- Chimera-users - RBVI Mailing Lists

Fwd: How to display hydrohobic area
by Elaine Meng 23 Aug '22

23 Aug '22

> > From: Kenji MATSUI <s214903z(a)st.go.tuat.ac.jp> > Subject: How to display hydrohobic area > Date: August 22, 2022 at 9:17:37 PM PDT > To: Elaine Meng <meng(a)cgl.ucsf.edu> > > Dear Chimera > Thank you for taking the time to answer my question the other day. > I'm Kenji Matsui, a second-year master's student at a national university in Japan. > > I would like to display the hydrophobicity of the protein around the ligand like the first picture, but I couldn't do it. > How can I do this? > When I actually did it, it turned out to be the second picture. > > I apologize for asking this question so often in your busy schedule, but I would appreciate it if you could confirm it for me. > > First photo > > > Second photo > > Hi Kenji, If I understand correctly, you want to show the amino acid hydrophobicity coloring on the ribbon and sticks, not the molecular surface. When you open the structure, it may already be displayed as ribbon and sticks. Do not show the surface. (Or, if you already are showing the surface, you can hide it with menu: Select... Clear Selection, menu: Actions... Surface... hide) Then you can use the "rangecolor" command to color protein ribbons/sticks by hydrophobicity: rangecolor kdHydrophobicity min dodger blue 0 white max orange red See rangecolor help <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/rangecolor.html> That command is part of the tutorial for surface coloring: <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/tutorials/surfprop.html#h…> However, when the surface is not shown, you can see that this comand also colors the other representations (ribbons and sticks). I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

2 1

Geometric objects
by Reza Khayat 18 Aug '22

18 Aug '22

Hi, Can the size of geometric objects be changed? For example, can I make the ellipsoid drawn by command "measure inertia #0:167-285.A" smaller? Thanks. Best wishes, Reza Reza Khayat, PhD Associate Professor City College of New York Department of Chemistry and Biochemistry New York, NY 10031

2 3

Question regarding RMSD
by ALI, MUNIRA (PGT) 16 Aug '22

16 Aug '22

Good morning, I have conducted a superposition between two of the same protein where one was obtained by X ray and the other was predicted by alphafold. I wanted to use the RMSD value of the alignment rather then just have qualitative results but I am unsure of how to interpret the values given by chimera. When I get the output of for example: RMSD between 189 pruned atom pairs is 1.164 angstroms; (across all 553 pairs: 10.750), what exactly do these two outputs mean, which one should I be using and how exactly do I interpret this? Kind regards, Munira

2 1

Trouble generating surface
by Heilman, Destin 12 Aug '22

12 Aug '22

Hi, I’m trying to generate a square surface between 4 markers to trace an atomic plane. I’ve created a marker file (attached) with the positions of the 4 atoms and when I select all markers and use the Volume Tracer tool to generate the surface, I see it show up in the Model Panel but it is not visible (see screen shot - I’m trying this in a random PDB file to test). The Volume Tracer tool also says “No surface” despite the Traced surface showing up in the Model Panel. I notice that there is no color next to the traced surface as well. It’s likely something silly I’m missing but I would appreciate help with this. Thanks. DH Destin Heilman, Ph.D (he/him/his) Professor of Chemistry and Biochemistry Chair, Undergraduate Studies Director, UMass MQP Project Center Department of Chemistry and Biochemistry Worcester Polytechnic Institute 100 Institute Road, Worcester MA 01609-2280 Goddard Hall 103B Office: 508-831-5396 Lab: 508-831-5386 [cid:787efcd6-e2fa-4b91-a11d-7b66c303cbed@prod.exchangelabs.com]

2 1

ASKING FOR HELP WITH INTERPRETATION OF RR DISTANCE MAPS
by Ernest Matambo 08 Aug '22

08 Aug '22

Dear Sir/Madam, I am using Chimera 1.16 to compare two protein structures: one with mutations and a reference. I would like to calculate residue-residue distance of the substitute amino acids to the reference. I have used chimera to come up with a graph of the difference but I am struggling to interpret it. Any help will be greatly appreciated. Regards, Ernest

2 1

Fwd: Making Fusion Proteins using Chimera
by Eric Pettersen 04 Aug '22

04 Aug '22

> Begin forwarded message: > > From: Milad Mapar <milad.mapar(a)yahoo.com> > Subject: Making Fusion Proteins using Chimera > Date: August 4, 2022 at 6:26:46 AM PDT > To: "pett(a)cgl.ucsf.edu" <pett(a)cgl.ucsf.edu> > > Dear Eric > > Hello > > With thanks to your support on Chimera, could you please help me to make a Fusion Protein using Chimera 1.16 > > Any links to tutorials or hints would be appreciated > > Many thanks > > Pharmaceutical Biotechnology PhD Student > Milad

3 2

Help Coordinating Metal Atom to an Amino Acid (Cysteine)
by Sydney Marchi 01 Aug '22

01 Aug '22

Hello Chimera Software Developers, I am having a lot of trouble coordinating a metal atom (using Zinc in place of Cr) to the nitrogen, oxygen, and potentially sulfur atom on cysteine. The two main problems that I am having are getting the geometry I need, which is octahedral, where the metal is also coordinated to two-three water molecules as well as eventually the N-7 of guanine. I am trying to build and minimize the Zn-Cysteine model first though before incorporating it into a DNA oligo. I can't seem to get the geometry I need but beside from that, I have tried to minimize the structure using Amber with an undesired geometry just to test if it will run, and it doesn't let me. I have read the reply log and I believe this is due to the atom labeling on cysteine being the issue. But changing the atoms names is a coding problem, and I don't know anything about coding. I tried building cysteine on my own as a potential fix in place of using the prebuilt model but ran into the same problem where it would not minimize my structure. I need this model for my dissertation, so any help would be greatly appreciated. I can attach any files that you may need, set up a zoom meeting, whatever is easiest for you. I know this is probably not the most conventional use for this software, but I really need to figure this out, and I don't have enough knowledge to tinker with it on my own anymore. Thank you for any feedback. Best Regards, Sydney Marchi PhD Candidate, Chemistry Office: Shelby Hall, 3043 University of Alabama

2 1

Question about equivalent command in Chimera
by Thu Nguyen 28 Jul '22

28 Jul '22

Good afternoon, I want to ask if we have any command in Chimera that is similar to the command "volume cover" in ChimaraX. My goal is to create a map and pdb file of individual chains from the whole structure. For example: > open 12554 from emdb > open 7ns0 > volume cover #1 atomBox #2/A1 pad 1.0 > save 12554_A1.mrc models #3 Could you tell me how I can do this using Chimera commands? Thank you very much. Best regards, Thu

3 4

Re: [Chimera-users] How to show hydrophobility clearly
by Elaine Meng 27 Jul '22

27 Jul '22

Hi Kenji In this latest message, you are using one method that shows the pocket surface only, like in the tutorial. Your image after step 1 of what you tried looks OK to me: But if you are not happy with that, I am guessing you do not want this method. If you want it to look more like this example image with the labeling "hydrophobic pocket" and "allosteric tunnel" ...then you need to use a DIFFERENT method that includes clipping: showing the whole surface of the protein and then using clipping to slice. We already discussed this method, and you were already using this method the first time you asked the question: <https://www.rbvi.ucsf.edu/pipermail/chimera-users/2022-July/018741.html> <https://www.rbvi.ucsf.edu/pipermail/chimera-users/2022-July/018746.html> With that method, all you can do is to move and rotate the structure and move the clipping (either global clipping plane with Side View tool or surface-only clipping with Per-Model Clipping, both mentioned in previous replies) to try to get a good view. However, different pockets are different shapes and depending on the shape of your pocket it may not be possible to make an image that clearly shows what you want. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Jul 26, 2022, at 6:40 PM, Kenji MATSUI <s214903z(a)st.go.tuat.ac.jp> wrote: > > Dear Chimera > > Thank you for taking the time to answer my question the other day. > > I'm Kenji Matsui, a second-year master's student at a national university in Japan. > > I am looking at ligand-protein interactions and how they affect binding affinity. > > Therefore, I would like to examine the hydrophobicity and hydrophilicity around the ligand in the figure(third) > > If you know of any, could you please let us know? > > I tried to show what you mentioned in your email.(clip off, mclip) > > I apologize for asking this question so often in your busy schedule, but I would appreciate it if you could confirm it for me. > > <image.png> <image.png> > > The picture I want to show > <image.png> > > Tried thing > 1. clip off +~ribbon > <1edf41f0-9f2e-4921-92fe-19399979fd97.png> > > 2.m clip > <image1.png> > > > > > . > --------------------------------------------------------------------------- > > > Kenji Matsui > Graduate School of Tokyo University of Agriculture and Technology　M2 > 2-24-16, Nakamachi, Koganei-shi, Tokyo 184-8588, Japan > Mail: s214903z(a)st.go.tuat.ac.jp > <Hydrohobility_1P8D_LXR_LBD_mono_24,25-epoxycholesterol.pyc>

2 1

Help with Fetch ID from UNIProt
by Tina Wright 26 Jul '22

26 Jul '22

Hi there, I have worked my way through the majority of the Chimera tutorials and thought I would try to Fetch ID of Human SP-B (P07988) from UNIProt but unlike the tutorials, it will not upload an image. Can you please help? Many thanks Tina Wright

2 2