- Chimera-users - RBVI Mailing Lists

Re: [Chimera-users] What is the default of ribbon?
by Elaine Meng 20 Aug '16

20 Aug '16

Hi Root, You cannot change this preset, but you can control what is shown “manually," for example hiding all atoms and then displaying residues within 5 angstroms of ligand and 3.2 angstroms of ions with commands: ~disp disp ligand z<5 disp ions z<3.2 To make a more simple one-step action, you can make an “alias” combining several commands, and that could be listed in an Aliases menu. This is sort of like “make your own preset”. For examples, see this previous post: <http://plato.cgl.ucsf.edu/pipermail/chimera-users/2012-February/007230.html> I hope this helps, Elaine On Aug 19, 2016, at 1:03 AM, 郭尚哲 <b02b02049(a)ntu.edu.tw> wrote: > Dear Elaine, > I have another question. How can I change this 3.6 Å criteria, if it is possible? > Root > ________________________________________ > 從: Elaine Meng [meng(a)cgl.ucsf.edu] > 寄件日期: 2016年8月19日上午 12:54 > 至: 郭尚哲 > 副本: chimera-users(a)cgl.ucsf.edu > 主旨: Re: [Chimera-users] What is the default of ribbon? > > Hi Root, > It is described in the “preset” documentation: > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/menu.html#menupresets> > > … specifically, > "Interactive 1 (ribbons) - shows most peptide and nucleic acid chains as ribbons, plus atomic detail (excluding hydrogens on carbon atoms) for residues within 3.6 Å of a ligand residue or metal ion. Atomic detail is also used for chains that are very short.” > > In other words, if the amino acid residue has any atom within 3.6 Å of what Chimera thinks is “ligand” or “ion” the whole sidechain will be shown, except any H atoms attached to C atoms. > > You do not need to search on the net, you can just look at the manual included with your download, using menu: Help… Search Documentation. For example, you could search for “presets” or “ribbon interactive preset”. The information you found is explaining something different: why the backbone atoms are not shown. > > I hope this helps, > Elaine > ---------- > Elaine C. Meng, Ph.D. > UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab > Department of Pharmaceutical Chemistry > University of California, San Francisco > > >> On Aug 17, 2016, at 11:13 PM, 郭尚哲 <b02b02049(a)ntu.edu.tw> wrote: >> >> Hi all, >> I have some pdb files of ligand binding protein structures, and when I check these structures with the ribbon diagram (Presets -> Interactive 1 (ribbons)) with chimera, it not only show the "ribbon" but also the sidechain of some residues. I would like to know why, so I search on the Net. And I just find the site below: >> https://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/ribbonstyle/ribbo… >> It says "By default, when ribbon is shown for a residue, the mainchain atoms of that residue are hidden, except where bonded to other displayed atoms (such as the sidechain)." >> I can't get more imformation, and still don't understand. >> What is the rule chimera follow to show the sidechain of certain residues? >> Thanks, >> Root > >

2 1

segmenting cryoEM maps
by giulia palermo 19 Aug '16

19 Aug '16

Dear all, I am new to chimera and I am working with density maps. I have segmented my cryoEM map successfully. I want now to group some of the segmented regions in a single region and subequently save the obtained map. Is there a way of doing it? Thank you very much Best wishes Giulia Palermo

2 2

Re: [Chimera-users] Add Hydrogens - non standard residue - protonation state
by Elaine Meng 19 Aug '16

19 Aug '16

Hi Subha, This is out of my area, since I don’t know python. (We always recommend sending questions to the chimera-users list, CC’d here, since you are more likely to get a good answer by asking multiple people!) I can only say that as far as I know if it works in the command line, then you should be able to use python to run the same command, as described in this page in the Chimera programmer’s guide: <http://www.rbvi.ucsf.edu/chimera/docs/ProgrammersGuide/basicPrimer.html> Best, Elaine On Aug 19, 2016, at 1:57 PM, Subha Kalyaanamoorthy <kalyaana(a)ualberta.ca> wrote: > Hi Elaine, > > Just another question, > > Is there anything I need to import for using setattr in a python script. I get an error when I use it as a part of script. But, it works fine when I type it on the command-line of Chimera gui. Not sure what I am missing. > > Thanks and Best Regards, > Subha >

2 1

Default contour level in Volume Viewer
by MICHAEL POTEAT 19 Aug '16

19 Aug '16

Hello all, How is the default contour level in the Volume Viewer calculated when you first open up a .mrc file? I've tried the average density, and the root-mean-square of all voxels, but both do not match Volume Viewer's default level. I've tried looking here [ http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/volumeviewer/frame…] for documentation on this, but it does not mention it. Thanks, Mike

2 1

Add Hydrogens - non standard residue - protonation state
by Subha Kalyaanamoorthy 18 Aug '16

18 Aug '16

Hi There, Can anybody please suggest me how to use 'setattr' (or any other function) to assign a protonation state for an atom in a non-standard residue. I have a ligand and I am using a python script to add hydrogens and charge to the ligand molecule using chimera no-gui. I see that chimera adds an extra hydrogen to a nitrogen atom in the ligand and assigns a charge of +1 to the molecule. Removing this hydrogen using GUI is simple but not practical for large set of molecules. So, it would be helpful if somebody suggest me a command-line to set specific protonation states for atoms (in non-standard residue). Thanks and Best Regards, Subha

2 2

splitting and surfaces
by A G Szabo 18 Aug '16

18 Aug '16

I am working on a large multi subunit structure (4CR2). Originally I selected one of the subunits, and received the error message that suggested I should use the split command. Which I did and obviously I must have been successful in splitting the subunits. Each of the subunits is now labelled as being split, i.e. (#0.14) etc. I was successful in showing the surfaces of 4 subunits, and colored them differently. However, when I tried to show the surface of one of the subunits with 437 residues, (several residues cannot be resolved) I received this error message One subunit which I successfully was able to show the surface in the image had 467 residues and also had a large number of residues that were not resolvable. So I am stuck! Your help would be appreciated. AGSzabo

2 5

further
by A G Szabo 18 Aug '16

18 Aug '16

Further to my last message regarding surfaces it would be highly convenient to have the url listed at the bottom of the error message open as a link. Secondly it is not even possible to copy it and paste it into my browser. ags

1 0

What is the default of ribbon?
by 郭尚哲 18 Aug '16

18 Aug '16

Hi all, I have some pdb files of ligand binding protein structures, and when I check these structures with the ribbon diagram (Presets -> Interactive 1 (ribbons)) with chimera, it not only show the "ribbon" but also the sidechain of some residues. I would like to know why, so I search on the Net. And I just find the site below: https://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/ribbonstyle/ribbo… It says "By default, when ribbon is shown for a residue, the mainchain atoms<https://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/ribbonstyle/ribbo…> of that residue are hidden, except where bonded to other displayed atoms (such as the sidechain)." I can't get more imformation, and still don't understand. What is the rule chimera follow to show the sidechain of certain residues? Thanks, Root

2 1

Joining models
by Jie, Jing 16 Aug '16

16 Aug '16

Hi all, Is there a way in chimera to fix the position of one model when creating a peptide bond between two models? I selected 'move atoms on C side' but the N side chain still moves. Thanks in advance! Jing

3 4

Problem
by Kari Boyett 15 Aug '16

15 Aug '16

I have alot of these Chimera Modules on my phone that I didn't authorize and I need to know how to remove them please.

2 1

measure rotation command questions
by Joseph Atherton 15 Aug '16

15 Aug '16

Hi, When I use the command 'measure rotation' I get a matrix in the reply log. 1) The fourth column is 'translation'. At most the translation I see is 5 Angstrom, so how do I get these numbers (see below)? I also have a shift along axis reported, which seems a more reasonable number, but what if the shift is in a a different vector to the axis? 2) I can get depiction of the rotation axis, but can I also get a depiction of the translation vector? Cheers, Joe Position of model2 (#20) relative to model1.pdb (#1) coordinates: Matrix rotation and translation 0.98820614 -0.14982292 -0.03165001 43.44553134 0.14930460 0.98862441 -0.01816347 -23.90940685 0.03401127 0.01322376 0.99933396 -9.65968865 Axis 0.10195507 -0.21328736 0.97165512 Axis point 180.93496764 275.63881775 0.00000000 Rotation angle (degrees) 8.85455905 Shift along axis 0.14318049

2 2

chimera crashing upon opening of trajectory
by Natesh Singh 12 Aug '16

12 Aug '16

Dear Sir/Madam, I am unable to open a trajectory (50 ns and about 25 gb size) in a chimera GUI. I am getting a python crash error after some time of initial message of 'reading PDB...' and then chimera shuts down. Is it the large file size that is causing the python to crash? Looking forward for the guidance. Best regards, Natesh

2 1

Re: [Chimera-users] Selecting specific atoms in MD Movie
by Thomas Faour (x2013gua) 12 Aug '16

12 Aug '16

Hi Elaine, I thought about sending the data but was hoping there was an easy solution to something I was doing wrong... Which there was! Using :52.water worked perfectly. Thanks a ton! Thomas On Aug 12, 2016 14:49, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: Hi Thomas, It's difficult to answer questions like this without the data... I only have one low-confidence guess, which is to try :52.water instead of :52 ...as mentioned in the "subcategories" section of <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/frameatom_spec.html> If that doesn't work, you would have to send us the data (or a smaller sample, if possible). You could send it to just me if you don't want to send to the whole list. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Aug 11, 2016, at 4:46 PM, Thomas Faour (x2013gua) <x2013gua(a)stfx.ca> wrote: > Hello there, > > I study water/ice systems and I have an algorithm which reads my trajectories and tell me if a certain water molecule can be considered "liquid", "hexagonal ice" or "cubic ice". So I can label each molecule at each frame as such. I am hoping to be able to use this data to create a movie where each group is coloured differently, and should a molecule change groups be re-coloured accordingly. > > I attempted this by running a PER-FRAME script which reads my labels from a data file, and colours the molecules. However I ran into a problem, running either of the following commands: > > colour blue,a :52 > select :52 > > in the PER-FRAME script, or even just on the command line during an MD Movie does NOT work for me. This works for a single configuration file, but not during a movie. The command: > > color blue,a @OW > > however does work. I am currently using XTC trajectories, in case that is relevant. > > What might fix my problem? Or is there a better way I could be doing this? > Cheers, > Thomas

1 0

Selecting specific atoms in MD Movie
by Thomas Faour (x2013gua) 12 Aug '16

12 Aug '16

Hello there, I study water/ice systems and I have an algorithm which reads my trajectories and tell me if a certain water molecule can be considered "liquid", "hexagonal ice" or "cubic ice". So I can label each molecule at each frame as such. I am hoping to be able to use this data to create a movie where each group is coloured differently, and should a molecule change groups be re-coloured accordingly. I attempted this by running a PER-FRAME script which reads my labels from a data file, and colours the molecules. However I ran into a problem, running either of the following commands: colour blue,a :52 select :52 in the PER-FRAME script, or even just on the command line during an MD Movie does NOT work for me. This works for a single configuration file, but not during a movie. The command: color blue,a @OW however does work. I am currently using XTC trajectories, in case that is relevant. What might fix my problem? Or is there a better way I could be doing this? Cheers, Thomas

2 1

APBS mobile ion option
by Eita Sasaki 12 Aug '16

12 Aug '16

Hi, I'd like to run APBS command with mobile ions (150 mM NaCl). I tried the following command, but it did not work. apbs molecule #1 ion true _posion 1,0.15,1.16 _negion -1,0.15,1.67 If I typed just "apbs molecule #1" it works (without mobile ions). I am wondering my command was perhaps wrong but don't know the right one. I hope you could help me to solve the problem Thank you in advance. Eita

2 4

(no subject)
by Karel W. F. de Pourcq 09 Aug '16

09 Aug '16

Dear Chimera team: I am a student of a Msc. in Bioinformatics at the Autonomous University of Barcelona. I am using Chimera to prepare visual representations of molecular events, and I write in order to ask if there is a straightforward way in which to: a) Create a sphere of a certain diameter: Yes, I found how to do it already: with the "shape" command. This is solved. b) In an orderly and distributed way, cover that sphere with a number of copies of a molecule chain, anchored over the sphere's surface by one of their ends (and the other end of the molecule protruding towards the outside). I believe I could do it manually for a small system. Is there some kind or automated and more convenient way to do this for a large sphere, linking its surface with hundreds of molecules of -for instance- dodecane? I could not find explicitly a way to do something similar to what I am trying to do. I attach an image of a 2-d representation of something similar to what I would like to represent. The difference is that I would like to cover the surface. [image: Imágenes integradas 1] I thank you a lot in advance for your time. Kind greetings from Barcelona, Spain, Karel De Pourcq

4 4

chimera minimize script
by Bylund, Tatsiana (NIH/NIAID) [F] 09 Aug '16

09 Aug '16

Dear all, I need to minimize a lot of protein complexes and am trying to do it with a script. I have a protein complex structure without Hydrogens, but when they are added in Chimera, it outputs error Non-standard atom names: ASN HA2 (:33.K@HA2) ASN HA3 (:33.K@HA3) Total charge for #0: 32.039 Total charge for #0: 32.039 The following residues had non-integral charges: :33.K 0.039 Correct charges are unknown for 2 non-standard atom names in otherwise standard residues Charges of 0.0 were assigned to the unknown atoms 1 model(s) had non-integral total charge Details in reply log Dock prep finished Error while processing chimera_mini.py: No MMTK name for atom "HA3" in standard residue "ASN" When I delete residue K 33 (which DOES NOT have H in pub file) chimera runs minimization. Would you have any suggestions? Thank you! Kind regards, Tatsiana

3 3

UCSF
by Amali Guruge 05 Aug '16

05 Aug '16

Dear All, What is UCSF referring to? Is it University of California San Francisco ? Thank you.

2 1

Volume and mesh data simultaneously? Coordinate space is different
by Marvin Albert 03 Aug '16

03 Aug '16

Hi all, I process 3d objects and want to visualise them as meshes and volumes simultaneously. However, when I load them into chimera the coordinates of the two are different (meaning they don’t overlap). Is there an obvious reason for this? Would the volume viewer show a .tif file with different coordinates than chimera shows the .wrl mesh? (this tiny cube exemplifies my problem: http://www.filedropper.com/cube_3 <http://www.filedropper.com/cube_3>) Thanks a lot in advance, Marvin

3 5

precalculated void representation as surface
by Michalska, Karolina M. 03 Aug '16

03 Aug '16

Hi, I have a precalculated cavity represented as a grid in the pdb format, where “atoms” are spaced by 0.3 A. What would be the option to visualize this as a surface? I can easily show it as point or spheres, but I cannot display it as surface. I appreciate your help, Karolina

2 6

APBS webservers not working
by Ursula Schulze-Gahmen 02 Aug '16

02 Aug '16

I used to run APBS from within Chimera. But recently, the webservers that are called for the APBS calculations are not working. Do I need to go to the APBS website directly or what is the solution? Ursula -- Ursula Schulze-Gahmen, Ph.D. Project Scientist UC Berkeley, QB3 360 Stanley Hall #3220 Berkeley, CA 94720-3220 (510) 643 9491

2 1

chimera 1.11 question
by Dixon, John 01 Aug '16

01 Aug '16

Hi I was wondering if you could help When I install chimera on my main physical PC I can use function left CTRL and mouse to highlight atoms in green in the graphics interface as below. [cid:image003.jpg@01D1E728.1FE9F730] However when I install chimera on a virtual PC, this function does not work. Any ideas on how to get around this issue? thanks John Dixon Application Integration Team Client Platform Services Information Services Division, UCL Tel: 02076799163 Ext: 09163

3 2

help for make figures
by 陈柳青 30 Jul '16

30 Jul '16

HI How to make the figures in attachment, which highlight part of a structure. Thanks very much for advise. -- Liuqing Chen School of Life Science & Biotechnology Minhang Campus Shanghai Jiao Tong University No. 800 Dongchuan Road Shanghai 200240 P.R. China Tel: +86 21 34207247

2 2

help for make figures
by 陈柳青 30 Jul '16

30 Jul '16

HI How to make the figures in attachment, which highlight part of a structure. Thanks very much for advise. -- Liuqing Chen School of Life Science & Biotechnology Minhang Campus Shanghai Jiao Tong University No. 800 Dongchuan Road Shanghai 200240 P.R. China Tel: +86 21 34207247

1 0

UI suggestions - Save map
by Oliver Clarke 29 Jul '16

29 Jul '16

Hi, minor suggestion for Chimera, related to dealing with large numbers of maps: It would be really helpful if there was a 'Save map' dialog in the 'File...' menu, with similar dropdown menus to select the map one wants to save as for the 'Save PDB' dialog. Doing so via the volume viewer is a bit clunky when there are lots (e.g. 10+) of maps loaded. Even better would be if it included a 'Save relative to map' dropdown, analogous to the 'Save relative to model' drop down in the 'Save PDB' dialog, which would resample the map to be saved on the grid of the selected target map (perhaps warning of the potential for a modest loss of quality). This would be really helpful when one aligns many different conformations of a molecule (e.g. from 3D classification) to a reference subvolume and wants to save the resulting transformed maps. Cheers, Oli.

1 0