- Chimera-users - RBVI Mailing Lists

radial density map
by Jian Guan 09 Feb '15

09 Feb '15

Hi all, I have a mrc map of virus, T=7 icosahedron. Does anyone know how to make radial density map (averaged radial density VS radius of virion)? I tried chimera method of shortcut rd. It took long time but return one result. For the rd result, is it make along x, y or z axis? Or along assigned axis, like 5 fold symmetric axis? I have asymmetric extra density around 5-fold axis. What will happen in my case if use rd? Are there any other ways to make the plot besides of rd? Thank you so much. Sincerely yours, Jian

2 1

CHIMERA movie with parm7/dcd
by Francesco Pietra 09 Feb '15

09 Feb '15

Hello: In the recent past, issues in running movie with parm7 files were solved. Now, with ambertools14 problems come out again, unless I dropped into a silly mistake. That is, parm7/dcd was refused because no top file was found. Renaming the prm7 extension prmtop led to File "/opt/UCSF/Chimera64-1.7/share/Trajectory/formats/Amber/Amber.py", line 354, in SetupFrame raise IOError, "Trajectory/Restart header line is greater than 80 characters -- invalid!!" Thanks for your kind attention francesco pietra

2 1

command line
by Dieter Blaas 09 Feb '15

09 Feb '15

Hi, sorry for asking again an old question but I lost the solution: how do I show single solid planes of several volumes? I tried: 'vol all style solid plane one axis z' and many combinations thereof but it always tells me: 'volume invalid planes argument "one": Value must be one of x,y,z, got "one" when I try ' vol all style solid plane z' it tells me: 'volume invalid planes argument "z"' and so on.... Thanks a lot for your patience, best, Dieter ------------------------------------------------------------------------ Dieter Blaas, Max F. Perutz Laboratories Medical University of Vienna, Inst. Med. Biochem., Vienna Biocenter (VBC), Dr. Bohr Gasse 9/3, A-1030 Vienna, Austria, Tel: 0043 1 4277 61630, Fax: 0043 1 4277 9616, e-mail: dieter.blaas(a)meduniwien.ac.at ------------------------------------------------------------------------

2 2

Re: [Chimera-users] Ramachandran plot statistics
by Nadia Raboana 08 Feb '15

08 Feb '15

Hi, It works perfectly, thank you for helping me. Best regards, Nadia Sent from Windows Mail From: Elaine Meng Sent: ‎February‎ ‎8‎, ‎2015 ‎12‎:‎52‎ ‎AM To: Nadia Raboana CC: chimera-users(a)cgl.ucsf.edu Subject: Re: [Chimera-users] Ramachandran plot statistics Hi Nadia, You would have to decide for yourself what probability cutoff you want to use as the boundary between allowed and disallowed. First assign the probabilities to the residues: in the Ramachandran Plot dialog, click the button at the bottom to “Assign Residue Probabilities” (or use the ramachandran command option “assign”): <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/ramachandran/rama…> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/ramachandran.html> Then in Select by Attribute (Chimera menu: Select… By Attribute Value) choose attributes of “residues” with Attribute: ramaProb … that will show a histogram of the probability values. Then you can move the green bars to enclose the range of probabilities you want to select. After you use that dialog to select everything above your cutoff probability, then you can get a count of the selected residues by clicking the green magnifying glass at the bottom right corner of the Chimera window to show the Selection Inspector. <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/render/render.htm…> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/inspection.html> Then you would divide by the total number of amino acid residues to get the percentage. You could count the total number of amino acid residues, for example, by using command “select protein” and then clicking the green magnifying glass. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Feb 7, 2015, at 4:49 AM, Nadia Raboana <nadia_raboana(a)hotmail.fr> wrote: > Hello, > I am using UCSF Chimera to generate Ramachandran plot related to my protein structure. I would like to know how to get the statistics about the analysis. I would precisely know the percentage values of residues in most favored regions, allowed regions and disallowed regions. > Thank you for answering me. > Best regards, > Nadia Raboanatahiry

1 0

Change selection mode programatically
by Mario J. Borgnia 07 Feb '15

07 Feb '15

Hi, I am trying to find a way to split a complex selection pattern among a number of lines in a script. I was expecting that this would be an option to the select command, but apparently it is not. I know that I can combine "select" commands by changing the selection mode to "append" in the GUI, but I am struggling to find the way of doing this from command line or from a script. Is there a way to change the selection mode to "append" without using the GUI? Thanks Mario -- +---------------------------------+ | Mario J. Borgnia, Ph. D. | | | | Lab of Cell Biology | | NIH NCI/CCR | | 50 South Drive Rm 4306 MSC 8008 | | Bethesda MD 20892-8008 | | | | Tel: (301) 594 0563 | | mborgnia(a)nih.gov | +---------------------------------+

2 2

Ramachandran plot statistics
by Nadia Raboana 07 Feb '15

07 Feb '15

Hello,I am using UCSF Chimera to generate Ramachandran plot related to my protein structure. I would like to know how to get the statistics about the analysis. I would precisely know the percentage values of residues in most favored regions, allowed regions and disallowed regions.Thank you for answering me.Best regards, Nadia RaboanatahirySchool of Life Science and TechnologyHuazhong University of Science and TechnologyWuhan, CHINA

2 1

Help in writing python code
by Ankit Agrawal 06 Feb '15

06 Feb '15

Hi I am doing trajectory analysis which has 40000 frames. So for all frames I wanted to calculate the all three inertia axes. That I did. But problem is that when I run the python code it starts making all the three axes for each frames that becomes messy. So I want a little change in my code so that during trajectory analysis it should create axes but should delete or hide the previous axes also. So during run I will see only the axes which are related to that frame. Here is the python code in per-frame analysis. from chimera import runCommand frame = mdInfo['frame'] runCommand("measure inertia #1:0-120 color yellow") runCommand("measure inertia #1:120-237 color green") Thanks. Ankit

2 2

Help in executing python script in per-frame analysis
by Ankit Agrawal 05 Feb '15

05 Feb '15

Hi I am analysing a protein molecule (MD simulations). I wrote a python script to calculate inertia for the protein and ran it over 40000 frames. I got a data in log file but it is creating a ellipsoid around the molecule. I want 3 axes of the ellipsoid to be shown in that protein molecule not the ellipsoid as it covers the whole protein molecule. So that I can easily visualize the movement of all 3 axes of ellipsoid over the 40000 frames (means how the axes are changing during trajectory run). Thanks Ankit Department of Chemical Science IISER-Mohali, India

2 1

multiple Chimera sessions on Mac
by Vladimir Yarov-Yarovoy 03 Feb '15

03 Feb '15

Hello, Is it possible to open multiple Chimera sessions on Mac OS X Yosemite? I tried to start multiple chimera sessions from different terminal windows that was recommended in this thread - http://www.cgl.ucsf.edu/pipermail/chimera-users/2008-October/003231.html - but it doesn't work. Thank you, Vladimir

2 3

Command line problem
by Luca Pellegrini 03 Feb '15

03 Feb '15

Hi, I am having the following problem when I try to use the command line. When I select ‘Command line’ from the ‘Favorites’ menu, the command line window appears, but I can’t type anything in it. Or rather, I can type in it, because if I hit return the command gets executed, but I can’t see what I type. Any idea of what’s going on? I suspect that it might be something to do with Yosemite 10.10.2, since this problem arose after upgrading the MacOSX operating system. I am using Chimera 1.10.1, build 40415. Thanks for any advice. Kind regards, Luca Luca Pellegrini Department of Biochemistry University of Cambridge 80 Tennis Court Road Cambridge CB2 1GA UK Email: lp212(a)cam.ac.uk Tel: 0044-1223-760469 Fax: 0044-1223-766002 Sanger building, room 3.59

2 2

Error: UnboundLocalError: local variable 'i' referenced before assignment
by Letizia Meregalli 03 Feb '15

03 Feb '15

Hi, I have a tRNA molecule and I would like to measure the angles between two nitrogenous bases. I created two planes, each for each base. When I select both planes, in order to measure the angles between them (Structure Measurements Axes/Planes/Centroids) I get following message: <type 'exceptions.UnboundLocalError'> Exception in Tk callback Function: <bound method SortableTable._browseCmd of <CGLtk.Table.SortableTable instance at 0x117990638>> (type: <type 'instancemethod'>) Args: ('1',) Traceback (innermost last): File "/Applications/Chimera.app/Contents/Resources/lib/python2.7/site-packages/Pmw/Pmw_1_3/lib/PmwBase.py", line 1747, in __call__ return apply(self.func, args) File "/Applications/Chimera.app/Contents/Resources/share/CGLtk/Table.py", line 1043, in _browseCmd self.userBrowseCmd(self.selected()) File "/Applications/Chimera.app/Contents/Resources/share/StructMeasure/Geometry.py", line 268, in _tableCB self.feedback(sels) File "/Applications/Chimera.app/Contents/Resources/share/StructMeasure/Geometry.py", line 113, in feedback diff = " ".join(words2[i:]) <type 'exceptions.UnboundLocalError'>: local variable 'i' referenced before assignment UnboundLocalError: local variable 'i' referenced before assignment File "/Applications/Chimera.app/Contents/Resources/share/StructMeasure/Geometry.py", line 113, in feedback diff = " ".join(words2[i:]) See reply log for Python traceback. I really don’t know how can I solve this problem.. I’d be really grateful if you could help me or give me some hints! thank you a lot Letizia

2 1

Help Needed
by angshu＠klyuniv.ac.in 03 Feb '15

03 Feb '15

Hi, I need a small help. I need to find out the amino acid residues from one chain of a protein which are within 5A of a specific amino acid residue of some another chain of the same protein. For example: Say I have a protein 1XYZ.pdb containing A, B, C chains. I want to find which amino acids from chain B and C are within 5A distance from ALA 78 belonging to chain A. Please let me know. Thanks. Angshuman

2 1

Using Chimera to measure voxel densities
by Noble, Alex 30 Jan '15

30 Jan '15

Hi all, I have a pdb fit into an EM density in Chimera and I would like to be able to see what the nearest voxel densities are at specific atomic coordinates. Is there any way to do this in Chimera? Best, -Alex Noble

3 4

Question
by Monete Rajão Gomes 28 Jan '15

28 Jan '15

Hi, I have some problem these days about superimpose templates with matchmaker. I followed this tutorial http://plato.cgl.ucsf.edu/pipermail/chimera-users/2011-August/006686.html. There are regions on aminoacids sequences which are identical. So, when I superimpose them, they stay separated. I am sending a screenshot attached. It would be great if you could help me. Best, Monete

2 2

Morph conformations - estimated time to completion in status bar?
by Oliver Clarke 26 Jan '15

26 Jan '15

Hi all - silly little feature suggestion, but I was wondering if it would be possible to add an live-updating “x % complete” or “estimated time to completion” entry in the status bar when running Morph Conformations? When morphing two structures with very large numbers of atoms, morph conformations can take a long time (hours) to complete, and it would be handy to know whether it is nearly done or not (currently it just shows “computing interpolation 1” until it is finished). On a related note, is there any way to speed up morph conformations for large structures? E.g calculating transformations using C-alpha atoms only? Best, Oliver.

2 1

modelling a dimer
by David Norman (Staff) 23 Jan '15

23 Jan '15

I am trying to model a symmetrical dimer using modeller within Chimera. I cannot work out how to present the alignment and pdb. files in oder to do this. Any hints please. Thanks David David Norman Ph.D Nucleic Acids Research Group School of Life Sciences MSI/WTB Complex Dow St. Dundee, DD1 5EH, Scotland, UK. phone +44(0)1382 384798 mobile +44(0)7808572788 E.mail d.g.norman(a)dundee.ac.uk Web site: http://www.lifesci.dundee.ac.uk/people/david-norman The University of Dundee is a Scottish Registered Charity, No. SC015096 The University of Dundee is a registered Scottish Charity, No: SC015096

2 1

how to find non-bonded interactions between a protein and a ligand?
by Sam Paul D. 22 Jan '15

22 Jan '15

Hi, I need to find non-bonded interactions between a protein and a ligand through command line. Could anyone please suggest which chimera command to use with the syntax? With regards, Sam

3 4

Find subsequence programatically
by Thomas Hrabe 22 Jan '15

22 Jan '15

Hi Chimera Team, How can I automate the Sequence View -> Edit -> Find Subsequence Tool programmatically with the Chimera shell or better within python? Thank you, Thomas

2 2

Coot capabilities in Chimera
by Mario J. Borgnia 22 Jan '15

22 Jan '15

Dear all, WIth the advent of atomic resolution maps in Cryo-EM, we find ourselves refining structures. The blunt question is, should I move to Coot and leave behind Chimera for that or are there overlapping functions and what will I be missing if I choose to stay with Chimera. I have some ideas about the answers but would like to read what the developers and power users have to say on the issue. Thanks!!!

2 1

How to predict/model the structure of two known structure proteins
by Phan Trong Hoang 22 Jan '15

22 Jan '15

Dear UCSF developers, I am Hoang, working in IPK in Germany. I am following your series online tutorials about how to use UCSF Chimera. This program is very useful for me. However, I did not see your video showing how to predict/model the structure of a fusion protein that is made by combination of two known structure proteins in PDB (for example gi|534286646|pdb|4KRN| and gi|390136394|pdb|4DDF|A). Is this function available in your software? If yes can you show me how to manipulate with it. I would like appreciate it very much Thank you for your attention and I am looking forward to hearing from you. Best regards Hoang Phan

2 3

SDF file
by Hernando J Sosa 22 Jan '15

22 Jan '15

I have an sdf file with a small ligand molecule in 2D (it looks flat when opened in chimera). What would be the best way to make it 3D (i.e. assign/minimize the proper bond angles & distances). Is it possible to do it in chimera? Thanks

3 3

How can one create a sculpted view of a cellular assembly?
by Kenward Vaughan 21 Jan '15

21 Jan '15

As I slowly approach the operational realization of my computational/visualization lab, I received your lovely holiday card. This seriously elevated my dreams of larger scale possibilities for chemistry and biology students through the cellPack resources. In playing with it, I found myself wanting a more robust version of a clipping plane which would have several characteristics: 3 dimensional - take a cell and hack out 1 or 2 adjoining octants relative to its center to give a sliced view similar to what is found in some texts (also often used in geology books to depict the earth's internal structure--see http://www.the-science-site.com/earths-interior.html for an example). Being able to leave the nucleus alone while the surface strips away the cytoplasm would be cool, much like the referenced image above showing the core of the earth. Likely a difficult one to actually implement? Have the clipped surface not be flat, but rather allow a component to stay visible as the surface is moved past it until some determined relationship at which point it vanishes (perhaps when it has passed entirely through the clipping surface?). The clipped surface would thus show structure of a sort. Have the choice of the clipping surface being static with the assembly (it could rotate with the assembly, keeping the same internal view), or separately static (how a clipping plane behaves now--as I know it--where rotating the structure causes things to move through the unmoving plane. One approach I can imagine would be the use of a spherical or ellipsoidal (?) surface of specific size at a specific distance from the center of the cellular assembly. Is this already implemented in a way that can be manipulated to achieve at least the major aspects of this effect (e.g. logical ANDing of clipping by 3 intersecting planes)? Sorry for the long question... ;-/ Kenward -- In a completely rational society, the best of us would aspire to be _teachers_ and the rest of us would have to settle for something less, because passing civilization along from one generation to the next ought to be the highest honor and the highest responsibility anyone could have. - Lee Iacocca

3 3

Ringer/Chimera/IDLE
by Alejandro Virrueta 21 Jan '15

21 Jan '15

Hello, I am modifying some Ringer files for my own needs, but I am running into a weird issue. If I run Ringer via typical means: $RINGER/ringer/ringer -i ringer_in_${pdb_ID}.txt -o ringer_out_${pdb_ID}.txt it works fine. However, when I step through it in what I think is my version of IDLE ("$CHIMERA_HOME/bin/chimera --nogui --nostatus --script `which idle2.7` /usr/bin/idle2.7", with `which idle2.7` returning "/usr/bin/idle2.7"), I run into this error: Traceback (most recent call last): File "/Users/av376/ringer-2.0/ringer/main_copy.py", line 233, in <module> main() File "/Users/av376/ringer-2.0/ringer/main_copy.py", line 161, in main move_set, pdb = structureFile(parameters, path) File "/Users/av376/ringer-2.0/ringer/main_copy.py", line 65, in structureFile pdb = chimera.openModels.open(parameters.pdbfileName) File "/Applications/Chimera.app/Contents/Resources/share/chimera/__init__.py", line 1817, in open checkForChanges=False, noprefs=noprefs) File "/Applications/Chimera.app/Contents/Resources/share/chimera/__init__.py", line 1644, in add makePseudoBondsToMetals(realMolecules) File "/Applications/Chimera.app/Contents/Resources/share/chimera/__init__.py", line 1961, in makePseudoBondsToMetals cmPBG = mol.metalComplexGroup(issueHint=True) File "/Applications/Chimera.app/Contents/Resources/share/chimera/__init__.py", line 119, in _getMetalPbg am.color = preferences.get(MOLECULE_DEFAULT, MOL_COMPLEX_COLOR) File "/Applications/Chimera.app/Contents/Resources/share/chimera/preferences/base.py", line 608, in get forPrefSave=forPrefSave) File "/Applications/Chimera.app/Contents/Resources/share/chimera/preferences/base.py", line 179, in get return self._options[name].get(forPrefSave=forPrefSave) File "/Applications/Chimera.app/Contents/Resources/share/chimera/preferences/base.py", line 80, in get return self.prefToVal(self.value) File "/Applications/Chimera.app/Contents/Resources/share/chimera/tkoptions.py", line 1229, in _prefToColor return getColorByName(pref) File "/Applications/Chimera.app/Contents/Resources/share/chimera/colorTable.py", line 87, in getColorByName color = chimera.MaterialColor(r/255.0, g/255.0, b/255.0) ValueError: missing default material Any suggestions? Cheers, Alex

2 1

Alternate conformations in residues
by Alejandro Virrueta 21 Jan '15

21 Jan '15

Hello all, Is there a way to get the all the information for an alternate conformation from a residue object? I have res.altLocs resulting in set([a,b]), but how can I get chi1-4 for conformation b for example? Thanks! Alex

2 1

Alternate conformations in residues
by Alejandro Virrueta 21 Jan '15

21 Jan '15

Hello all, Is there a way to get the all the information for an alternate conformation from a residue object? I have res.altLocs resulting in set([a,b]), but how can I get chi1-4 for conformation b for example? Thanks! Alex

1 0