- Chimera-users - RBVI Mailing Lists

Re: [Chimera-users] quick angles question
by Tom Goddard 15 Aug '08

15 Aug '08

Hi Jeff, Here is a Python script to report the angles made by bonds attached selected atoms. Just select the atoms, then open the script. Output will be printed to the reply log. Tested in Chimera 1.2548 but should work in much older versions. Tom Jeff Triffo wrote: > hi Tom, > > if I have a Chimera marker file full of interconnected markers, is > there a quick/easy way to report all the angles formed in the > meshwork? (screenshot attached) > > I figure the easiest way is to cycle through the markers and survey > the angles it makes with each attached marker, but I don't know how to > do that (but it sounds like something that is probably straighforward > in python) > > thanks for any input there, > > -Jeff > # ----------------------------------------------------------------------------- # Report all angles made by bonds originating from selected atoms. # from chimera import selection, angle atoms = selection.currentAtoms() print '%d atoms selected' % len(atoms) c = 0 for a in atoms: bonds = a.bonds for b1 in bonds: for b2 in bonds: if b1 < b2: a1 = b1.otherAtom(a) a2 = b2.otherAtom(a) t = angle(a1.coord(), a.coord(), a2.coord()) print ('Angle %s %s %s = %.3f degrees' % (a1.oslIdent(), a.oslIdent(), a2.oslIdent(), t)) c += 1 print '%d angles reported' % c import Accelerators.standard_accelerators as sa sa.show_reply_log()

1 0

Re: [Chimera-users] midas/6155 (Chimera error)
by Eric Pettersen 14 Aug '08

14 Aug '08

On Aug 14, 2008, at 1:23 PM, Christine Deillon wrote: > Hi Eric, > > I try to save a movie of a collagen molecule (cylinder shape) > just moving around its major axis (along the molecule) for about > 15 secondes, then I would like to play the movie in the microsoft > power point program > is it possible to do that with chimera? > > Christine Hi Christine, Yes, absolutely you can do that. There is a Chimera tutorial that covers movie-making in good detail here: Movie Making in Chimera The "Spin Movie" section of the tutorial is almost exactly what you are asking for. Issues with embedding movies into PowerPoint are at the very end of the Movie Recorder documentation page: problems in PowerPoint --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

version 1.2540 stability
by James Fethiere 14 Aug '08

14 Aug '08

Hi, I just upgraded my May version with the last version of Chimera for PC and am having stability problems. Every now an then (every 10' or so), chimera freezes and the cursor flickers for a couple of seconds; then all goes back to normal. Sometimes, it just crashes completely. Is this last version more demanding on memory? Thanks James

2 3

Re: [Chimera-users] calculation of volume
by Elaine Meng 14 Aug '08

14 Aug '08

Hi Navnit, Sorry, I don't know of a way to calculate the van der Waals volume in Chimera. You can see the VDW volume, of course, by simply displaying the atoms in the sphere representation, but that does not give the volume value. In theory, you could get values closer to the VDW volume by calculating molecular surface with smaller and smaller probe radius. In practice, this tends to increase the number of surface calculation failures, and currently the smallest allowed probe radius value is 0.5 angstroms. Best, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html On Aug 14, 2008, at 7:01 AM, Navnit Kumar Mishra wrote: > Hi Elaine; > > Thank you for so detailed description. I am interested in measuring > the compactness of the complex during the simulation, I think the > calculation of the ratio of molecular volume to van der waals volume > provides the compactness. I have tried the procedure as you > suggested to calculate the molecular volume, the value in replylog > file is in two digits precision, for these calculation can I get the > value in four digits precision. I am using latest chimera version > 1.2540. I can calculate the total van der waals volume using the van > der Waals radii for each atom excluding the hydrogen atoms. Is there > a way in chimera to calcualte the van der waals volume. I would be > thankful to you for any suggestions. > > with regards, > navnit

3 3

Color zone with transparency
by Tom Goddard 14 Aug '08

14 Aug '08

Daniel Wilson wrote: > Hi Tom, > > ... > > The other thing I noticed is that you lose transparency on a whole volume when you color zone one region of it? or am I making something wrong? Is it not possible to have a single volume with two different colours and transparent? > > Thanks for you advice and kind offer, > regards > Daniel > Hi Daniel, When I make a transparent surface for a volume by pressing the volume dialog color button and making opacity 0.5 and then use color zone to color part of the surface (using a PDB model), the transparent part far from the zone remains transparent. Also works if select the volume surface and use the Actions / Surface / Transparency menu then color zone. What are the exact steps you use when it fails to preserve transparency? Tom

1 1

Two transparent models
by Tom Goddard 14 Aug '08

14 Aug '08

On Aug 11, 2008, at 12:15 PM, Daniel Wilson wrote: > Dear Elaine, > > I realise that there have already been requests about fixing the bug > in Chimera for displaying two transparent maps at the same time, so I > guess I am just asking whether this is likely to be fixed anytime > soon? We are desperate to use this function for a figure for a paper :) > > THanks, > Daniel > > Dr. Daniel N. Wilson > > Gene Center Munich > Department of Chemistry and Biochemistry > Ludwig-Maximilians-Universität München > Feodor-Lynen-Str. 25 > 81377 Munich, Germany Hi Daniel, The incorrect transparency in Chimera when 2 or more models are transparent is very difficult to fix and will not be fixed any time soon. The trouble is that Chimera draws each model separately and it is not possible to correctly handle transparency without intermixing the drawing of parts of models (in depth order). If you use Chimera image saving in the POVray raytracing mode it will correctly show multiple transparent models. The trouble is that this takes a long time to render and adjusting the levels of transparency many times to get the right appearance may be tedious. It would be possible to make a script that combines the currently displayed map surfaces into a single model and hides all the original models so that multimodel transparency would appear correct on-screen. But the combined model would not update when you changed the transparency, color, ... settings of the separate maps. It would require rerunning the script that makes the single model. This would be tedious to use. But if you think it worth trying I can write the script and send it to you. It would not work for transparent molecular models (ribbons and atoms), just surfaces. Tom

1 1

Hydrogens in proteins
by Walter Novak 13 Aug '08

13 Aug '08

Hi group, So I am struggling with hydrogens in proteins. I have neutron data which shows H-atom positions. Well, Deuterons, but here are the issues. If I open a pdb in Chimera with old school hydrogen names like HG1, how can I get it to write out the new ones (like HG11) without explicitly adding the hydrogens in Chimera? I don't want the atom positions to change. Also, I notice Chimera doesn't seem to handle deuterons optimally. Writing out the pdb moved the atom name column to the left one space and changed the atom type in the last column back to H. The problem is caused by Coot, which we use to perform real space refinement of atom positions, but to quote George Sheldrick, "I think that we will have to 'remediate' Coot (and the whole of CCP4 for good measure). I advise all SHELXL users NEVER to deposit hydrogen atoms, it saves lots of hassle." Unfortunately, the point of my project is to see the hydrogens!!!! Thanks for any help you can offer, Wally Walter R.P. Novak, Ph.D. Postdoctoral Fellow Rosenstiel Basic Medical Research Center Brandeis University 415 South St. MS 029 Waltham, MA 02454-9110 Phone: (781) 736-4944 Fax: (781) 736-2405

2 2

opening CASTp results
by Walter Novak 13 Aug '08

13 Aug '08

Hi all, How can I open my own CASTp results easily? The fetch command works great, but I need to submit some modified structures, and I don't see CASTp under file type in the open window. Thanks, Wally Walter R.P. Novak, Ph.D. Postdoctoral Fellow Rosenstiel Basic Medical Research Center Brandeis University 415 South St. MS 029 Waltham, MA 02454-9110 Phone: (781) 736-4944 Fax: (781) 736-2405

3 4

calculation of volume
by Navnit Kumar Mishra 13 Aug '08

13 Aug '08

Hello all; I am trying to compute the molecular volume of a complex. Chimera first computes solvent-excluded surface area using MSMS. I see it does not compute the surface area of ligand. I am wondering if I can add the extra parameters or atom types for my ligand in some file. I would like to calculate the molecular volume from amber trajectory. Can some one suggest me how to automate the computation of surface area and molecular volume for each snapshot. If you know, please point out the article which describes the procedure for the volume calculation. with regards, Navnit

2 1

representing 70s ribosome in ribbon
by Bong-Gyoon Han 12 Aug '08

12 Aug '08

Hi, I am tring to show the full 70S ribosome structure (PDB id: 1GIX and 1GIY) in ribbon representation with EM experimental density together. These PDB data consist of backbone atoms only (single alpha carbon for each a.a and single phosphate for each nucleotide). Ribbon option does not generate any ribbon (due to the incomplete information in the PDB?). Is there any way to show this molecule in ribbon format? I assume that backbone atoms must be enough to generate ribbons. BGHan

2 1

IMOD model reader question
by William Jeffrey Triffo 12 Aug '08

12 Aug '08

I have an IMOD model (just a bunch of contours, representing filaments) that I tried to load into Chimera, but it threw some errors. This was odd, because it was a model I had augmented (added more contours) from a previous model that did load correctly (and I re-verified after the load error). is it helpful to forward the model file in question? best, -Jeff

2 1

MatchMaker and Find Clash in nogui mode
by Ryan 11 Aug '08

11 Aug '08

Hi. I read in the archive (2004) that someone was looking to use MatchMaker in the nogui mode / command line, but that was not a possibility at the time. I am wondering if this ability has ever been implemented, and if so, how does one go about scripting this. Additionally, i would like to use the 'Find Clashes/Contacts' function in nogui mode. Is this possible? Thanks a lot, ryan

2 1

protonating the protein
by Elaine Meng 11 Aug '08

11 Aug '08

Hi Francesco, > However, if you are using charges assigned in Chimera for something > (Dock Prep with AddH, Add Charge, and write Mol2 for input to DOCK > scoring grid calculations, for example), you would need to add the > protons in Chimera before assigning charges. This could be done by > selecting the carboxylate oxygens you want to get protonated (no more > than one per carboxylate group, of course) and changing their atom > types with the command: > setattr a idatmType O3 sel > prior to running AddH and Add Charge (alone or as steps in Dock > Prep). It is not necessary to rename the residues. Add Charge will > then recognize the neutral forms of ASP and GLU and use the > corresponding partial charges. I just tested this in the Chimera > production release, 1.2540 (July 9). The above is definitely true, you do not need to rename the residues in Chimera, but further tests reveal to get the correct charge distribution on the protonated carboxylic acid, the atom names also need to match the AMBER lib files: the protonated oxygen should be named OE2 (if glutamic acid) or OD2 (if aspartic acid) and the "free" oxygen should be named OE1/OD1. This will already be true sometimes, but not always. If you need to switch the atom names around before adding charges, it can be done by text-editing the PDB file or with commands. For example, you could change the name of an atom by selecting it and then using a command like: setattr a name OE2 sel After assigning charges, you can see the values as labels, for example: labelopt info charge la :6.a Again all this was tested in the production release 1.2540. Best, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

Volume planes tool
by Elaine Meng 08 Aug '08

08 Aug '08

Hi Jeff, Here is another idea, still not exactly what you were asking for, but perhaps worth a look. You can use the Per-Model Clipping tool (under Tools... Depiction) to show a thin slab of the data, and you can interactively rotate and translate the slab any way you want relative to the data with the mouse. http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/per-model/ per-model.html Just choose which model to clip, enable clipping, turn on slab mode and adjust clipping with mouse. You may also want to adjust the contour level in Volume Viewer. I tried it on emd_1274.map in the production release (1.2540). You can use it on solid, surface, or mesh volume displays. Below I attach an image of a slab surface display together with an unclipped solid display (a second copy of the same data). There is also a command to control per-model clipping in a script, mclip. It lets you specify location/orientation in the data coordinate system or the viewing coordinate system. http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/mclip.html Best, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

Chimera: doubt on axes measurement
by Giovanni Cardone 07 Aug '08

07 Aug '08

Hi everybody, I have a doubt about my proper using the tool Axes for measuring angle between helices. After aligning two model and generating the axes corresponding to the helices of interest, I select them in the 'Structure Measurements' dialog windows. As you can see from a snapshot, they look properly selected. They are almost overlapping, but in the Reply Log I get the following info: col_best_001.pdb helix 10/col_best_005.pdb helix 2 crossing angle: 36.9 degrees, distance: 15.3 angstroms Beside the value of the angle seeming to me too high, shouldn't the distance between the helices be within few angs (at least according to how I interpret the documentation)? Probably I am missing something. Thanks in advance, Giovanni Cardone

2 1

Protonating the protein
by Francesco Pietra 07 Aug '08

07 Aug '08

Hi: I am not saying anything new. I have a (for me) difficult problem of protonating a protein homology model (built with Modeller) where there are several halogen ion ligands. Actually I succeeded in getting a workable model. Chimera loads it and add hydrogens. I could even prepare the model for DOCK6, generating spheres. Now, however (and also because, before docking small ligands with DOCK6, I want to dock polypeptides, probably with DOT2) I would like to assign specific protonation states to certain carboxylic acids. That is, I want to create an overall model where certain facing carboxylic acids actually face as "carboxylate-carboxylic acid" or as "carboxylic acid-carboxylic acid", or, finally, as "carboxylate-carboxylate", the latter also with metal ligand in between or not. Question: to which extent can Chimera aid the task? And which other package (pdb2qr, H++, ...) may aid Chimera? Or no other package, but simply renaming the said residues in the pdb file and let Amber 10 (which is the package I'll use for MD, with ff99B ff for the protein) do the job of eliminating clashes? All that shows that I have no experience in selective protonation, and the halide ions (in the above said work, I have them simply under "ATOM" under the specific chain of the amino acid residues, not "HETATM", as the latter caused a lot or problems) create difficulty to protonating packages. Thanks for giving me a general guideline along with best moving. francesco pietra

2 1

Chimera 1.2540 installer options and unattended installation
by Frank Thommen 07 Aug '08

07 Aug '08

Hi chimera-users, the Chimera installer seems to know some options and modifiers, but I could not find out what they mean: # ./chimera-1.2540-linux.exe -help UnZipSFX 5.41 of 16 April 2000, by Info-ZIP (Zip-Bugs(a)lists.wku.edu) Valid options are -tfupcz and -d <exdir>; modifiers are -abjnoqCLMVX. # Does anybody know what these options and modifiers do or where I can read about them? My motivation is, that I'd like to install Chimera in a non-interactive way (batchscript) in a non-standard location. Is there a way to achieve that? Thanks in advance frank -- Frank Thommen - Structures IT Management and Support - EMBL Heidelberg structures-support(a)embl-heidelberg.de - +49 6221 387 8353

4 4

ConSurf display in Chimera
by Elaine Meng 06 Aug '08

06 Aug '08

Hello everybody, The ConSurf Server <http://consurf.tau.ac.il/> now provides results as Chimera Web data: a single click displays the color-coded query structure and multiple sequence alignment in your locally installed copy of Chimera. For a screenshot and example Web data file, see: http://www.cgl.ucsf.edu/chimera/consurf/consurf.html More about Chimera Web data: http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/webdata/webdata.ht… Special thanks to Elana Erez and the Ben-Tal and Pupko groups at Tel Aviv University, and to Fabian Glaser. Enjoy! Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

Re: [Chimera-users] mouse selection problem
by Eric Pettersen 06 Aug '08

06 Aug '08

Meikel Diepholz wrote: > Hi, > just a small problem I hope. > When I am selecting residues with ctrl +left mouse > button, chimera is always replacing the earlier selection, > independent on the selection mode I chose (append, subtract). > > Is it possible to change this? Hi Meikel, This behavior isn't a bug per se, but rather a deliberate design decision. We decided to not have the mouse selection honor the selection mode since it is possible to emulate all the selection modes directly with the mouse (except for intersect). If you hold down the Shift key as you are making a mouse selection then everything chosen with the mouse will have it's selection state toggled (selected items become unselected and vice versa), and other items will not have their selection state changed. So you can "subtract" by shift-control clicking/dragging on selected items, and you can "append" by shift- control clicking/dragging on unselected items. --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

Text statistics from Matchmaker
by nettles 04 Aug '08

04 Aug '08

I have found MatchMaker in Chimera an incredibly useful alignment tool. Thank you to the UCSF team! Now, I want to do do a mutliple alignment of many structures (~100) off a single reference structure, and output a text record of the residue pairings involved in the individual alignments along with their RMSD. In this particular case, I'll be looking at only small sequence variations of the same protein (with different drugs and cofactors). Accordingly, I would also like to output the RMSD of residue pairs beyond the alignment cut for relatively easy identification of regions having maximal variations. Advise is appreciated, With regard, Jim ________________________________________________________ James Nettles, Ph. D. Assistant Professor Department of Pediatrics, Emory University School of Medicine ________________________________________________________

2 1

copy cmd in nogui script
by James A. Cleland 01 Aug '08

01 Aug '08

I was wondering if anyone was able to run chimera 'headless' using -nogui. I would like to be able to run the program from a script and without an X server, or against Xvfb or equivalent if necessary. My command line is /var/lib/chimera/bin/chimera --nogui --silent --script <scriptname> The script that I run sets the window size, element colors, rotates the image, and then does a copy file to save a ray traced PNG file. I have run this without -nogui and accepted the POV Ray license agreement. Adding -nogui results in the following output Error while processing <scriptname>: AttributeError: '_chimera.NoGuiViewer' object has no attribute 'x3dWrite' (see reply log for Python traceback info) Parse error at line 1: no element found My chimera version is "chimera production version 1 build 2540 2008/07/09". This is running on a linux machine, 2.6 kernel. Any suggestions you have would be appreciated. Thanks! James

3 3

problem with the volume display in version 1.2540
by Magali Cottevieille 01 Aug '08

01 Aug '08

Hi, I have just installed version 1.2540 of Chimera (I had before version 1.2470). There is a problem with MRC and SPIDER EM volumes: see attached image: left a volume in the new Chimera; right the same volume with the old Chimera. Is it a bug, or linked to my configuration?? Thanks in advance, -- Magali Cottevieille, Ph.D. Howard Hughes Medical Institute, Department of Biochemistry and Molecular Biophysics, 630 W 168th St, P&S Black Building 2-221 New York, NY 10032 Ph: (+1) 212-305-9521 Fax: (+1) 212-305-9500 Email: mc3077(a)columbia.edu magali.cottevieille(a)gmail.com

2 1

import GRID contour map
by Sebastian Kruggel 01 Aug '08

01 Aug '08

Hi All, I try to import a contour map generated with GRID and saved as *.grd or *.cnt file. Trying to open th e*.grd file in chimera I get the error message Opening I:\strukturen\prep_modTemp\1j1b_DRY.grd I:\strukturen\prep_modTemp\1j1b_DRY.grd: UHBD file does not contain integer value 1 at bytes 96-99 using either little or big endian byte order. Found 46146 Done opening I:\strukturen\prep_modTemp\1j1b_DRY.grd With *.cnt I get file not found, because file is supposed to be a *.bmp. Does anybody have an idea, how to open my nice GRID contour map? Greetings Sebastian -- Sebastian Kruggel Institut für Pharmazie Raum 112 Bundesstr.45 D 20146 Hamburg Tel. +49(0)40 42838 3626 Hi All, I try to import a contour map generated with GRID and saved as *.grd or *.cnt file. Trying to open th e*.grd file in chimera I get the error message Opening I:\strukturen\prep_modTemp\1j1b_DRY.grd I:\strukturen\prep_modTemp\1j1b_DRY.grd: UHBD file does not contain integer value 1 at bytes 96-99 using either little or big endian byte order. Found 46146 Done opening I:\strukturen\prep_modTemp\1j1b_DRY.grd With *.cnt I get ‘file not found’, because file is supposed to be a *.bmp. Does anybody have an idea, how to open my nice GRID contour map? Greetings Sebastian -- Sebastian Kruggel Institut für Pharmaz ie Raum 112 Bundesstr.45 D 20146 Hamburg Tel. +49(0)40 42838 3626

3 2

Re: [Chimera-users] question posted in chimera mailing list
by Elaine Meng 01 Aug '08

01 Aug '08

Hi Sebastian, Chimera does not read maps from GRID. Here are the map formats that Chimera knows about: http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/filetypes.html#volume Because you used filename extensions we assigned to other formats as shown in that table, Chimera tried to read the file as those formats (which it is not, hence the errors). Also, I do not know what is happening with your chimera-users subscription - maybe try to sign up again? http://www.cgl.ucsf.edu/ mailman/listinfo/chimera-users/index.html Best, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html On Aug 1, 2008, at 12:54 AM, Sebastian Kruggel wrote: > Dear Elaine, > > I posted a message in the mailing list – and got the answer I > wasn’t member, though I am?! > So I just send it once more, directly to you, because you answered * > very > * helpful last time ;-) > > Message was: > Hi All, > > I try to import a contour map generated with GRID and saved as > *.grd or *.cnt file. > Trying to open th e*.grd file in chimera I get the error message > > Opening I:\strukturen\prep_modTemp\1j1b_DRY.grd > I:\strukturen\prep_modTemp\1j1b_DRY.grd: UHBD file does not contain > integer value 1 at bytes 96-99 > using either little or big endian byte order. Found 46146 > Done opening I:\strukturen\prep_modTemp\1j1b_DRY.grd > > With *.cnt I get ‘file not found’, because file is > supposed to be a *.bmp. > > Does anybody have an idea, how to open my nice GRID contour map? > Greetings > Sebastian > > Thanks in advance > Sebastian > > > > -- > > Sebastian Kruggel > Institut für Pharmazie > Raum 112 > Bundesstr.45 > D 20146 Hamburg > Tel. +49(0)40 42838 3626 >

1 0

Re: [Chimera-users] suggestion for superimposig
by Elaine Meng 01 Aug '08

01 Aug '08

On Aug 1, 2008, at 7:35 AM, Srinath Thiruneelakantan wrote: > Hi, > I am microbiologist and wanted to know the strucutre of a protein > of M. tuberculosis, whose crystal structure has not been solved, > but its homologue in Bacillus has been. So by Swiss-modeller > generated a MODEL and downloaded it in PDB format. Now I wanted to > superimpose the generated model with of bacillus and with PDB of > truncated protein of E. coli. As I am not of bioinformatic > bakground, please suggest me how to get the FINAL output in PDB > format so can have a comarison of domains between these three > proteins. > Thank you, > Srinath Hi Srinath, Just open all of the PDB files in Chimera (for example, with File... Open). You can change the display if you want, for example with Presets... Interactive 1 (ribbons). Then you can use the MatchMaker tool (under Tools... Structure Comparison) to superimpose the proteins. Choose the "reference" structure on the left and one or more structures to match onto it on the right. It usually does not matter which one you use as the "reference" - try using the first one listed. In most cases, the default settings work well, so it is very easy: turn off "Show alignment(s)..." if you don't want to see the sequence alignments, but otherwise just click "Apply" to match the structures. It will take a few seconds to compute the alignments and then match the structures. Then you can compare the structures in Chimera, or write out PDB as mentioned below. If that does not give a good enough superposition, then you can try changing parameters. For details see the MatchMaker manual page (simply clicking "Help" on the dialog will open your local copy): http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/matchmaker/ matchmaker.html These tutorials have examples of superimposing and comparing structures: "Superpositions and Alignments" http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/ alignments.html "Structure Analysis and Comparison" http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/squalene.html Additional discussions about superimposing structures: http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/morph/ morph.html#superimposing http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/ images.html#matching After the proteins are superimposed, you can write out the structures as one or more PDB files with "File... Save PDB" in the Chimera menu. http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/savemodel.html#pdb I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

Distance Lines
by hsosa＠aecom.yu.edu 31 Jul '08

31 Jul '08

Hi , I want to make a solid line (with chosen color) between two atoms. Kind of like the line that appears when measuring distances between atoms, but without the distance legend. Is there an easy way to do that ? Thanks Hernando -- ----------------------------------- Hernando Sosa Dept. of Physiology and Biophysics Albert Einstein College of Medicine 1300 Morris Park Av. Bronx NY 10461 phone (718) 430-3456 FAX (718) 430-8819 email hsosa(a)aecom.yu.edu -----------------------------------

2 1

PDB morphing
by Dougherty, Matthew T. 28 Jul '08

28 Jul '08

I have a complex structure in two conformations: resting and active. Each structure consists of 24 monomers, corresponding to 24 pdb files. Each monomer file between conformations matches in terms of atom numbers, chain ID, etc. I can morph a single monomer between conformations. I am having no success morphing all the monomers simultaneously between the conformations. Any suggestions on how to organize my data to overcome this? thanks, Matt Matthew Dougherty 713-433-3849 National Center for Macromolecular Imaging Baylor College of Medicine/Houston Texas USA ========================================================================= =========================================================================

2 3

Distance between helices
by Thomas Goddard 28 Jul '08

28 Jul '08

HI Tom How do I compute and show the distance between 2 regions (2 alpha helixes) of 2 crystal structures (docked in the density maps), similar portions of each is already highlighted/selected to show the DNA binding region (without showing the atoms). THanks Andy Dr. Anindito Sen (Ph.D) Research Associate , Dept. of Biochemistry and Molecular Genetics University of Virginia Box 800733 Charlottesville, VA 22908

3 3

Re: [Chimera-users] BIOMT matrix in Chimera?
by Elaine Meng 28 Jul '08

28 Jul '08

On Jul 27, 2008, at 10:38 AM, Francesco Pietra wrote: > > Hi Elaine: > After a brief playing with Multiscale Models, I was considering your > last suggestion below. I modeled each chain separately, also because > the X-ray diffr data show some conformational differences. Modeling > gave very good DOPE score. Now the problem is appending Chain B to > chain A, etc (each chain opens correctly in Chimera). I have a Python > script (not tried yet) to insert the Chain identifier (which Modeller > did not print), update the Atom serial number, and then append the > files. May I ask, in view of Chimera, if the "Atom number + 1" printed > in Modeller pdb files at column 80 can be left at it is, i.e. not > updated on appending the files? I forgot about that and I have already > problems enough with the script at my minimal level with Python. I > assumed that Python identifies the columns one unity less than PDB > numbering. Finally, do you know what means "1SG" at columns 74-76 of > Modeller pdb files? Hi Francesco, I don't know what MODELLER puts in those columns after "B- factor" (61-66, which may actually contain the "modeller error profile," since a homology model doesn't really have B-factors). Maybe you could ask the modeller people. However, for Chimera purposes they could be omitted (changed to blank). According to the description of ATOM lines: http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/framepdbintro.html 67-76 is supposed to be blank, 77-78 element symbol, 79-80 charge. I believe Chimera tolerates lines without the last few columns, as long as the X,Y,Z coords are still there. If your files have stuff in the later columns, it might still be OK, just try opening them in Chimera to see. My suggestion of modeling the multimer from a template multimer would still incorporate the chain differences - you would still use A as the template for A, B for B, etc. However, I don't know how to make modeller do that. > Following the "appending" plan below, is it correct to > append pdb files lacking all hydrogens (as provided by Modeller) and > then rely on Amber's LEAP to complete the multimer? > francesco I don't know what you mean by "complete the multimer" - if just adding hydrogens, you can do that with AddH in Chimera (or addh command). That does not use leap/amber. Best, Elaine

2 1

How to print molecular structures?
by �� 28 Jul '08

28 Jul '08

Hi all, I want to print 1000 molecular structures one by one. I am wondering if it is possible to print molecular structures by Chimera. If it is not, are there some other software can do this? Please kindly advice. Any answer would be appreciated! Best regards, Yolanda Guo Northeast Normal University

2 1

Pointers to writing extensions in chimera
by Mario J. Borgnia 25 Jul '08

25 Jul '08

Hi all, I would like to try and write an extension to chimera. Could anyone give me some pointers on where to find the tools necessary to do so. Thanks Mario -- +---------------------------------+ | Mario J. Borgnia, Ph. D. | | | | Lab of Cell Biology | | NIH NCI/CCR | | 50 South Drive Rm 4306 MSC 8008 | | Bethesda MD 20892-8008 | | | | Tel: (301) 594 0563 | | mborgnia(a)nih.gov | +---------------------------------+

3 2

BIOMT matrix in Chimera?
by Francesco Pietra 25 Jul '08

25 Jul '08

>From a homotrimer pdb template I have created (with Modeler) a homology model, with very good score, using a single subunit. Is it possible with Chimera to create the homology homotrimer, as this is what I need? To this concern, the original pdb for the template includes the BIOMT transformation matrix for both crystallographic and non-crystallographic operation. That is, the pdb includes as many identical chains to open directly the homotrimer for the crystallographic pose. Is that BIOMT matrix usable by Chimera for the homology model? Or the way ti take is another one? I used much technical language, well above - however - my expertise in these affairs. That in view of any help, for which I'll be most grateful. Thanks francesco pietra

2 1

nogui vrml export?
by Paul 25 Jul '08

25 Jul '08

Hello, Is there any way to export .vrml or .wrl in the nogui mode? The idea would be to run a script that would load a .pdb file and transform it into a few different representations and then export them. I saw in previous posts that there is no support for exporting images in this mode. Thanks, Paul

2 1

superimposing active sites
by Elaine Meng 24 Jul '08

24 Jul '08

On Jul 23, 2008, at 6:18 PM, Maria wrote: > Elaine, > I have created active sites by using the zone in > chimera for 72 proteins. Is there a way I can > do structural superimposition of the active > sites using chimera? > Thanks, > Maria Hi Maria, Sure, there are many, many ways to superimpose structures in Chimera. If the structures are homologous (have the same fold, usually also some sequence similarity), probably the easiest are these two methods: (A) MatchMaker tool (or the "matchmaker" command, which acts exactly the same way) - it creates a sequence alignment and then uses those alignment columns to superimpose the structures (B) if you already have a sequence alignment, you can open that in Chimera and use it to superimpose the structures With both (A) and (B) you would use the whole structures - it is OK if you are only displaying a zone as long as the other atoms are still there (are merely hidden, not deleted). Some other approaches can be used for either homologous or nonhomologous proteins: (C) "match" command - you specifically name the atoms you want to use for fitting in the command; for example, atoms from a few active site residues and/or from the ligand (D) interactive fitting "by hand" Links to more detailed information... Discussion and examples of more than one method: http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/morph/morph.html#s… http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/squalene.html#com… http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/images.html#match… MatchMaker man page: http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/matchmaker/matchma… "matchmaker" command man page: http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/mmaker.html "match" command man page: http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/match.html Using a pre-existing sequence alignment: http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/multalignviewer/fr… (see "Structural Superposition" section) Best, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

making MD movie
by bala 24 Jul '08

24 Jul '08

Hello freinds, While recording a MD movie or saving an image, chimera considers full screen ares. Is there any way that i can select a particular area in the screen and ouput the image or the MD movie accordingly. Thanks, Bala

2 1

Movie recording does not stop
by Tom Goddard 23 Jul '08

23 Jul '08

Hi Jean-Paul, The script you sent works for me with Mac X11 Chimera 1.2540 on Mac OS 10.4.11. I open two maps and the resulting movie is correct. You don't have any motion going on like a "roll" do you? Because the first line of this script "wait" with no frame count means that subsequent lines of the script will not be executed until all motion ceases. Likewise you have wait command with no frame count on the first two transparency setting lines. Tom Jean-Paul Armache wrote: > Thank you for the reply. It seems that I have today a lot of questions. > There is one more: > I have a script. When not in movie recording mode, it works fine. > However, if I input movie record and at the end movie stop and encode, > then at some point the script stops. Once it stopped with the labels, > so at the end I removed the labels. Now I have one map visible and I want > it to slowly get transparent to a point when it is no longer visible. > And here lies the problem. The script is fairly easy: > > wait; > movie record directory /Users/jean-paularmache/tmp-chimera; > > volume #1 transparency 0.0; wait; > volume #0 transparency 0.0; wait; > > > volume #0 transparency 0.05; wait 3; > volume #0 transparency 0.1; wait 3; > volume #0 transparency 0.15; wait 3; > volume #0 transparency 0.2; wait 3; > volume #0 transparency 0.25; wait 3; > volume #0 transparency 0.3; wait 3; > volume #0 transparency 0.35; wait 3; > volume #0 transparency 0.4; wait 3; > volume #0 transparency 0.45; wait 3; > volume #0 transparency 0.5; wait 3; > volume #0 transparency 0.55; wait 3; > volume #0 transparency 0.6; wait 3; > volume #0 transparency 0.65; wait 3; > volume #0 transparency 0.7; wait 3; > volume #0 transparency 0.75; wait 3; > volume #0 transparency 0.8; wait 3; > volume #0 transparency 0.85; wait 3; > volume #0 transparency 0.9; wait 3; > volume #0 transparency 0.95; wait 3; > volume #0 transparency 1.0; wait 3; > > > #movie finished > movie stop; > movie encode bitrate 12000 mformat avi output > /Users/jean-paularmache/Desktop/firstmovie.avi > > > > Ok, what happens is that Chimera generates endless amount of images. > Really, without cease. Now, if I do "movie stop;" from the command > line, it generates the avi file. However, the whole avi file consists > of one frame movie (meaning that even though it has the right amount of > frames, all are just one frame). > What is more surprising is that with other scripts this transparency > works. It is just right here that it doesn't want to cooperate. Could you > think of any reasons it might be behaving like that? > > > Best regards, > > Jean-Paul Armache

4 6

StrucMeasure and distance
by Jean Didier Pie Marechal 23 Jul '08

23 Jul '08

Dear all, a small question. I know how to calculate the distance between two atoms calling the "distance" command and I generally use it embedded in the scripts I write. However, this time, I'd like to have access through my script only to the values of the distances (nothing related to the display) in order to stock them. I thought I would find my way through by using the StructMeasure module, but I am not able to do so. How could I just have a return of the distances between two atoms in the shell? Thanks a lot, JD Dr. Jean-Didier Maréchal Professor Lector Unitat de Química Física Departament de Química Universitat Autònoma de Barcelona Edifici C.n. 08193 Cerdanyola (Barcelona) Tel: +34.935814936 e-mail: JeanDidier.Marechal(a)uab.es ----- Missatge original ----- De: chimera-users-request(a)cgl.ucsf.edu Data: Dimecres, Agost 8, 2007 9:00 pm Assumpte: Chimera-users Digest, Vol 52, Issue 6 > Send Chimera-users mailing list submissions to > chimera-users(a)cgl.ucsf.edu > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users > or, via email, send a message with subject or body 'help' to > chimera-users-request(a)cgl.ucsf.edu > > You can reach the person managing the list at > chimera-users-owner(a)cgl.ucsf.edu > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Chimera-users digest..." > > > Today's Topics: > > 1. writing translation/rotation (Thomas C. Marlovits) > 2. Re: writing translation/rotation (Elaine Meng) > 3. Re: writing translation/rotation (Eric Pettersen) > > > -------------------------------------------------------------------- > -- > > Message: 1 > Date: Wed, 8 Aug 2007 14:19:43 +0200 > From: "Thomas C. Marlovits" <marlovits(a)imp.univie.ac.at> > Subject: [Chimera-users] writing translation/rotation > To: chimera-users(a)cgl.ucsf.edu > Message-ID: <BAFCFCAA-D911-4E0C-8F5E-B41430E8E1B6(a)imp.univie.ac.at> > Content-Type: text/plain; charset="us-ascii" > > Hi, > > am looking for an analysis tool in Chimera that would write out - > let's say a matrix for translation/rotation of a pdb-file in > respect > to another one. > > Usage: would like to align chain A and chain B present in a pdb- > file > and want to know which translation/rotation matrix has to be > applied > in order to convert the non-aligned pdb-coordinates of chain B to > the 'new" aligned pdb-coordinates. > > Thanx for your help, > -Thomas > > > > -------------------------------------------------------------------- > ---- > ------- > > Thomas C. Marlovits, PhD, M.A.S. > > IMP-IMBA Research Center > - Research Institute of Molecular Pathology (IMP) > - Institute of Molecular Biotechnology, Austrian Academy of > Sciences > (IMBA) > > Dr. Bohr-Gasse 3 > Room IMBA/6.02 > A-1030 Vienna > Austria, Europe > > fone: (++43-1) 79044-4630 > fax: (++43-1) 79044-4401 > email: marlovits(a)imp.univie.ac.at > > > >

3 2

Making a spin movie
by Tom Goddard 23 Jul '08

23 Jul '08

Hi Andy, Here is a Chimera command script to make a movie that rotates the displayed models 360 degrees in 3 degree increments (120 frames) and writes the movie in Quicktime format (*.mov). movie record turn y 3 120 wait 120 movie stop movie encode output /tmp/movie.mov mformat mov bitrate 6000 Put this in a file with suffix *.cmd (e.g. spin.cmd) and open it with Chimera File / Open... or the open command to create the movie. Tom Anindito Sen wrote: > Hi Tom > Thanks for the reply. > > in the crystal structure- the region of interest (selected and > highlighted) lies in the interior. The idea is to make a movie of the > crystal structure rotating around the Y axis and one can visualize the > region of interest in a better manner. > > Therefore how can I generate a movie of this kind. > > Thanks > Andy

1 0

Electron density map around selected residues
by Miles Pufall 23 Jul '08

23 Jul '08

Hello - I have a couple of structures depicting a complex where the function of a loop appears to be important, depending on conditions. An overlay of structures solved under these two conditions shows subtle differences, but an examination of omit maps for this loop overlap where the model is built, but show quite different extra density, suggesting different alternate conformations. I am trying to make a figure of this loop with the 2fofc and omit maps overlaid on this loop under the two conditions. The figure, with a model and two electron density maps, can get messy. I would like to show just the electron density surrounding just the loop. Can you recommend a way to do this in chimera? Thanks - Miles Miles Pufall UC San Francisco

3 2

vista chimera 1.2540 R6025-pure virtual function call error when opening pdb or mrc file
by Nils Woetzel 22 Jul '08

22 Jul '08

Hi, I have problems with chimera 1.2540 win32 and 1.2539 win32. it is working in version: 1.2524 win32 I installed it an windows vista business sp1. I have also installed visual studio 2008 (9.0). When I try to open either pdb or an mrc file I get the same error window: Title: Microsoft visual c++ runtime library text: Runtimje Error! Program: C:\Program Files\chimera\bin\pythonw.exe R6025-pure virtual function call. the debug command line option just brings: initializing graphics create application loading Tix loading Pmw creating main window creating menus creating toolbar creating lenses initializing OpenGL initializing preferences initializing dialogs initializing COM initializing extensions Return code: 255 Press return or enter to to exit i try to open the pdb file (different files) before the return code: 255 I am not sure if the error actually comes from python.exe - but i could not find anything when searching for it. http://support.microsoft.com/kb/125749 explains the error, but i am not sure how to debug python code Is there a problem with that version of python or chimera with a visual studio installation or this runtime library error appearing independently of having visual studio installed or not. But the older release is working just fine: 1.2524 win32 so some new feature in chimera probably causes the error and might only show up in my environment?! Thanks Nils Woetzel Vanderbilt University

3 2

surface rendering
by Peter Lewis 22 Jul '08

22 Jul '08

Dear Chimera-Users I've recently changed my computer to a quad core system which runs Red Hat and virtual Windows. I've installed chimera (32 bit) on both linux and windows. I have tried using chimera downloads posted in both June and July this year but cannot get surface rendering to work for either operating system. Is this a bug with recent versions of chimera, and if so, how do I fix it, or is it a bug with my new system? Any help gratefully appreciated. Peter A/Prof Peter Lewis Molecular Microbiology Group School of Environmental and Life Sciences University of Newcastle Callaghan NSW 2308 Australia Ph: +612 4921 5701 Fx: +612 4921 5472

2 1

Movie contains overlapping windows
by Tom Goddard 21 Jul '08

21 Jul '08

Hi Jean-Paul, Yes movie recording will include windows that overlap the Chimera graphics window. This is an unfortunate limitation of the Chimera image saving caused by it capturing images directly from the screen. On some platforms an overlapped window may not appear because the contents of the graphics window are saved even when another window overlaps. But that is not the case on most platforms. So in most cases the machine cannot be used for other purposes when a movie rendering is in progress. We have been interested in eliminating this limitation for some years but Greg Couch who handles image capture has not had time to get to it, If you use raytracing for the movie capture then it does not matter if the Chimera window is covered. But raytracing takes much longer to render. Tom Jean-Paul Armache wrote: > Hello again, > > I re-checked the spider loading, and now it seems to work. I don't > know why it did not previously. > > I have another question though. I have two versions of Chimera on my > computer now. I am using Chimera X Window to generate movies, > because in respect to the Aqua version, if I start another application > (like Keynote, web browser etc), the movie does not contain any parts of > the screen on top of it. > If I use the Aqua version (and on Linux is the same), it includes the > currently on-top graphics into the movie. Is there a way to not do so in > Aqua? > > Best regards, > > Jean-Paul Armache >

1 0

10.5 mac Chimera hangs on resize
by Eric Pettersen 21 Jul '08

21 Jul '08

On Jul 21, 2008, at 4:32 PM, Jean-Paul Armache wrote: > Submitter Name: Jean-Paul Armache > Platform: (X11) Darwin 9.4.0 i386 > Chimera Version: production version 1 build 2540 2008/07/09 > Description > well, the X window tends to hang just after manually resizing the > window. Hi Jean-Paul, I was able to reproduce this and was able to come up with two solutions. One is to resize carefully. In particular, do not release the mouse button until you have stopped the mouse. I find that this always avoids the hang. The other solution is to upgrade your X11.app to the 2.3.0 version (as a prerequisite you need to be at OS X 10.5.4. or later). You can download 2.3.0 from here: http://xquartz.macosforge.org/trac/wiki/X112.3.0 --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

Problems saving eps files on Windows
by Julianne Chung 21 Jul '08

21 Jul '08

Hi, I am having trouble saving images in Chimera and was hoping that you may be able to help me out. I am running the latest version of Chimera on Windows. I have a molecule that I want to save as an eps file. I got to File --> Save Image --> Save As -->change the file type to eps and click Save, but no eps file appears in the directory I specified. Jpeg, png and tiff all work fine, but I can't get eps and ps to work. I've installed Ghostscript too, but that doesn't seem to help. Any suggestions are appreciated, Thanks, Julianne Chung Emory University

2 1

Re: [Chimera-users] Possible image saving bug
by Walter Novak 21 Jul '08

21 Jul '08

Hi Elaine, I agree that some colors are shinier than others. Also, my brightness was not zero, but was the default of 1. I think however, I have tracked the issue down to the position of my lights. I had them pretty straight on and resetting this position gives the pov-ray shininess I was expecting. Thank you, Wally On Jul 17, 2008, at 9:29 PM, Elaine Meng wrote: > Hi Wally, > on to problem #2. > > I was unable to reproduce this problem. Are you sure that the > "brightness" is >0? If brightness is zero, there are no > highlights. Below are two images, the top with shininess 128 and > brightness 10, the bottom with shininess 128 and brightness 0. > Actually now that I look at it carefully, the bottom one confuses me > because the cyan things are still shiny, so I'm cc-ing the others > (Greg, any explanation??). The other colors in the bottom image are > non-shiny as expected, however! > > Best, > Elaine > > <imagebright10.png> > > > <imagebright0.png> > > > Walter R.P. Novak, Ph.D. Postdoctoral Fellow Rosenstiel Basic Medical Research Center Brandeis University 415 South St. MS 029 Waltham, MA 02454-9110 Phone: (781) 736-4944 Fax: (781) 736-2405

2 1

<< two questions about Chimera >>
by Hatuey Hack 21 Jul '08

21 Jul '08

Hi all, I have to questions about Chimera: 1st.- Is it possible to search the mailing list to avoid doing questions that were already answered? 2nd.- As I do not know the answer to the first question, I would like to know how I can visualize double and triple bound as well as aromatic rings explicitly within Chimera. Regards, Hatuey

3 2

Morphing aligned maps
by Tom Goddard 21 Jul '08

21 Jul '08

Hi Haixin, The morph map tool just linearly interpolates the two volume 3-d arrays at each grid point. So it does not work correctly if you have moved one map relative to the other since it ignores their relative positioning. To use it in this case you need both maps to use the same grid so you have to "resample" one map. That is you recompute that map on the same grid as the other map using interpolation. The command to do that is "vop", for example, vop #1 resample onGrid #0 modelId #2 Now use morph map between model #0 and the resampled volume #2. Morph map doesn't provide a way to morph between more than 2 maps. That would be useful. You can use it to morph the separate pairs of maps 0 -> 1, then 1 -> 2. You can almost record a movie of this using the following trick. First record 0 -> 1 but when it asks you to save the movie leave that dialog alone (don't cancel since that will erase the saved image frames). Then record 1 -> 2 and then save the movie. Frames from both morphs will be included in the movie. The problem is that each morph plays both forward and backward so you get 0 ->1 -> 0 jumps to 1 -> 2 -> 1. You could avoid the looping with a small modification to the Morph Map code. You would edit chimera/share/MorphMap/gui.py adding a few lines in the next_frame_cb() routine. if next_f >= fmax: next_f = fmax self.step_direction = -1 would become if next_f >= fmax: next_f = fmax self.step_direction = -1 if self.recording: self.finish_recording() Keep indentation as shown since that is important in Chimera. Tom Haixin Sui wrote: > Hi, Tom > > ... > I have a map morphing question. I manually aligned two maps in Chimera > in order to do a map morphing for my presentation. However, the map > morphing does not happen at the aligned positions but shifted the > second map back to the position before the alignment. I wonder how > should I get arroudn this problem. Saving the second maps relatie to > the first and read it in again? > > Meanwhile, I have several maps I want to do map morphing and show > changing in between them. It will be great if chimera can work with > more than one maps and show the changed from map#1 to map#2, and then > #3 ... This feature can be helpful when people want to show several > conformational changes. > > Haixin

1 0

selection of a specific region from different chains
by Tom Goddard 21 Jul '08

21 Jul '08

Hi Andy, Use a command like "select :100-200 to select residues 100 through 200 in all chains. Tom Anindito Sen wrote: > HI Tom > I have a 5 separate chains (of the same crystal structure) docked > along my filament reconstruction. How do I select and highlight a > certain length of amino acids from each and every chain. Problem > happens when I try to select a region of the second or 3rd chain, > which "deselects" the pervious selection. > > Best Andy

2 1

3 volume histograms
by Tom Goddard 18 Jul '08

18 Jul '08

Hi Haixin, Chimera can display any number of volume data sets. But it only shows 3 histograms in the volume dialog, the 3 whose settings were most recently changed. You can use the Data menu on the volume dialog to show the histogram for a different volume (replacing the least recently used of the current 3 histograms). If you want a different maximum number of histograms (like 1 or 5) there is a setting in the volume dialog Data Display Options panel for "Maximum number of histograms". To make this new value the default use the Features menu Save Default Dialog Settings. Tom > >> *From: *Haixin Sui >> *Date: *July 17, 2008 6:12:29 PM PDT >> >> Installed the newest version and found a problem. This version can >> only work with at most three density maps. When you have four or more >> density maps read in, the volume viewer window will only display the >> control for the last three maps. >>

1 0

Distance between atoms using Python
by Tom Goddard 18 Jul '08

18 Jul '08

Hi Ed, Attached is some Python code for controlling ligand display based on distance between two atoms. Tom Edward Brignole wrote: > > Tom, > > Thanks again for your help with that atom display. Got another > MDtrajectory issue for you. I've got a ligand in each of 10 domains > in the structure and I only want to display the ligands in the frames > that have less than a certain distance between a particular atom in > the ligand and a particular atom in a neighboring domain. > > The distance command won't work for me because all it does is add a > distance to the distance dialog when I need it as a variable in the > script to evaluate with "if distance < 10: display atomspecs" > > Sorry to keep bugging you with these things but I assure you it isn't > without trying for several hours to no avail before finally resorting > to asking. > > Ed > def atom_distance(spec1, spec2): from chimera.specifier import evalSpec atom1 = evalSpec(spec1).atoms()[0] atom2 = evalSpec(spec2).atoms()[0] d = atom1.xformCoord().distance(atom2.xformCoord()) return d from chimera import runCommand if atom_distance('#0:15.B@C4', '#0:7.A@N3') >= 10: runCommand('display #0:SPM') else: runCommand('~display #0:SPM')

1 0