- Chimera-users - RBVI Mailing Lists

Chimera Error
by יוכבד 13 Dec '10

13 Dec '10

---------- Forwarded message ---------- From: יוכבד <ybaime(a)gmail.com> Date: Mon, Dec 13, 2010 at 11:44 AM Subject: Chimera Error To: chimera-users(a)cgl.ucsf.edu Hi I'm trying to open a density map file using chimera and for some reason the file won't open. The opening is followed by an error message regarding the file size being too small for the grid size. The same error appears also in the old version (1.4.1) and also in the newest version. How can I solve this problem? How can I change the grid size? The same file opens successfully on a friends computer with the 1.4.1 version and so I assume the file is not corrupted. Attached is an image of the error message. I'd appreciate your response. Thank you Yocheved Baime Bar-Ilan univ.

2 1

Calculating Solvent Accessible Surface of individual residue in a model
by Sumitro Harjanto 10 Dec '10

10 Dec '10

Hi Meng, I would like to find out if I can use Chimera to calculate the solvent accessible surface(SAS) of each residue in a model..? I would like to find out, basically, if I show the surface of the molecule, which are the residues buried (SAS = 0) and which are the ones contributing to the surface contour (SAS > 0). Thanks! =] Cheers, Sumitro Institute for Infocomm Research disclaimer: "This email is confidential and may be privileged. If you are not the intended recipient, please delete it and notify us immediately. Please do not copy or use it for any purpose, or disclose its contents to any other person. Thank you."

3 2

Measuring the volume enclosed by a complex
by Anindito Sen 10 Dec '10

10 Dec '10

Dear All This question may have been answered before but will be helpful if you can let me know - How can I measure the volume enclosed by a protein complex. Thanks Andy Dr. Anindito Sen (Ph.D) School of Biological Sciences University of Auckland 3A Symonds Street Room 420 Auckland City. New Zealand. Tel: +64 -9- 373-7599 ext: 87593

2 1

Recommended HW for Chimera 3D
by Marek Basler 07 Dec '10

07 Dec '10

Hi, what would be recommended HW and OS for trouble free 3D using glasses with new 120Hz LCDs? Linux or Win? What is the best graphics card? I don't care about money but nothing crazy either. Any suggestions? Thanks a lot! Marek

3 2

Re: [Chimera-users] Query regarding Fit in Map
by Tom Goddard 07 Dec '10

07 Dec '10

Hi Arun, So you just want to measure the correlation for a selected atoms in a map, no fit optimization. This can be done without Python. Make a simulated map with the Chimera "molmap" command, and report the correlation with "measure correlation". molmap sel 12.5 modelId #5 measure correlation #5 #0 Here the map is #0, selected atoms are referred to using "sel" and a simulated map for those atoms is created as model #5. Results with be in Chimera reply log (menu Favorites / Reply Log). I don't think you want to turn off the "use only data above contour level". If you do it will measure the correlation of the entire box of simulated data including all the zeros far from the atom, which probably will not match the non-zeros in your map. If you really want that use option "aboveThreshold false" with the measure correlation command. http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/molmap.html http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/measure.html#correlat… Tom > Hi Tom, > > Thank you very much for your kind reply. It is quite helpful to know. > I am able to run the script and fit a map on to a map. But the problem > at had is slightly different. I have got the fits done already with > Flex-EM and I am actually trying to measure (ideally automate it with > the Chimera script) the correlation for the currently selected atoms > in the given map using the 'Update' option available in the Fit in Map > dialog. I would also like to specify the following option in the script. > > Real-time correlation / average update (turn off within the script) > Use map simulated from atoms, resolution = value > use only date above contour level from the first map (turn off within > the script) > optimize correlation > correlation calculates about mean data value (turn off within the script) > rotation (turn off within the script) > shitf (turn off within the script) > Move whole molecule (turn off within the script) > > I am not sure how to put all this options in a script and calculate > the correlation for the currently selected atoms with the Update > option. I would greatly appreciate if you could provide me with some > more insight on how to change the code specifically. Thanking you. > > with kind regards, > Arun Prasad > > > Tom Goddard wrote: >> Hi Arun, >> >> Yes you can use Fit in Map in a script. I've attached an example >> Python script. This script comes from the Chimera Python scripts web >> page but that web site is down right now. It is necessary to use >> Python rather than a simpler Chimera command script because there is >> no Chimera command to use Fit in Map. There probably should be, but >> since Fit in Map only does a local optimization you need some way to >> initially position the molecule or map you are fitting. That is the >> hard part and so there hasn't been much demand for the fitting command. >> >> The Python code for the Fit in Map dialog is included in all >> Chimera distributions in the directory >> >> chimera/share/FitMap >> >> You could look at the __init__.py and gui.py to learn what the >> available functions are. The gui.py (graphical user interface) file >> shows how those functions are called by the dialog. >> >> Tom >> >>> Hi all, >>> >>> I would like to know whether its possible to automate the operations >>> available with 'Fit in Map' tool and its options within a script. >>> Actually I would like to calculate the correlation for certain segments >>> of the atomic structure and it would be help if I could do it with a >>> script rather that the GUI. Any suggestion is greatly appreciated. >>> >>> Thank you, >>> Arun Prasad >>> _______________________________________________ >>> Chimera-users mailing list >>> Chimera-users(a)cgl.ucsf.edu >>> http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users >>> >> >> >

1 1

problem in showing disulfide bonds
by Pardeep kumar 06 Dec '10

06 Dec '10

Hi, I am unable to show disulfide bonds in my final structure. It has at least five disulfide bonds. Please tell me how can I do that???and how can I save the image as a post script file....I tried it by save as .ps file but then the save file was not there in the designated folder though other formats (eg jpeg) were easily saved....

3 2

"Surface calculation failed, mscalc returned code 5"
by Sumitro Harjanto 06 Dec '10

06 Dec '10

Hi Meng, I've run into this problem a few times when I wanted to calculate and show the surface of a pdb model. I got the following on my reply log: C:\Chimera\bin\mscalc.exe 1.400000 2.000000 1 Calculation of some surface components failed. Falling back to single-component calculation. C:\Chimera\bin\mscalc.exe 1.400000 2.000000 0 Surface calculation failed, mscalc returned code 5 Sometimes I managed to go around it by resaving the pdb file in Chimera, or removing some irrelevant chains. but other times it just doesn't work. Any suggestions? One particular file that gives me the problem is 1IGT from PDB. I've tried removing all the heteroatoms and water molec, for I only need the chains A, B, C and D. but still the problem persists. Thanks! Cheers, Sumitro Institute for Infocomm Research disclaimer: "This email is confidential and may be privileged. If you are not the intended recipient, please delete it and notify us immediately. Please do not copy or use it for any purpose, or disclose its contents to any other person. Thank you."

2 2

Query regarding Fit in Map
by Arun Prasad Pandurangan 03 Dec '10

03 Dec '10

Hi all, I would like to know whether its possible to automate the operations available with 'Fit in Map' tool and its options within a script. Actually I would like to calculate the correlation for certain segments of the atomic structure and it would be help if I could do it with a script rather that the GUI. Any suggestion is greatly appreciated. Thank you, Arun Prasad

2 1

need examples of Chimera crash on Mac OS X 10.6.5
by Greg Couch 03 Dec '10

03 Dec '10

There have been occasional reports of Chimera crashing in the graphics driver on Mac OS X 10.6.5. However, the reports have not included enough information to allow us to reproduce the problem and debug it. If you observe this crash, please report it to Apple (a dialog to do this will appear when the crash happens). The next time you start Chimera after the crash, another dialog will appear with the option to send us a bug report too. Please go ahead and do that, including a description of what you were doing before the crash, and your email address in case we need to request further details. Thank you, Greg

2 1

how to product a color scale bar
by C.J. 03 Dec '10

03 Dec '10

Dear all, I am writing to ask how to product a scale bar to indicating different radius with different color when I visualizing a spheric structure with Chimera. Thanks. Regards! C.J.

2 2

unable to show disulfide bonds
by Mahlawat, Pardeep 02 Dec '10

02 Dec '10

Hi, I am unable to show disulfide bonds in my final structure. It has at least five disulfide bonds. Please tell me how can I do that???and how can I save the image as a post script file....I tried it by save as .ps file but then the save file was not there in the designated folder though other formats (eg jpeg) were easily saved....

1 0

display angle label
by Gesa Volkers 02 Dec '10

02 Dec '10

Dear all, I measured an angle (or better torsion) between four atoms. How can I display the angle with a label? I only found how to diplay measured distances with a label, but not angles/torsions. Thanks in advance, Gesa -- Gesa Volkers Institut für Biochemie, Molekulare Strukturbiologie Felix-Hausdorff-Straße 4 17489 Greifswald Germany +49 (3834)-864392

2 1

Re: [Chimera-users] Exporting .stl
by Greg Couch 01 Dec '10

01 Dec '10

Forgot to reply to list as well. -------- Original Message -------- Subject: Re: [Chimera-users] Exporting .stl Date: Tue, 30 Nov 2010 13:33:23 -0800 From: Greg Couch <gregc(a)cgl.ucsf.edu> To: Dennis Kolva <dk429(a)cornell.edu> On 11/25/2010 06:29 PM, Dennis Kolva wrote: > I have been using Chimera to export .stl files of proteins and RNA for 3D printing. The surface models print OK, but sticks or ribbons choke the printer. I looked close at the output meshes, and they have many extra surfaces which should be removed to make "legal" .stl format. > > Is that portion of the code open source? I'd like to take a closer look and see if it's possible to fix. It would be much easier to rectify the bad surfaces upon creation, rather than trying to remove them by post-processing. > > Thanks, > > Dennis Kolva > Cornell U. Presumably , you don't have a Z-Corp printer and their ZPrint software, otherwise you would output VRML from chimera and have ZPrint do the proper conversion to STL. So yes, the source code is available at http://plato.cgl.ucsf.edu/trac/chimera/browser/trunk/apps/x3d2/stl, and we would welcome improvements. I believe that the problem is that chimera does not output manifold geometry and that the X3D to STL converter would need to perform CSG operations on all of the geometry, especially the spheres and cylinders, to eliminate interpenetrating surfaces. Another issue to consider is what to do about ribbons and cylinders that are too thin for the printer you're using. Feel free to contact me directly with questions about the code or use the chimera developers mailing list, chimera-dev(a)cgl.ucsf.edu, Greg

1 0

pythonw.exe error
by Hunmin JUNG 01 Dec '10

01 Dec '10

Hi, Whenever I open the chimera after the installation, it gives me an error 'pythonw.exe has stopped working'. It didn't matter the version of the chimera. Please what I need to do to resolve the problem. Thanks, Hunmin (Mike) Jung Department of Chemistry Texas A&M University (979)862-7639

2 1

Closest Waters
by Beale, John 30 Nov '10

30 Nov '10

I am working with a protein in explicit water. Using AMBER tools, I have selected the 100 closest water molecules in and around the protein. Is there a way in Chimera to identify which amino acid residues that the waters are hydrogen bonded to? Or, is there a way to visualize which amino acids the water molecules are closest to? Thanks! John M. Beale, Jr., Ph.D. Professor of Medicinal Chemistry and Pharmacognosy Saint Louis College of Pharmacy 4588 Parkview Place Saint Louis, Missouri 63110 314-446-8461 Cell: 314-315-0409 FAX: 314-446-8460 jbeale(a)stlcop.edu<mailto:jbeale@stlcop.edu>

3 4

Merging mrc map
by Massimiliano MALETTA 30 Nov '10

30 Nov '10

Hello I would like to know if merging two maps is possible in Chimera. I have two *mrc map files and I would like to figure out how to get a third file containing the two maps, just summed. I tried the option morph volume, but in fact it is always down weighting one of them respect to the other. Thank you for the help. ----------------------------- Post-doc IGBMC/ FRANCE MALETTA Massimiliano Equipe/Service: KLAHOLZ TEL : +33 (0) 3 88 65 57 53 FAX : +33 (0) 3 88 65 32 01

2 2

reset/stereo
by Dougherty, Matthew T 29 Nov '10

29 Nov '10

I had a couple questions about using the reset command. Let's say I have two keyframes (e.g., kf0,kf1) such that the stereo parameters are different between the two. 1) If I do a "savepos kf0" are the stereo parameters saved as part of the keyframe? 2) If I start at kf0 and do a "reset kf1 100", should the stereo parameters be interpolated across the 100 frames? thanks, Matt

3 6

3D dashed lines
by M Sundaramoorthy 29 Nov '10

29 Nov '10

I like to show pseudobonds (H-bonds, metal coordinations and distances) as solid dotted or dashed lines. To draw dashed/dotted line I can choose dashed line style in the Pseduobond attributes panel. But it works only with bond style 'wire' not with 'stick'. It can essentially draws flat lines. How do I show 3D dashed/dotted lines? Some images in the tutorial do have such lines represented as dotted (spheres) lines. Another problem I have is that the Side View panel shows the image but does not show the eye (the small square) and the clipping planes (vertical lines). I am using Chimera 1.5rc in Windows Vista. Thanks Sundar

3 4

Exporting .stl
by Dennis Kolva 25 Nov '10

25 Nov '10

I have been using Chimera to export .stl files of proteins and RNA for 3D printing. The surface models print OK, but sticks or ribbons choke the printer. I looked close at the output meshes, and they have many extra surfaces which should be removed to make "legal" .stl format. Is that portion of the code open source? I'd like to take a closer look and see if it's possible to fix. It would be much easier to rectify the bad surfaces upon creation, rather than trying to remove them by post-processing. Thanks, Dennis Kolva Cornell U.

1 0

PDB with C alpha carbons only
by Sujata 23 Nov '10

23 Nov '10

Hi, I have a PDB file with C-alpha carbons only. I want to know if Chimera can add backbone atoms and sidechains (the PDB has the names of the residues). Thanks, Sujata

2 1

Re: [Chimera-users] Fwd: Re: 3D stereo
by Nadir T. Mrabet 22 Nov '10

22 Nov '10

Hi Greg, Both DepthQ and Christie (made in fact by the same manufacturer. http://www.depthq.com/projector.html; http://www.depthq.com/christie.html) are, as expected, sold in France by a unique firm. They say that DepthQ HDs3D-1 ($2,995) has no capability for 3D for a conference room with 30-50 people, and that my only option is Christie (> $65,000!). Your earlier mail states that DepthQ can go along with a 3-meter size screen, suggesting it could accommodate an audience of 30-50 people. Can you, please, comment on all these issues and eventually let me know if I can go along with DepthQ DLP? Many thanks in advance. Best, Nadir Pr. Nadir T. Mrabet Structural& Molecular Biochemistry Nutrigenex - INSERM U-954 Nancy University, School of Medicine 9, Avenue de la Foret de Haye, BP 184 54505 Vandoeuvre-les-Nancy Cedex France Phone: +33 (0)3.83.68.32.73 Fax: +33 (0)3.83.68.32.79 E-mail: Nadir.Mrabet<at> medecine.uhp-nancy.fr Cell.: +33 (0)6.11.35.69.09 LEGAL NOTICE Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. Access to this E-mail by anyone else is unauthorized. If you are not an addressee, any disclosure or copying of the contents of this E-mail, or any action taken (or not taken) in reliance on it, is unauthorized and may be unlawful. If you are not an addressee, please inform the sender immediately. On 28/09/2010 12:59, Greg Couch wrote: > > Subject: Re: [Chimera-users] 3D stereo > Date: Tue, 28 Sep 2010 12:59:13 -0700 > From: Greg Couch <gregc(a)cgl.ucsf.edu> > To: Nadir.Mrabet(a)medecine.uhp-nancy.fr > CC: Chimera-users(a)cgl.ucsf.edu > > > > On 07/21/2010 07:24 AM, Nadir T. Mrabet wrote: > > Hi, > > > > This is for teaching purposes so that students can "walk" though 3D structures. Would it be possible to use Chimera via a 3D stereo beamer to project display on a very large screen and watch the selected structure in 3D by means of shutter glasses? If this is so, what kind of equipment would you recommend? > > > > Many thanks, > > > > Nadir > > So there were some developments at SIGGRAPH, but nothing that would > change the previous recommendations made in the chimera-users mailing list. > > To summarize, for a large group of people, you want a setup similar to > what is done for 3D movies in a movie theater, which is to use left-hand > and right-hand circularly polarized light for the left-eye and right-eye > images. There are three parts to the setup: (1) projecting the stereo > images, (2) reflecting the images, (3) receiving the images at the eyes. > > 1. For projecting the stereo images with chimera, you need a > workstation-class graphics card, either an AMD FirePro (or ATI FireGL) > or a NVIDIA Quadro (or Quadro FX, not Quadro NVS), and either (a) two > projectors with passive polarizers, or (b) a single projector with an > active polarizers. The single projector method is much simpler to > maintain because you don't have to keep aligning the two projectors, but > may cost more because the projector has to be able to display at 120Hz > (and there's the cost of the active polarizer). The relative costs of > the two options vary. Active polarizers are available from DepthQ, > http://www.depthq.com/, and RealD, > http://www.reald.com/Content/professional.aspx. DepthQ also sells a 3D > projector that can display 3 meter wide images, and has European > distributers, so that might be the best choice. If you want a larger > image, you'll need a Christie Mirage or a Barco projector. > > 2. To reflect the stereo images, you need a screen that doesn't change > the polarization of the light. There are lots of choices. Google for > "3D projection screen" to see what's available. What screen you want > depends on the layout of the room that the stereo projection will be > in. Narrow rooms can use screens with a smaller viewing cone and higher > gain. I've heard good things about Stewart Filmscreen, but get > recommendations from whoever you buy your projector too. > > 3. Last part of making sure each eye only receives the image it is > supposed to is for the person to wear circularly polarized glasses. > Google for "polarized 3d glasses" to see what's available. I'd avoid > the disposable paper ones. I like the RealD glasses that the movie > theaters use. Perhaps a theater would sell some to you. The glasses > from Zalman displays work too. > > Bon chance, > > Greg >

5 6

adding density maps
by Anindito Sen 22 Nov '10

22 Nov '10

Dear All I was wondering if there is an option to add multiple density maps of the same box and voxel sizes in Chimera. Thanks Andy Dr. Anindito Sen (Ph.D)

2 1

Measure volume of a cavity encased inside a cryo-EM density
by sudheer molugu 19 Nov '10

19 Nov '10

Hi, I was just wondering if chimera can calculate the volume of a central cavity encased inside the cryo-EM density. Thanjk you, Kumar

2 1

Chimera SASA algorithm
by Devin McBride 17 Nov '10

17 Nov '10

Hello, I have been using UCSF Chimera for a few years. I am currently reviewing the SASA algorithms by various molecular modeling software. I was wondering what the error associated with a given SASA calculation is? The algorithm has an error in the calculated SASA, but I was not able to find out what the error is. Thank you very much for your time and help. -- Devin McBride Ph.D. Candidate Department of Bioengineering Bourns Hall A130 University of California, Riverside Phone: (951) 742-3541 Email: dmcbr001(a)student.ucr.edu

2 2

visualization code optimized using GPU shaders ?
by Mathieu Chavent 16 Nov '10

16 Nov '10

Dear Chimera developers, I try to have a brief overview of molecular programs that can use programmable capabilities of new graphic hardwares (i.e. use of shaders): So, I would like to know if Chimera program have dedicated code that use such shaders to visualize fastly surfaces or to add particular lighting effects.. Thank you in advance. Matthieu Chavent.

2 1