- Chimera-users - RBVI Mailing Lists

listen selection command
by Mungo Carstairs (Staff) 07 May '15

07 May '15

Hi, I am trying out a REST listener for selections in Chimera and need help. I can talk to Chimera over REST. I can start an Http listener in Jalview - and verify it in my browser. I have sent this command to Chimera: listen start selection rest http://134.36.162.131:64745/ Then silence. I haven't managed to provoke Chimera into sending me a SelectionChanged notification. I am making selections in the Chimera window - as I can see by the 'Inspect Selection' panel. I have also started Chimera standalone (no REST service) and tried the listen command in the command line, but yet to see any output on a selection. What have I missed or how can I diagnose what I am doing wrong here? Thanks, Mungo Carstairs Jalview Computational Scientist The Barton Group Division of Computational Biology College of Life Sciences University of Dundee, Dundee, Scotland, UK. www.jalview.org<http://www.jalview.org/> www.compbio.dundee.ac.uk<http://www.compbio.dundee.ac.uk/> The University of Dundee is a registered Scottish Charity, No: SC015096

3 5

Re: [Chimera-users] [chimera-dev] VolumeEraser
by Tom Goddard 06 May '15

06 May '15

Hi Alex, Surfnet in Chimera does not produce a volume, only surfaces. It calculates the volume but then computes surfaces and deletes the volume. If you would to measure the enclosed volume of the disconnected pieces produced by surfnet, first make those pieces independently selectable with command sop split #0 where #0 is the id for the surfnet model (use Favorites / Model Panel to find the correct id number). Then select the piece of interest (ctrl click on it), then get its enclosed volume with command measure volume sel To type commands to Chimera use menu Favorites / Command Line. This question belongs on the chimera-users mailing list, not the chimera-dev list which is for programming issues. Tom > On May 6, 2015, at 8:18 AM, Alex wrote: > > Dear Sirs, > I recently started using chimera, please apologise my lack of knowledge. > In order to erase a surfnet volume I am trying to use the Erase volume module, but it doesn't work. Are the surfnet objects available to be used in VolumeEraser functions? Is there another way to study volume intersections? > If you know, please point out the article which describes the procedure for this kind of volume calculation. > > Best regards, > Alex > _______________________________________________ > Chimera-dev mailing list > Chimera-dev(a)cgl.ucsf.edu <mailto:Chimera-dev@cgl.ucsf.edu> > http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-dev <http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-dev>

1 0

PC shut down automatically while using Chimera
by kzhang＠mrc-lmb.cam.ac.uk 06 May '15

06 May '15

Dear Chimera Developers, Recently, I found something really annoying when I was using Chimera. The problem is that when I use chimera to display CryoEM maps(400X400X400, 32 bits), my computer shut down automatically. I don't think there's something wrong with the hardware and coot or pymol is fine. This is not just an accident. It happened quite a few times, especially when I suddenly zoom in, computer is suddenly shut down. Later there would be some error massage related to the instability of the power, CPU self protection "£$%^&# ... when I turned on the computer again. But I don't think there is anything wrong with the power as well, I've run other softwares without any problem. Also, it happens to both Window 7 and CentOS 6.5 in the same PC. So it's obviously hardware level issue related to Chimera. My guess is that there might be something in Chimera that activated the self-protection of CPU or similar things. Any ideas why this occurs and how can I solve it? Best wishes Kai

3 2

imod
by Dougherty, Matthew T 04 May '15

04 May '15

I have recently been getting some imod segmentation files and have been noticing three problems 1) when I read the MRC and imod files I am having a scaling problem, and the datasets do not integrate. For example, if the MRC voxel size is 31.22 31.22 31.22, and the origin index is 0 -114 0, I have to change the the voxel size to 3.122 3.122 3.122 , and the origin index to 0 0 0 so that graphics match correctly. Since there are number of people in the data chain before it gets to me, I thought it might check to determine if this is known problem before going upstream to unknown people to figure out if they are getting the imod output settings correct. 2) The graphics performance with imod segmentation files is sluggish in chimera, not sure what it is in imod. I assume that the format defines the vertices at the highest resolution corresponding with the MRC file. Is there a way to improve the performance on the chimera side? I am not using contouring, just reading the file in default mode. 3) The segmentation has a lot of components, such as vesicles and microtubules, that have different colors. Is there a way to break apart the components so they can be manipulated seperately? E.g., display/hide, change colors, translate and rotate. Matthew Dougherty National Center for Macromolecular Imaging Baylor College of Medicine ===========================================================================

2 2

running script + recording movie
by Dmitry 04 May '15

04 May '15

Dear colleagues, Does anybody know how to run the script in chimera - *.cmd (from windows) and in the same time record everything that script does as a movie? Sincerely, Dmitry

2 1

chimera meeting tomorrow
by Greg Couch 29 Apr '15

29 Apr '15

The agenda is available in advance! Thank you Conrad! Conrad says "feel free to add items" :-) https://plato.cgl.ucsf.edu/trac/chimera2/wiki/2015-4-30

1 1

Auto dock Vina Increasing Exhaustiveness
by Tunc Morova 29 Apr '15

29 Apr '15

Hello! I am using UCSF Chimera, Autodock Vina extension for obtaining conformations of my protein and ligand. In this interface, As you know, I can change the exhaustiveness value between 1-8. However, since my system is more than 30x30x30 A, I need to get my exhaustiveness value more than 8 for getting more accurate results. But I can’t make it more than 8 through Auto dock Vina interface in Chimera. How can I increase this exhaustiveness value ? Btw, Instead of using Opal web service, I am using vina locally. Thank you many times for your help Best Regards Tunc Morova

2 1

Converting sdf file into mol2 format
by Mahendra B Thapa 29 Apr '15

29 Apr '15

Dear Chimera users, I am trying to convert sdf file ( downloaded from* diversity set* data from 'http://scs.illinois.edu/htsf/compound_collection/nci.php') into mol2 format. When I ran the command chimera --nogui processSDF.py as given the previous posting ( http://www.cgl.ucsf.edu/pipermail/chimera-users/2010-March/004974.html) I got the following error messages: Cannot find consistent set of bond orders for ring system containing atom #0.73:1@N1 --- Unknown redo atom type: N3 Traceback (most recent call last): Any suggestions for correcting these errors will be a good help for me. Thank you, Mahendra Thapa University of Cincinnati,OH

3 2

Create an artificial bond between ribbons for 3D printing
by David Bhella 28 Apr '15

28 Apr '15

Dear Chimera users, I am trying to prepare a ribbon diagram for 3D printing. As the molecule is a trimer, I would like to create a join between the ribbons such that the model is sent to the printer as a single part. So, I thought that I might be able to create a bond, but I suspect that the current tools may not be able to achieve this. Ideally I don’t want to have to show side chains, moreover the bond needs to be preserved when exported as STL format and finally it will be quite long. The only tool that would seem to come close to my requirement is the distance measure, however I can’t see how to convert that pseudo bond to a cylinder that will be exported. Any suggestions would be gratefully received. Thanks, D. Dr David Bhella MRC-University of Glasgow Centre for Virus Research Garscube Campus 464 Bearsden Road Glasgow G61 1QH Scotland (UK) Telephone: 0141-330-3685 Skype: d.bhella Virus structure group on Facebook: https://www.facebook.com/CVRstructure Molecular Machines - Images from Virus Research: http://www.molecularmachines.org.uk CVR website: http://www.cvr.ac.uk CVR on Facebook: https://www.facebook.com/centreforvirusresearch

3 3

Delete Bug?
by Korbin West 27 Apr '15

27 Apr '15

Hi all, I'm running some code on Chimera to select only certain chains and nearby aspects, but when I try to delete the extraneous information, Chimera freezes up. I'll detail the commands I use below, and for reference I'm interested in the H chain of 1CT1, but it doesn't seem to work with any of its chains. open 1CT1 zonesel :.h 3.5 extend true select invert del sel It then freezes on del sel. I've tried this with other pdb files and it works fine, but for some reason it stops on this one. For example, it works fine on 1PZ3 for its A and B chains. Is this some kind of bug or is there a work-around to this issue? We looked at the residues and couldn't find anything out of place, so we are not sure what is happening. Much thanks in advance. Best, Korbin West? Wabash College

3 3