- Chimera-users - RBVI Mailing Lists

Command line history
by Damien Larivière 20 Jun '13

20 Jun '13

Dear All, I just installed the last release for Windows (June 07, 2013). I would like to get back the command line history I had in the previous version. I saved this command line history in a file named/chimera.cmd/. May you tell where to copy/chimera.cmd/ in the program files of my new Chimera? (I've made a search in the Windows explorer for /chimera.cmd/ but nothing was returned) Thanks, Damien

2 2

Hydrophobicity surface
by Anne Simonsen 19 Jun '13

19 Jun '13

Dear Chimera helpers, I'm trying to make a figure showing the hydrophobic surface of one chain (chain A in attached IGA1.pdb file) with a peptide (chain B) shown as ribbon with residues, but I then get a "hole" in the A surface around the peptide (see attached figure). Can you please advice? Thank you! Best wishes, Anne -- Anne Simonsen, PhD, Professor Dept. of Biochemistry, Institute of Basic Medical Sciences University of Oslo, P.B. 1112 Blindern 0317 Oslo, Norway Visiting address: Domus Medica, room 3174 Sognsvannsveien 9 0372 Oslo Phone: +47 22 851110 Fax: +47 22 851058 Mobile: +47 99350960 email: anne.simonsen(a)medisin.uio.no http://www.med.uio.no/imb/english/research/groups/autophagy/

2 1

adding an O in compound 1
by Ibai Gazpio 18 Jun '13

18 Jun '13

Hi all, I'm trying to add an O molecule as compound 1 bound to a Fe of an Hem group. I use a program called GOLD to perform dockings but this doesn't recognize this O atom type, that is a O.3 type.. The output should be a mol2 file. Which atom type should I use? Ibai.

3 2

Chimeras limited capability to visualize correctly molecular structure
by Marek Maly 18 Jun '13

18 Jun '13

Hello all, recently was sent to the Amber mailing list question about how to proceed here with simulation of the piece of graphene. I was just curious about the molecular structure so I tried to visualize attached PDB file in Chimera which was not able to show correct structure so I visualized it using VMD and also Vega ZZ in both cases without any problem. Then I used Vega ZZ to create MOL2 file and tried again to use Chimera for visualizing graphene saved now in MOL2 format but again without success. So maybe there is still some space for improvement of Chimera visualizing capability. Especially in case of MOL2 format I was surprised that Chimera is not able to show correct molecular structure as in this case all the information (including bonds/connectivity info) is included in the input file. All files are attached. (my version of Chimera is: candidate version 1.8 (build 38694)) Best wishes, Marek -- Tato zpráva byla vytvořena převratným poštovním klientem Opery: http://www.opera.com/mail/

4 5

Chimera - ball and stick - 3D printing
by Francois Richard 18 Jun '13

18 Jun '13

Hi everyone, I am trying to print a molecule from its PDB file (ID : 2BEG) using chimera and a 3D printer. I would like to print the ball and stick representation of the molecule, including the hydrogen bond. So far, (using this link : http://www.cgl.ucsf.edu/Outreach/technotes/ModelGallery/index.html) I played with molmap and volume commands and managed to print a volume but it does not include hydrogen bond. Do you have any idea how to improve the output? Thanks a lot, Francois

2 1

protein schematic representaton
by francesco oteri 13 Jun '13

13 Jun '13

Good morning to everybody, someone of you knows whether exist a program that creates schematic representation of a protein like the one in plot b and d of the figure: http://www.nature.com/nature/journal/v427/n6972/fig_tab/nature02165_F3.html Greetings, Francesco

3 3

Missing segment confuses addH
by Sam Egel 13 Jun '13

13 Jun '13

Hi, Basic Problem: I am attempting to use the addH tool on a metal containing active site I have extracted. The problem is that Chimera draws an 11 angstrom pseudo bond representing a missing segment between two residues. This bond seems to be the reason that a terminal carbon is receiving only two hydrogens rather than three. The pseudo bond runs right through the bond axis between two other carbons, both of which are protonated correctly. Can anyone please explain how to actually delete this bond (hiding through ~longbond, closing or hiding through the pseudo bond panel does not work) or provide another method to get this carbon to have three protons? I'm running v 1.6.2 of Chimera locally on Win 7 and the same problem occurs on a remote Red Hat Enterprise Linux machine running v 1.5 of Chimera. More Detail: Getting this carbon protonated in a one-stop-shop by Chimera would save me the world of time for a number of reasons, including that I need to make many files of this active site and every pdb of this enzyme has the same addH/pseudo bond problem between the same residues. The active site was extracted by writing a 10 angstrom zone around the metal to a pdb and then hand selecting the residues I cared about from there and writing them to a pdb. Workarounds: I have tried using command line ~longbond, hiding and closing out the missing segments option in the pseudo bonds panel, and deleting the bond by highlighting it and trying to delete bond under the adjust bond tab in modify structure window. If I write the pdb to an xyz (Molden) and open the xyz in Chimera, addH works just fine. However, I would really like for these files to be real pdbs that have associated residue names at the moment (residue names are, of course, deleted when converted to xyz). Thank you for your time, Sam

3 2

display of glycine atoms
by Levandoski, Mark 11 Jun '13

11 Jun '13

Hello there - I recently got a new office machine and had to reload Chimera. Although I do not recall the number of the version I had used in the past, empirically I can tell that this is some updated version. My problem is that I am trying to display various residues of a protein selectively as space-filling ("sphere") on a ribbon frame. One residue of interest is a glycine. This version of Chimera seems incapable (or I am incapable of discovering how!) of displaying the various atoms belonging to this glycine residue. All other residues seem fine. Is this a glitch? Am I doing something wrong? For comparison, I have every confidence that this should work because with my older version of the program I was able to generate just such a view. Thank you very much in advance for the help, Mark P.S. By selecting the glycine of interest I am able to color the strip of ribbon by preset color, but not by element. Mark M. Levandoski Associate Professor of Chemistry Grinnell College 641-269-4544

2 2

Selecting regions of a PDB structure
by Anindito Sen 11 Jun '13

11 Jun '13

Dear All, I have a pdb file of a large protein complex. I want to select several regions and color them differently to show the various domains. How can I do that. Thanks Andy Dr. Anindito Sen (Ph.D) >Department of Cell Biology & Anatomy >Graduate School of Medicine >University of Tokyo >Tel & fax: +81-3-5841-3339

3 2

Re: [Chimera-users] movie of flying in a density map
by Tom Goddard 11 Jun '13

11 Jun '13

Hi Andy, The way to use saved positions in an animation is to save a session which includes all the saved positions. Then to make the animation you first open that session and then use the "fly" or "reset" command in a script with those named positions. This is a general method for making animations that works quite well. Setup everything in a session (which models are open, where they are placed, colors, lighting, background color, shadows, …), then just use an animation script to modify a few things. If you instead try to do all the setup in a script with no session it is much harder. I don't understand your question about clipping. Normally Chimera does not clip your maps when you zoom in. Only if you turn on clipping or make your view point move right through the map would you see clipping. Tom On Jun 11, 2013, at 1:07 AM, Anindito Sen wrote: > Hi Tom, > > In the Video tutorial about making a movie of flying through the protein complex - how can I have the positions saved (sav pos) and put it in a script. The idea is to modify a script that makes a density map rotate (which I already have) and then fly in through that. I can then alter the script accordingly to show different regions of the map (and will not need to type the whole set of commands). > > Secondly how can modify my script to zoom-in a density map without clipping the region of interest. It is obvious that a major portion of the map will be outside the view but the clipping plane will not move and clip the map (like when we zoom in manually in the Chimera window using the mouse. > > Thanks > > Andy > >> Dr. Anindito Sen (Ph.D) >> Department of Cell Biology & Anatomy >> Graduate School of Medicine >> University of Tokyo

1 0

ligating two models
by Bala subramanian 06 Jun '13

06 Jun '13

Friends, What is the best method in chimera to ligate two models. I have generated a small ligand that has to be attached attached to a protein residue. Thanks in advance, Bala -- C. Balasubramanian

2 1

Maximum volume size
by Tom Goddard 05 Jun '13

05 Jun '13

Hi Svetla, Chimera is correctly handling your 880x880x880 map. But by default Chimera displays only a single plane of very large maps, because the most common case of this is with tomograms where a single plane display is usually what you want. When it does this the Volume Viewer dialog shows a "Planes" slider in the dialog, and below that is a button "All" that will show all planes. If you want Chimera to always show the full map, use Volume Viewer menu entry Features / Data Display Options, and click off "Show plane when data larger than N Mvoxels", and then use Features / Save Default Dialog Settings so it will use that setting in all future uses of Chimera. Tom On Jun 5, 2013, at 9:54 AM, "Stoilova-McPhie, Svetla" wrote: > Dear Tom, > > Are there any limitation for the size of 3D map/volume the Volume viewer can visualize? > > We tried a 880x880x880 voxels map generated with spider and it comes out as a 2D map: 880x880x1. > WE triple checked and the volume file dimensions are indeed 880x880x880 and can be visualized as a 3D volume in the EMAN2 viewer. > > Please advise. > > Best regards, > > > Svetla Stoilova-McPhie, PhD > Assistant Professor, > Department of Neuroscience and Cell Biology > Scientist, Sealy Centre for Structural Biology > and Molecular Biophysics > University of Texas Medical Branch at Galveston > 301 University Boulevard, Galveston, Texas 77555-0620

1 0

sementation
by Jingchuan Sun 05 Jun '13

05 Jun '13

Hello, After segmentation of a 3D map into 16 subunits and assign different colors, the saved .seg map does not save the color. During the preparation of our recent paper, we had to assign the color each time we open the .seg (hundreds of times), which make me very upset, even angry sometime. If the guy writing the program allow us to save the assigned color, that would have saved us many times. Thanks! Jim

2 2

Re: [Chimera-users] Flip handedness of map
by Tom Goddard 05 Jun '13

05 Jun '13

Hi Michael, To flip the hand of map #0 use vop zflip #0 This makes a copy of the map with the z-planes in reverse order. Tom On Jun 4, 2013, at 9:09 PM, Michael Stowell wrote: > Tom, > > There used to be a simple way to change the handedness of a map in Chimera, just use a negative voxel number. However, this no longer works but rather gives an error. Is there a new way to achieve this. This is very helpful when assessing the handedness of EM maps. > > Thanks > > m > > Michael H. B. Stowell > MCD Biology and Mechanical Engineering Departments > University of Colorado > Boulder, CO

1 0

Request for assistance
by Zachary W. Carpenter 04 Jun '13

04 Jun '13

Dear Chimera, I have been a long time user and really love your software. Recently I have used and cited Chimera in 4 high impact publications. One in mBio, two in nature medicine, and a final one in review at Nature Genetics. I have used Chimera to make beautiful images of mutations that we identify in NGS data of tumors. My role has become interpreting the effects of mutations on crystal structure. Thus far this has not been difficult as the effects of the mutations have been obvious. A recent finding however has left me extremely perplexed and I have need for greater accuracy of structural modeling of the mutations. I was wondering if you can put me in the right direction for creating models of mutations that are more reliable then just using Modeller or I-Tasser with the mutant in the sequence to be predicted. I know this is an elaborate question but I'd like to know which Chimera tools I can use to help me along this path. Or if I need to use totally new software/ methods. Thanks for your time, Zach -- Zachary W. Carpenter Department of Pharmacology College of Physicians and Surgeons Columbia University 630 West 168th Street New York, NY 10032 Email: ZWC2101(a)Columbia.edu

2 3

To build ssDNA to base pair with the other strand of DNA
by Wei Shi 04 Jun '13

04 Jun '13

Hi all, I am working on solving the crystal structure of a protein-DNA complex. I could complete one strand of the DNA to fit the electron density using Coot, but for the other strand, the density for several bases at each end of the DNA is not clear and it's missing several bases at each end of the DNA. I am wondering whether in chimera, there is a function I could use to build the missing bases in one strand of the DNA to base pair with the other strand of DNA which is complete. Thank you so much! Best, Wei

2 2

Re: [Chimera-users] Just starting out
by burt.goldberg＠gmail.com 03 Jun '13

03 Jun '13

Dear Elaine, it is very hard for Senior faculty to audit a class. As for the Biochemistry well I have been teaching it for several decades. My interest is to learn how to use Chimera better and I will be working with a post doc experienced in using Chimera. I just want to read so I can ask intelligent questions. I am employing this in an on going research project. Thank you again for you help. ------Original Message------ From: Elaine Meng To: burt.goldberg(a)gmail.com Cc: chimera-users(a)cgl.ucsf.edu List ReplyTo: chimera-users(a)cgl.ucsf.edu List Subject: Re: [Chimera-users] Just starting out Sent: Jun 1, 2013 12:53 PM Hi Burt, This forum is meant for questions about the Chimera program. Proteomics and informatics are vastly broader areas. You might want to look for recent textbooks and journal articles on those topics, and/or audit some classes, and/or attend the group meetings and seminars of academic researchers in those areas. It's not clear whether learning Chimera should be one of your goals at this point. Which tools and programs are needed depend on the research problem at hand, and the types of data that are available for tackling that problem. If you do want to learn how to use Chimera, there are indeed several step-by-step tutorials. Before doing any tutorials you can explore the website just to get a better sense of what the program is for: <http://www.cgl.ucsf.edu/chimera/index.html> The "Quick Links" section on that page includes tutorials. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Jun 1, 2013, at 9:34 AM, burt.goldberg(a)gmail.com wrote: > Dear all, after 40+ years doing wet work I had to leave the bench, medical reasons, and so although my students continue doing work at the bench I have decide to go the route of proteimics and informatic for myself. The informatics is fine. How do I get started on the proteimics? Does the tutorial help? Any thing some one can suggest I read first? Thank, Burt > Sent via BlackBerry from T-Mobile Sent via BlackBerry from T-Mobile

2 1

How to calculate the deviation of two ligands in the same pocket
by felipe vasquez 03 Jun '13

03 Jun '13

Hi, I am working on the modeling of one ligand in a native and mutant receptor. The ligand occupies different positions in the binding cavity, and I am interested in estimate this difference. However, if RMSD is calculated via MatchMaker, the ligand in mutant receptor (non-reference) is moved from its original position to try to minimize the deviation compared to ligand in native receptor (reference). How can I calculate the difference in the ligand position between the two receptors, in an appropriate manner? Best regards, * * *Andrés Felipe Vásquez J., MSc.* Grupo de Fisiología Molecular Instituto Nacional de Salud Avenida calle 26 No. 51-20 - Zona 6 CAN Bogotá, D.C., Colombia

2 3

How to force Chimera to properly analyze and visualize in each MD movie frame the ribon representation of the protein structure ?
by Marek Maly 01 Jun '13

01 Jun '13

Dear all, I just found that if one loads several frames from the simulation (Amber prmtop + inpcrd, *.rst files) chimera calculate/set the character of ribons (random colil, beta sheet, alpha helix) just using the first loaded frame and even if structure of the protein is changing in the next frames (e.g. forming beta sheet structure from the originally random coil), the visual ribon representation is not changed. I found this, when I loaded just the isolated frame from the simulation and saw nice forming of the local beta sheet which was nicely highlighted by proper ribon representation (wide arrow) in the palce where was originally (in the initial frame) just random coil. But when I loaded both (initial frame and that after some MD simulation), chimera keep to use random coil representation for both frames. I did also reverse experiment i.e. first loaded later frame from MD simulation and then the initial frame and this time chimera fixed for both frames beta sheet representation in that protein area. Please is there any possibility to prevent such unwanted behavior and to force Chimera that analyses properly protein configuration at each loaded frame and eventually changes properly the ribon representation ? Thank you in advance for any useful advices ! Best wishes, Marek -- Tato zpráva byla vytvořena převratným poštovním klientem Opery: http://www.opera.com/mail/

3 4

fetching EDS files from the web (python script)
by Laleh 31 May '13

31 May '13

Hello. I'm wondering how I can fetch a bunch of EDS files (from the EDS server) and save them in my local machine in .mrc format. I don't want to do this manually one by one from the user interface... I tried to use open_volume_file with different settings; but it is not working... I'm surprised because this is very starightforward with pdb files. I appreciate your help. Thanks in Advance, Laleh

3 2

castP, Chimera and atom numbers
by Boaz Shaanan 29 May '13

29 May '13

Hi, Apparently Chimera insists on consecutive serial atom numbers (the first column after ATOM in the pdb file) when it reads in castp files. If that's not the case (as most often happens when hydrogens are attached during the refinement run but are not written out to the final pdb) Chimera complains about incompatibility between the mouth file and coordinates and refuses to read in the castp files. This is my first encounter with a program that cares about the atom number column but I learnt it the hard way. Cheers, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il Phone: 972-8-647-2220 Skype: boaz.shaanan Fax: 972-8-647-2992 or 972-8-646-1710

2 1

Tube representation picture of the eigenvector
by Prasanna Venkatesh 29 May '13

29 May '13

Dear Chimera users and supporters, I would like to generate a tube representation picture similar to one in the article (Figure 5 in "MD Simulations of Papillomavirus DNA-E2 Protein Complexes Hints at a Protein Structural Code for DNA Deformation"). Through Gromacs, I have average.pdb and extreme.pdb of my protein for the MD simulations. Please help me by providing the steps to make the picture. I asked the question earlier but not getting the similar picture with the answer provided. I don't know I asked it right the last time. Thank you in advance. Regards, Prasanna.

3 4

How to deselect a subset of atoms in a non-standard residue
by felipe vasquez 28 May '13

28 May '13

Hi, I am trying to select all hydrogens atoms in a protein structure to achieve an energy minimization process. However, I would like to discard of the selection the hydrogen atoms of a non-standard residue (in my case a cofactor, NADPH). How can I deselect only this subset of hydrogen atoms of the whole hydrogens selection? Best regards, *Andrés Felipe Vásquez J., MSc.* Grupo de Fisiología Molecular Instituto Nacional de Salud Avenida calle 26 No. 51-20 - Zona 6 CAN Bogotá, D.C., Colombia

2 2

How to delete range of solvent molecules
by felipe vasquez 22 May '13

22 May '13

Hi, I am trying to prepare a protein structure for docking, and I want to keep just one or a couple of water molecules. How can I do achieve this goal, deleting the rest of solvent molecules? Thanks in advance. Best regards, * * * * *Andrés Felipe Vásquez J., MSc.* Grupo de Fisiología Molecular Instituto Nacional de Salud Avenida calle 26 No. 51-20 - Zona 6 CAN Bogotá, D.C., Colombia

2 1

Distance measuring
by T-I 22 May '13

22 May '13

Dear Chimera, I want to know something very simple which is making my life very difficult at the moment. I have an EM map of a virus capsid and I would like to make various distance measurements. I simply want to draw a strait line and measure it or place two points on the map and measure the distance between them. I have read all your help files on this matter and I cannot make any sense out of the instructions Can you help me out ? Thankyou Mr A.I

2 1