- Chimera-users - RBVI Mailing Lists

Open file interface suggestion
by Dan Kool 15 May '17

15 May '17

Hello, I have been using your software for a while. I love the features and general user interface. There is one thing that drives me nuts, though. The side-by-side list interface when I go to open files.A window-based one would be much easier. Is there an option for that that I am not seeing? If not, I suggest adding the option. Thank you for your software! Best, Dan ---------------------------------------------------- Daniel Kool Graduate Research Assistant, Jernigan Lab Bioinformatics and Computational Biology Iowa State University *kool(a)iastate.edu <kool(a)iastate.edu>*

3 3

error or bug
by Arthur Szabo 15 May '17

15 May '17

Continuing my earlier question. I tried the suggestions sent to me neither split nor surfcat seemed to work. After some attempts I received this window and reported the bug [cid:image001.png@01D2CD74.26A7D780] I then tried to use molmap and I did get a surface and saw how by moving the cursor in the molmap window I could get the surface to progressively disappear leaving the selected domains that were colored previously. The surface was for the entire protein, one of the models #0. I could also change the surface color. Then I went looking at some of the tabs on the molmap window and cannot describe the sequence, but ended up with another window that I eventually found out was for visualizing Cryo EM maps. Now I have a surface that is multicolored and looks like jelly beans. Somehow perhaps by selecting one of the models from the command lines, (#0) I was able to pull out a surface of the entire molecule, rotate it etc, and progressively remove the surface, til the selected domains remained. Stuck!!! This is one model: [cid:image003.png@01D2CD79.3D09E040] [cid:image004.jpg@01D2CD79.3D09E040] HERE IS ANOTHER which is #1 or #2 [cid:image005.jpg@01D2CD79.3D09E040] [cid:image006.png@01D2CD79.3D09E040] Arthur Szabo

2 4

Visualizing specific atoms in autodock-vina output
by Francesco Pietra 15 May '17

15 May '17

I am trying to investigate the protein surrounding a docked (autodock-vina, alpha chimera 1.1 build 40505 linux 64) ligand. I am interested in the environment of specific atoms of the ligand. With command sel #1.1@N z<5 I can investigate the protein at 5A from BOTH nitrogen atoms of model 1.1. How to select one of the two existing N atoms in the ligand? Same questions for other ligand atoms (there are many O-atoms) Is that possible without elaborating the vina output? thanks francesco pietra

4 8

Saving multiscale models only?
by Healey, Joe 12 May '17

12 May '17

Hi Chimera team, Is it possible to save a multiscale model without the atomic coordinates that generated it in the first place? I've seen that the multiscale models can be saved within Scenes, but I'd like to save it as a 'structure' such that I can continue to use it in subsequent sessions. At present, when I close the PDB model that generated the MultiScale map, the map also closes. Thanks, Joe Joe Healey M.Sc. B.Sc. (Hons) MSRB PhD Student MOAC CDT, Senate House University of Warwick Coventry CV47AL Mob: +44 (0) 7536 042620 | Email: J.R.J.Healey(a)warwick.ac.uk Jointly working in: Waterfield Lab<http://www2.warwick.ac.uk/fac/med/research/tsm/microinfect/staff/waterfield…> (WMS Microbiology and Infection Unit) and the Gibson Lab<http://www2.warwick.ac.uk/fac/sci/chemistry/research/gibson/gibsongroup/> (Warwick Chemistry) Twitter: @JRJHealey<https://twitter.com/JRJHealey> | Website: MOAC Page<http://www2.warwick.ac.uk/fac/sci/moac/people/students/2013/joseph_healey> | ORCID: orcid.org/0000-0002-9569-6738

2 1

surface transparency animation
by esserlo＠helix.nih.gov 12 May '17

12 May '17

Hi, I am trying to animate a transition of a surface from 100% transparent to opaque. In a test (the real case is more complicated) I did this: open 1hen.pdb # Lysozyme test # Chimera shows a blue ribbon model on gray background surface #0 scolor #0 color green # chimera shows a green surface over a (now invisible) blue ribbon model # According to the manual the following (I think) should work: transparency 80,s #0 # I expected to see the green surface to become 80% transparent and the blue ribbon model to shine through. # No luck. What am I missing ? BTW the page https://www.cgl.ucsf.edu/chimera/current/docs/UsersGuide/midas/transparency… seems to be missing the last example concerning transparency of surface patches. Thanks, Lothar

2 3

scripting & density
by Dougherty, Matthew T 12 May '17

12 May '17

Hi, I have a dataset, its values are 1-255. I would like to modify the density values using a script. Specifically, I would like to set density values 50-74 & 90-110 to the value of zero. Is there a way to do that using scripting, or do I need to do that using python? Matthew Dougherty National Center for Macromolecular Imaging Baylor College of Medicine ================================================= =================================================

2 3

surfaces
by Arthur Szabo 12 May '17

12 May '17

Working with a structure that has many domains. I would like to show the surface of three of the domains. I have hidden the ribbon residues of all but the ribbons of three domains. I receive the following error message [cid:image001.png@01D2CB26.2CA19B30] The domains are not contiguous in the structure, but even if I try to show the surface of only one domain I get the same message. And going to the Selection inspector is not helpful since it is not obvious as to how that option assists the surface representation. Over to you Thanks Arthur G. Szabo

2 1

vop scale and vop morph (maybe chimeraX?)
by Oliver Clarke 11 May '17

11 May '17

Hi, When I morph two maps, if they have different mean/sd, I always have to scale the mean and sd of the second map to that of the first, otherwise the morph looks very non-linear - nothing happens until fraction 0.9, and then the morphing happens increasingly fast (so not ideal for visualization). If I normalize one map to the other I get a beautiful, smooth, linear morph. Would it be possible in either chimera or chimeraX to automate this? Either to add an option to vop scale to scale one map directly to the parameters of another (rather than having to use vop measure mapstats) or to have an option for vop morph to put both maps on the same scale? Cheers Oli

2 1

suggestion: if clip planes cross, swap them?
by Oliver Clarke 11 May '17

11 May '17

Hi, Quite often, in aliases and scripts where I am adjusting the clip planes, I get the error “far clip plane placed in front of near clip plane”, or words to that effect. I’ve tried various ways to remedy this but it has to be done on a case by case basis and sometimes I just can’t figure it out. Would there be any possibility for Chimera to rather than triggering an error in such a case, just swap the clip planes when this happens, so the near plane becomes the far plane, and vice-versa? Or is there some other foolproof way to avoid this? I get this error when I want to adjust the hither and yon planes successively - would it be possible to add a command that adjusts them both at the same time, like `section` but with simultaneous independent control over both clip planes? Cheers Oli

2 1

morph map fails with solid representation
by Oliver Clarke 10 May '17

10 May '17

Hi, When I create (using the latest nightly build) a morph between two maps using the “Morph map” GUI, and then I change the representation of the resultant volume to solid, the morph no longer runs, or rather, it appears to run, but the solid volume does not update. This used to work - I used it to create quite a few movies - so I guess it is a bug? Cheers Oli

2 1