17 Jun '15

Dear Chimera Users, I am working on a protein, which is known to cleave few GPI-anchor proteins (Glycosylphosphatidylinisotol). Also, I know that there are several other candidate GPI-anchor proteins which may or may not be cleaved by my protein of interest. I was wondering, if there is any tool/method in Chimera using which I can atleast get some preliminary information on which of the proteins that could be probably cleaved by my protein of interest. The 3D structure of my protein of interest and most of the GPI-anchor proteins is not available. I was therefore wondering if there is any such tools/methods available that I am missing using which I can find out which of the GPI-anchor proteins are being cleaved. Any suggestion/guidance would be highly appreciated. Thank you so much, Aditya

2 1

What happened to my model?
by Sara Cuellar 17 Jun '15

17 Jun '15

So, in my line of work we are focusing on the protein Dihydrofolate Reductase. Using Jmol, I was able to remove all chains except for chain A, and also increased the diameter of the backbone so that it may be printed. When I opened it in Chimera to export it from VRML file to an STL file, it still looked fine. However, when it was opened in my 3d printing program, parts of the protein were missing. All I see is floating fragments. Is there any way I can fix this using chimera? I have included images of the protein.

2 2

Scripted registration of a perframe python script
by Kersey Black 17 Jun '15

17 Jun '15

Hi, I have been 'opening' a python script file from within Chimera to start a session and in that script I open the MovieDialog manager (mdm) and read in a pdb with a series of models to be viewed as a trajectory. That part is working thanks to help from other responses in chimera-users. To modify the molecule (color, etc) it seems like the mdm.ensemble.molecule is giving me the access, though that may not be the right approach for my needs, because it seems to act on all frames. What I would like to do, from within this same initial python script, is to apply/register a perframe (also in python) script to control things like color on a frame by frame basis. I would like to do this as a way of keeping all of the setup in a single script file such that then I just need to record the movie manually, or perhaps there is a way to do this also from the script. Thanks much for any help and/or direction to documentation on the python api to the MovieDialog that allows control of these functions. Kersey

3 2

ImportError: no module named chimera
by 陈雷 16 Jun '15

16 Jun '15

Hello, I got a problem when calling chimera in a python script. ImportError: no module named chimera Here is the line in my script: from chimera import runCommand. Python version is 2.6.6 and chimera is 1.8 in Linux. Would you please help me out with this? Thanks. Best regards, Ryan

2 1

ImportError: no module named chimera
by ryanch＠mail.ecust.edu.cn 15 Jun '15

15 Jun '15

Hello, I got a problem when calling chimera in a python script. ImportError: no module named chimera Here is the line in my script: from chimera import runCommand. Python version is 2.6.6 and chimera is 1.8 in Linux. Would you please help me out with this? Thanks. Best regards, Ryan

1 0

restoring sessions with python & triggers
by Dougherty, Matthew T 15 Jun '15

15 Jun '15

Normally a save session by a python extension is invoked by a trigger SAVE_SESSION. For restoring a session, several related chimera APIs are available that are typically not used. 1) post model restore: SimpleSession.registerAfterModelsCB(afterModelsRestoredCB, arg) 2) BEGIN_RESTORE_SESSION and END_RESTORE_SESSION triggers. I need to reset extension gui values based on midas positions. I presume a normal restore in the session file does not guarantee that these midas positions will be loaded at that time, so I need to delay the gui updates until the restore process has ended or possibly when the models are loaded loaded. What is the distinction between END_RESTORE_SESSION and registerAfterModelsCB? Matthew Dougherty National Center for Macromolecular Imaging Baylor College of Medicine ===========================================================================

2 1

setting viewing pref using python
by Dougherty, Matthew T 15 Jun '15

15 Jun '15

the viewing dialog sets the Camera:Stereo parameters:units to inches, and Side View:Side to right. using python how can I reset them to mm & top? Matthew Dougherty National Center for Macromolecular Imaging Baylor College of Medicine ===========================================================================

2 1