- Chimera-users - RBVI Mailing Lists

Re: [Chimera-users] missing chimera-users email
by Eric Pettersen 17 Jul '09

17 Jul '09

I see what happened to the mail now. Cao is not a subscriber to chimera-users so her mail was held up for moderator approval. I'll fix that now... --Eric On Jul 16, 2009, at 5:46 PM, Greg Couch wrote: > So it's not in the archive nor does Tom Goddard have it, so you'll > have to forward it to me :-). > > - Greg

1 0

Re: [Chimera-users] Chimera-users Digest, Vol 75, Issue 17
by Burkhard Heil 15 Jul '09

15 Jul '09

Liebste, hab jetzt auch AB abgehört:-) und warte auf meine gesättigte oder essende Sarah:-) Knutschknutsch! Küsse Dein Burkhard On 14.07.2009, at 21:00, chimera-users-request(a)cgl.ucsf.edu wrote: > Send Chimera-users mailing list submissions to > chimera-users(a)cgl.ucsf.edu > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users > or, via email, send a message with subject or body 'help' to > chimera-users-request(a)cgl.ucsf.edu > > You can reach the person managing the list at > chimera-users-owner(a)cgl.ucsf.edu > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Chimera-users digest..." > > > Today's Topics: > > 1. suggestion/transform molecule coordinates (Dougherty, Matthew T.) > 2. Re: suggestion/transform molecule coordinates (Thomas Goddard) > 3. Re: sequence viewer (Eric Pettersen) > 4. Re: sequence viewer (Elaine Meng) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 13 Jul 2009 15:30:21 -0500 > From: "Dougherty, Matthew T." <matthewd(a)bcm.tmc.edu> > Subject: [Chimera-users] suggestion/transform molecule coordinates > To: <chimera-users(a)cgl.ucsf.edu> > Message-ID: > <B5CA7C88183F884CB316B04DCD343849013465D6(a)BCMEVS13.ad.bcm.edu> > Content-Type: text/plain; charset="iso-8859-1" > > relating to the apply, close & help buttons > > 1)"reset" button > The reset would remove prior transformations > > 2) "apply once" button. > The apply once would function the same as a reset and apply in > sequence. > > 3) display sum of current transformation (Euler & shift) > > > Matthew Dougherty > 713-433-3849 > National Center for Macromolecular Imaging > Baylor College of Medicine/Houston Texas USA > = > = > = > ====================================================================== > = > = > = > ====================================================================== > > >

1 0

Re: [Chimera-users] [chimera-dev] Non-standard residues
by Elaine Meng 15 Jul '09

15 Jul '09

Hi Alex, The calculation requires parameters for all of the atoms present regardless of whether they are frozen during minimization or not. The frozen atoms still exert forces on the movable atoms. Unfortunately there is a hard limitation on which metal ions can be handled. Possible workarounds have been discussed on chimera-users, for example: <http://www.cgl.ucsf.edu/pipermail/chimera-users/2009-July/004066.html> <http://www.cgl.ucsf.edu/pipermail/chimera-users/2009-March/003682.html> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html On Jul 14, 2009, at 4:56 PM, Alex Gawronski wrote: > Hello, > > I used :/!isHet for the "spec" option for "minimize" and I'm still > getting "Unable to find GAFF type for #0:155.A@FE " for 101M. I > thought this would skip the heme, but I guess not. How can I avoid > this error? > > Thanks again! > > Alex >

1 0

dragging a displayed object
by justin oppenheim 15 Jul '09

15 Jul '09

Hello: I am displaying two or more very similar objects, but they are shifted one with respect to another. How can I drag/move/align them on the display to correct for the relative shift? Many thanks, JO

2 1

Some problem with volume coloring
by MAG 14 Jul '09

14 Jul '09

Good day for you, Would be so kind and help me. The problem is I want to color two parts of my volume. So, I have put markers inside of it, color two parts, but now I want to save this colored volume, such that after I would be able to duplicate it and use as a normal volume, but colored. Thank you in advance, Best, Alex

2 1

sequence viewer
by Gatsogiannis, Christos 13 Jul '09

13 Jul '09

Hi all, i ve just installed the latest daily build version and i´ve noticed that the sequence viewer has a new "look". However, i have difficulties to get used to it... Some examples: -when i want to view the sequence of a pdb file containing seven chains, i get seven different pop-up windows (...) showing the sequences corresponding to the seven different chain ID´s.... -Moreover, it isn´t so "easy" anymore to select aminoacids directly in the sequence viewer (e.g. too many colors) and therefore now i´m selecting residues using only the command line.. My colleagues also prefer the older version.. is there a simple way to install the latest chimera version but keep the old version of the sequence viewer? Thanks! -Christos ------------------------------- Christos Gatsogiannis Insitute of Zoology, Dpt. II cryoEM Lab, AG Markl Joh. v. Müllerweg 6 Johannes Gutenberg University Mainz, Germany +49-6131-3923091 ------------------------------- ________________________________________ Von: chimera-users-bounces(a)cgl.ucsf.edu [chimera-users-bounces(a)cgl.ucsf.edu] im Auftrag von chimera-users-request(a)cgl.ucsf.edu [chimera-users-request(a)cgl.ucsf.edu] Gesendet: Mittwoch, 17. Dezember 2008 21:00 An: chimera-users(a)cgl.ucsf.edu Betreff: Chimera-users Digest, Vol 68, Issue 22 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Re: (Thermal ellipsoids) anisotropic temperature factor ellipsoids (Eric Pettersen) 2. Re: (Thermal ellipsoids) anisotropic temperature factor ellipsoids (Eric Pettersen) 3. possibilities to save parts of models (selection)? (Sebastian Kruggel) 4. Re: possibilities to save parts of models (selection)? (Elaine Meng) ---------------------------------------------------------------------- Message: 1 Date: Tue, 16 Dec 2008 14:59:34 -0800 From: Eric Pettersen <pett(a)cgl.ucsf.edu> Subject: Re: [Chimera-users] (Thermal ellipsoids) anisotropic temperature factor ellipsoids To: Tom Goddard <goddard(a)cgl.ucsf.edu> Cc: 'Chimera BB' <chimera-users(a)cgl.ucsf.edu> Message-ID: <9A34751B-6356-4AF4-A8C7-31757E5FFBF1(a)cgl.ucsf.edu> Content-Type: text/plain; charset="us-ascii" On Dec 12, 2008, at 10:40 AM, Tom Goddard wrote: > Hi David, > > Ok I see now, it's a matter of choosing the size of each ellipsoid to > have a 50% chance of finding the atom in that volume. This > shouldn't be > too hard but I'll let Eric tackle it if he has time. Hi David, This is one of those things that I'll endeavor to get into Chimera's production version of thermal ellipsoids, but that I can't spare the time for until then. My guess is that the eigenvectors/values of the U matrix are at the 50% probability level, but verifying that would require some research. If you do look into and find that that's not the case, just change the setting of the 'scale' variable of the start of the script to change the ellipsoid sizes to whatever size encloses 50%. --Eric

4 4

suggestion/transform molecule coordinates
by Dougherty, Matthew T. 13 Jul '09

13 Jul '09

relating to the apply, close & help buttons 1)"reset" button The reset would remove prior transformations 2) "apply once" button. The apply once would function the same as a reset and apply in sequence. 3) display sum of current transformation (Euler & shift) Matthew Dougherty 713-433-3849 National Center for Macromolecular Imaging Baylor College of Medicine/Houston Texas USA ========================================================================= =========================================================================

2 1

Faster raytracing
by "Bernhard Pätzold" 09 Jul '09

09 Jul '09

Hello I love Chimera and the only little bummer to me are the long rendering times for raytraced movies. I managed to get the PovRay version 3.7 which uses multiple cores running on our server. However now I am stuck and here comes my question. Is there away how I can get Chimera to use the newer Version of PovRay? Or can I somehow change my script so that I get only the .pov and .ini files for all the frames while the actual raytracing is skipped and I can do it subsequently with the newer Version? Currently the whole things has to happen on a windows system, but I hope that I'll get my ubuntu version soon up and running again, so hints and advices for both options are welcome. Thanks a lot in advance Berni -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

3 3

no bug reports
by Eric Pettersen 09 Jul '09

09 Jul '09

Since mail to chimera-bugs eventually gets delivered to crick and crick is down, we won't be receiving any bug reports until crick comes up. --Eric

1 0

thermal ellipsoids
by Michael K. Gilson 08 Jul '09

08 Jul '09

Hi, Chimera and PyMol are showing very different thermal ellipsoid orientations for the same PDB file, and I have reason to believe that the PyMol display is the right one. Here are the first two lines of the PDB file I am reading in: Atom 1 O1 CUC 1 3.345 1.613 0.172 ANISOU 1 O1 CUC 1 619 156 528 150 43 -6 ATOM 2 O2 CUC 1 -1.699 0.125 2.792 ANISOU 2 O2 CUC 1 497 355 848 128 -68 204 I would appreciate help with this because Chimera appears to provide more detailed control of the coloring of the ellipsoids than PyMol does. I'll be happy to provide screenshots or other information. Regards, Mike

6 11

Model translation
by David Chenoweth 08 Jul '09

08 Jul '09

Hi, Can anyone tell me the easiest way to translate an entire model by a defined amount (angstroms) in a defined direction. I have a slice of a nanotube and I would like to open it several times, translate each section, and make bonds between the translated sections in order to create a longer nanotube and then save the new coordinates as a new model. Thanks, Dave

2 1

Re: [Chimera-users] Display Molecule Name
by cdlau＠ucsd.edu 08 Jul '09

08 Jul '09

Hi, Thanks for the response. This would not work for my case because I am writing a plugin for ViewDock for use with a Tiled Wall Display. I was hoping there was a setting that was available to show the molecule name (if a setting does exist I can initiate it with runCommand). Does anyone know if this is possible? Thanks, Chris On Thu, 2 Jul 2009, cdlau(a)ucsd.edu wrote: Hi, I was wondering if there was a way to display the molecule name that is being shown in chimera. A simple display such as "molecule #0.10" below the rendered molecule would be great. Thanks for your help, Chris Just place the mouse over the item you want to know more about and a popup balloon will tell you about it. The text starts with the model number, e.g., #0.10, and may or may not have additional information, i.e., for an atom it includes the residue name and sequence number and the atom name. - Greg

5 7

Thermal ellipsoids
by Michael Day 07 Jul '09

07 Jul '09

Hi, I see thermal ellipsoid rendering was just enabled. This is another point (in a long list of points) in favor of using Chimera. Is there a plan to be able to display ellipsoid axis or octants as in ortep type renderings. This would be extremely useful in small molecule work. I've been using Chimera as an alternate when reporting structures in my lab and it has been very well received. The first question asked when I distributed a report today was about the axis and/or octants. Great work. Keep it up! Cheers, Mike <<< ------------------------------------------------------------------------> >> Dr. Michael W. Day Director - X-ray Crystallography Lab & Molecular Observatory California Institute of Technology Mail Code 139-74 Pasadena, CA 91125 <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< Beckman Institute, Room 116 Phone: (626) 395-2734 Fax: (626) 449-4159 e-mail: mikeday(a)caltech.edu <<< ------------------------------------------------------------------------> >>

2 1

Display of a vector in Chimera
by Charles Letner, Ph.D. 07 Jul '09

07 Jul '09

Hello, Is there a way to display a vector between two sets of coordinates in Chimera? If the approach is to write a python, any chance I could get a nudge in the right direction on chimera commands to work with? I've written a minimal amount of python code but not related to Chimera. Cheers, Chuck Charles Letner, Ph.D. Alpharetta, GA 30004 Email: chuck(a)theletners.com

2 1

Re: [Chimera-users] minmize small molecule
by Elaine Meng 06 Jul '09

06 Jul '09

Hello, It looks like the Cu is part of the small molecule. Sorry, in my first reply I thought it was just a separate monatomic ion (not covalently bonded to anything) that happened to be near the small molecule, such as in the binding site of a protein. Covalent organometallic compounds cannot be minimized in Chimera. Chimera uses Antechamber/GAFF to assign parameters to nonstandard residues such as small molecules, and this process is only meant to handle organic molecules made of C, N, O, H, S, P, F, Cl, Br and I. To minimize this type of compound, you would need to use some other program, sorry. Elaine On Jul 6, 2009, at 12:48 PM, Venkataraman Kabaleeswaran wrote: > changed the atom type, but got the following error message? > > > Running ANTECHAMBER command: /net/earth/disk3/vk/pgm/chimera/bin/ > antechamber/exe/antechamber -i /tmp/tmpXaquvp/ante.in.mol2 -fi mol2 - > o /tmp/tmpXaquvp/ante.out.mol2 -fo mol2 -c gas -nc -1 -df 0 -j 5 -s 2 > (LIG) Running: "/net/earth/disk3/vk/pgm/chimera/bin/antechamber"/exe/ > bondtype -i ANTECHAMBER_BOND_TYPE.AC0 -o ANTECHAMBER_BOND_TYPE.AC -f > ac -j part > (LIG) > (LIG) For atom[10]:Mg, the best APS is not zero, exit > (LIG) Running: "/net/earth/disk3/vk/pgm/chimera/bin/antechamber"/exe/ > atomtype -i ANTECHAMBER_AC.AC0 -o ANTECHAMBER_AC.AC -p gaff > (LIG) > (LIG) Running: "/net/earth/disk3/vk/pgm/chimera/bin/antechamber"/exe/ > atomtype -i ANTECHAMBER_GAS.AC -o ANTECHAMBER_GAS_AT.AC -d "/net/ > earth/disk3/vk/pgm/chimera/bin/antechamber"/dat/antechamber/ > ATOMTYPE_GAS.DEF > (LIG) > (LIG) > (LIG) No Gasteiger parameter for atom[9]:Mg :DU, exit(0) > Failure running ANTECHAMBER for residue LIG > Check reply log for details > > Kabaleeswaran Venkataraman > > -------------------------------------------------------------- > Arise, Awake and stop not until goal is Reached > - Swami Vivekananda > -------------------------------------------------------------- > > > --- On Mon, 7/6/09, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > From: Elaine Meng <meng(a)cgl.ucsf.edu> > Subject: Re: [Chimera-users] minmize small molecule > To: "Venkataraman Kabaleeswaran" <vkabs(a)yahoo.com> > Cc: chimera-users(a)cgl.ucsf.edu > Date: Monday, July 6, 2009, 8:07 PM > > Hello, > The "Minimize Structure" tool in Chimera uses MMTK. In general, it > works on (polyatomic) nonstandard residues because Antechamber is > can generate parameters for those, but unfortunately there is a hard > limitation on the types of monatomic atoms that are handled. > > From the Minimize Structure documentation: > "Only the ions in ff99 are handled: Na+, K+, Rb+, Cs+, Mg2+, Ca2+, > Zn2+, and Cl–" > <http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/minimize/minimize.… > > > > You could change the Cu to one of those, say Mg, by editing your > structure input file or by using Build Structure (Modify Atom > section). If you are concerned about the effect on the nearby > atoms, you could make sure to freeze that part of the structure so > that it is not allowed to move during minimization. > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab > Department of Pharmaceutical Chemistry > University of California, San Francisco > http://www.cgl.ucsf.edu/home/meng/index.html > > > On Jul 6, 2009, at 10:35 AM, Venkataraman Kabaleeswaran wrote: > > > > > Hi > > I wanted to optimize the geometry of small molecule by > minimization for docking. > > > > I have not seen any option in chimera but even I did tried with > the small molecule I have as nonstandard aminoacid, but it give me > error mmtrk could not Cu atom type. > > > > Is it any small script or through chimera I could able to optimize > the small molecule? > > thanks > > > > Kabaleeswaran Venkataraman > >

1 0

building a backbone model from deposited Calpha coordinates
by Mark Girvin 06 Jul '09

06 Jul '09

I'm sure that this has been asked before, but with limited web bandwidth while traveling, and not finding it in the downloaded help, will ask again anyway (pls feel free to ignore) -- what would you suggest as the best way to coax a ribbon diagram out of deposited Calpha coordinates? Thanks either way, - Mark (further apologies if this turns into a double posting - seemed to bounce the first try). -- Mark Girvin Biochemistry Department Albert Einstein College of Medicine 1300 Morris Park Ave. Bronx, NY 10461 http://www.bioc.aecom.yu.edu/labs/girvlab

2 1

minmize small molecule
by Venkataraman Kabaleeswaran 06 Jul '09

06 Jul '09

Hi I wanted to optimize the geometry of small molecule by minimization for docking. I have not seen any option in chimera but even I did tried with the small molecule I have as nonstandard aminoacid, but it give me error mmtrk could not Cu atom type. Is it any small script or through chimera I could able to optimize the small molecule? thanks Kabaleeswaran Venkataraman -------------------------------------------------------------- Arise, Awake and stop not until goal is Reached - Swami Vivekananda --------------------------------------------------------------

2 1

[Chimera-Users] Display molecule name
by cdlau＠ucsd.edu 02 Jul '09

02 Jul '09

Hi, I was wondering if there was a way to display the molecule name that is being shown in chimera. A simple display such as "molecule #0.10" below the rendered molecule would be great. Thanks for your help, Chris

2 1

chimera error
by Bala subramanian 02 Jul '09

02 Jul '09

Friends, I installed chimera in fedora10, installation was fine but starting chimera throws me the following error. Trying chimera version 1.3 Traceback (most recent call last): File "/usr/local/chimera/share/__main__.py", line 65, in <module> value = chimeraInit.init(sys.argv) File "/usr/local/chimera/share/chimeraInit.py", line 361, in init tkgui.initializeGUI(exitonquit, debug_opengl) File "CHIMERA/share/chimera/tkgui.py", line 2525, in initializeGUI File "/usr/local/chimera/lib/python2.5/site-packages/PIL/__init__.py", line 321, in checkConfig File "/usr/local/chimera/lib/python2.5/site-packages/PIL/__init__.py", line 297, in checkForChange File "/usr/local/chimera/lib/python2.5/site-packages/PIL/__init__.py", line 52, in readGfxInfo KeyError: 'Pbuffer'

2 3

Normal recalculation
by Damien Larivière 02 Jul '09

02 Jul '09

Dear Chimera team, I have open in Chimera a VRML file containing multiple copies of the FtsZ protein. The VRML file does not contain the smooth groups so that, at display, triangles appear at the surface of the proteins as shown in the attached image. I would like to get the surface smooth but not by increasing the number of triangles. Is there a way in Chimera to recalculate the normals as it can be done in 3DSMax for instance? My best regards, Damien

3 2

standalone programs for processing volume data
by Michele Lunelli 30 Jun '09

30 Jun '09

Dear all, I want to use the program combine.py to subtract two delphi potential maps. I have the most recent stable version of Chimera installed in /usr/local/chimera. Following the documentation, I set the PYTHONPATH variable with setenv PYTHONPATH /usr/local/chimera/share then I try to run the program with /usr/local/chimera/bin/python2.5 /usr/local/chimera/share/VolumeProcessing/combine.py but the result is always: Traceback (most recent call last): File "/usr/local/chimera/share/VolumeProcessing/combine.py", line 12, in <module> from VolumeData import Grid_Data File "/usr/local/chimera/lib/python2.5/site-packages/PIL/__init__.py", line 10, in <module> # File "CHIMERA/share/VolumeData/opendialog.py", line 70, in <module> File "/usr/local/chimera/lib/python2.5/site-packages/PIL/__init__.py", line 72, in <module> File "/usr/local/chimera/lib/python2.5/site-packages/PIL/__init__.py", line 15, in <module> ImportError: No module named _chimera How can I overcome this problem? Thanks in advance, Michele

2 1

modeldisp
by cdlau＠ucsd.edu 29 Jun '09

29 Jun '09

Hi, I am currently using the modeldisp command on the command line to hide and view various molecules within a single mol2 file. I was wondering how I would be able to access how many total molecules there were in a single mol2 file. For example, if the mol2 file is loaded into model 0, I would be using modeldisp #0.$i etc in a large loop where $i is changing. What command can I use to return a value for the total number of molecules in the mol2 file so I can have this be the upper limit of $i? Thanks for your help, Chris

2 1

GROMACS trajectory
by Dave Hassan 29 Jun '09

29 Jun '09

Hi All, I'm trying to generate an MD move from a gromacs trajectory. I used tools > MD/Ensemble Analysis > MD movie in the toolbar. I then get the following error message: VERSION 4.0.5 using floats version 58 generation 17 9975 atoms DICKERSON DODECAMER in water 17 atoms 456 residues <type 'exceptions.IndexError'> Exception in Tk callback Function: <function command at 0x10ecc870> (type: <type 'function'>) Args: () Traceback (innermost last): File "/Applications/Chimera.app/Contents/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/Pmw/Pmw_1_3/lib/PmwBase.py", line 1747, in __call__ return apply(self.func, args) File "/Applications/Chimera.app/Contents/Resources/share/chimera/baseDialog.py", line 244, in command getattr(s, buttonFuncName(txt))() File "/Applications/Chimera.app/Contents/Resources/share/chimera/baseDialog.py", line 458, in OK self.Apply() File "/Applications/Chimera.app/Contents/Resources/share/Trajectory/EnsembleLoader.py", line 92, in Apply self.callback) File "/Applications/Chimera.app/Contents/Resources/share/Trajectory/formats/Gromacs/__init__.py", line 56, in loadEnsemble startFrame, endFrame, callback) File "/Applications/Chimera.app/Contents/Resources/share/Trajectory/formats/Gromacs/__init__.py", line 67, in loadEnsemble ensemble = Gromacs(topology, trajectory, startFrame, endFrame) File "/Applications/Chimera.app/Contents/Resources/share/Trajectory/formats/Gromacs/Gromacs.py", line 25, in __init__ self.topology = TprTopology(topology) File "/Applications/Chimera.app/Contents/Resources/share/Trajectory/formats/Gromacs/Gromacs.py", line 68, in __init__ self._readTopology(version) File "/Applications/Chimera.app/Contents/Resources/share/Trajectory/formats/Gromacs/Gromacs.py", line 181, in _readTopology for i in range(numResidues)] <type 'exceptions.IndexError'>: list index out of range attached are the .trr and .tpr I used. Any help would be greatly appreciated. Thanks, Dave Hassan

3 2

where is 'glossy'
by Boaz Shaanan 25 Jun '09

25 Jun '09

Hi, I don't see 'glossy' in the Lighting panel (Tools / Viewing Controls / Lighting) that Tom mentioned (I'm using the latest production release, XP). Is this a recent development or what am I missing ? Cheers, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 ; Fax: 646-1710 Skype: boaz.shaanan‎

2 2

Sending commands via terminal
by cdlau＠ucsd.edu 25 Jun '09

25 Jun '09

Hi, I was wondering if there was a simple way to send commands (such as "open 1zik" or "preset apply int 2" ) to an already running instance of chimera. I want to be able to send this command using 1 line of command. This means that "--start ReadStdin" would not work because it allows commands to be sent indefinitely. Potentially I could write the commands in a python script and use the --send command, however I would like to avoid this if I just want to send a single command to chimera. Thanks for your help, Chris Lau

2 1

high quality pictures for publication
by Fabian Glaser 25 Jun '09

25 Jun '09

Hi all, I am trying to produce high quality figures for publication with chimera, and despite I am working some time with it, I am not quite satisfied with the result I get. I don't know if I can send figures to this list, just as example I send these two. They are fine, but they are not gorgeus as I would like. I don't know they are produced with and without the pov-ray in linux, with 300 dpi, etc. Could somebody try to help me how to improve them? Thanks a lot in advance, Fabian -- Fabian Glaser, PhD Bioinformatics Knowledge Unit, The Lorry I. Lokey Interdisciplinary Center for Life Sciences and Engineering Technion - Israel Institute of Technology Haifa 32000, ISRAEL Web: http://bku.technion.ac.il Email: fglaser(a)tx.technion.ac.il Tel: +972-(0)4-8293701 Cel: +972-(0)54-4772396

3 4

Re: [Chimera-users] Surface Creation
by Eric Pettersen 23 Jun '09

23 Jun '09

On Jun 23, 2009, at 2:25 PM, Thiruvarangan Ramaraj wrote: > Hi, > > I tried to create two surfaces, one for the Antibody and one for the > Antigen for an Antibody-Antigen complex (1A14.pdb). I am able to > create two surfaces as two models in one session. But when I try to > save this session it gives me an warning > "Cannot save surfaces without associated structure. > Surface will not be saved." This happens when you close the structure that a surface is based on. Sessions don't store vertex/triangle information for surfaces (which would be voluminous) but instead just the parameters that were used to generate the surface -- and the surface is regenerated when the session is restored. But if the underlying structure is gone then that won't work. > Then when I try to open the saved session there is only surface that > I could see. > > Is there any way that I could have both surfaces saved in one session. > > Any help would be greatly appreciated. Well, obviously one approach is to not close the underlying structure. FYI, you can get separate surfaces on the antigen/antibody without using multiple copies of the structure. You need to get the antigen and antibody into separate "surface categories" (as described here: http://www.cgl.ucsf.edu/chimera/current/docs/UsersGuide/midas/msms.html ). Here is a sequence of commands (Favorites->Command Line) that gets the antigen (chain N) into its own surface category named "antigen" and then surfaces both the antigen and antibody: surfcat antigen :.n; surf antigen; surf --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

Saving image and rendering
by Ibrahim Moustafa 23 Jun '09

23 Jun '09

Dear Chimera team, Recently, I have some trouble saving images with POV-RAY option ³true². The process of rendering is too slow (both on the mac and windows version). To give the feeling of how slow: rendering an image with 1700 lines takes 7 hrs (with quality 9 in pov-ray options) and 2 hrs (quality 5). I used to get the images rendered much faster than that (with older versions; however, I¹m not exactly sure of when I started to see such a slow rendering behavior). There is another related problem but only with the windows version: If I want to save an image, with depth cue, using the fast mode (POV-RAY false), the image output lacks any depth used in the model, with poor quality and darker than it should be. Somehow, the camera orientation is messed. In addition, the depth cue will be no longer available for the rest of the session (I have to restart over again). To get the depth cue I want, I need to turn the POV-RAY option ³true²....but then too slow to create a good figure. I¹d appreciate any comment or explanation from Chimera people; and what is the best way to overcome this problem? P.S. I have the PPC version for the MAC running OSX 10.4; the PC running Windows XP. Many thanks in advance for your help. Ibrahim -- Ibrahim M. Moustafa, Ph.D. Biochemistry and Molecular Biology Dept. 201 Althouse Lab., University Park, Pennsylvania State University PA 16802 Tel. (814) 863-8703 Fax (814) 865-7927

4 5

New surface coloring command
by Thomas Goddard 22 Jun '09

22 Jun '09

I added a Chimera command "scolor" that can color surfaces radially or according to volume data values such as electrostatic potential. This command is the equivalent of the Surface Color dialog. A few examples: scolor #0 geometry cylindrical colors the surface by distance from a cylinder axis (default z-axis) with default coloring red-white-blue ranging from minimum to maximum surface radius. scolor #0 geom radial cmap 100,gray:150,blue:200,purple colors radially with colors gray,blue,purple at radii of 100,150,200. scolor #0 volume #1 cmap -10,red:0,white:10,blue colors surface #0 using volume data #1 with colors red,white,blue for volume data values -10,0,10. Here's a summary of the full command syntax. Detailed documentation will be available in the manual before the next Chimera release. scolor <surfaceSpec> [volume <vspec>] [gradient <vspec>] [geometry radial|cylindrical|height] [color <color>] [center <x,y,z>|<atomspec>] [axis x|y|z|<x,y,z>|<atomspec,atomspec>] [coordinateSystem <modelid>] [cmap <v,color>:<v,color>:...|rainbow|gray|redblue|cyanmaroon] [cmapRange <min,max>|full] [reverseColors true|false] [colorOutsideVolume <color>] [autoUpdate true|false] [capOnly true|false] [perPixel true|false] Tom

1 0

Getting Delphi
by Yasser Almeida Hernandez 22 Jun '09

22 Jun '09

Hi all... Where can i download the Delphi executable to run in Chimera...? Thanks ---------------------------------------------------------------- Correo FENHI

2 1

Electrostatics
by Gawronski, Alexander 20 Jun '09

20 Jun '09

Hello, I'm a student at Carleton University and I need to create meshes with electrostatic coloring for all the proteins in the pdb. I need a way of automating this process with scripts but I can't figure out how. Is this possible to do this through command line? How do I call chimera commands from a script? Any help would be greatly appreciated! Thanks, Alex Gawronski

4 3

Re: [Chimera-users] 3D mouse - connexion
by Nils Becker 18 Jun '09

18 Jun '09

Hi Thomas, I'm also using it (recently, on a daily basis, on Mac OS X). It works very nicely, and it's cheap. Also, try the keyboard shortcuts na, nz etc... cheers, Nils

1 0

3D mouse - connexion
by Thomas C. Marlovits 18 Jun '09

18 Jun '09

Hi, the Chimera documentation indicates that the 3D mouse from Connexion (Space navigator) is supported. I have just asked the company, but they didn't know anything about Chimera. I am wondering, whether you have some good experience using it, or whether you have an alternative mouse model that would work nicely together with Chimera. Tx -Thomas Here is the link at your documentation site: > http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/mouse.html#otherinput ------------------------------------------------------------------------------- Thomas C. Marlovits, PhD, M.A.S. Research Group Leader IMP-IMBA Research Center - Research Institute of Molecular Pathology (IMP) - Institute of Molecular Biotechnology, Austrian Academy of Sciences (IMBA) Dr. Bohr-Gasse 3 Room IMBA/6.02 A-1030 Vienna Austria, Europe fone: (++43-1) 79044-4630 fax: (++43-1) 79044-4401 email: marlovits(a)imp.univie.ac.at

3 2

controling multiscale models from command script
by Marhoefer, R (Richard) 18 Jun '09

18 Jun '09

Dear Chimera Users, for the production of a movie file I like to control some attributes of a multiscale model e.g. the style and the surface transparency through a Chimera command file. Unfortunately I couldn't find many commands allowing to do so in the documentation. How could that be done? Kind regards, Richard Dr. Richard Marhoefer Senior Scientist BioChemInformatics Intervet Innovation GmbH Zur Propstei 55270 Schwabenheim, Germany E-Mail: richard.marhoefer(a)sp.intervet.com Phone: +49 (6130) 948 204 Fax: +49 (6130) 948 517 Mobile: +49 175 723 081 4 Home http://www.intervet.com Sitz der Gesellschaft: Schwabenheim Amtsgericht Mainz, HRB 23 166 Geschäftsführer: Dr. Peter Schmid -------------------------------------- This message and any attachments are solely for the intended recipient. If you are not the intended recipient, disclosure, copying, use or distribution of the information included in this message is prohibited -- please immediately and permanently delete. --------------------------------------

3 2

Minimize and solvate with a zinc ion
by Dr. Jean-Didier Maréchal 12 Jun '09

12 Jun '09

Dear all, I want to solvate then minimize (few steps) a structure with a zinc (Zn2+) ion. >From what I saw in the manual, zinc parameters are available in the actual version of the amber force field in chimera. However, I am stuck with troubles. When I solvate I have the following message: Could not determine charges for pre-existing solvent from added solvent for: Zn Zn What do I do wrong? All the best, JD *************************************************** Dr. Jean-Didier Maréchal Lecturer Computational Biotechnological Chemistry @ Transmet Unitat de Química Física Departament de Química Universitat Autònoma de Barcelona Edifici C.n. 08193 Cerdanyola (Barcelona) Tel: +34.935814936 e-mail: JeanDidier.Marechal(a)uab.es

2 1

Morphing Code Request!
by Eric J. Choi 11 Jun '09

11 Jun '09

Hello, chimera-users, Hi, my name is Eric Choi and currently I am interning at the Ren Lab at mission bay for Dr. Ren. For one of my assignments, I was to make a video of a conformation change of PPAR-GAMMA, from open to closed structure with the addition of a ligand. Upon trying to make this happen, I realized that I need the morphing python code(I believe it is) to be able to complete this step. This is what the movie making tutorial told me in the part "Ligand Flying into Unbound Conformation". If I could get the command to make the morph(python code) that would be great. Thank you! -Eric Choi

2 1

map saving
by Jean-Paul Armache 09 Jun '09

09 Jun '09

hello, i would like to ask you a question concerning map manipulations. sometimes i need to manually fit a map into another map, but when saving the map in the new position, it doesn't retain the coordinates. it simply overlays with the original, unmoved maps. is there something i need to do in order to save it in the new position afore hand ? best regards, jean-paul armache

2 1

movie making
by Schulz-Gasch, Tanja 09 Jun '09

09 Jun '09

Hi there, I used Chimera so far only for making pictures. Now I am doing the first movie steps. I want to combine features like hide, show, rock,... with the MD Movie module to show a morph between different protein conformations. How can this be done? The movie should start with the display part (using hide, show, rock,...) followed by the morphing. However, when using the MD movie module the morph starts at frame 1. Thanks, Tanja __________________________________________ Dr. Tanja Schulz-Gasch F. Hoffmann-La Roche Ltd Pharmaceuticals Division PRCBLM Bldg. 92/2.10D CH-4070 Basel Switzerland Tel. +41(0)61 68 88309 Fax. +41(0)61 68 86459 http://compchem.bas.roche.com:8080/schulzt2/PICS_DB/index.html <http://compchem.bas.roche.com:8080/schulzt2/PICS_DB/index.html> Email: tanja.schulz-gasch(a)roche.com <mailto:tanja.schulz-gasch@roche.com> "The information transmitted in this message is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you receive this message in error, please contact the sender and delete the material from any computer."

3 4

loading chimera
by Bala subramanian 08 Jun '09

08 Jun '09

Friends, I installed chimera 1.4 ( build 27677) build in Fedora 10. The installation was successful but when i run chimera, chimera opens with the following message. ERROR: ld.so: object 'libGL.so' from LD_PRELOAD cannot be preloaded: ignored. ERROR: ld.so: object 'libGL.so' from LD_PRELOAD cannot be preloaded: ignored. In addition, when i try to capture a high resolution image (300 dpi), chimera closed itself with following message. X Error of failed request: GLXBadPbuffer Major opcode of failed request: 143 (GLX) Minor opcode of failed request: 28 (X_GLXDestroyPbuffer) Serial number of failed request: 75435 Current serial number in output stream: 75437 Locking assertion failure. Backtrace: #0 /usr/lib/libxcb-xlib.so.0 [0x19e767] #1 /usr/lib/libxcb-xlib.so.0(xcb_xlib_lock+0x2e) [0x19e90e] #2 /usr/lib/libX11.so.6 [0xb690e9] #3 /usr/lib/nvidia/libGL.so.1 [0x6536ffd] Kindly write me what is going wrong. Thanks, Bala

2 1

Segementation Fault
by Kshatresh Dutta Dubey 08 Jun '09

08 Jun '09

Respected Sir, I am using chimera since five months. It was running without any error. But today when i am starting chimera it is giving error like segmentation fault. Kindely help me for this problem. Thanks in advance. Kshatresh Dutta dubey

2 1

Displaying surface residues...
by Yasser Almeida Hernandez 05 Jun '09

05 Jun '09

Hi all... I want to know if its possible display surface residues via python script. The idea is import the chimera module inside the script, and it receive (the script), the pdb file to analyze. The script is to run in a classical bash terminal... Thanks.. ---------------------------------------------------------------- Correo FENHI

3 2

chimera on GM945
by Dmytro Kovalskyy 04 Jun '09

04 Jun '09

Hi there, I experience porblems with chimera running on Lenovo X60t in Linux. graphics: intel GM945 I have two installations on the notebook: WinXP and Linux (ALT Linux 4.1.1). Chimera's benchmark under Windows returns preety nice values (see http://socrates2.cgl.ucsf.edu/trac/chimera/wiki/benchmarks, pre-pre last line, Lenovo ThinkPad X60 Tablet 6363WDP). However under linux I can not get even something reasonable to post Surf - 1 Mesh - 26 Contouring 149 Solid 1 Recoloring 5 Is it natural or due to some bugs in Linux drivers/X/kernel? Thanks in advance Dima -- ----------------------------------------------------- Dmytro Kovalskyy, PhD D.Kovalskyy(a)enamine.net Molecular Modelling Group Leader tel.: +38 044 537 32 18 Enamine ltd. fax : +38 044 537 32 53 23, Matrosova str. 01103 Kiev, Ukraine

3 2

Residues that interact with active site
by Abeer Shokeer 03 Jun '09

03 Jun '09

Hello I have a model structure of my protein and I would like to determine which residues that could take part in active site. Can I do that with Chimera? Thanks for your help Abeer

2 1

Deleting parts of secondary structures
by Anindito Sen 03 Jun '09

03 Jun '09

Dear All I have a Chimera session in which I have 6 sets of PDB files (ribbon representation) showing variability in the structures. However I wish to display only few of the subunits. Questions are: 1. How do I delete undesired subunits from all the chains on the command line 2. How do I select particular residues from specific chains (not all the 6).. Thanks Andy Dr. Anindito Sen (Ph.D) Research Associate , Dept. of Biochemistry and Molecular Genetics University of Virginia Box 800733 Charlottesville, VA 22908

2 1

ribbon transparency
by hsosa＠aecom.yu.edu 02 Jun '09

02 Jun '09

Hi, Is there a command to control the transparency of a ribbon representation or the whole model ?. I'm trying to fade in an out a molecule (in ribbon + wire atom representation) in movie. Thanks Hernando -- ----------------------------------- Hernando Sosa Dept. of Physiology and Biophysics Albert Einstein College of Medicine 1300 Morris Park Av. Bronx NY 10461 phone (718) 430-3456 FAX (718) 430-8819 email hsosa(a)aecom.yu.edu -----------------------------------

3 3

Python -send command and IDLE
by cdlau＠ucsd.edu 29 May '09

29 May '09

Hi, I have 2 questions: 1. Is it possible to use send python scripts (with arguments) to an already running Chimera instance? I know that it is possible to use to use the --send feature, however I wasn't able to send argument in with my python script (http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/options.html) I want to be able to pass arguments to a already running instance of chimera similar to the --script feature (but this feature forces a new instance of chimera to open). 2. Along the same lines as the first question, is it possible to use terminal and python commands to manipulate color, rotation, etc. in place of using the IDLE? Currently I am working on a project to that requires communicating with a computer running Chimera through "ssh"ing into the computer. I want to be able to use terminal commands to do basic manipulations of the molecules from the other machine. Thanks for all your help in advanced, Chris

3 2

Re: [Chimera-users] Identifying surface residues
by Elaine Meng 29 May '09

29 May '09

On May 29, 2009, at 11:34 AM, Soumya Ghosh (Systembiologie) wrote: > Dear Dr. Elaine Meng, > Thanks a lot for your kind help.Your suggestions helped me a lot. I > tried to ask you another question. If I want to see the > Vanderwaal's interaction between the two molecules, is it also > possible with this software? Can you kindly suggest me how I should > proceed further. Also if I want to see different type of bondings > like intramolecular / intermolecular: covalent or ionic or any > sorts is it possible to see with this CHIMERA. > Eagerly waiting for your kind reply, > Thanks with regards, > Soumya Dear Soumya, It is better to send Chimera questions to chimera-users(a)cgl.ucsf.edu instead of to me directly, unless you are including private data. You can use Chimera to show all kinds of interactions, but it may be necessary to take a little time to become familiar with the tools and with Chimera in general. You can use "Help... Search Documentation" to look for topics such as "find interactions". See the tools "FindHBond" (equivalent command "findhbond") and "Find Contacts/Clashes." Both tools are under "Tools... Structure Analysis" in the menu. You can click the "Help" button on each tool to see its manual page. Both tools provide ways to control whether you are looking at intermolecular or intramolecular interactions. These tools are also used in the Structure Analysis and Comparison tutorial: <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/ squalene.html> Of course, covalent bonds are shown as connections in the graphics window. Metal coordination bonds are shown with dashed pseudobonds. FindHBond identifies hydrogen bonds, which could include both polar and charged groups. To only find salt bridges (H-bonds between charged groups), you could either get the total results and filter them yourself, or you can select only charged groups beforehand and then tell FindHBond to only use the selected atoms. More detailed instructions can be found in this previous post: <http://www.cgl.ucsf.edu/pipermail/chimera-users/2009-February/ 003602.html> Find Contacts/Clashes finds contacts of all kinds. To only find some subset of those, you could either filter the output, or limit the input, similar to the situation for FindHBond described above. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

Supersample
by hsosa＠aecom.yu.edu 27 May '09

27 May '09

When using using supersample > 1 to record a movie the movies are not saved correctly (black or random color images) In the command script below the saved movies are OK if the option supersample 3 is eliminated and wrong if included. reset p1 movie record supersample 3 reset p2 reset p8 10 movie stop movie encode output test2.avi mformat avi I'm I doing something wrong ?. I'm running the daily build version of Chimera (May 25). Thanks Hernando -- ----------------------------------- Hernando Sosa Dept. of Physiology and Biophysics Albert Einstein College of Medicine 1300 Morris Park Av. Bronx NY 10461 phone (718) 430-3456 FAX (718) 430-8819 email hsosa(a)aecom.yu.edu -----------------------------------

4 7

Request for advice on Protein Structure Alignment
by Elaine Meng 27 May '09

27 May '09

On May 26, 2009, at 8:46 AM, Madhura Rale wrote: > Dear Dr. Meng, > I am a post-doctoral researcher working in the the Lab of Prof. W. > D. Fessner, Technical University of Darmstadt, Germany. We work in > the area of Biocatalysis and I am an organic chemist by training. > > We are currently looking for an online software / tool to compare > the active sites of two proteins whose structures are already known. > Our work focuses mainly on the utility of these protein catalysts > for chemoenzymatic syntheses. > > My query is that, if the structures of these two proteins has > already been determined by XRD, is it possible to align their active > site sequences to highlight the similarities of the substrate > binding sites? Would the tools mentioned on your website (list of > online resources for structure superposition) be useful for this > purpose and if so, would it be possible for you to advice on which > would be the best one and how one could go about it? > Our need is to more or less obtain a pictorial comparison of the two > active sites to emphasise on the substrate specificites and > preferences of both the catalysts. I have no experience in such > determinations and I hope that my query is not too unappropriate. > > Thank you. Hoping to be excused for my ignorance and hoping to hear > from you soon, > With warm regards, > Madhura Rale. Dear Dr. Rale, It is a good question -- Unfortunately, there is no simple answer to what is the best method for comparing known structures or active sites -- it generally depends on the specific structures you are comparing! If the two proteins are rather closely related, it is an "easy" case and probably most of the methods will do a fine job. If they are distantly related, it may be that some methods will work and others will not, and which programs are successful will be different for different input proteins. It also depends what you already know, and what you are trying to prove. If you already know that in structure A, residues 10, 12, and 15 correspond to residues 48, 50, and 52 in structure B, then you would simply use any molecular modeling program to superimpose A and B using just those residues. Or, if you already have a sequence alignment of the two proteins, some programs can use that alignment to superimpose the 3D structures. I would just use Chimera to match specific residues, or use a sequence alignment, or even to guess the sequence alignment and then use that to superimpose the structures. I work with Chimera and familiar with it, and know it can do these things. Chimera is not a web server, but can be downloaded free for noncommercial use (Mac, Windows, Linux): <http://www.cgl.ucsf.edu/chimera/index.html> Discussion of how to superimpose structures in Chimera: <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/superposition.html> Structure comparison tutorial: <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/ squalene.html> If you try using Chimera and run into difficulties, you can contact me for more specific help. My "online resources" web page <http://www.cgl.ucsf.edu/home/meng/grpmt/structalign.html > is separate from Chimera and is specifically limited to: (a) Web servers and databases (there are other programs, e.g. Chimera, that you could download and then use on your own computer) (b) comparisons based on overall structures (there is another large set of programs that instead focus on binding or active site patterns) Thus if you are more interested in comparing the active sites and not so much the overall structure, a general molecular modeling program may be more useful than the servers in that page, but if your proteins are an "easy" case, probably any of the above would be fine. The active site methods mentioned above are mostly for finding other proteins with a similar active site starting with your one structure of interest (not superimposing two proteins you already know about), so they are probably not very relevant to your situation. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

starting chimera
by Bala subramanian 26 May '09

26 May '09

Friends, I downloaded the latest chimera build and installed it successfully without any error. When i give chimera in command line, i get the following error. But when i start the chimera 1.3 version, it works without any problem. I am using the latest build in Fedora 10. Traceback (most recent call last): File "/usr/local/chimera_new/share/__main__.py", line 65, in <module> value = chimeraInit.init(sys.argv) File "/usr/local/chimera_new/share/chimeraInit.py", line 374, in init tkgui.initializeGUI(exitonquit, debug_opengl) File "CHIMERA/share/chimera/tkgui.py", line 2587, in initializeGUI File "/usr/local/chimera_new/lib/python2.5/site-packages/PIL/__init__.py", line 309, in checkConfig File "/usr/local/chimera_new/lib/python2.5/site-packages/Togl.py", line 27, in __init__ Tkinter.Widget.__init__(self, master, "togl", cnf, kw) File "/usr/local/chimera_new/lib/python2.5/lib-tk/Tkinter.py", line 1930, in __init__ (widgetName, self._w) + extra + self._options(cnf)) _tkinter.TclError: couldn't choose pixel format Couldn't configure togl widget Thanks, Bala

2 1