- Chimera-users - RBVI Mailing Lists

movie quality
by Ernesto Arias 04 Jan '12

04 Jan '12

Hi everyone, I've made some movies using the current Chimera alpha version (alpha version 1.6 build 35109, 2011-12-24) in an ubuntu 10.04 laptop. I've noticed that the quality of the movies is worse that in the version 1.5.3, and I have generated the movies using the same chimera session and the same script. I've seen this for at least avi and mp4 formats. The movie options I'm using in the script are: *movie record supersample 3 movie encode output movie.avi bitrate 5000 framerate 25 mformat avi* Does anybody know why the quality is worse in the newer Chimera version? Thanks in advance, Ernesto.

2 2

Grid on image
by Sukanya Punthambaker 04 Jan '12

04 Jan '12

Hello, I have a quick question about Chimera. When I save an image from Chimera it displays a grid on top of the image. How do I get rid of the grid? Thank you, -Sukanya Punthambaker.

2 1

Re: [Chimera-users] SURF for large proteins
by Tom Goddard 03 Jan '12

03 Jan '12

Hi Vijay, Chimera molecular surface calculation (using MSMS) fails for most molecules larger than 5,000 atoms. The main trick that can help is to split large multi-chain models into a separate model for each chain using the split command (e.g. "split #0"). Then use a separate molecular surface on each chain. The attached photo shows the result of that for chaperone 1aon with 21 chains with one subunit colored yellow so you can see its shape. If you use Coulombic Electrostatic Coloring (menu Tools / Surface & Binding Analysis) doing it on the split model gives a slightly different result than with an unsplit model. The potential on each surface is just the potential for one chain. Doing the calculation without split would use the potential for the entire model. The split version can be more useful if you are interested in complementary charges on interfaces between chains. Sometimes you can get a molecular surface computation that fails on one computer to work on another computer. Mac Chimera produces surfaces for larger models, and Windows Chimera has the most failures, and the failure rate for 64-bit Windows Chimera is much higher than 32-bit Windows Chimera which is higher than Mac (all versions). Not sure where Linux fits in. Another approach is to use a different kind of surface, one generated from a density map made by placing Gaussians at each atom. The molmap command creates this surface (e.g. "molmap #0 5" for a 5 Angstrom resolution surface). You'll probably want to use a high resolution (< 5A) since the electrostatics can vary on short distances. You might want to use the molmap "gridSpacing" option to get a finer mesh for the surface (e.g. "molmap #0 5 gridSpacing 1" for a 1 Angstrom grid). Currently only molecular surfaces can be colored by Chimera's Coulomb potential coloring code, so that won't work on these molmap surfaces. You would need an externally computed potential (e.g. from APBS or DelPhi) and then use the Chimera Electrostatic Surface Coloring tool (menu Tools / Surface & Binding Analysis) which uses those externally computed potential grids. Those external potential calculations can take a long time and a huge amount of memory for large models. I submitted a Chimera enhancement request to allow the Chimera built-in Coulomb coloring to work on any surface, but Eric who wrote that code has many other things to work on, so it probably won't happen soon. Tom -------- Original Message -------- Subject: SURF for large proteins From: Vijay Reddy To: Tom Goddard Date: 1/3/12 7:32 AM > Hi Tom, > > Happy New Year! Wish you the best for you and yours in the New Year! > > I was wondering if are there tricks to calculate and display MSMS > surface for large proteins, even with the coarse representations. I am > trying to display electrostatic potential. > > Many thanks, > Vijay > >

2 1

Hbond analysis in trajectories
by George Tzotzos 20 Dec '11

20 Dec '11

I'm trying to analyse Hbond formation during a 2ns AMBER trajectory involving receptor ligand complex. The trajectory loads as expected. I've selected the ligand and I checked the boxes "Only find H-bonds with at lease one end selected" and "Write information to file" . The output hbond.info contains information of a single frame. My question is whether there's a way by means of which information of ALL frames can be printed out. Many thanks and best regards George

3 2

minimization error
by divya neelagiri 20 Dec '11

20 Dec '11

Hello, I got this error when I was trying to minimize a structure. please tell me what went wrong. Executing testchim.py...Opening test1_chimera.mol2...1 model opened Traceback (most recent call last): File "/data/pgm/chimera/chimera_1.2422/share/__main__.py", line 59, in ? value = chimeraInit.init(sys.argv) File "CHIMERA/share/chimeraInit.py", line 298, in init chimera.openModels.open(a, prefixableType=1) File "CHIMERA/share/chimera/__init__.py", line 1253, in open File "CHIMERA/share/chimera/__init__.py", line 746, in _openPython File "testchim.py", line 10, in ? rc("minimize nsteps 70000 stepsize 0.001 interval 100 freeze none nogui true") File "CHIMERA/share/chimera/__init__.py", line 1912, in runCommand File "CHIMERA/share/Midas/midas_text.py", line 60, in makeCommand File "CHIMERA/share/MMMD/ChimeraExtension.py", line 29, in cmdMMMD File "CHIMERA/share/Midas/midas_text.py", line 281, in doExtensionFunc File "CHIMERA/share/Midas/midas_text.py", line 1885, in _getRealKw MidasError: Keyword 'nsteps' doesn't match any known keywords Error while processing testchim.py: MidasError: Keyword 'nsteps' doesn't match any known keywords (see reply log for Python traceback info) This is my program. I tried to execute it from command line using chimera --nogui testchim.py import os import chimera from chimera import runCommand as rc from chimera import replyobj os.chdir("/data2/di/database_build/outputs/outputs_mol2_sdf") fn = "test1_chimera.mol2" rc("open " + fn) rc("minimize nsteps 70000 stepsize 0.001 interval 100 freeze none nogui true") rc("write format mol2 0 min/" + fn) rc("close all") rc("stop now")

3 4

Rotating a model by exactly 90 degrees
by Konrad Hinsen 20 Dec '11

20 Dec '11

Hi everyone, I need to rotate a model by exactly 90 degrees around the Y axis. Mouse precision is not enough. I spent some time searching the command list for something appropriate, but without success. Is there really no way to do this? Thanks in advance, Konrad. -- --------------------------------------------------------------------- Konrad Hinsen Centre de Biophysique Moléculaire, CNRS Orléans Synchrotron Soleil - Division Expériences Saint Aubin - BP 48 91192 Gif sur Yvette Cedex, France Tel. +33-1 69 35 97 15 E-Mail: research AT khinsen DOT fastmail DOT net http://dirac.cnrs-orleans.fr/~hinsen/ ---------------------------------------------------------------------

3 3

Surface not including all molecules?
by Gustaf Olsson 20 Dec '11

20 Dec '11

Hello I'm trying to create a "cavity" model for visualization, I've done it before (a long time ago) and it worked great. But this time I'm having some problems. When trying with all molecules, I got some error regarding the calculation, so I split the model up into pieces and now it almost works. The problem I'm having is when I try creating a surface of one of the molecular species, I only get three "blobs" and not one big surface for all molecules. Any suggestions are most welcome. Don't know if it works, but I'll attach the PDB file for the molecules not being displayed as a surface properly.

4 8

Chimera 1.53 64bit and 12-16-2011 alpha both segmentation fault
by Starr Hazard 16 Dec '11

16 Dec '11

Folks, I have a chimera 1.41 running on an oldercluster head node with RHEL 4 something so its been a while since I did this procedure.... I have a newer cluster based on RHEL 6.1. When I try to launch either 1.5.3 or the alpha daily build I see the initial chimera banner but then only a text message reporting segmentation fault. Should these chimera's crash due to the fact that they are RHEL 5 compatible or is it something in my X11 setup? Will there be a log file anywhere that would provide clues? Where would that file be located? Thanks Starr

2 1

Posing Small Molecules
by Yoshus Kumka 15 Dec '11

15 Dec '11

Hello, I was wondering if there is a way to place in a molecule into a DNA and then minimize that structure either with chimera or in combination with other programs using chimera. For example, on page "1928" of the paper I attached they discuss posing a small molecule in between bases of the DNA. Here's the paragraph and the underlined sentences are of interest to me. If you are wondering why I don't use DeepView for this, my answer is that it is very unstable and crashes more often then producing useful results. Thanks for your help in advance. In a second stage, the crystallographic receptors were replaced by canonical B-DNA with similar sequences, generated with X3DNA.49 Since structural changes in the macromolecule are not allowed during docking, one canoni- cal oligomer was previously modified to include an “inter- calation gap”. In this way, Swiss PDB Viewer was used to pose an ellipticine molecule between two base pairs of canonical DNA, parallel to the base rings. After that, the complex was minimized by the steepest descent method, using the GROMACS package with the GROMOS 53A6 force field. The result was a modified B-DNA in which the base pairs flanking ellipticine were separated by 6.50 Å. Ellipticine was removed from the complex, and the modified B-DNA (see Figure 6B/F) was used as a target for docking with ellipticine. The sequences of the X3DNA generated oligomers are d(CGCAATTGCG)2 (without gap) and d(CG- GCATGCCG)2 (with gap, indicated in bold) .

2 1

problem with match function (superposition)
by Ken Shimo 14 Dec '11

14 Dec '11

Hello, I'm working with evolutionary algorithms applied to protein-protein docking. I'd like to calculate de RMSD between the native complex and the complex achieved with my docking model. For that I was trying to make the superposition of the complexes using the match function through the Chimera command line. I called the function as: match #0 #1 and got the following message: Atoms in each selection must be in the same model I'd like to know what am I doing wrong, or if there is anyway other way to obtain the RMSD and the superposed complexes. I'm using the complex code PDB 1CHO. Thanks for any help, -- Helder Ken Shimo BSc in Biomedical Informatics (University of São Paulo - Brazil) MSc candidate in Bioinformatics (University of São Paulo - Brazil) -- "When I get sad, I stop being sad and be awesome instead." (Neil Patrick Harris as Barney Stinson)

2 1

Error in using Chimera
by Poornima Josyula 13 Dec '11

13 Dec '11

Hi, I installed Chimera 1.5.3 in my system today. I have a Windows 7 64-bit machine with a processor that is, Intel i7-2600, CPU@ 3.40 GHz. After I open the image, I get the following error. I copied this from the debug window of Chimera. * initializing general preferences loading Tix initializing graphics create application loading Pmw creating main window creating menus creating toolbar creating viewer initializing OpenGL initializing preferences initializing dialogs initializing COM initializing extensions Return code: -1073741819 Press return or enter to to exit* I would be glad if anyone can help me fix this issue. Thank you. -- With best regards, Poornima Josyula Ph.D. Scholar Fluid Mechanics Laboratory Dept. of Applied Mechanics IIT, Madras India E-mail: poornima.josyula(a)gmail.com

2 1

Regarding estimation of volume in 2D
by Poornima Josyula 13 Dec '11

13 Dec '11

Respected Sir/Madam, My name is Poornima and I am a Ph.D. student from India. My area of research is Biofluid Mechanics. I am modeling bubble transport in bifurcating microchannels. I am performing 2D simulations for the above problem using a commercial Computational Fluid Dynamics (CFD) software called ANSYS Fluent. ImageJ is currently used for the purpose of post processing. But, I haven't entirely been successful in estimating the volume accurately. Please find attached a snapshot of the simulation. In that snapshot, my region of interest (ROI) is the red colored area whose volume I have to find out. Is there a way Chimera can help me estimate this volume? Please let me know your suggestions. Thank you for your time and patience in reading my mail, despite your busy schedule. Kindly excuse me for any inconvenience caused. Look forward to receive a positive response at the earliest. Have a good day. -- With best regards, Poornima Josyula Ph.D. Scholar Fluid Mechanics Laboratory Dept. of Applied Mechanics IIT, Madras India E-mail: poornima.josyula(a)gmail.com

3 3

how to change the atom type in chimera
by Hina 13 Dec '11

13 Dec '11

Dear All, Can you kindly let me know how to change or edit atom typing in chimera and how to visualize the ligands in the form that double bond single bonds aromatic centers are clearly seen.

2 1

making movie with animation utility
by Bala subramanian 13 Dec '11

13 Dec '11

Friends, I am using chimera build 34374 (downloaded on 9/1/2011). I opened * tools-utilities-Animation* and added a number of scenes. I want to make a movie out of these scenes that were added into the Animation panel. When click *setting-save*. It says the category animation is saved, however i dnt find any animation saved on my system. In brief, i want to make a movie out of the scenes saved in Animation panel, Kindly write me how to do it. Cheers, Bala

2 1

Simple distance to .txt scripting question
by Andrew Hagen 09 Dec '11

09 Dec '11

Hi everyone, I'm trying to write a script that opens a set of .pdbs, measures the distances between certain atoms, and then writes the distance to a text file for later analysis. It's easy enough to do something like... >>> runCommand("distance #0:519.A@NZ #:1.Y@O4") ...which executes the command and appends the info to the reply log ("Distance between #0 LYS 519.A NZ and #5 X01 1.Y O4: 2.33"). What I'd like to do is have that actual measured distance (2.33) be stored in a variable that I could then write to a text file (I know how to do this bit). Thanks for any thoughts! --Andrew -- Andrew Hagen PhD candidate - Plant and Microbial Biology UC Berkeley - Keasling group

2 1

helix anomaly
by larif sofiene 09 Dec '11

09 Dec '11

Greeting sir I'm studying a protein mutation effect using M.Dynamics, and when got results a used chimera to view my protein. in this snapshot http://imageshack.us/photo/my-images/839/errya.jpg/ you can see the first arrow (helix distortion, which predicted as a mutation effect ) and a second arrow showing the discontinuity the helix,where its final turn is replaced by a coil. My question is this coil a secondary structure detection bug in chimera,because when using other tools (pymol, vmd ) they detect this final coil as a helix. thanks

2 1

problem
by Sidra Saleem 09 Dec '11

09 Dec '11

i have downloaded ucsf chimera many times but its not working and giving a window named chimera error the error is unable to contact UCSF computer graphics lab to check for new version(network disconnected) kindly help me urgently

2 1

Axis vs map rotation
by Nicolas Coudray 09 Dec '11

09 Dec '11

Hi, I'm using the "Feature >> Plane" options of the "Volume viewer tool" to show contour lines in planes of density maps. For the plane, there are 3 options: "X-axis", "Y-axis", and "Z-axis". The plane I'm interested in is none of those. I try to rotate the maps, but the X, Y and Z axis are also rotating... Do you know if there's a way to rotate the "axis" and the "map" independently, please? Thanks in advance, Nicolas *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

2 4

Re: [Chimera-users] MD plots
by Elaine Meng 06 Dec '11

06 Dec '11

Hi Luis, This is a new feature added after the 1.5.3 release --- you would need to use a Chimera daily build to try this feature. Daily build download: <http://www.cgl.ucsf.edu/chimera/download.html#daily> List of new features since the 1.5 release series: <http://www.cgl.ucsf.edu/chimera/docs/relnotes/snapshot.html> Enjoy! Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Dec 6, 2011, at 4:33 PM, lecan wrote: > Hi Elaine. > I was following this item that George asked about the plotting of distances in a MD and I got interest in plotting distances as well. But I can not find the plot button in Chimera 1.5.3. Could you please tell where is the plot button in this version? In the MD movie window at the analysis pull down only appear "Calculate occupancy", "Cluster" and "RMSD map". > > Thank you in advance, > > Luis L. > > > On Mon, 5 Dec 2011 13:18:09 -0800, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: >> Hi George, >> The distance command is for showing the distance monitor (dashed line >> and angstrom label). For MD movie plotting, you need only select the >> two atoms and then click the Plot button on the dialog. In the image >> you sent, the dialog is showing an error message that suggests you do >> not have exactly two atoms selected (i.e. either fewer or more atoms >> than two seem to be selected). Try clearing the selection before you >> select the two atoms. Also make sure your selection is really getting >> only two atoms. >> >> For example, realize ":124@H" could select more than one atom. There >> might be residue 124 in both chain A and chain B, and/or in model 0 >> and model 1, etc. >> >> You can see how many atoms are selected, for example by clicking the >> green magnifying glass on the lower right corner of the Chimera window >> to open the Selection Inspector. >> I hope this helps, >> Elaine >> ---------- >> Elaine C. Meng, Ph.D. >> UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab >> Department of Pharmaceutical Chemistry >> University of California, San Francisco >> >> >> >> >> _______________________________________________ >> Chimera-users mailing list >> Chimera-users(a)cgl.ucsf.edu >> http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users >

1 0

Flip maps
by Mario Dejung 06 Dec '11

06 Dec '11

Hi everybody, since the newest version of chimera, it is not longer possible to flip a map via the Voxel Size. In older versions, I could just write 2 2 -2 and my map was flipped. Is there still a way to flip my map within Chimera, or do I have to flip it in a different program and load this new map into chimera. Thanks Mario

2 1

mmView - a tool for mmCIF exploration
by Daniel Svozil 06 Dec '11

06 Dec '11

Dear colleagues, We would like to announce the availability of mmView - the web-based application which allows to comfortably explore the structural data of biomacromolecules stored in the mmCIF (macromolecular Crystallographic Information File) format. The mmView software system is primarily intended for educational purposes but it can also serve as an auxiliary tool for working with biomolecular structures. The mmView application is offered in two flavors: as a publicly available web server http://ich.vscht.cz/projects/mmview/, and as an open-source stand-alone application (available from http://sourceforge.net/projects/mmview) that can be installed on the user’s computer. Petr Cech and Daniel Svozil -- Daniel Svozil, PhD Head of Laboratory of Informatics and Chemistry Institute of Chemical Technology Czech Republic phone: +420 220 444 391 http://ich.vscht.cz/~svozil

1 0

Re: [Chimera-users] MD plots
by George Tzotzos 05 Dec '11

05 Dec '11

Apologies for repeating this. Here are the snapshots On Dec 5, 2011, at 9:58 PM, turk(a)lmb.uni-muenchen.de wrote: > have you tried: > >> distance model_number:residue_A@atom model_number:residue_B@atom > > > George Tzotzos <gtzotzos(a)me.com> wrote : > >> I'm trying to plot the distance between two atoms is a MD trajectory. >> >> I use the command line to select, for example :124@H :121@O >> >> The window in MD Plots fails to show my selection. >> >> Is there something I get wrong? Your help will be much appreciated >> >> Regards >> >> George >> >> _______________________________________________ >> Chimera-users mailing list >> Chimera-users(a)cgl.ucsf.edu >> http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > >

2 2

Re: [Chimera-users] MD plots
by George Tzotzos 05 Dec '11

05 Dec '11

Thanks for this. I tried, still the result is the same. I'm attaching two snapshots in case it helps with the diagnostics. All the best George On Dec 5, 2011, at 9:58 PM, turk(a)lmb.uni-muenchen.de wrote: > have you tried: > >> distance model_number:residue_A@atom model_number:residue_B@atom > > > George Tzotzos <gtzotzos(a)me.com> wrote : > >> I'm trying to plot the distance between two atoms is a MD trajectory. >> >> I use the command line to select, for example :124@H :121@O >> >> The window in MD Plots fails to show my selection. >> >> Is there something I get wrong? Your help will be much appreciated >> >> Regards >> >> George >> >> _______________________________________________ >> Chimera-users mailing list >> Chimera-users(a)cgl.ucsf.edu >> http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > >

1 0

MD plots
by George Tzotzos 05 Dec '11

05 Dec '11

I'm trying to plot the distance between two atoms is a MD trajectory. I use the command line to select, for example :124@H :121@O The window in MD Plots fails to show my selection. Is there something I get wrong? Your help will be much appreciated Regards George

1 0

add custom residues to rotamer library or for swapaa command
by Sabuj Pattanayek 05 Dec '11

05 Dec '11

Hi, How do I add custom residues so that they're usable with swapaa or the rotamer tool? Thanks, Sabuj

3 3

CASTp unable to recognise pdb format
by George Tzotzos 03 Dec '11

03 Dec '11

Hi everybody, I used Modeller to generate a structure which I then saved using Chimera. The CASTp server complains that the structure is not in pdb format. I'm attaching the pdb file to help with the diagnostics. Good weekend to all George

2 2

Cando
by poorvi garg 02 Dec '11

02 Dec '11

Hii.., I have generated the json files by sending it to cando . The files we have generated is opened in UCSF Chimera but I am not able to perform any options or operations of the tool . Could you tell me how to perform operations on bld files of the json file obtained. thanks Regards, Poorvi Garg

2 2

volume calculation
by sdimicco 02 Dec '11

02 Dec '11

Dear Chimera developers, is it possible to calculate the volume of the binding site by the softwere? How can I do it? Thank you in advance. Simone

2 1

Multi-align: retract
by George Tzotzos 01 Dec '11

01 Dec '11

I'd like to retract the previous message. I found a way to edit the protein names. It's a bit roundabout but it works. I saved the alignment in Clustal, opened with an text editor, edited the names and saved. Then I opened the file in Chimera. Regards George

2 1

Multi-align
by George Tzotzos 01 Dec '11

01 Dec '11

Hi everybody, I'm wondering if there's a way to edit the protein names in Multi-align. It seems that protein names are generated automatically. An example is attached. The problem is that in scalable eps, sometimes the names overlap with the line numbers. Reducing the ellipsis in Multi-align preferences truncates the names. Thanks for any suggestions George

1 0

PDB splitting
by Milen Raytchev 30 Nov '11

30 Nov '11

Hi everyone, First, thank you Tom for redirecting me. I am trying to split a long single chain which is contained in a PDB file into several shorter chains, each to be contained in individual PDB files. I have tried Chimera (save as) and PDBEditor.jar software to do that but each approach messes the format somehow and I cannot use it in Chimera later (visualization suffers). Could you recommend me a way to do this splitting properly such that the PDB format is not messed up in the resultant 6 AAA domains and I can use the files further in Chimera. The file is attached if of any use. Thank you in advance and I do appreciate your help. Sincerely, Milen Raytchev

3 2

Ice Crystal Surface
by Nancy 30 Nov '11

30 Nov '11

Hi All, I would like to perform molecular simulations with an ice crystal surface; does anyone know if such a structure file can be obtained online? Thanks, Nancy

2 1

shortest distance
by Bishwajit Das 30 Nov '11

30 Nov '11

How to find out the shortest distance between two atom? help me -- * BISHWAJIT DAS* *+91-9433237920* KOLKATA

2 1

help with error message
by Susan Tsutakawa 28 Nov '11

28 Nov '11

I am opening up a pdb that has been generated after MD simulations. Waters have been removed. I am getting an unusual error. I have two pdb files that were generated similarly, but only one gives me the error. Traceback (most recent call last): File "/Applications/Chimera.app/Contents/Resources/share/chimera/tkgui.py", line 343, in openPath mols = chimera.openModels.open(path, type=ftype) File "/Applications/Chimera.app/Contents/Resources/share/chimera/__init__.py", line 1541, in open models = func(filename, *args, **kw) File "/Applications/Chimera.app/Contents/Resources/share/chimera/__init__.py", line 770, in _openPDBModel errOut=errLog) error: radius must be positive Error reading bfactor-911_changed.pdb: error: radius must be positive File "/Applications/Chimera.app/Contents/Resources/share/chimera/__init__.py", line 770, in _openPDBModel errOut=errLog) If someone can help, I would appreciate it.

2 2

Error in viewing trajectories
by George Tzotzos 28 Nov '11

28 Nov '11

Yesterday I posted a message regarding Chimera issuing error messages on trying to open trajectory files. The error was "TypeError: Attempt to form duplicate covalent bond." I believe that the problem arises from the fact that in preparing the topology files with ANTECHAMBER (tleap) in AMBER, I generated disulfide bonds. My guess is that the problem lies there. Has anyone observed similar behaviour? Best regards George

3 4

EM density fitting
by dhacademic 28 Nov '11

28 Nov '11

Hi, I have an EM density map of a protein, as well as several PDB structures, and want to find the most possible structure with the lowest fitting score. Can anyone tell me know how to calculate the fitting score between the EM-density map and a PDB structure in chimera? Many thanks! Best, Hao

2 1

TypeError: Attempt to form duplicate covalent bond.
by George Tzotzos 27 Nov '11

27 Nov '11

Hi everybody, I'm trying to load a trajectory and I get the error message shown above. I'm attaching the error log in case it's of any help. The problem is that I'm able to load the trajectory in VMD without problems (prefer to work on Chimera, though). Any help on how to troubleshoot this would be most welcome. Have a good weekend George

1 1

3D custom residue labels
by matheus froeyen 22 Nov '11

22 Nov '11

Hi I tried the command mode options to generate a custom hard coded 3D residue label: labelopt resinfo "ARG 167" rlabel offset 0.,0.,20. :151 however get an error in the labelopt command: "resinfo" keyword does not exist (although it is described in the chimera man pages) Then I tried to bypass this by using the atom labeling labelopt info "ARG 167" label offset 0.,0.,20. :151@CA but again no luck, then is displayed the label "none" in the 3D window the default residue labeling works however. How can I use custom labels without using the menus? I use chimera 1.5.3 build 33475 on mac osx. best regards mathy

2 3

2dlabels with solid background
by Tom Goddard 21 Nov '11

21 Nov '11

Hi Gabe, Unfortunately there is no color key command. Here's another creative solution. Make the label background be another label using unicode squares. 2dlabels create b1 text '\u2588\u2588\u2588' color white xpos .5 ypos .7 size 64 This uses the square unicode character, hexadecimal 2588. This solution has the advantage that you can fade out this background together with the label. In order for the text label to appear on top of background label you have to create the text label after creating the background. I'd recommend making all the labels and backgrounds interactive with the 2dlabel dialog and saving them in a session which you use together with your movie script. The script will show and hide the labels that have already been made, sized, positioned. You can cut and paste the unicode square character, say from web page into the 2dlabel dialog. http://en.wikipedia.org/wiki/Box-drawing_characters This solution doesn't make it easy to make an outline around the background box. Elaine suggested that you just make another slightly bigger background in the outline color. That has the problem that the vertical outline edges are thicker than the horizontal ones if the the background is wider than it is tall. To get uniform thickness outline you could make two extra background boxes one square shorter than the normal background and slide them horizontally them to get vertical outline edges of equal thickness. Tom -------- Original Message -------- Subject: 2dlabels From: Gabriel Lander To: Tom Goddard Date: 11/19/11 6:59 PM > Hi Tom, > Again thanks for the volume tracer settings saver - it's been super helpful. > But now I have another question: > I'm currently making a movie that uses lots of labels, and for the most part the current 2dlabels create& acreate commands work really well. But for certain closeup views the text gets lost in the volume density, and I've been trying to figure out a way to get a box to show up behind the labels (like in the attached image). I've figured out I can get something like this if I use the "color key" option, and then offset the text to fit inside the box, but I can't find a "color key" chimera command that I can put it into my movie script. > I tried using the "shape rectangle" command, but it's a bit too tedious to position the rectangles exactly right for all the labels. > Any ideas? > -gabe >

1 1

Calculating and showing the Mass center of Volume Segments
by Schmidt, Claudius 19 Nov '11

19 Nov '11

Hello, I got a volume map that I segmented in 4 parts. Now I wanted to measure how the parts are coordinated to each other. As the Axes/Planes/Centroids menu can only create planes by atoms I wanted to place atoms in the mass- center of each segment. Is there any way to realize that? Or do you have any other way to measure the angles. To explain what I'm trying to measure: Example you have 4 segments, I call them a b c d. I want to measure how the axis that is formed by a and b, forms an angle to c and d, or how ist he angle of the plane formed by a b and c compared to ab and d . All for segments are basically the same objects just turned and rotated. With best regards C. Schmidt

2 5

D-Proline modeling in Chimera
by Raghavender Upadhyayula 18 Nov '11

18 Nov '11

I am using PyMol for modeling a peptide containing D-aminoacid (D-Proline) residue. I could invert the configuration arounf L-Proline to convert it to D-Proline. But, I want the "Phi" of the Proline to adopt a certain value. When i tried using the torsion command by selecting the bond N-CA of the D-Proline residue, there is no change at all. I want the Phi value to change from -60 deg to +60 deg and use this as the model for further analysis. Also, the "Psi" needs to fixed at 120 deg. Is it possible in any way to carry out the same steps and achieve the desired results in Chimera. Any suggestions on how to carry out this would be highly appreciated. -- U.S.Raghavender, PhD Postdoctoral Fellow SRI International 140 Research Drive Harrisonburg, VA 22802 540.438.6643

3 3

Docking box
by George Tzotzos 18 Nov '11

18 Nov '11

Hi everybody, I'm visualising a cavity generated by CASTp. Ideally I'd like to draw and get the coordinates of a box around the cavity to use in docking simulations. Is this possible with Chimera? Your suggestions would be much appreciated. Regards George

4 5

Structure superimposition - RMSD
by Suda Parimala Ravindran 17 Nov '11

17 Nov '11

**Hi all, I have a set of protein structures (about 10) that I need to superimpose. I have used Matchmaker and superimposed by choosing a reference structure. I want to know how to calculate the overall RMSD of the superimposed structures? Where do I lokk out for it? I have checked the Reply log window, but it gets displayed only for some, whereas for others it does not. Please help.. Thanks, -Suda

2 4

Alignment
by bodvael email 15 Nov '11

15 Nov '11

Hi, I have never used Chimera so please bear with me. I have this short peptide sequence (8 aa) that I want to locate in the secondary structure of a protein which I have opened in chimera. Is there a way to highlight the sequence in a particular color in the 3D model and/or only have the aminoacid numbering in this region? Also, I would like to view a linear alignment of the entire protein sequence with my peptide sequence of interest. I was able to do that and see that the peptide sequence falls in a beta-sheet (green color). Is there any way know which strand it is exactly? It is supposed to be in strand 5 but I don't know how to display strand numbers, or verify with certainty that it is indeed strand 5 and not strand 6 for example. Thanks, Bodvael

4 5

van der Waals surface volume
by Jacob Alan Spooner 15 Nov '11

15 Nov '11

Hello chimera-users, I am wondering if and how I can get a volume for the van der Waals surface of my molecule. I know how to generate the vdw surface, and also how the volume and surface area for the solvent excluded surface, however the same method does not seem to work for the vdw surface as it does not show up in my model panel. I tried setting the probe radius of the MSMS to zero but it does not allow this so I am stumped on how I could obtain the volume of my vdw surface. Thanks in advance Jake Spooner

2 1

Chimera issue
by Jason Mears 15 Nov '11

15 Nov '11

I installed Chimera on my linux machine, and there is an issue when I try to open a session (See attached img). It tells me that I need to update the graphics card, but my card is new and I would think is more than sufficient to run Chimera. Any suggestions? Thanks. - Jason -- Dr. Jason Mears Assistant Professor Department of Pharmacology 216-368-3348 jason.mears(a)case.edu <mears.jason(a)case.edu>

2 1

custom label size
by Francesco Pietra 13 Nov '11

13 Nov '11

Hello: Is it possible to increase the letter size of custom labels? I would like to show the residue number only, saving as a stereo pair. As my stereo pair (a protein complex) works nicely for most people only at a reduced size of the figure (14x4 centimeters, or even smaller), larger letter-size is needed for the labels. thanks francesco pietra

2 1

Visualising disulfide bonds
by George Tzotzos 12 Nov '11

12 Nov '11

Hi everybody, I'm trying to find a way to visualise disulfide bonds in AMBER trajectory files to no avail. Any help how to do so will be very much appreciated. Regards George

2 1

Percent Identity for specified parts of a structure
by Victoria James 08 Nov '11

08 Nov '11

Hi there, I don't know if this command already exists, but I can't seem to find it in the Chimera tools or manual. I'd like to be able to calculate the percent identity of specified parts of 2 matched sequences - in my case the individual transmembrane helices of the structures. I wonder if a command already exists or if there is a way of doing this in Chimera without having to make new .pdb files of each of the areas of the proteins that I want to compare? I think it would be a useful command if it does not already exist. Thanks, Vicky

2 2

rmsd
by sdimicco 08 Nov '11

08 Nov '11

Dear Chimera developers, is it possible to calculate the rmsd between two proteins by the softwere? How can I do it? Thank you in advance. Simone

2 1