- Chimera-users - RBVI Mailing Lists

How to Create Isopotential Contours, not Surfaces, with Chimera
by Charles Letner, Ph.D. 19 Aug '08

19 Aug '08

Hello all, I have a map of electrostatic potentials. Using volume viewer I am able to display the surfaces at any potential value I would like (as well as multiple values by having multiple bars in the volume viewer histogram). Now, I would like to be able to take a slice through that potential surface and see a line associated with a given value of the potential in that slice - call that the contour. I would like to have multiple potential contours, each with a different constant value in that contour (-10 for one contour, -20 for the next, -30 for the third, and so on- call these the iso-potential contours). This would allow the contours of potential to be seen in a single plane. Seems like I am so close using planes but that just isn't working. Am I approaching this right and if so any hints would be appreciated? If I am off base with the approach, I sure would appreciate a nudge in the right direction? Cheers, Chuck

3 3

Flipping between alternate conformations (depiction/movie)
by David Chenoweth 19 Aug '08

19 Aug '08

Dear Chimera team, Is there a movie command that can easily depict the interconversion between two alternate conformations in a nucleic acid or protein residue (designated conformation a and b) within a pdb file. I am really trying to illustrate with a movie how the phosphates flip between two well defined states in an ultra-high resolution DNA crystal structure using a chimera movie. Thanks in advance, Dave Chenoweth ********************************************** David M. Chenoweth California Institute of Technology Division of Chemistry and Chemical Engineering Mail Code: 164-30 1200 California Boulevard, 91125 Pasadena California, USA Phone: 626-395-6074 Email: dchen(a)caltech.edu **********************************************

3 4

Question about Measure Volume and Area
by Patrick Redmill 18 Aug '08

18 Aug '08

Hi all, I am using the the calculate "Area and Volume" option in Chimera to estimate the SASA and excluded volumes of a family of fullerene materials. I need to calculate the area and volume using two different probe sizes (1.4 and 2.0, to be specific). For most of my particles, you see that the volume and area are relatively insensitive to a change in probe size (which I would expect). For one particle, however, I find the results to be quite different and unintuitive. For instance: 1.4: Area: 1174 Volume: 3534 2.0: Area: 1692 Volume: 2493 My (perhaps wrong??) assumption is that the area calculator uses a Connolly algorithm. If that is the case, I can't understand why a larger probe would give a larger area (smaller probes samples more surface). Also, why would a larger probe give a larger volume? Again, I thought the volume calculator used a Voronoi algorithm, which, to me seems independent of probe size. Any idea what may be wrong about my understanding? I've attached a .pdb of the molecule in question if you'd like to take a gander. Thanks in advance! ~Patrick

4 5

stereo
by Matthew Dougherty 16 Aug '08

16 Aug '08

I have been using chimera/macAqua with sequential stereo with no problems on a CRT. I am running into problems using the depth-q stereo projector because of the way their frame buffer works. Their left and right is inverted relative to the CRT. On other packages I activate a left/right image swap to get around this. Is there something I can do to achieve this on Chimera? Matt National Center for Macromolecular Imaging

8 14

Fwd: Question about Measure Volume and Area
by Elaine Meng 15 Aug '08

15 Aug '08

Begin forwarded message: > From: Elaine Meng <meng(a)cgl.ucsf.edu> > Date: August 15, 2008 12:11:33 PM PDT > To: Patrick Redmill <patrickredmill(a)gmail.com> > Cc: Elaine Meng <meng(a)cgl.ucsf.edu> > Subject: Re: [Chimera-users] Question about Measure Volume and Area > > Me again, I just wanted to quickly reiterate that if you want > analytical values, just look in the Reply Log after first showing/ > creating the surface. That will report the analytical values, and > not just the totals but also the values for each component > (disconnected blob, so outer surface and inner surface are two > components), and also both SAS and SES areas even though only the > SES is actually displayed in Chimera. > > So for molecular surfaces, there isn't really any reason to use > Measure Volume and Area or Measure and Color Blobs. Those tools are > mainly needed for other, nonmolecular surfaces. I didn't present > this clearly in the previous messages, sorry. > Best > Elaine

1 0

Re: [Chimera-users] quick angles question
by Tom Goddard 15 Aug '08

15 Aug '08

Hi Jeff, Here is a Python script to report the angles made by bonds attached selected atoms. Just select the atoms, then open the script. Output will be printed to the reply log. Tested in Chimera 1.2548 but should work in much older versions. Tom Jeff Triffo wrote: > hi Tom, > > if I have a Chimera marker file full of interconnected markers, is > there a quick/easy way to report all the angles formed in the > meshwork? (screenshot attached) > > I figure the easiest way is to cycle through the markers and survey > the angles it makes with each attached marker, but I don't know how to > do that (but it sounds like something that is probably straighforward > in python) > > thanks for any input there, > > -Jeff > # ----------------------------------------------------------------------------- # Report all angles made by bonds originating from selected atoms. # from chimera import selection, angle atoms = selection.currentAtoms() print '%d atoms selected' % len(atoms) c = 0 for a in atoms: bonds = a.bonds for b1 in bonds: for b2 in bonds: if b1 < b2: a1 = b1.otherAtom(a) a2 = b2.otherAtom(a) t = angle(a1.coord(), a.coord(), a2.coord()) print ('Angle %s %s %s = %.3f degrees' % (a1.oslIdent(), a.oslIdent(), a2.oslIdent(), t)) c += 1 print '%d angles reported' % c import Accelerators.standard_accelerators as sa sa.show_reply_log()

1 0

Re: [Chimera-users] midas/6155 (Chimera error)
by Eric Pettersen 14 Aug '08

14 Aug '08

On Aug 14, 2008, at 1:23 PM, Christine Deillon wrote: > Hi Eric, > > I try to save a movie of a collagen molecule (cylinder shape) > just moving around its major axis (along the molecule) for about > 15 secondes, then I would like to play the movie in the microsoft > power point program > is it possible to do that with chimera? > > Christine Hi Christine, Yes, absolutely you can do that. There is a Chimera tutorial that covers movie-making in good detail here: Movie Making in Chimera The "Spin Movie" section of the tutorial is almost exactly what you are asking for. Issues with embedding movies into PowerPoint are at the very end of the Movie Recorder documentation page: problems in PowerPoint --Eric Eric Pettersen UCSF Computer Graphics Lab http://www.cgl.ucsf.edu

1 0

version 1.2540 stability
by James Fethiere 14 Aug '08

14 Aug '08

Hi, I just upgraded my May version with the last version of Chimera for PC and am having stability problems. Every now an then (every 10' or so), chimera freezes and the cursor flickers for a couple of seconds; then all goes back to normal. Sometimes, it just crashes completely. Is this last version more demanding on memory? Thanks James

2 3

Re: [Chimera-users] calculation of volume
by Elaine Meng 14 Aug '08

14 Aug '08

Hi Navnit, Sorry, I don't know of a way to calculate the van der Waals volume in Chimera. You can see the VDW volume, of course, by simply displaying the atoms in the sphere representation, but that does not give the volume value. In theory, you could get values closer to the VDW volume by calculating molecular surface with smaller and smaller probe radius. In practice, this tends to increase the number of surface calculation failures, and currently the smallest allowed probe radius value is 0.5 angstroms. Best, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html On Aug 14, 2008, at 7:01 AM, Navnit Kumar Mishra wrote: > Hi Elaine; > > Thank you for so detailed description. I am interested in measuring > the compactness of the complex during the simulation, I think the > calculation of the ratio of molecular volume to van der waals volume > provides the compactness. I have tried the procedure as you > suggested to calculate the molecular volume, the value in replylog > file is in two digits precision, for these calculation can I get the > value in four digits precision. I am using latest chimera version > 1.2540. I can calculate the total van der waals volume using the van > der Waals radii for each atom excluding the hydrogen atoms. Is there > a way in chimera to calcualte the van der waals volume. I would be > thankful to you for any suggestions. > > with regards, > navnit

3 3

Color zone with transparency
by Tom Goddard 14 Aug '08

14 Aug '08

Daniel Wilson wrote: > Hi Tom, > > ... > > The other thing I noticed is that you lose transparency on a whole volume when you color zone one region of it? or am I making something wrong? Is it not possible to have a single volume with two different colours and transparent? > > Thanks for you advice and kind offer, > regards > Daniel > Hi Daniel, When I make a transparent surface for a volume by pressing the volume dialog color button and making opacity 0.5 and then use color zone to color part of the surface (using a PDB model), the transparent part far from the zone remains transparent. Also works if select the volume surface and use the Actions / Surface / Transparency menu then color zone. What are the exact steps you use when it fails to preserve transparency? Tom

1 1