- Chimera-users - RBVI Mailing Lists

PDB opens distorted
by Francesco Pietra 27 Aug '10

27 Aug '10

Hi: I have drawn a slightly modified small peptide (terminal phenylalanine changed to phenylalanine-amide) with an old, efficient package (PCMODEL). I have drawn from from either amino acid templates or atom-per-atom and then saved as pdb. In case of drawing atom-per-atom, I have edited the residue names, changing UNK to the appropriate standard amino acid name, except phenylalanine-amide, named PHA). Opening the pdb file with an editor, the atoms are often scattered, not sequentially grouped together for a given amino acid. Well, both the non-edited and the edited pdb files open correctly with either PCMODEL of VMD, not with CHIMERA. In the latter case, incorrect bonds between the atoms are seen, and the molecule is compressed. Deleting all CONECT generated by PCMODEL was even worse for CHIMERA. With non peptidic molecules I never went into such troubles using the same packages. Thanks for suggestions how to rearrange the pdb for CHIMERA. francesco pietra

2 1

problems loading .mtz files
by rjoshi＠purdue.edu 25 Aug '10

25 Aug '10

Hi, i am having problems loading electron density files from CCP4 and Phenix. The error message reads "Bad MRC grid size (129737328,-319356160,1145110528)". Please advise. Cheers Rakesh Graduate student Dept.of Biochemistry Purdue University

4 3

volume viewer question
by Boaz Shaanan 25 Aug '10

25 Aug '10

Hi William, The way I go about the sigma level contouring in Chimera, though it's somewhat ham-fisted but perhaps less complicated than Tom's suggestion, is to contour the region of interest at the desired sigma level in Coot or O and then play with the contouring in Chimera until both maps look as similar as possible (the maps rarely look identical for technical differences in the contouring techniques, I think). It works. Cheers, Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel Phone: 972-8-647-2220 ; Fax: 646-1710 Skype: boaz.shaanan‎

2 1

volume viewer question
by William Snee 24 Aug '10

24 Aug '10

Hello, I am trying to make an electron density figure using chimera and need to contour the F0-Fc map to 3 sigma. How can you determine the sigma level displayed with the volume viewer? The levels appear to be different than that observed when using coot or Xtalview. Thank you, William Snee

3 2

Chimera and Sparky
by Hagn, Franz 24 Aug '10

24 Aug '10

Dear all, I am trying to run Chimera connected to Sparky for NMR NOE visualization. I am using the latest Sparky MacOSX distribution (for 10.4) and the last built of Chimera which came out today on a MacOSX 10.6 Intel. When I start Chimera within Sparky, I get a bunch of error messages. Does anybody know which Chimera runs with the latest Sparky? Thanks, Franz -- Franz Hagn, Ph.D. Department of Biological Chemistry & Molecular Pharmacology, Room C1-103 Harvard Medical School 240 Longwood Ave, Boston, MA 02115 Tel: +1(617)432-3211 Fax: +1(617)432-4383 --- Franz Hagn, Ph.D. Department of Biological Chemistry & Molecular Pharmacology, Room C1-103 Harvard Medical School 240 Longwood Ave, Boston, MA 02115 Tel: +1(617)432-3211 Fax: +1(617)432-4383

3 2

ValueError: dimensions too large
by Josh Kacher 24 Aug '10

24 Aug '10

I am trying to use the volume eraser, but whenever I click erase, I get a Chimera Error box come up that says: ValueError: dimensions too large. File "C:\Program Files\Chimera\share\VolumeViewer\volume.py", line 1085, in region_grid m = zeros(shape, d.value_type) Does anyone know how to avoid this? I tried shrinking the volume eraser size. I also tried installing Chimera on a different computer to see if that was the problem, but it still isn't working. Thanks, Josh

3 2

writing MRC maps
by Dougherty, Matthew T 24 Aug '10

24 Aug '10

I have an MRC map that is 800^3. I do a color zone and split the map, generating eight maps, each 800^3. The first of the split maps I throw away, the volume of interest of the other seven maps is 50^3 each. How do I save the seven maps not at 800^3, but reduce their size to 50^3? thanks, Matt

3 2

sausage view
by lalit.deshmukh＠huskymail.uconn.edu 24 Aug '10

24 Aug '10

Hello, Is there anyway to generate a sausage view (see the attached image) by using Chimera? My apologies if I missed something/or this has been discussed before. Thanks in advance, Regards, Lalit

2 1

Ringer: A program to detect molecular motions by systematic X-ray electron-density sampling
by Terry Lang 20 Aug '10

20 Aug '10

The Alber lab at UC Berkeley is pleased to release of the code for Ringer version 1.0 (http://ucxray.berkeley.edu/ringer.htm) which depends on Chimera. Ringer is a program to detect molecular motions by systematic X-ray electron-density sampling. The aim of Ringer is to go beyond static structural snapshots of proteins by uncovering structural ensembles in X-ray electron density. This information can reveal not only which parts of proteins are flexible and which parts are rigid, but it also can define alternate conformations that may be important for function. Alternate conformations of binding sites also may afford additional targets for drug design. The Ringer method is described in Lang et al. /Protein Sci/. 2010 Jul; 19(7):1420-31 <http://www.ncbi.nlm.nih.gov/pubmed/20499387>. An application of Ringer, determining the structural underpinnings of the side chain dynamics critical for the function of the enzyme proline isomerase, was published in Fraser JS et al. /Nature/. 2009 Dec 3;462(7273):669-73 <http://www.ncbi.nlm.nih.gov/pubmed/19956261>. Ringer is freely available to academics. -- PaulaTherese Lang Postdoctoral Scholar Alber Lab, UC Berkeley http://ucxray.berkeley.edu/ringer.htm

1 0

Question regarding Chimera Measurements
by Shahmoradian, Sarah H 19 Aug '10

19 Aug '10

Hello, This is an urgent question and your help would be appreciated. I am trying to find a way to perform measurements in my tomogram volume file (.rec file). I tried using the "Distances" option under Tools --> Structure analysis, but this requires two "atoms." My tomogram does not depict at the atomic resolution and I would like to measure the distance between one area on my tomogram density and another area on the tomogram density. These measurements would be through a 3D section. Could you please let me know how I could do this? Furthermore, I have a question about the scale bar -- when the program generates a default scale bar, how does the program assign the default value to the scale bar size? Does it read the header info from my tomogram file? I am concerned because when I change the label name from Angstrom to nanometers, the scale bar size stays the same-- how then, would I be able to assign an accurate scale bar that would change accordingly with the alterations in scale (Angstrom to nm, etc)? Please let me know if I need to clarify further. Your assistance would be appreciated! Sincerely, Sarah Shahmoradian Molecular Physiology and Biophysics (Baylor College of Medicine) Pre-doctoral fellow, Nanobiology Interdisciplinary Graduate Training Program (Rice University)

2 1

Positioning of water molecules in a protein
by Beale, John 19 Aug '10

19 Aug '10

Is there a way to use Chimera to determine what atoms/groups in a protein are closest to a particular water molecule? I have an x-ray structure that is solvated. I would like to determine the positions of the water molecules in the x-ray structure and compare these to the water molecule positions after molecular dynamics. Thanks! John John M. Beale, Jr., Ph.D. Professor of Medicinal Chemistry and Pharmacognosy Saint Louis College of Pharmacy 4588 Parkview Place Saint Louis, Missouri 63110 314-446-8461 Cell: 314-315-0409 FAX: 314-446-8460 jbeale(a)stlcop.edu<mailto:jbeale@stlcop.edu>

4 3

Stereo monitors
by Jeremy Swan 18 Aug '10

18 Aug '10

Hi all, Any recommendations on stereo monitors for chimera on a pc? Thanks! -Jeremy Sent from iPhone

2 1

2D image contour plot using Chimera
by Yao Cong 16 Aug '10

16 Aug '10

Dear Chimera developer, I was wondering that is there any way that I can use Chimera to do a 2D image contour plot? Do I need some extra plug in or tools? Thanks a lot, Yao ------ Yao Cong, Ph.D. Research Associate, National Center for Macromolecular Imaging, Baylor College of Medicine, One Baylor Plaza, Alkek Building N420-BCM125, Houston, TX 77030 Tel:713-798-6989 Fax:713-798-1625 Email: cong(a)bcm.edu

2 2

representing additional residues over ribbons
by Irene Newhouse 16 Aug '10

16 Aug '10

When I try repr sphere :64 or repr stick :64 over the default presentation of my protein in ribbons [the heme group is in sticks, as are automatically selected residues in close proximity], as suggested in today's user mail, it doesn't work. It only seems to work if all atoms of the protein are displayed. I can only reset the display mode of the residues Chimera has chosen to show in addition to ribbons using these commands on the default mostly-ribbon display. How do I get the protein mostly in ribbons with a few residues in stick or ball & stick? While I haven't worked through the entire tutorials referenced in today's mail, the examples of repr shown early on do not do this; they start from a display of all the protein's atoms. Thanks! Irene Newhouse

2 2

displaying specific residues
by Elaine Meng 16 Aug '10

16 Aug '10

On Aug 12, 2010, at 7:04 AM, Reza Heidari wrote: > How can i display just some of residues (in form sphere) on a protein (in form ball & stick), for example: Trp38, Val66, Ala80. Please help me, thanks a lot. Hi Reza, There are many ways to get the same final result. I will give only two examples here. You may want to look at the "Getting Started" tutorial and other tutorials for more information: <http://www.cgl.ucsf.edu/Outreach/Tutorials/GettingStarted.html> <http://www.cgl.ucsf.edu/chimera/current/docs/UsersGuide/frametut.html> Example 1: Show the command line by choosing from menu: "Favorites... Command Line" If you don't want any ribbon, use command: ~ribbon Show all protein atoms/bonds and hide others with command: show protein (to show ALL atoms/bonds including nonprotein, use command: display) Change style of all atoms/bonds to ball&stick: repr bs Change style of specific residues to sphere: repr sphere :38,66,80 (other commands such as color, display, ... also take these residue lists) Example 2: If you don't want any ribbon, use menu: Actions... Ribbon... hide Show all atoms/bonds with menu: Actions... Atoms/Bonds... show ( If there is water and you want to hide it, menu: Select... Structure... solvent menu: Actions... Atoms/Bonds... hide menu: Select... Clear Selection ) Change style of all atoms/bonds with menu: Actions... Atoms/Bonds... ball & stick Display sequence window with menu: Favorites... Sequence Click on Sequence window top bar, then inside that window, use mouse to choose residue 38; then it will be selected in the main window Change selected residue to sphere with menu: Actions... Atoms/Bonds... sphere Go back to Sequence window, choose next residue, etc. For the future: general questions should go to chimera-users(a)cgl.ucsf.edu (chimera-dev is for programming questions) and include a brief description in the Subject line of the mail. Thanks, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

OpenGL misconfiguration & Nvidia
by Hernando Sosa 14 Aug '10

14 Aug '10

Hi I recently installed the proprietary Nvidia driver in a Linux box (OpenSuse 11.3 64bits) and now every time that chimera start there is a warning dialogue saying that there is an OpenGL misconfiguration detected. If I ignore the warning (press YES to continue) chimera seems to run fine. So my question is how can I either fix the problem or get rid of the warning dialogue? At the terminal the following message is displayed when starting chimera >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Error: API mismatch: the NVIDIA kernel module has version 256.44, but this NVIDIA driver component has version 256.35. Please make sure that the kernel module and all NVIDIA driver components have the same version. <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< I am not sure which one is "this NVIDIA driver component" that I need to fix and why it was not updated when installing the proprietary driver. Thanks System details: Chimera version: production release 1.4.1. (for 64 bit Linux) Card: Nvidia geforce GT 230 Processor: AMD Phenom X6 1090T OS: 64bit Linux OpenSuse 11.3 -- ----------------------------------- Hernando Sosa Dept. of Physiology and Biophysics Albert Einstein College of Medicine 1300 Morris Park Av. Bronx NY 10461 phone (718) 430-3456 FAX (718) 430-8819 email hernando.sosa(a)einstein.yu.edu -----------------------------------

2 1

Re: [Chimera-users] surfnet - separating clefts from cavities
by Elaine Meng 12 Aug '10

12 Aug '10

Hi Irene, Unfortunately surface models aren't directly saved in sessions. Molecular surfaces and volume isosurfaces are effectively saved in that they are regenerated from the underlying atomic or volume data when the session is restored. Some other surface-generating tools are also integrated with sessions, but not Surfnet. <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/sessions.html#whatsaved> I should mention that limitation in the docs. Experiments also reveal that "Surfnet Selection" is ignoring my atom specification of "protein" -- it seems to be using all atoms. However, I can get the desired result by using "Surfnet Interface" instead and specifying "protein" as both the ligand and receptor. This problem with Surfnet Selection is in both the release 1.4.1 and the current daily build, and I will be reporting it as a bug. If the volume method (alternative (B) in my chimera-users message earlier today) had been used, that surface would be restored along with the saved session. There is still the drawback that it "forgets" it has been split and partially hidden. Upon session restore it is regenerated anew and shown in its multiblobbed entirety. Drats, foiled again! Sorry about that, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Aug 12, 2010, at 4:05 PM, Irene Newhouse wrote: > Thanks for your response! I've gone on ahead, manually deleting the clefts. > Also, is there a way to save the computation? When I did a 'save session' > & brought it back, the surfnet calculation wasn't there. The calculation itself > is quick, it's the hiding the bits you don't want to show that's a pain to regenerate...

2 2

surfnet - separating clefts from cavities
by Irene Newhouse 12 Aug '10

12 Aug '10

I've been random-walking my way with surfnet, starting from the stand-alone version. I haven't been able to get the output file I need for displaying via RasMol, & while I was googling for cures to that, I discovered the surfnet plugin to Chimera, hurray. I have a protein with several internal cavities, plus many more surface clefts. Has someone worked out an efficient way to display only the internal cavities? From my previous mucking about with the stand-alone, I already had a 'cavity atoms' pdb-format file which I loaded as model 1 & used that. However, generating the cavity atoms file involved considerable work by hand. At the moment, I can picture splitting the surfaces [using directions in the chimera user archive] & deleting all the surface ones. This is also a fair amount of manual labor - 50 blobs are generated & only 9 are internal. I have other proteins in this family to analyze, & they're probably similar. Thanks for any advice! Irene Newhouse

2 2

Re: [Chimera-users] unsubscribe
by Elaine Meng 12 Aug '10

12 Aug '10

Hi Arne et al., Today there is a glut of messages that had been held up in our system over the last several days. Apologies, and now that we know the problem, it should not recur. Those who wish to unsubscribe can do so at <http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users> Best, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Chimera on Linux
by Jay Brown 12 Aug '10

12 Aug '10

Dear Chimera: I successfully installed Chimera on a Linux machine, and it worked as expected for about an hour. Then it began shutting down any time I tried to rotate a volume image (e.g. emd_1015.map). Nothing comparable happens with the version I have running on a PC. Is there something about Linux I need to know? Thanks. -Jay Brown Jay C. Brown Department of Microbiology University of Virginia School of Medicine 1300 Jefferson Park Ave. Charlottesville, VA 22908 Email: Jcb2g(a)virginia.edu Phone: 434-924-1814 http://people.virginia.edu/~jcb2g/index.htm

3 2

3d chimera viewing with nvidia vision and geforce 220
by William Tieu 12 Aug '10

12 Aug '10

Dear chimera users I am having problems with getting the sequential stereo view on chimera 1.4.1 windows 32bit. The error i'm getting is: Unable to turn on stereo viewing Unable to find hardware stereo support (couldn't choose stereo pixel format Couldn't figure togl widget) I recently obtained a samsung 2233RZ monitor, 3d nvidia vision and using a nvidia geforce 220. My question is, whether the problem is because of using a geforce over a quadro? and whether there is a way to resolve this problem with a geforce card. Or is there another reason for the error message. Thank You William Tieu Department of Chemistry and Physics Adelaide University

2 1

how is the threshold calculated?
by Mitul Saha 12 Aug '10

12 Aug '10

Hi! In Chimera's Volume viewer, how is the default density threshold computed for a given loaded 3D density map? Thanks, MS

2 1

Chimera List posting
by Hagn, Franz 12 Aug '10

12 Aug '10

Franz_Hagn(a)hms.harvard.edu

1 0

Chimera startup options
by Beale, John 12 Aug '10

12 Aug '10

I have a new installation of Chimera on a Linux box. I am working with a protein/nucleic acid complex. When I start the program with "chimera file.pdb" the ribbon representation of the structure is shown. Also, a plank representation of the nucleic acid is shown. I have to hide the ribbon and select "Actions -> Atoms/Bonds -> Show" to see the atoms. Can someone tell me how to change the startup options so that the ribbon and planks are not automatically generated and that the atoms/bonds are shown by default? Thanks! John John M. Beale, Jr., Ph.D. Professor of Medicinal Chemistry and Pharmacognosy Saint Louis College of Pharmacy 4588 Parkview Place Saint Louis, Missouri 63110 314-446-8461 Cell: 314-315-0409 FAX: 314-446-8460 jbeale(a)stlcop.edu<mailto:jbeale@stlcop.edu>

4 3

64-bit Windows version of chimera available
by Greg Couch 11 Aug '10

11 Aug '10

For users with larger datasets, we now have a 64-bit Windows version of chimera available in the daily builds section on the chimera download page, <http://www.cgl.ucsf.edu/chimera/download.html#daily>. While we believe it is bug-for-bug compatible with the other daily builds, please try it out and let us know if you have any problems. - Greg

1 0

Fwd: Re: Question about selection...
by Yasser Almeida Hernández 11 Aug '10

11 Aug '10

It works!!! Thanks a lot, ;) -------- Original Message -------- Subject: Re: [Chimera-users] Question about selection... Date: Tue, 10 Aug 2010 13:49:55 -0500 From: Elaine Meng <meng(a)cgl.ucsf.edu> Reply-To: Chimera BB <chimera-users(a)cgl.ucsf.edu> To: Yasser Almeida Hernandez <almeida(a)cim.sld.cu> CC: Chimera BB <chimera-users(a)cgl.ucsf.edu> Hi Yasser, if you want to generally select all singleton atoms (atoms not bonded to other atoms), you could use this command: sel @/!bonds this is an example of specification by attribute, described here: <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/atom_spec.html#descri…> I hope this helps, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Aug 10, 2010, at 7:49 AM, Yasser Almeida Hernández wrote: > Hi... > The problem is that I have hundreds of pdb files with this format: > four models (or less), where each one is an aminoacid and a single > atom. Mostly, the single atom is an heteroatom and i select it with > :/isHet, but sometimes this atom is a protein atom with the ATOM > field and then, the :/isHet selection doesn't work... > There is some tricky way to select this single atom types (ATOM), > according to the structure of the pdb file...??? > Thanks . ----- Terminar mensaje reenviado ----- -- Yasser Almeida Hernández, BSc Center of Molecular Inmunology (CIM) Nanobiology Group P.O.Box 16040, Havana, Cuba Phone: (537) 214-3178 almeida(a)cim.sld.cu ---------------------------------------------------------------- Correo FENHI -------- Original Message -------- Subject: Re: [Chimera-users] Question about selection... Date: Tue, 10 Aug 2010 13:49:55 -0500 From: Elaine Meng <meng(a)cgl.ucsf.edu> Reply-To: Chimera BB <chimera-users(a)cgl.ucsf.edu> To: Yasser Almeida Hernandez <almeida(a)cim.sld.cu> CC: Chimera BB <chimera-users(a)cgl.ucsf.edu> Hi Yasser, if you want to generally select all singleton atoms (atoms not bonded to other atoms), you could use this command: sel @/!bonds this is an example of specification by attribute, described here: <http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/atom_spec.html#descri…> I hope this helps, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco On Aug 10, 2010, at 7:49 AM, Yasser Almeida Hernández wrote: > Hi... > The problem is that I have hundreds of pdb files with this format: four models (or less), where each one is an aminoacid and a single atom. Mostly, the single atom is an heteroatom and i select it with :/isHet, but sometimes this atom is a protein atom with the ATOM field and then, the :/isHet selection doesn't work... > There is some tricky way to select this single atom types (ATOM), according to the structure of the pdb file...??? > Thanks .

1 0

64-bit Windows version of chimera available
by Greg Couch 10 Aug '10

10 Aug '10

For users with larger datasets, we now have a 64-bit Windows version of chimera available in the daily builds section on the chimera download page, <http://www.cgl.ucsf.edu/chimera/download.html#daily>. While we believe it is bug-for-bug compatible with the other daily builds, please try it out and let us know if you have any problems. - Greg

1 0

64-bit Windows version of chimera available
by Greg Couch 10 Aug '10

10 Aug '10

For users with larger datasets, we now have a 64-bit Windows version of chimera available in the daily builds section on the chimera download page, <http://www.cgl.ucsf.edu/chimera/download.html#daily>. While we believe it is bug-for-bug compatible with the other daily builds, please try it out and let us know if you have any problems. - Greg

1 0

Question about selection...
by Yasser Almeida Hernández 10 Aug '10

10 Aug '10

Hi chimerians... I have this pdb file with some models... MODEL ATOM 1 N ARG 2 75 3.566 -4.680 2.408 1.00 27.73 N ATOM 2 CA ARG 2 75 3.319 -3.762 1.307 1.00 27.44 C ATOM 3 C ARG 2 75 4.363 -2.641 1.381 1.00 27.43 C ATOM 4 O ARG 2 75 4.900 -2.249 2.434 1.00 26.54 O ATOM 5 CB ARG 2 75 1.901 -3.115 1.361 1.00 29.76 C ATOM 6 CG ARG 2 75 0.685 -4.005 1.574 1.00 30.19 C ATOM 7 CD ARG 2 75 1.021 -5.453 1.347 1.00 32.01 C ATOM 8 NE ARG 2 75 1.567 -5.689 0.064 1.00 35.22 N ATOM 9 CZ ARG 2 75 2.123 -6.788 -0.467 1.00 37.99 C ATOM 10 NH1 ARG 2 75 2.301 -7.901 0.253 1.00 37.85 N ATOM 11 NH2 ARG 2 75 2.343 -6.799 -1.796 1.00 37.02 N TER ATOM 1 OE1 GLU 3 561 2.565 -3.602 -1.919 1.00 35.57 O TER ENDMDL MODEL ATOM 1 N ARG B 75 3.153 -4.497 2.431 1.00 25.72 N ATOM 2 CA ARG B 75 2.895 -3.593 1.311 1.00 26.52 C ATOM 3 C ARG B 75 3.980 -2.519 1.148 1.00 26.28 C ATOM 4 O ARG B 75 4.530 -2.055 2.176 1.00 26.18 O ATOM 5 CB ARG B 75 1.566 -2.890 1.541 1.00 30.04 C ATOM 6 CG ARG B 75 0.249 -3.353 1.047 1.00 33.78 C ATOM 7 CD ARG B 75 -0.666 -3.815 2.137 1.00 37.95 C ATOM 8 NE ARG B 75 -0.707 -5.248 2.257 1.00 42.21 N ATOM 9 CZ ARG B 75 -0.886 -6.067 3.286 1.00 44.76 C ATOM 10 NH1 ARG B 75 -1.060 -5.717 4.569 1.00 44.33 N ATOM 11 NH2 ARG B 75 -0.888 -7.403 3.027 1.00 45.78 N TER ATOM 1 OE1 GLU 3 561 2.565 -3.602 -1.919 1.00 35.57 O TER ENDMDL MODEL ATOM 1 N ARG H 75 2.710 -4.027 1.931 1.00 41.50 N ATOM 2 CA ARG H 75 2.475 -2.983 0.948 1.00 38.30 C ATOM 3 C ARG H 75 3.422 -1.785 1.027 1.00 39.34 C ATOM 4 O ARG H 75 3.907 -1.419 2.105 1.00 38.57 O ATOM 5 CB ARG H 75 1.022 -2.521 1.055 1.00 41.90 C ATOM 6 CG ARG H 75 0.718 -1.195 0.370 1.00 48.73 C ATOM 7 CD ARG H 75 -0.639 -0.637 0.779 1.00 50.05 C ATOM 8 NE ARG H 75 -1.742 -1.354 0.145 1.00 56.64 N ATOM 9 CZ ARG H 75 -2.422 -2.353 0.705 1.00 57.10 C ATOM 10 NH1 ARG H 75 -2.121 -2.773 1.928 0.00 56.09 N ATOM 11 NH2 ARG H 75 -3.413 -2.931 0.040 0.00 56.09 N TER ATOM 1 OE1 GLU 3 561 2.565 -3.602 -1.919 1.00 35.57 O TER ENDMDL MODEL ATOM 1 N ARG K 75 2.718 -3.987 1.949 1.00 40.34 N ATOM 2 CA ARG K 75 2.510 -2.935 0.974 1.00 40.91 C ATOM 3 C ARG K 75 3.439 -1.730 1.052 1.00 41.44 C ATOM 4 O ARG K 75 3.779 -1.257 2.143 1.00 44.22 O ATOM 5 CB ARG K 75 1.045 -2.492 0.991 1.00 46.88 C ATOM 6 CG ARG K 75 0.759 -1.285 0.109 1.00 57.01 C ATOM 7 CD ARG K 75 -0.722 -0.981 -0.005 1.00 64.03 C ATOM 8 NE ARG K 75 -0.939 0.301 -0.673 1.00 70.73 N ATOM 9 CZ ARG K 75 -0.576 1.482 -0.173 1.00 75.39 C ATOM 10 NH1 ARG K 75 0.025 1.563 1.009 1.00 75.51 N ATOM 11 NH2 ARG K 75 -0.798 2.594 -0.862 1.00 77.70 N TER ATOM 1 OE1 GLU 3 561 2.565 -3.602 -1.919 1.00 35.57 O TER ENDMDL How can i select the 1 OE1 GLU atom in each the model? Any hint... Thanks... ;) -- Yasser Almeida Hernández, BSc Center of Molecular Inmunology (CIM) Nanobiology Group P.O.Box 16040, Havana, Cuba Phone: (537) 214-3178 almeida(a)cim.sld.cu ---------------------------------------------------------------- Correo FENHI

2 3

64-bit Windows version of chimera available
by Greg Couch 10 Aug '10

10 Aug '10

For users with larger datasets, we now have a 64-bit Windows version of chimera available in the daily builds section on the chimera download page, <http://www.cgl.ucsf.edu/chimera/download.html#daily>. While we believe it is bug-for-bug compatible with the other daily builds, please try it out and let us know if you have any problems. - Greg

1 0

Re: [Chimera-users] Ramachandran Plots
by Conrad Huang 10 Aug '10

10 Aug '10

Actually, you can now bring up a Ramachandran plot via the user interface in the Chimera daily build (http://www.cgl.ucsf.edu/chimera/download.html#daily) If you pop up the Model Panel (Favorites -> Model Panel), there should be a "Ramachandran plot..." button that displays a plot for each selected model. This is still an early implementation, so please send us bug reports and suggestions. Conrad On 8/9/2010 5:53 PM, Daniel Gurnon wrote: > Conrad, This script isn't working for me- I get the following error: > > Traceback (most recent call last): > File "C:\ProgramData\Chimera\ram3.py.txt", line 2, in <module> > from Plotdialog import PlotDialog > ImportError: No module named Plotdialog > > > Can you tell me how to make it work? > Thanks > Dan > > > On Mon, Jun 7, 2010 at 1:55 PM, Conrad Huang <conrad(a)cgl.ucsf.edu > <mailto:conrad@cgl.ucsf.edu>> wrote: > > It's been on our list for a while now. In the mean time, try out > this script. It generates a Ramachandran chart for the first open > molecule. > > Conrad > > > On 6/3/10 8:55 AM, James Nettles wrote: > > Does Chimera do Ramachandran Plots and I'm missing something > obvious? > > I like doing just about everything else in Chimera :-) > > Thanks, > > Jim _______________________________________________ > Chimera-users mailing list > Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users > > > _______________________________________________ > Chimera-users mailing list > Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users > > > > > -- > ____________________________ > > Daniel Gurnon, Ph. D. > Assistant Professor of Chemistry > DePauw University > Greencastle, IN 46135 > > p: 765-658-6279 > e: danielgurnon(a)depauw.edu <mailto:danielgurnon@depauw.edu>

1 0

Fitting with constrained motion
by Tom Goddard 06 Aug '10

06 Aug '10

Hi Julio The Chimera fitting code does a full 3-degree-of-freedom rotational search. It cannot search fewer rotational degrees of freedom. It would be nice to adapt the code to be able to consider only rotations about an axis. The needed changes would be in the FitMap Chimera module not the fitnogui.py script. Optimizing using only two rotational degrees of freedom that are Euler angles seems like a bizarre case and we are not likely to ever handle that. Please post future questions to the chimera-users mailing list so others can answer and read the answers. Tom > Hi Tom, > > Sorry to bother you again. Is there a way fix one of the Euler angles > for the fitting? Since we have a small theta, we would like to fix > psi=0, and optimize on phi and theta only, plus the translations. I'm > using the fitnogui script. > > Many thanks, > Julio > > > On Jul 28, 2010, at 5:13 PM, Tom Goddard wrote: > >> >> Hi Julio, >> >> I guess you are using the fitnogui.py script. >> >> >> http://plato.cgl.ucsf.edu/trac/chimera/attachment/wiki/Scripts/fitnogui.py >> >> The parameters are right near the top -- ijk_step_size_min is the one >> you're interested in. >> >> The initial contour level is set as described in the documentation: >> >> http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/volumeviewer/volum… >> >> The "volume" command can set the contour level: >> >> volume #0 level 27.6 >> >> Tom >> >>> Hi Tom, >>> >>> Thanks again. Editing the line of code would be perfect for us, >>> since we are calling Chimera from our program with the "nogui" >>> option. Could you point me the place where I need to change that 0.01? >>> >>> What happens with the contour level when I'm calling Chimera in that >>> way (nogui)? Can I similarly set it somewhere in the code? Or with >>> an option in the command line? >>> >>> Best, >>> Julio >>> >>> >>>

1 0

UCSF Chimera Visual Identity
by Jessen Vernon Bredeson 06 Aug '10

06 Aug '10

To whom this may concern, I downloaded the UCSF Chimera 1.4.1 update for Mac OS X and noticed that the Chimera symbol had a grey outline around it, likely due to multiple alpha channels in rendering the image into .ICNS format, so I recomposed the image in higher quality and it is attached below. Also below is an accompanying symbol for MS Windows format (.ICO). These icons are free of charge, keep up the good work. Jessen Bredeson Fourth-Year Genetics, Genomics & Development Molecular and Cellular Biology University of California, Berkeley

2 2

model panel: add/edit note
by Dougherty, Matthew T 03 Aug '10

03 Aug '10

Is there a command to be able to modify notes on the model panel? If not, it would a useful addition when creating a command file to load in & color datasets.

3 3

Small molecules and antechamber
by Jon Rumbley 02 Aug '10

02 Aug '10

I have several small organic molecules constructed in ChemDraw and converted in Chem3D to .mol2 files. I can open them in Chimera but cannot seem to add charges to. I was simply using the add charge menu commands and AM1-BCC and assuming the structures would be read as nonstandard but antechamber reports an error with residue ****. The error log has no real indication of what the trouble might be. Are there additional steps I must take before assigning charges? The structures already have hydrogens added. An example .mol2 file is below: @<TRIPOS>MOLECULE **** 44 45 1 0 0 SMALL USER_CHARGES @<TRIPOS>ATOM 1 C -2.8306 2.5311 -0.9622 C.2 1 **** 0.0000 2 C -2.8728 1.1718 -1.0363 C.2 1 **** 0.0000 3 C -4.0552 0.3840 -0.9622 C.1 1 **** 0.0000 4 C -1.6082 0.4134 -1.1450 C.2 1 **** 0.0000 5 N -5.0052 -0.2769 -0.8917 N.1 1 **** 0.0000 6 O -1.8883 -0.9222 -1.2800 O.3 1 **** 0.0000 7 O -0.4722 0.8459 -1.1451 O.2 1 **** 0.0000 8 C -0.8034 -1.8901 -1.1282 C.3 1 **** 0.0000 9 C -0.3965 -1.8485 0.3585 C.2 1 **** 0.0000 10 C -1.4383 -3.2075 -1.5077 C.3 1 **** 0.0000 11 N 0.6925 -2.6041 0.6991 N.am 1 **** 0.0000 12 O -1.0062 -1.1536 1.1745 O.2 1 **** 0.0000 13 C 1.2426 -2.6055 2.0833 C.3 1 **** 0.0000 14 C 2.4273 -3.5343 2.1380 C.ar 1 **** 0.0000 15 C -3.9592 3.4353 -0.8741 C.ar 1 **** 0.0000 16 C -3.7802 4.6664 -0.1923 C.ar 1 **** 0.0000 17 C -4.8234 5.5702 -0.0757 C.ar 1 **** 0.0000 18 C -6.0611 5.2454 -0.6673 C.ar 1 **** 0.0000 19 C -6.2633 4.0447 -1.3692 C.ar 1 **** 0.0000 20 C -5.2063 3.1490 -1.4690 C.ar 1 **** 0.0000 21 O -7.0408 6.1768 -0.5154 O.3 1 **** 0.0000 22 C 3.5525 -3.2801 1.3388 C.ar 1 **** 0.0000 23 C 4.6333 -4.1642 1.3545 C.ar 1 **** 0.0000 24 C 4.6017 -5.2952 2.1768 C.ar 1 **** 0.0000 25 C 3.4888 -5.5395 2.9865 C.ar 1 **** 0.0000 26 C 2.3994 -4.6635 2.9668 C.ar 1 **** 0.0000 27 H -1.8332 3.0176 -0.9495 H 1 **** 0.0000 28 H 0.0351 -1.5845 -1.7993 H 1 **** 0.0000 29 H -0.6942 -4.0150 -1.5686 H 1 **** 0.0000 30 H -1.9272 -3.1457 -2.4932 H 1 **** 0.0000 31 H -2.2150 -3.5214 -0.7935 H 1 **** 0.0000 32 H 1.1669 -3.2048 0.0167 H 1 **** 0.0000 33 H 1.5395 -1.5662 2.3712 H 1 **** 0.0000 34 H 0.4439 -2.9024 2.8058 H 1 **** 0.0000 35 H -2.8085 4.9012 0.2576 H 1 **** 0.0000 36 H -4.7042 6.5169 0.4530 H 1 **** 0.0000 37 H -7.2285 3.8279 -1.8322 H 1 **** 0.0000 38 H -5.3406 2.2282 -2.0442 H 1 **** 0.0000 39 H -7.9024 5.8992 -0.9622 H 1 **** 0.0000 40 H 3.5844 -2.3950 0.7014 H 1 **** 0.0000 41 H 5.5045 -3.9710 0.7250 H 1 **** 0.0000 42 H 5.4465 -5.9867 2.1870 H 1 **** 0.0000 43 H 3.4659 -6.4183 3.6333 H 1 **** 0.0000 44 H 1.5299 -4.8643 3.5946 H 1 **** 0.0000 @<TRIPOS>BOND 1 1 2 2 2 1 15 1 3 1 27 1 4 2 3 1 5 2 4 1 6 3 5 3 7 4 6 1 8 4 7 2 9 6 8 1 10 8 9 1 11 8 10 1 12 8 28 1 13 9 11 1 14 9 12 2 15 10 29 1 16 10 30 1 17 10 31 1 18 11 13 1 19 11 32 1 20 13 14 1 21 13 33 1 22 13 34 1 23 14 22 2 24 14 26 1 25 15 16 2 26 15 20 1 27 16 17 1 28 16 35 1 29 17 18 2 30 17 36 1 31 18 19 1 32 18 21 1 33 19 20 2 34 19 37 1 35 20 38 1 36 21 39 1 37 22 23 1 38 22 40 1 39 23 24 2 40 23 41 1 41 24 25 1 42 24 42 1 43 25 26 2 44 25 43 1 45 26 44 1 Thanks for any help you can provide. Dr. Jon N. Rumbley Assistant Professor Dept. of Pharmacy Practice and Pharmaceutical Sciences University of Minnesota-Duluth 127 LSci 1110 Kirby Dr. Duluth, MN 55812 Phone: 218-726-6047 email: jrumbley(a)d.umn.edu

2 1

model panel: color patch
by Dougherty, Matthew T 31 Jul '10

31 Jul '10

using a command or python file, how do I set the color patch on the model panel?

2 1

Fwd: Visualizing inertia axes as arrows
by Eric Pettersen 31 Jul '10

31 Jul '10

Hi Miguel, Thanks for the corrections! I just fired that one off without testing it. I thought there might be an error or two. I'm glad you find it useful after fixing it. --Eric Begin forwarded message: > From: Miguel Ortiz Lombardía <miguel.ortiz-lombardia(a)afmb.univ-mrs.fr> > Date: July 31, 2010 1:39:33 AM PDT > To: Eric Pettersen <pett(a)cgl.ucsf.edu> > Subject: Re: [Chimera-users] Visualizing inertia axes as arrows > > Hi Eric, > > Thanks for this useful script! > > I think I found two errors though: >> >> from chimera.selection import currentAtoms, numpyArrayFromAtoms > > should be: > > from chimera.selection import currentAtoms > from chimera import numpyArrayFromAtoms > > and: > >> for val, vec in zip(vals, vecs): >> bildString += ".arrow %g %g %g %g %g %g .1 .2 .9\n" % ( >> centroid[0], centroid[1], centroid[2], >> centroid[0] + val[0] * vec[0], >> centroid[1] + val[1] * vec[1], >> centroid[2] + val[2] * vec[2]) > > has to be: > > for val, vec in zip(vals, vecs): > bildString += ".arrow %g %g %g %g %g %g .5 1. .9\n" % (centroid[0], > centroid[1], centroid[2], centroid[0] + val * scale * vec[0], > centroid[1] + val * scale * vec[1], centroid[2] + val * scale * > vec[2]) > > (you can ignore the scale thing, that's simply a 50/max(vals) > correction > so the longest axis is 50 A) > > Best, > > > -- > Miguel > > Architecture et Fonction des Macromolécules Biologiques (UMR6098) > CNRS, Universités d'Aix-Marseille I & II > Case 932, 163 Avenue de Luminy, 13288 Marseille cedex 9, France > Tel: +33(0) 491 82 55 93 > Fax: +33(0) 491 26 67 20 > e-mail: miguel.ortiz-lombardia(a)afmb.univ-mrs.fr > > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. >

1 0

Visualizing inertia axes as arrows
by Jozef Lewandowski 30 Jul '10

30 Jul '10

Hi everybody, Lately, I have been using "measure inertia" command a lot. For my purposes I needed to visualize the inertia axes as arrows instead of the default ellipsoid. I used the vectors from the reply log to write BILD files defining the arrows for the inertia axes. Is there an easy way to script just that? Or differently, is there an easy way to visualize as arrows inertia axes for peptide planes in a protein? Any tips would be appreciated. Thanks, Józef

2 1

Re: [Chimera-users] about transformation matrix
by Tom Goddard 28 Jul '10

28 Jul '10

Hi Julio, I guess you are using the fitnogui.py script. http://plato.cgl.ucsf.edu/trac/chimera/attachment/wiki/Scripts/fitnogui.py The parameters are right near the top -- ijk_step_size_min is the one you're interested in. The initial contour level is set as described in the documentation: http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/volumeviewer/volum… The "volume" command can set the contour level: volume #0 level 27.6 Tom > Hi Tom, > > Thanks again. Editing the line of code would be perfect for us, since we are calling Chimera from our program with the "nogui" option. Could you point me the place where I need to change that 0.01? > > What happens with the contour level when I'm calling Chimera in that way (nogui)? Can I similarly set it somewhere in the code? Or with an option in the command line? > > Best, > Julio > > > > Hi Julio, > > The details of the fitting algorithm are given in the User's Guide. > > > http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/fitmaps/fitmaps.ht… > > You should definitely read that if you want the best understanding. But > the brief answers to your questions are that the convergence criteria > looks for optimization steps of less than 0.01 grid index to decide > convergence. The user interface does not allow you to change the 0.01 > grid index criteria -- it could be done by editing a line of Python. > The default settings do mask using the contour level of the fit map as > an outer boundary. So that level is important. > > Tom > > >

2 1

Camera parameters
by Tom Goddard 27 Jul '10

27 Jul '10

Hi Matt, The Chimera camera always points along the negative z-axis. The positions of the models are moved/rotated to get different view-points. Do you mean you want camera location (x,y,z) and horizontal angular field of view to the edges of the window (for perspective projection)? I know how to get at these using Python code, but I'm not sure if any Chimera commands report those values. Also I don't know if that info makes its way into X3D or VRML exported from Chimera. Greg Couch would know these answers. He is at SIGGRAPH this week. A quite gruesome way to get the parameters is to find them in the Chimera session file. grep formattedPositions mysession.py formattedPositions = {'p2': (0.3954088241213373, 18.749999499320985, (14.059999585151672, 7.399999618530273, 8.628906249999993), (36.02048479676247, -18.762672296762467), 8.62890625, {(0, 0): ((13.338430482851305, 2.7738552720503122, 6.309792459458727), (0.3889244976446376, 0.8937166155966246, 0.22362545950400858, 33.757570197325826))}, {(0, 0, 'Volume'): (False, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, False, 5.0)}, 4, (29.312384727061698, 10.919780805124898, 8.628906249999993), False), 'p1': (1.0, 18.749999499320985, (14.059999585151672, 7.399999618530273, 8.62890625), (36.02048479676247, -18.762672296762467), 8.62890625, {(0, 0): ((-1.913954659058722, -0.7459259145443079, 6.309792459458727), (0.3889244976446376, 0.8937166155966246, 0.22362545950400858, 33.757570197325826))}, {(0, 0, 'Volume'): (False, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, False, 5.0)}, 4, (14.059999585151669, 7.399999618530277, 8.628906249999993), False)} This is pretty messy and the values depend on which Chimera version saved the file. The values are defined by Python code chimera/share/Midas/__init__.py in the _savePosition() routine: return ( viewer.scaleFactor, viewer.viewSize, cam.center, cam.nearFar, cam.focal, xforms, clips, om.cofrMethod, cofr, viewer.clipping ) If you want a Python script to simply dump the camera positions for all savepos positions I can provide that. Tom > Hi Tom, > > I am creating a workaround for my graphics problem. What I have done in the past is to create a VRML file from Chimera export, extract the openGL camera parameters using a text editor, start up Amira, using TCL I would recreate the same camera view within Amira. At this point I could splice animation clips made by Chimera& Amira using Final Cut Pro. > > It has been a while since I have done this. I am now looking at the exported VRML files and they are lacking the camera info. > > Is there a command I can use to get the camera parameters for the savepos keyframes? > > thanks, Matt > >

2 2

coordinate transformation
by Dougherty, Matthew T 27 Jul '10

27 Jul '10

I was trying to locate details on maxtrix, coordinate transformations & scenegraph, relative to camera transformations.

2 1

about transformation matrix
by Kovacs, Julio A 27 Jul '10

27 Jul '10

Hi, I am doing fitting of two maps and am getting different values of the transformation parameters: the ones given in the window where I specify the options (these seem to be correct), and those given by using the command "matrixget" --- these give a very large translation vector, and moreover, I don't see any relation between that vector and the correct translation. Also, could you tell me what is the order used in Chimera: rotation, then translation? or translation, then rotation? Thank you very much. Julio Kovacs

2 2

Problem
by Reza Heidari 27 Jul '10

27 Jul '10

2 1

Nvidia 3D Vision
by "Christoph Höglinger" 27 Jul '10

27 Jul '10

Dear Chimera developers, I just bought the Nvidia 3D Vision Kit, because i was interested in the 3D Visualisation of it. First I tried it with the latest drivers from Nvidia's Homepage. (Quadro Driver Version: 258.49 & 3Dvision 258.49 ). I changed the Settings in the NV Control Panel (for Stereo output). Sequential Stereo worked fine in an other 3D Application. But when i change the view settings in chimera (sequential Stereo) i get that error: (After The Error MSG ist Quits and displays the Exit Code 3) Runtime Error! Program: C:\Program Files\Chimera\bin\pythonw.exe This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. Then i was looking for hints to solve that problem i found following article. http://plato.cgl.ucsf.edu/pipermail/chimera-users/2010-May/005173.html There you mentioned that its probably a problem with the "new" drivers (197.XX). So I installed the driver that had been recommended by you. (Quadro Drv. 191.87 + 3D Vision 191.00). The Problem was that this 3D Vision driver won't support my LCD, its an Acer GD245HQ). I have installing it "manually" it won't activate the shutter glasses when Sequential Stereo is switched "on" in chimera (Shutter doesnt even work in games or any other Application) That means that the 3D-Vision driver is to blame. 197.03 Will recognize my LCD, but that won't work with chimera. Tried also QDRO 191.87 & 3DVision 258.49 (but theres no way to run the 3DVision Setup) Have you got an idea on how to fix that Problem? That would be really great! This is my System Configuration: Intel Pentium E5200 @ 3.5GHz PNY Quadro FX 570 4GB Ram Windows 7 64 Bit Acer GD245HQ Thank you so much for your help! Best regards, Christoph -- GMX.at - Österreichs FreeMail-Dienst mit über 2 Mio Mitgliedern E-Mail, SMS & mehr! Kostenlos: http://portal.gmx.net/de/go/atfreemail

3 4

Directly representing ellipsoids
by Thomas Ouldridge 26 Jul '10

26 Jul '10

Hi, I'm afraid I'm not a crystallographer/protein simulator, and so this question might seem quite naive. I run coarse-grained simulations, and I would like to represent the objects as ellipses in chimera. I have the position (which I am able to use) and the orientation that I would like my ellipses to take, encoded as a matrix relative to (x,y,z) cartesian coordinates. This matrix gives me the principal axes and radii of the ellipse. As I understand, Chimera is designed to display a "Thermal ellipsoid" - I would like this ellipsoid to have the axes and radii given by my matrix. However, it seems that the input (via pdb format files) is interpreted as an "anisotropic temperature factor", and I can't find a way to convert my matrix into the anisotropic temperature factor (I tried some papers online but they seemed to be talking in terms of transformations between lab frame and crystallographic frames, but I cannot see how that applies - what is my crystallographic frame?). In short, is there a way to convert my matrix into the "anisotropic temperature factor" representation so that Chimera can read it and convert it back? I did try just plugging in the matrix elements to the PDB file but got some weird ellipsoids out. Any help would be gratefully appreciated, Tom

2 1

Transparency doesn't look right
by Tom Goddard 26 Jul '10

26 Jul '10

Hi Mitalee This is a Chimera limitation. Two or transparent models will not be shown correctly. Transparency works correctly only when at most one model is transparent. You have the volume data displayed in "solid" style which is a kind of transparent rendering, and you have a surface model which is transparent. How defective the transparency looks depends on the order the models were opened in Chimera (or maybe it depends on which has higher model id number, don't recall). In any case, both orders look seriously wrong. If you reverse the order of opening your two models I think your surface will remain totally invisible until it becomes 0% transparent when it will suddenly appear. This limitation is a rather fundamental design problem in Chimera. Chimera draws the models one at a time. A model that is drawn after another model can only appear in front of the first model. Chimera first draws all opaque models, then draws all transparent models. If you look at the termite gut video I made http://www.cgl.ucsf.edu/chimera/animations/movies/termitegut.mov where surfaces fade in you'll see at the start of the fade in, a black blob suddenly appears representing the object. This is the same bad behavior you see in your case, but your surface is white (the background color) and is in front of the volume data making it look especially bad. This problem has arisen many times in, especially in movie making where transparency is used to fade objects in and out. I have an idea for a solution although it is not yet implemented. But we just hired Daren Weber to work on animation improvements in Chimera and perhaps he can try this. The idea is to enhance the movie command to add a "crossfade" option. You would display the volume, then use a command like "movie crossfade 25" then show the opaque surface. The command would take the image right before the command was issued and the next image and linearly blend them over 25 frames. This would be useful for many fade scenarios. It is limited in that it won't be able to have models moving and a fade occurring at the same time since that is not simply a linearly blending of two images. I'll see if Darren is interested in trying to add this if you are interested. If you do not want to wait for this, another option is to record your movie without the fade -- just have the surface suddenly appear. Then drop the movie into an video editing program like Final Cut and add the crossfade with that software. Tom > Hi Tom, > > I was using the surft command, trying to make a segment appear inside of a > cmap file. Basically, I have a cmap file open and visible, and I want to > show the segmented cell appear slowly. My problem is that when I set the > transparency of the segmented cell to 100 (i.e. surft 100 #0), it doesn't > exactly become transparent, or what I thought would be transparent. When I > enter this command, it makes the entire image transparent at that point > (so the shape of the segmented cell is preserved and matches the > background. I've attached an image of what I got as a result. Is there a > way to make preserve the cmap image and just make the segmented cell > overlay onto it without completely "removing" the section where the > segmented cell will appear? > > Thanks, > Mitalee

1 1

Question about match
by Ibrahim Moustafa 26 Jul '10

26 Jul '10

Dear Chimera developers, I have a question related to the ³match² command. I wanted to align 4 related proteins and I used the default in the match menu. The alignment is fine; but I have a question about the output in the reply log. In the log it says: ³evaluating superpositions across all 439 fully populated columns in the final alignment² Then the pair-wise RMSD between the different pairs (range from 0.7 1.6 A) are given. What is meant by 439 fully populated columns? Does it mean 439 C-alpha atoms for those amino acids in the fully occupied aligned columns? I¹m asking because I want to report these values of RMSD and I want to be more specific and state the number of atoms over which the RMSD value is being reported. P.S. The proteins vary in their length (461,462,460 and 470). Thanks for your reply in advance, Ibrahim

2 2

protonated carboxyl group
by Elaine Meng 26 Jul '10

26 Jul '10

> right now I'm getting stuck on things like adding hydrogens (e.g. I would like a -COOH and not -COO group) Hi, We may make some changes to make this easier in the future, but for now here is the procedure: (a) change the atom type of the oxygen to be protonated to O3. This could be done by Ctrl-clicking to select that oxygen and then using the command: setattr a idatmType O3 sel (b) add hydrogens with command "addh" or the AddH tool (c) if this is in a "standard residue" (amino acid ASP or GLU) and you are also going to assign charges in Chimera, you will also need to adjust the names of the atoms so they will receive the correct Amber partial charge values. If the residue is ASP, you will need to make sure that the sidechain oxygen without the hydrogen is named OD1, the one with the hydrogen is named OD2, and the hydrogen itself is named HD2. If GLU, it is analogous except the names contain E instead of D. Show atom labels for that residue to see the current names (e.g. to show atom labels for residue 9 in chain A, use command: lab :9.a). To rename an atom, you could select it and use a command something like: setattr a name OD1 sel Once the names are correct, charge assignment will give you the correct Amber values for residue ASH (protonated ASP) or GLH (protonated GLU). I hope this helps, ELaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

map normalization; ccp4 file saving
by Jean-Paul Armache 26 Jul '10

26 Jul '10

hello, i would like to pose two questions: 1. is there a way of adjusting one map so that it's adjusting to the levels of another map? i believe it should be achievable with "vop" command, but i am not sure whether the vop scale is the appropriate thing to use. 2. would it be possible to save the output map as a ccp4 map? currently you're permitting mrc saving, which is not that very much different from ccp4, so i was wondering if it was possible to add this feature. the difference is large enough so that coot does not allow for map loading of mrc files. best regards, jean-paul

2 1

Problem
by Reza Heidari 25 Jul '10

25 Jul '10

1 0