- Chimera-users - RBVI Mailing Lists

anti-aliasing in mac version
by Grigore Pintilie 22 Dec '08

22 Dec '08

If I'm not mistaken it looks like anti-aliasing is not used in the mac build of chimera... is there a way to enable this? I'm using a Macbook pro with the nvidia card and Mac os X. Greg

2 4

NMR-Style structures
by Eric Pettersen 18 Dec '08

18 Dec '08

On Dec 18, 2008, at 2:28 PM, Huang, Shengyou wrote: > Is any way for Viewdock in Chimera to open a pdb file with NMR-style > structures so that I can view those NMR-style structures one by one? Yes, you can use ViewDock for that. When ViewDock asks you what the file type is, choose either "Dock 3 or 3.5", "Dock 3.5.x single", or "Dock 4, 5 or 6". Then the normal ViewDock interface will come up. There won't be much information in the various fields because an NMR PDB file doesn't have the embedded information that a DOCK output file does, but nonetheless you can click through the list of structures like normal. Another possibility is to open the NMR file as a trajectory (MD/ Ensemble Analysis->MD Movie) and play through the conformations that way. You could also use other analysis capabilities of the MD Movie tool, such as the RMSD map function. You might also want to try out the Ensemble Cluster tool, which will cluster your NMR ensemble and let you look at representative structures from each cluster. It sounds like you have a lot of conformations, so the Ensemble Match (compare your N structures in an NxN table) and Tile Structures (show all the conformations at once tiled in a grid on the screen) are probably not as useful as they would be for smaller ensembles. --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

2 1

Stereo view
by Eric Pettersen 18 Dec '08

18 Dec '08

On Dec 18, 2008, at 2:28 PM, Huang, Shengyou wrote: > Another question is how to see a stereo view of a structure in > Chimera. Do I need a pair of special glasses for that? You can use the Camera tool (Stereo) to make Chimera show either a cross- or wall-eyed stereo view. You don't need special glasses to use those modes, but you do need to be able to cross or unfocus your eyes (respectively) to get the two images to merge. Some people have difficulty doing that. The other stereo modes mentioned on the page I linked to do require special glasses, and are described in detail on that page. --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

info about energy in the minimize module
by Bruno Villoutreix 18 Dec '08

18 Dec '08

Hello not sure this is the right place to ask... when running minimization in Chimera, do you have a window that show the energy values before and after the process ? or should this be done via a terminal window using the nogui option ? maybe the info is here around but could not find it so far many thanks Bruno

2 1

possibilities to save parts of models (selection)?
by Sebastian Kruggel 17 Dec '08

17 Dec '08

Hi all, is there a simple way to save incomplete models (eg the current selection)? The write command seems to work only with complete models and not with atomic specifications and the split command does only give me the possibility to split complete chains. Probabaly I just don't see something *very* easy... Thanks for help! Sebastian -- Sebastian Kruggel Institut für Pharmazie Bundesstr. 45 | Raum 112 D 20146 Hamburg Tel +49(0) 40 42838 3626

2 1

Re: [Chimera-users] (Thermal ellipsoids) anisotropic temperature factor ellipsoids
by Eric Pettersen 16 Dec '08

16 Dec '08

On Dec 11, 2008, at 3:43 PM, David Chenoweth wrote: > Hi Eric, > Thank you very much for the ellipsoid script! I really appreciate > your help and I think this will do the trick for now. I have been > learning some python on my own and I was wondering if you have some > good beginner examples of scripts for making geometrical shapes, > changing size and color, orientation, etc. that work in chimera. Hi David, You can show cones, arrows, boxes, and a variety of simple geometric shapes by opening a BILD format file in Chimera: BILD format. It may be a little awkward having a script write a temporary file, so instead you can use a StringIO object, as described here: [Chimera-users] BILD object question You can also use the 'shape' command to draw spheres, cylinders, and icosahedrons. You can run any Chimera command from Python by using Chimera's 'runCommand' function, e.g.: from chimera import runCommand runCommand("shape sphere center ligand color dodger blue radius 25") Feel free to ask more questions! --Eric

1 0

Re: [Chimera-users] (Thermal ellipsoids) anisotropic temperature factor ellipsoids
by Tom Goddard 16 Dec '08

16 Dec '08

Hi David, Ok I see now, it's a matter of choosing the size of each ellipsoid to have a 50% chance of finding the atom in that volume. This shouldn't be too hard but I'll let Eric tackle it if he has time. Tom David Chenoweth wrote: > Hi Tom, > > Here is the description of the thermal ellipsoids and option to change > the probability lavel from the Raster3D page. > > -prob Plevel > By default, isosurfaces are drawn to enclose the 50% probability > level in the probability density function described by the Uij values > in the ANISOU record. The -prob option allows you to select a > different probability level instead. If 0<Plevel<1 this value is > interpreted as a fraction; if Plevel > 1 this value is interpreted as > a percent. > > http://skuld.bmsc.washington.edu/raster3d/html/rastep.html > > -Dave > > > On Dec 12, 2008, at 10:27 AM, Tom Goddard wrote: > >> Hi David, >> >> By probability level do you mean occupancy? You could change the >> script to show only atoms with > 50% occupancy by changing: >> >> for a in atoms: >> perMol.setdefault(a.molecule, []).append(a) >> >> to >> >> for a in atoms: >> if a.occupancy > 0.5: >> perMol.setdefault(a.molecule, []).append(a) >> >> Tom >> >> >> David Chenoweth wrote: >>> Hi Tom, >>> >>> Thanks for the script and all the help. The script works great, but >>> I was just wondering if there is a way to set a probability level >>> (50%)? >>> >>> Thanks again, >>> Dave >>> >>> On Dec 12, 2008, at 9:58 AM, Tom Goddard wrote: >>> >>>> The script for drawing aniosotropic b-factor ellipsoids makes uses >>>> 1280 triangles per ellipsoid surface which slows down your graphics >>>> for cases with more than 1000 ellipsoids. You can reduce the >>>> "subdivision_levels = 3" in the script to "subdivision_levels = 1" >>>> to use just 80 triangles, or to a value of 2 for 320 triangles. >>>> The number of triangles controls how smooth the ellipsoid looks (T >>>> = 20 * 4^S, S = subdivision_levels). >>>> >>>> Tom >>>> >>>> >>>> Eric Pettersen wrote: >>>>> On Dec 10, 2008, at 3:41 PM, David Chenoweth wrote: >>>>> >>>>>> Dear Chimera team, >>>>>> >>>>>> It looks like preserving PDB ANISOU in Chimera is now a solved >>>>>> problem and I was just wondering if the ability to display >>>>>> anisotropic temperature factor ellipsoids would be added soon. >>>>>> Our small molecule lab and molecular observatory at Caltech is >>>>>> starting to use Chimera and I think small molecule >>>>>> crystallography labs in general would use Chimera more if this >>>>>> feature were available. I do have to admit that I am interested >>>>>> in this feature for selfish reasons. I am using Chimera for >>>>>> several publications and for the graphics in my thesis which, has >>>>>> to be finished in the next couple of weeks, and I would really >>>>>> like to use this feature. >>>>> >>>>> Hi Dave, >>>>> Yes, reading/preserving the ANISOU info lays the groundwork for >>>>> eventually showing anisotropic ellipsoids. There's still a lot of >>>>> work to go before showing the ellipsoids becomes a usable feature >>>>> of Chimera. It might make it into our next release (middle of >>>>> next year) and it might not. As a stopgap, I've attached a script >>>>> that will show ellipsoids for any currently selected atoms. You >>>>> can run it by simply using File->Open or the "open" command. The >>>>> first two lines of the script control the size and color of the >>>>> ellipsoids, so change them if you like. The script leverages some >>>>> code that Tom Goddard wrote for showing principal axes of inertia >>>>> as an ellipsoid. >>>>> Good luck with the thesis! >>>>> >>>>> --Eric >>>>> >>>>> Eric Pettersen >>>>> UCSF Computer Graphics Lab >>>>> http://www.cgl.ucsf.edu >>>>> >>>>> ------------------------------------------------------------------------ >>>>> >>>>> >>>>> ------------------------------------------------------------------------ >>>>> >>>>> >>>>> _______________________________________________ >>>>> Chimera-users mailing list >>>>> Chimera-users(a)cgl.ucsf.edu >>>>> http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users >>> >

2 1

making ribbon representaiton
by Bala subramanian 13 Dec '08

13 Dec '08

Hello all, I have a pdb file of a RNA duplex containing only the Phosphate atoms. How to make chimera to draw the ribbon representation. This is possible in vmd by using Tube as graphic style but i want to know if i can make it in Chimera too. Bala

2 1

length of a curved alpha helix
by Anindito Sen 12 Dec '08

12 Dec '08

Dear All I was wondering as how can I measure the length of "curved" alpha helix. Thanks Andy Dr. Anindito Sen (Ph.D) Research Associate , Dept. of Biochemistry and Molecular Genetics University of Virginia Box 800733 Charlottesville, VA 22908

3 2

problems before even getting to the plate...
by Jon Kenniston 12 Dec '08

12 Dec '08

Howdy, Trying to run latest Chimera release version 1.3.2577 on my OSX 10.4.11 with X11 version 1.1.3 and while the chimera program opens, I cannot open a PDB (or at least I can't see the opened PDB - no error message, and bottom left of chimera screen states "Opened XXX.pdb" for about a minute until it goes to blank). Should I try installing an older version of chimera? Any help would be much appreciated. Thanks, Jon

4 4